Skydo paspaudimas

ORMA ORMA NPC DIGIT 3000/5

Sąlyga: naujas, Gamybos metai: 2026, The ERBA Turbo 60 is a centrifugal finishing machine for deburring, smoothing, and polishing small to medium-sized workpieces. The machine features a digital process timer, a digital speed display, and a dosing pump (wet configuration). The turntable speed can be adjusted via frequency converter. The Turbo 60 is available in both dry and wet versions. It can be optimally linked with the ERBA YE-60 separation unit shown in the images. Technical Data: - Gross volume: 60 L - Drive power: 3.0 kW Kwodpfsn Ut Ilox Af Ijt - Turntable speed: 75 to 300 rpm - Optional equipment: tilt motor, soundproof lid, or separation box Prices are net plus the currently applicable statutory VAT and shipping costs. Some images may show the machine with accessories and options which are available at extra cost. If you are interested, we look forward to hearing from you. We are happy to provide you with non-binding advice. The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations take place by means of telecommunication (email, telephone, messaging portal). As a first step, we will send you a non-binding quotation, which also includes our general terms and conditions (with imprint) and information about your right of withdrawal before any purchase or contract is concluded.

Sąlyga: naujas, High-performance thread cutting machine with leadscrew and optimal safety device to prevent tool breakage. Program mode for single or continuous cycle operation. Electronically controlled motor braking in single cycle mode. Easy leadscrew change via quick coupling. Technical Data UNIMAX 3T GL: Thread cutting capacity: M 4 - M20 Threads per hour: 800 Standard drilling capacity: 28 mm Spindle: MT 3 Thread depth: 90 mm Drilling depth: 120 mm Kjdjgv I Unopfx Af Iswt Throat depth: 260 mm Spindle/table distance: 220 - 600 mm Table surface: 420 x 390 mm T-slot width: 14 mm Column diameter: 110 mm Overall height: 1,300 mm Weight: 250 kg Special motor: 0.9 kW Power supply: 400 V / 50 Hz 9 spindle speeds: 95 / 160 / 200 / 350 / 420 / 450 / 750 / 900 / 1,650 rpm Standard packaging: C - 160x75x125 cm Additional accessories/options: Leadscrew, tap holder, reverse gear disengagement, externally ventilated motor, die holder, flange quill, foot impulse switch, two-hand start, LED machine light, minimum quantity lubrication system, base cabinet.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 4 300 mm, padavimo eiga Y ašimi: 4 300 mm, pjovimo ilgis (maks.): 4 300 mm, pjovimo aukštis su įrėžėju (maks.): 4 300 mm, pjūklo disko skersmuo: 380 mm, HPP 380/43/43, visiškai automatinis pakrovimas su TBP 200/31/22/ Pagrindinis variklis 18,5 kW Mašina veikia puikiai, galima atlikti bandomąjį paleidimą Holzma Profi HPP 380 Ksdpfx Aexvz T Iof Iewt Pjovimo ilgis: 4 300 mm Pjovimo plotis (programiškai valdomas stūmiko judėjimas): 4 250 mm Oro pagalvių stalas: 2 160 x 650 mm, 3 vnt. + 1* 2 810 mm ilgio Centrinis pūstuvas: 1 vnt. su padidintu pūtimo našumu 2 papildomi paruošimo įtaisai Techniniai duomenys: Pjūklo disko išsikišimas: 95 mm Pjūklo vežimėlio padavimas: pirmyn 1–130 m/min, atgal pastovus 130 m/min Pagrindinio pjūklo variklis: 18 kW Pjūkliuko variklis: 2,2 kW, VVSH agregatas, programiškai valdomas, vertikaliai kylantis Maitinimo įtampa: 400 V (+10%/-5%) / 50 Hz Pagrindinio pjūklo variklio elektrinės galios prijungimas 18 kW: 24 kW Power Control CADmatic 4.0 valdymo sistema su 17 colių plokščiu ekranu Etiketavimas su detalių grafika / etiketavimo programa / etikečių spausdintuvas PICA 104

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2015, Juostos plotis: 2000 mm Pjovimo plotis: 300–1700 mm Maksimalus atriedimo skersmuo: 800 mm Maksimalus suvyniojimo skersmuo: 600 mm Pjovimo metodas: skutimosi peiliukas Suvyniojimo velenai: dvigubi suvyniojimo velenai Didžiausias mechaninis greitis: 400 m/min AC servovariklis su įtampos reguliavimu Kwsdpfx Aewvv Hfsf Ijt Juostos vedimas Medžiagų rūšys: BOPP, PET, PE, laminuota plėvelė, plėvelė, popierius

Sąlyga: geras (naudotas), Plaque en marbre Longueur : 3500 mm Largeur : 1500 mm Kodeig Hu Njpfx Af Iewt Épaisseur : 300 mm Hauteur sur pieds : 930 mm Nombre de pieds : 5 pieds 1 petit défaut sur le dessus (L 150 mm x l 20 mm) – voir photo Poids : env. 3 T

