Faneros presas

Ott ST2513/90

Būklė: naudotas, Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, SCM Olimpic K 560 Automatinė briaunų klijavimo staklė, pagaminimo metai 2018, parduodama! Kjdpfx Agow Sw Tkofedi Komplektacija: - Grandininio padavimo greitis: 12/18 m/min - Briaunos storis: 0,4–3 mm - EVA klijai - Plokštės frezavimo mazgas „RT-V“ - Klijų padavimo mazgas „VC-S4.1“ - Briaunos apipjovimo mazgas „K-SEL“ - Briaunos frezavimo mazgas „R-K“ - Briaunos kampų apvalinimo mazgas „ROUND X“ - Briaunos grandymo mazgas „RAS-K“ - Poliravimo mazgas „SP-V“ Techninės charakteristikos: - Konvejerio greitis (dviem greičiais): 12–18 m/min - Min / maks. detalės storis: 8–60 mm - Lipdomos medinės briaunos storis: 0,4–6 mm (8 mm HP komplektacijoje) - Lipdomos ruloninės briaunos storis: 0,4–3 mm - Maksimali ruloninės briaunos ploto vertė: 135 mm² - Ritės laikiklio „lėkštės“ skersmuo: 780 mm - Maksimalus klijuotos briaunos užlaida, lyginant su detale: 2+2 mm - Mažiausias atstumas tarp gabenamų detalių: 600 mm - Minimalus detalės ilgis (kai detalės plotis min 100 mm): 140 mm - Minimalus ruloninės briaunos ilgis: 180 mm - Minimalus medinės briaunos ilgis: 220 mm - Minimalus detalės plotis (kai detalės ilgis min. 210 mm): 95 mm (60 mm opcija) - Praplatinimo atramos plotis: 560 mm - Darbo stalo aukštis nuo grindų: 900 mm Plokštės frezavimo mazgas „RT-V“: - Maksimali nuimamos drožlės plotas: 55 mm² - Maksimali frezavimo storis: 3 mm - Min./maks. detalės storis: 8–45 mm (60 mm opcija) - Variklio galia: 2 x 1,5 kW - Frezos skersmuo: 100 mm - Frezos aukštis: 49 mm (64 mm opcija) - Įrankio apsukų greitis: 9000 aps./min.

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 10006565, Weinig Powermat 1500 Working width: 30 - 310 mm (with tool diameter 93-125 mm) Working height: 100 - 200 mm (with tool diameter 93-125 mm) Number of spindles: 6 Bottom spindles: 2 Right spindle: 1 Left spindle: 1 Top spindles: 2 Spindle arrangement: b-r-l-t-t-b Maximum spindle speed: 8,000 rpm Kdsdpfx Asrq Ebfegfei Spindle diameter: 40 mm Powerlock tool holder Chamfering unit included Separate motor for each spindle Electronic feed with brake, infinitely variable 5-40 m/min Durofer spike-tooth feed rollers Short infeed table, 1.2 m long, with 2 powered rollers above the table Machine table surface with hard coating Manual lubricant pump WEINIG Comfort Set Control system: WEINIG MEMORY PLUS SYSTEM CE mark Declaration of conformity

