Presas

BTS-MF75 Ballenpresse Waste Baler

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The BTS-MF75MK is the ideal multi-chamber baler for compacting your loose cardboard and film waste into bales of up to 75 kg. Different materials can be collected in two or more press chambers placed side by side, and once a chamber is full, the movable pressing head is simply shifted over, and the material is compacted. By compressing these waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and return the material properly to the recycling loop. Pressing force: 3.5 tonnes Bale weight: up to 75 kg (depending on material) Bale size: 700 H (var.) x 700 W x 500 D mm Machine dimensions: 2005 H x 2050 W x 872 D mm Machine weight: 562 kg Transport height: 2005 mm Feed opening: 700 W x 500 H mm Pressing cycle: 35 seconds Motor: 1.5 kW, 13 Amps Power supply: 220 - 240 V (single phase) Noise emission: 68 dB User-friendly lever control Bale trolley for easy bale removal Retaining claws to minimize material spring-back Short handling times as one chamber is always available for loading Holder for strapping bands Hfsdova Hq Depfx Af Def A quality product "Made in Europe" Suitable for compacting: Cardboard Film Big bags Textiles Light recyclables Additional options: Annual maintenance with safety (UVV) inspection Machine color to RAL PLC control with automatic press cycle, bale-ready indicator, and E-stop with key Additional press chambers (up to 6 in total) Strapping bands Twin-chamber baler, paper press, waste paper press, cardboard baler, cardboard box baler, film baler, paper baler, waste baler, refuse baler, recyclables press, waste compactor, waste press, general waste press

Būklė: paruoštas naudoti (naudotas), 🔧 Hauptspezifikationen Schneidsystem: Vierwellen-Konfiguration mit zwei Schneidwellen und zwei Räumwellen. Schneidscheibendurchmesser: ca. 280 mm (11 Zoll). Abmessungen der Schneideinheit: Arbeitsbreite 1.000 mm, Länge 700 mm. Aufgabeöffnung: ca. 1.400 mm x 1.600 mm. Hodpswnx Uiofx Af Djff Motorleistung: In der Regel ausgestattet mit zwei 18,5 kW Motoren. Betriebsgeschwindigkeit: Langsamlauf bei ca. 25 U/min für hohes Drehmoment und geringe Geräuschentwicklung. Gewicht: ca. 2.500 kg.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Baler BTS-MF75 in stock and available for immediate delivery The BTS-MF75 is the ideal baler for compacting your loose cardboard and film waste into bales weighing up to 75 kg. With an additional pressing insert, it is also suitable for compressing individual metal and plastic containers as well as cans. The baler impresses with its simple and safe operation and large loading volume. By compacting these waste and recyclables, you achieve a volume reduction of up to 90%, significantly lower your disposal costs, and ensure proper return of the material to the recycling loop. Pressing force: 3.5 tons Bale weight: up to 75 kg (depending on material) Bale size: 1000 H (variable) x 700 W x 500 D mm Machine dimensions: 2335 H x 1040 W x 750 D mm Machine weight: 278 kg Transport height: 2335 / 1800 mm (if required) Hfsdeut Tk Hjpfx Af Dsf Loading opening: 700 W x 698 H mm Pressing cycle: 24 seconds Motor: 1.5 kW, 13 Amp Power supply: 230 V (single phase) Noise emission: 68 dB User-friendly lever operation Bale trolley for easy removal of bales Retainer to reduce material spring-back Strapping holder A quality product 'Made in Europe' Suitable for compacting: Cardboard Film Cans and lightweight metal containers Canisters and lightweight plastic containers Textiles Lightweight recyclables Additional options: Annual maintenance with safety inspection (UVV) Machine colour selectable according to RAL Can pressing insert PLC control with automatic press cycle, bale-ready signal, and key-operated E-stop Belt bale ejector + PLC (instead of bale trolley) Strapping bands Power supply 380 – 400 V (three phase) Baler, paper baler, waste paper baler, cardboard baler, cardboard box baler, film baler, paper bale press, waste baler, waste press, recycler press, waste compactor, refuse press, residual waste press

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The BTS-MF75MK is the ideal multi-chamber baler for compacting your loose cardboard and film waste into bales of up to 75 kg. Different materials can be collected in two or more press chambers placed side by side, and once a chamber is full, the movable pressing head is simply shifted over, and the material is compacted. By compressing these waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and return the material properly to the recycling loop. Pressing force: 3.5 tonnes Bale weight: up to 75 kg (depending on material) Bale size: 700 H (var.) x 700 W x 500 D mm Machine dimensions: 2005 H x 2050 W x 872 D mm Hfedpevugzrsfx Af Djf Machine weight: 562 kg Transport height: 2005 mm Feed opening: 700 W x 500 H mm Pressing cycle: 35 seconds Motor: 1.5 kW, 13 Amps Power supply: 220 - 240 V (single phase) Noise emission: 68 dB User-friendly lever control Bale trolley for easy bale removal Retaining claws to minimize material spring-back Short handling times as one chamber is always available for loading Holder for strapping bands A quality product "Made in Europe" Suitable for compacting: Cardboard Film Big bags Textiles Light recyclables Additional options: Annual maintenance with safety (UVV) inspection Machine color to RAL PLC control with automatic press cycle, bale-ready indicator, and E-stop with key Additional press chambers (up to 6 in total) Strapping bands Twin-chamber baler, paper press, waste paper press, cardboard baler, cardboard box baler, film baler, paper baler, waste baler, refuse baler, recyclables press, waste compactor, waste press, general waste press

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 22 605 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 400 kg, įėjimo srovė: 238 A, bendras svoris: 36 000 kg, alyvos bako talpa: 1 300 l, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and a 10-fold cross-tying system. Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Prepress force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume per press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale dimensions: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a Bulk density of 30 kg/m³: approx. 16 t/h Bulk density of 50 kg/m³: approx. 25 t/h Bulk density of 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank capacity: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Baler dimensions assembled with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Remarks: The baler has been partially refurbished, serviced in our workshop, tested after completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. Hodpfjvf E Avsx Af Deff The following refurbishment works have been carried out: - Derusting and partial repainting of the baler - Complete draining of the hydraulic oil tank, replacement of oil and air filters - Refilled with new hydraulic oil - Replaced all hydraulic hoses - Disassembled, overhauled, and reassembled main hydraulic cylinder, two pre-press flap cylinders, and channel press cylinder: honed cylinder tubes, renewed all seal kits, and carried out final pressure test - Dismantled pre-press flap with bearings and bearing brackets. Removed and re-welded 1st and 3rd arc segment - Renewed both bearings on pre-press flap shaft - Renewed upper material retainer on pre-press flap frame - Dismantled the press ram, inspected and replaced both front running wheels - Removed and replaced material retainers and wear profiles on sides and bottom of the press ram - Dismantled, overhauled horizontal and vertical needle and tying units, replaced plastic sliding plates, bearings for twister shafts and wire guide pulleys on the needle heads - Replaced both bronze slide rails left and right in press ram frame cover - Renewed both wire redirect units left and right, incl. bale retention clamps - Fully renewed wire feeding unit incl. hydraulic cylinder under the needle passages - Welded and smoothed out wire grooves on the bottom and side walls of the press channel - General maintenance and service work according to manufacturer’s recommendations - Baler tested in both manual and automatic mode after completion of refurbishment, accepted and stored All technical information is provided without liability for errors or omissions.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: HBC 140 2x75kW 2001 (210-008-01), spaudimo jėga: 155 t, balo svoris: 1 500 kg, slėgis: 250 juosta, galia: 150 kW (203,94 AG), paskutinio kapitalinio remonto metai: 2024, Įranga: dokumentacija / vadovas, Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Pers (2x75kW) Pers: Gewicht: 47.100 kg Bouwjaar: 2001 Variabele kanaaldrukregeling Kunststofklep Anti-ratten bekabeling Urenstand 0 na volledige revisie Deze pers wordt volledig gereviseerd verkocht volgens de ‘Bollegraaf OEM Certified Refurbishment Standards’. Dit omvat 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene principes van de revisie Reiniging & demontage Voorafgaand aan de daadwerkelijke revisie wordt de pers volledig gereinigd en in onze revisiewerkplaats gedemonteerd. Toleranties Na demontage worden de toleranties van alle stalen componenten gemeten en waar nodig opnieuw gelast. Dit geldt ten minste voor de volgende onderdelen: • Presschuif, • Frame, • Perskanaal, • Voorpersklep Na demontage en inspectie wordt de presschuif opnieuw opgelast en voorzien van nieuwe schuifwielen. De beschermroosters en de voorpersklep worden deukvrij gemaakt en waar nodig gerepareerd. Opnieuw gespoten Na het meten van de toleranties en eventuele reparatie- en laswerkzaamheden, worden alle componenten gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydrauliekleidingen en slangen worden vervangen. De hydraulische componenten worden opnieuw voorzien van pakkingen. De hydrauliekolie wordt ververst. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle aansluitdozen worden vervangen en opnieuw op goed toegankelijke posities geplaatst. Hjdpfxotvau Aj Af Djff Slijtagedelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het perskanaal worden vernieuwd. Alle slijtdelen van beide naaldinstallaties en knopers worden vervangen voor nieuwe. Cilinders: De cilinders worden opnieuw voorzien van pakkingen en indien nodig voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC kast De schakelkast wordt gecontroleerd en gereinigd. Indien nodig worden elektronische componenten vervangen door nieuwe. De PLC en HMI (bedieningsinterface) worden vervangen door de nieuwste Schneider M340-versie inclusief de meest recente software.

Būklė: paruoštas naudoti (naudotas), DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for the economical reduction of recyclable material volumes in industrial and commercial applications: - Cardboard boxes - Foams - PET bottles - Insulation mats - and other pressable materials. DIXI 60 SLD horizontal baler, waste baler with tilting device Technical specifications: - Pressing force: 60 tons - Specific pressure: 6.81 kg/cm² - Power supply: 400V / 7.5kW - Bale dimensions: 800 x 1100 x 1200 mm - Number of bindings: 3 - Bale weight: approx. 370-410 kg - Binding: manual - Feed opening: 990 x 1110 mm - Machine weight: 5,420 kg - Average press cycle: 47 sec - Year of manufacture: 2011-2016 Dixi 80SLD Baler Technical data: - Make: Dixi - Model: 80 SLD - Pressing force: 80 tons - Drive power: 11 kW, 400 V / 32 A - Hopper opening (W x H): 1040 x 1110 mm - Press cycle: approx. 35 s - Throughput: approx. 1,000 kg/h - Bale size (W x H x L): 1120 x 1120 x 1200 mm - Bale weight: depending on material approx. 500–600 kg - Bale binding: triple, manual - Machine dimensions: Hjdora A E Ujpfx Af Doff - Length: 4,200 mm (+ cage 1,600 mm) - Width: 1,830 mm - Height: 2,620 mm - Machine weight: approx. 8,000 kg - Automatic bale ejection - Robust construction for long-term use - Year of manufacture: 2016-2020 - Weight: approx. 8.4 tons - Condition: Used

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: W230-028, spaudimo jėga: 80 t, garantijos trukmė: 24 mėnesiai, slėgis: 250 juosta, galia: 45 kW (61,18 AG), paskutinio kapitalinio remonto metai: 2024, Įranga: dokumentacija / vadovas, This fully refurbished baler is being sold by Bollegraaf Recycling Solutions. It concerns a HBC80 baler (45 kW) with vertical tying. This baler has already been completely overhauled in our refurbishment workshop. The refurbishment is carried out according to the very strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold including 2 years warranty. This press is supplied with the following options: * Mounting frames Hodpfetvat Tjx Af Djff * Intermediate hopper * Bale outlet * Wire spool platforms

Būklė: paruoštas naudoti (naudotas), Mano aukciono objektas yra 4,5 m ilgio ir 0,6 m pločio konvejerio juosta. Galimybė transportuoti. Hfodpfx Aoxgndhjf Djf

Būklė: naudotas, Gamybos metai: 2001, slėgis (maks.): 10 juosta, Screw Compressor Manufacturer: Atlas Copco Model: GA 11 FF Year of manufacture: 2001 Technical Data Manufacturer: Atlas Copco Model: GA 11 FF (with integrated refrigeration dryer) Year of manufacture: 2001 Design: Floor-mounted Control system: Elektronikon Max. operating pressure: 10 bar Motor speed: 3000 rpm Rated power: 11.0 kW Dimensions: L 1.2 x W 0.70 x H 1.40 m Weight: 475 kg All information is provided without guarantee. Hsdpfx Aowivluef Dsff A live demonstration under power is possible at any time in our showroom.