Sąlyga: geras (naudotas), Drying oven for UV line Kjdpfx Afet Ag Uqe Iewt

Gamybos metai: 2003, Sąlyga: geras (naudotas), Travels: 560 x 410 x 510 mm, table: 900 x 410 mm, 30-tool magazine, spindle: 12,000 rpm, chip conveyor. Kwodoiwkhkjpfx Af Iot

Sąlyga: naujas, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 pcs. S&S electro-hydraulic frame press machine, type Super Options: Working widths from 3,000 mm up to 5,000 mm Working heights from 2,000 mm up to 3,000 mm Optional equipment such as center pressure beam, tilting sash device, counter profiles for single-part production, and much more! Please request our complete price list! Description: With automatic adjustment for mortise and tenon corner joints (other corner joints available as option), CE specification The only fully automatic, self-adjusting high-performance frame press in which pre-positioning of the timber components is not required. Width and height adjustments are made automatically, without any time loss, immediately after direct insertion of the workpieces into the pressing area. No repositioning of the timbers is necessary. Base machine features a heavy-duty welded frame construction using oversized, thick-walled special profiles. Guideways of the press corners on the pressure beams are designed for minimal wear. Continuous counter bearing on the stop side for width pressing, built in a torsion-resistant design, mounted to the machine base. Continuous lower counter bearing in extremely robust, torsion-resistant design, connected to both the base frame and the machine. Insertion height 500 mm. All counter bearings are finely adjustable for absolute angular precision and long-term accuracy. Sliding carriage on the right with rapid, motorized width adjustment, guaranteeing parallel travel, includes automatic hydraulic locking: Central drive for dimension adjustment both horizontally and vertically, with high adjustment and travel speed, and automatic width and height adjustment (opto-electronically controlled). 2 double-acting vertical pressure cylinders, piston diameter 50 mm, 250 mm stroke, adjustable pressure force from 400 to 2000 kg. 2 double-acting horizontal pressure cylinders, piston diameter 40 mm, 80 mm stroke, adjustable pressure force from 250 to 1250 kg. Upper right press corners, heavy-duty, machined design with automatic corner positioning. Floating press corners Contact surfaces with adhesive-repellent finish. Counterbearing and pressure plate depth 100 mm. Kwedpfxed Rzc Ro Af Ijt 8-way holding and positioning device for completely loose insertion of all single timber pieces into the press area (no pre-arranging or pre-positioning required). Each frame element is held and positioned twice. Automatic lifting function allows for ergonomic insertion of the upper transverse timber on tall frames at a user-friendly height. Increases work safety by enabling floor-level operation—no ladders or steps required. All frame members are placed directly into the pressing area. Program selection options: Manual, motor-driven via pushbutton, Fully automatic via optoelectronic measurement, including automatic pressing cycle combined with safety light barrier. Automatic, cycle-controlled pressing sequence via pulse input: Vertical pressing – release – horizontal pressing – release – vertical/horizontal pressing. Control cabinet mounted on the left side of the base frame for easy servicing. Fast, optoelectronic dimension adjustment. Compact hydraulic unit, adjustable from 20 to 100 bar. Freely programmable electric manual control for efficient operation, especially with large or complex frame assemblies (...

Sąlyga: naujas, MEP SHARK 230-1 NC HS 5.0 Double-Column Metal Band Saw Article Number: SH230-1NCHS Motor Power: 2.2 kW Vice Opening: 235 mm Blade Dimensions: 2950x27x0.9 mm Weight: 1,000 kg Kjdpfxjchhfue Af Iswt Cutting Speed: 15 - 100 m/min (stepless) Cutting Capacity 0°: 230 / 230x230 mm Cutting Capacity 45° right: Cutting Capacity 45° left: Cutting Capacity 60° right: Cutting Capacity 60° left: Description: SHARK 230-1 NC 5.0, electro-hydraulic double-column fully automatic band saw with both semi-automatic and fully automatic operating modes. Max. remnant length: 70 mm. Bundle cutting: 230 x 230 mm. Numerically controlled band saw with the new MEP 50 – Windows-based control system. Material feed via stepper motor and ball screw, mounted on opposing ball bearings. Single stroke: 500 mm, repeatable to saw any length. Simple programming – enter cutting length and quantity, then press "START". Electronic blade tension control. Automatic cutting load monitoring through a servo valve mounted directly on the cylinder. Rotation control of the blade with instant stop in the event of a jammed saw blade.

Sąlyga: naujas, Gamybos metai: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure your workpieces are optimally prepared for edge banding. The standard configuration includes a jointing unit (up to 2 mm milling depth), top-mounted quick-heating glue pot, end trim saw, and combination milling unit. Optionally, the F 2 can also be fitted with a flat scraper. Kwsdpfxolht Hzo Af Iot Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Features: F2 - 10 m/min F2 Next Edgebander With PLC control (including touchscreen) and automatic glue application on the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change setup and glue discharge unit, high-frequency end trimming station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic height adjustment and interchangeable insert router (combination version), robust chain feed, ball-bearing double roller top pressure, inspection window at the back of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 Chassis F2/30 Pneumatic 3-point adjustment (radius, chamfer, flush trimming)