Būklė: naudotas, Gamybos metai: 2017, Number of spindles: 5 units Working width: 240 mm Planing height: 120 mm Surfacing table length: 2500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Weight approx.: 3,500 kg Control: SCM Control 10 SCM Superset NT with workpiece return ----- Machine fully inspected. Summary: ----- - 5 spindles - Powerful motors - Left and top spindles controlled for width and height - With return system for workpieces to the operator 1st spindle ----- First lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system 3rd spindle ----- First left vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic horizontal positioning / motorised width adjustment 4th spindle ----- First top horizontal spindle Motor with brake: 11.0 kW Kdodpewwl Nlsfx Agfoi Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic radial positioning / motorised height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm SCM Control 10 user interface Including workpiece return system Including used planing heads currently installed. (Technical specifications according to manufacturer – subject to verification!)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, veikimo valandos: 2 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1630, bendras svoris: 7 800 kg, garantijos trukmė: 6 mėnesiai, galia: 85 kW (115,57 AG), A complete production line based on the Di Più BRIK MB100 briquetting press is for sale (complete production line). Di Più BRIK MB100 machine, fully overhauled (factory rebuilt in 2025), ready for immediate operation. The machine is designed for high-performance briquetting, suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory, with all vital parts, cables, wiring, and necessary electrical components replaced. As a result, the machine is in as-new condition and comes with a 6-month Di Più manufacturer's warranty. The machine can produce briquettes with or without a hole, with diameters from 90 mm to 110 mm, from both soft and hard wood, in round or square shapes. The machine can be inspected at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compressing wood, sawdust, and other waste materials into wood briquettes. The ideal input material moisture content is between 8% and 12%, and particle size between 1 mm and 12 mm. Technical specifications: - Production capacity: 1,300 – 2,300 kg/h (with sawdust bulk density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression force: 2,000 – 2,500 kg/cm² - Vertical auger with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for closing the extrusion head: 1.5 kW - Feeder with adjustable-speed auger: 1.5 kW - Oil lubrication system for bronze bearings: 100 liters - Briquette output monitoring sensor (automatic shut-off when material runs out) - Guards for moving parts - Oil pressure sensor - Control panel Kjdjwrp Emjpfx Agfodi - Hopper for input material (accumulator) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for full operation and integration into a briquetting line: ADDITIONAL EQUIPMENT – MB100: - Dosing silo: Made from heavy-duty steel construction. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material feeding is controlled by a level sensor. - 20-meter-long briquette cooling line - Automatic saw for briquette cutting - The saw automatically cuts briquettes to operator-preselected lengths. - Device for the production of briquettes with a hole - Briquetting press head cooling system with chilled water - The system produces 50 liters/minute of chilled water for efficient head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and large energy storage tank with water–refrigerant heat exchanger immersed inside. - Highly efficient fin-pack heat exchanger made of copper tubes and aluminum fins. - 800-liter water tank - Water supply pump (50 l/min – 20 m head – 0.55 kW) with three-way DN25 valves to control cooling water temperature in the briquetting press head. - Digital electronic temperature controller connected to NTC sensor (probe diameter 6 × 52 mm, IP68, AISI 316). OPTIONAL: NOVAPAC packer Optional additional purchase of a NOVAPAC packer, fully compatible with the Di Più BRIK MB100 and other machines, providing an ideal solution for automatic packaging directly after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the last 6 photos.

Būklė: naujas, Gamybos metai: 2024, TECHNICAL DATA Table size: 1100 x 760 mm Ksdpfjfpb Nmsx Agfjdi Table height: 870 mm Spindle: Non-removable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Colour: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Solid German engineering Spindle moulder with single-sided tilting, fixed spindle for a swiveling range from -5° to +45.5° Electronic positioning control for height and tilt adjustment, with zero point reset for height and offset positioning Electronic displays for position and spindle speed 4 spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Push buttons for spindle start and stop Forward and reverse rotation Quick clamping system for cutters Finely planed grey cast iron table with fixed frame support Control panel mounted below the fixed frame support Fence 216, total adjustment via handwheel and LCD display, including cast iron fence plates and aluminium chip guards Machine socket Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Spindle diameter 30 mm, non-removable CE compliant GS tested

Būklė: naudotas, Gamybos metai: 1990, No. 04502 Veneer Press Ott JU 2511/70 Used, Year of manufacture: 1990 Electrohydraulic, approx. 15 kW Aluminum heating plates 2550 x 1100 mm (L x W) Electric heating 4 hydraulic cylinders, each with 80 mm diameter Total pressing force: 70 tons Specific pressing pressure: 2.5 - 3.5 kg/cm² Opening width: 400 mm Push-button control for open – close – stop Kedpfx Ajxwp S Isgfedi Pressure monitoring with automatic readjustment Adjustable limit switch for specific opening width HAWE pump Emergency stop safety pull cord Includes electric cable and 32 A connector Includes electrical diagrams, operating manual as PDF file Transport dimensions approx. 2900 x 1400 x 2000 mm (L x W x H) Weight approx. 3000 kg To avoid possible misunderstandings, on-site inspection by appointment is possible and recommended. Sale as-is Technical specifications, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, with no guarantee Subject to prior sale No warranty applies to used machines. Sale is 'as seen'. Payment terms: Prices plus statutory VAT, payment before collection or shipment Delivery terms: ex works

