Paleisti spaudą

Obel-P T 20 V

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SK-K-24001, 1 optimized cross-cutting line with scanner Manufacturer: Dimter Model: OptiCut 450 Year of manufacture: 2015 Item no.: SK-K-24001 DIMTER cross-cutting system Bedpfxewya Sye Admslr with 1 x OptiCut 450 and feeding system F 100 featuring LuxScan CombiScan+ C 200 with curvature measurement The system was operational until 2024, has been professionally dismantled, and can be inspected in this condition.

Sąlyga: naudotas, Gamybos metai: 2007, No. 3177 Grecon Dimter OptiCut 200-1 Optimizing Cross-Cut System Used, year of manufacture: 2007 For cutting fixed lengths Wood dimensions to be processed: - Infeed lengths min./max. 3000 - 5000 mm - Infeed widths min./max. 80 - 200 mm - Infeed thicknesses min./max. 38 - 80 mm - Maximum wood cross-section: 200 x 50 mm - Final wood length min./max. 700 - 1000 mm - Average number of cuts per board: 5 Blsdpfou Atmuox Admor - Types of wood: softwood or hardwood Machine performance: - Max. feed speed: 180 m/min, infinitely variable - Time per cutting operation incl. braking: 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt, positioned before the saw - Length: 1.5 m, coupled with saw feed motor Pos. 2: Automatic cross-cut saw OptiCut 200-1, left-hand version - Equipped with integrated length measuring wheel and built-in waste air blast mechanism - Graphic input terminal, 1/4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control - The machine is loaded from the left Pos. 3: Outfeed conveyor / sorting station - With drive unit, without ejector - Belt length approx. 1.5 m Machine already dismantled and stored - The infeed table was not used by the previous owner. Two feed rollers were mounted for material infeed. The feed table is available, only the rubber belt is missing. For sale on behalf of customer, ex-site Austria, without transport and assembly - Errors in description and price are reserved - Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as-is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure and previous owner, without guarantee - Subject to prior sale - For used machines, any guarantee/liability is excluded; 'sold as inspected' applies - Photos and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Gamybos metai: 2009, veikimo valandos: 214 h, Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Thin-cut frame saw DSG Sonic – Wintersteiger AG Model / Type: DSG Sonic Year of manufacture: 2009 Technical condition: EXCELLENT, only 214 operating hours Technical data: DSG Sonic – technical data (Wintersteiger) 🔹 Cutting and block parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Number of frame strokes: approx. 550/min Cutting heights for different saw lengths: Saw length 380 mm → cutting height: 30–88 mm (with Air Jet and magazine), 45–88 mm (with double planer) Saw length 420 mm → cutting height: 30–128 mm, 45–128 mm Saw length 500 mm → cutting height: 80–210 mm, 45–210 mm Saw length 550 mm → cutting height: 80–254 mm, 45–254 mm Block lengths: For standard machine: +185 mm With magazine: 250–1700 mm With double planer: +250 mm Block height difference: ±0.5 mm Cutting width for side fence: 140 mm 🔹 Additional technical data: Bedpfx Adow Dp Ufomjlr Cutting width for central fence: 2 × up to 60 mm Optional groove width: 2–4 × 15–60 mm Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm Material loss per cut (kerf thickness): from 0.9 mm Saw blade service life (depending on wood): ~40 hours Machine weight: - Basic: 3000 kg 🔉 Noise levels (hearing protection required): At the machine (1 m): - Idle: 97 dB(A) - Cutting: 99 dB(A) At the operator’s workstation: - Idle: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and air system: Extraction: - Two connections: Ø 120 mm and Ø 150 mm - Capacity: 3200 m³/h (30 m/s) Working air: - Min. 6 bar - Consumption: 200 l/min Lubrication: Central, with guide monitoring ⚡ Electrical data: - Power supply: L1, L2, L3 + PE - Supply cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Sąlyga: naudotas, A.COSTA LEOPARD Multiblatt-Auftrennsäge mit Doppelwelle - Maximale Schnitttiefe: 200 mm - Breite des Förderbands: 350 mm Bljdpjvf Dagofx Admsr - 2 x 55 kW / 75 PS - Gewicht: ca. 5 Tonnen

Gamybos metai: 2000, Sąlyga: labai geros būklės (naudotas), Please contact me for further information. Bjdpfx Aok Nn Ilsdmjlr

Sąlyga: geras (naudotas), Obel Pedersen high-frequency through-feed belt press, Opel-Pedersen press type 2412. Pressing length 2,500 mm, width 600 mm. Comes with gluing station, feed table, HF generator T20 V, and water cooling. The system has been dismantled. Bledpsdybr Rofx Admer

Sąlyga: naudotas, Gamybos metai: 2001, Wood dimensions to be processed: Incoming lengths min/max: 500 – 6500 mm; Full optimization up to max. 1500 mm. Incoming widths min/max: 40 – 300 mm. Incoming thicknesses min/max: 15 – 120 mm. Maximum wood cross-sections: 300 x 40 mm, max. 200 x 120 mm. Fixed lengths after saw: min. 510 – 2800 mm. Special application: Cutting of blocks, length min/max: 100 – 200 mm (Note: multiple block length during sorting, blocks are transported to the end of the sorting line and drop into customer-side mesh boxes). Cut/trimming tolerance: +/- 0.8 – 1.5 mm (for wood with minimum resin content and even surface. Tolerance up to 1 m fixed length, max. tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm. Curvature of wood in all directions: max. 10 mm per meter length. Types of wood: Softwood or hardwood. Machine performance: Feed speed continuously adjustable up to max. 230 m/min; cutting cycle 0.6 – 1 s. To determine the practical daily output, an effectiveness factor dependent on the customer’s production conditions must be considered. Infeed and saw working height: 900 mm (install required on customer-side platform, saw requires concrete base). Sorting working height: 2000 mm. Connection values: Total electrical connection load approx. 18 kW. Operating voltage: 380 Volt / 50 Hz. Voltage fluctuations max. 5 %. Air consumption approx. 1200 NL/min. Operating pressure approx. 8 bar. Extraction velocity approx. 30 m/s. Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B. POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge. Pos. 2: Support roller without drive, at the end before steel table for easier feeding. Pos. 3: Length measuring station with built-in fluorescence camera for detecting defect markings. Pos. 4: Automatic non-contact width measurement. Bledew Sy T Hopfx Admor Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with built-in waste chute incl. equipment package for large wood cross-sections. Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control. The following are available for processing: - max. 16 product groups - max. 8 qualities per product group - max. 200 fixed lengths per product group. Pos. 6: Discharge conveyor belt as sorting station with drive unit, length 7500 mm. Pos. 7: 2 ejectors mounted on discharge conveyor belt. Location: Nattheim

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1981, WEINIG Hydromat H25R, S/N 2603-624, year 1981 with walk-in sound insulation cabin KASCHWIG – ALMOST NEW from year 2017 • Short infeed table with heavy-duty 6-roller infeed 1st spindle bottom 11.0 kW 2nd spindle right 11.0 kW 3rd spindle left 11.0 kW 4th spindle top 15.0 kW 5th spindle bottom 11.0 kW 6th spindle bottom 11.0 kW • Hydraulic feed, 6–60 m/min • Feed motor 22.0 kW • 4 driven table rollers • Spindle diameter 50 mm • Automatic table lubrication Bedpfxjtkt Tpe Admelr • Spindles 1 + 4 + 5 + 6 with counter bearing • Spindles 1 + 4 with straight jointer • Feed rollers 170 mm • Approx. 10 hydro-planing cutterheads • Extraction hood above the machine

Sąlyga: visiškai atnaujintas (naudotas), spaudimo jėga: 10 t, darbinio aukščio: 805 mm, bendras ilgis: 1 700 mm, Pleištinių jungčių presas Pleištinių jungčių presas Bljdpfxjt Sc Swo Admsr Ciklinis pleištinių jungčių presas Presavimo jėga: 10 t Hidraulinis pleištinių jungčių ciklinis presas Medienos plotis: 80–280 mm Medienos storis: 18–80 mm PASIRINKTINAI su hidrauline pavara 300 ltr ir 5,5 kW varikliu, gamintojas GOD su elektros įranga

Sąlyga: naudotas, Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, Arbeitsbreite: 220 mm Arbeitshöhe: 140 mm Einzugsgeschwindigkeit: 6–60 m/min (Inverter-gesteuert) Einzugsmotor: 7,5 kW Spindeldurchmesser: 50 mm Bodpsq Dkknefx Admslr Ausstattung: - Hydraulische Zufuhrvorrichtung 1. Unten 7,5 kW 2. Rechts 7,5 kW 3. Links 7,5 kW 4. Rechts 7,5 kW 5. Oben 7,5 kW 6. Unten 7,5 kW 7. Oben 7,5 kW 8. Unten 7,5 kW 9. Rechts 15 kW (Mehrfachsägespindel) 10. Links 15 kW (Mehrfachsägespindel) Zentrale Waxilit-Schmierung Alle Werkzeuge auf der Maschine sind im Preis inbegriffen Viele zusätzliche Werkzeuge, Ringe und Köpfe im Preis enthalten Transportmaße: L 5600 x B 1800 mm Wir bieten eine Live-Videopräsentation der Maschine über WhatsApp an.