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, pjovimo aukštis (maks.): 400 mm, juostinio pjūklo ilgas: 5 550 mm, pjūklo juostos plotis: 80 mm, stalo ilgis: 800 mm, stalo plotis: 1 060 mm, darbinio aukščio: 400 mm, - itališkos gamybos - lamelių pjovimo juostinis staklės - nedažytas - labai gera būklė Kedpfxow H Rq Hs Agfjdi - naudotas pjūklas Pjūklas: - ratų skersmuo: 800 mm - didžiausias pjūklo plotis: 80 mm - didžiausias pjovimo aukštis: 400 mm - pagrindinis variklis: 11 kW - pastūmos greičio diapazonas: 2–40 m/min - pastūma su pneumatiniu spaudimu prie kreiptuvo - įvado metalinis slystantis volelis - pjūklo ilgis: 5550 mm - juostos atstumas nuo korpuso: 780 mm - sraigtinis juostos įtempimas - stalo matmenys: 1060x800 mm - darbinis stalas pasviręs 15° kampu - ištraukimo angos skersmuo: 120 mm - pjūklo drėkinimo sistema - kojinis stabdis - lieti ratlankiai - žvaigždės / trikampio paleidimas - maitinimas: 380V - matmenys ilgis/plotis/aukštis: 1600x1100x2400 mm - svoris: 860 kg Pastūma: - metalinis dantytas traukimo volelis - penki pastūmos greičiai su keitimu diržu - volelio aukštis: 30 mm - pastūmos variklis: 0,75 kW - spaudimas

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, minimax ti 55es LL – Spindle Moulder Image shows T 55 i elite s standard version Professional workshop machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting. Robust steel and cast iron construction. Large-dimension grey cast iron milling unit, tiltable up to -45° to the rear. Spindle speeds displayed via LEDs. Quick and easy speed change via eccentric clamping. Reversible direction of rotation (right/left). Height and tilt display accurate to 1/10 mm. Heavy-duty industrial fence: with rack-and-pinion fine adjustment, digital display, aluminium fence jaws, 3-position repeat setting for quick adjustment. Scope of delivery: Aluminium fence jaws Curved milling protection hood Table extensions left and right Model: minimax ti 55es LL Article No.: 5502252 Kdedpfjdqzh Rsx Agfei Technical data: Worktable dimensions: 2500 x 655 mm Sliding table dimensions: — Usable spindle length: 125 mm Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tenoning cutter diameter: 320 mm Spindle tilting range: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400V / 50 Hz / S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Spindle tiltable: Yes, 0 to 45° Height adjustment: Handwheel / electric Tilting adjustment: Handwheel / electric Fence adjustment: manual Height display: Digital display Tilt angle display: Digital display Fence position display: mechanical counter Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 rpm Motor power: 7 kW Motor brake: Yes, automatic Extraction port: 2 x 120 mm Machine length: 2599 mm Kdodpfxeuzkxxe Agfei Machine depth: 900 mm Weight: 655 kg

Būklė: naujas, Technical specifications: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel sanding unit 2 combination sanding units with pneumatic pad Pneumatically actuated sanding pad Abrasive belt size: 970 x 2150 mm Total motor power for both sanding units: 11 kW Feed belt speed with inverter: 16-18 m/sec. Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roller diameter: 150 mm Sanding shoe width: 50 mm Sanding belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: ECO GEAR SYSTEM – mechanical sanding belt oscillation system without compressed air Infinitely variable feed belt speed via inverter 4-20 m/min Automatic star/delta start-up Steel roller on first unit; rubber-coated roller on COMBI unit Electronic table height display Automatic thickness reading device and table positioning Safety switches Automatic machine cut-offs Main motor brake Rubber pressure rollers 2-roller infeed and outfeed tables Available immediately! Kdjdpjg A D Anefx Agfei Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm