Medžiagų padėjimo stovas

Neydorff 10 0006

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, galia: 39,4 kW (53,57 AG), kuro tipas: dyzelinas, darbinė masė: 8 000 kg, Gamybos metai: 2010, veikimo valandos: 9 000 h, Įranga: griebtuvo hidraulika, guminės vikšrinės juostos, oro kondicionavimas, Hitachi ZX85 US-3 kompaktiškas ekskavatorius Dsdpfsxvrqdox Ab Ssul Pagaminimo metai: 2010 9000 val. 8000 kg 39,4 kW Isuzu variklis Hidraulinis greito keitimo įrenginys 3 kaušai Automatinis kondicionierius Kietųjų dalelių filtras

Sąlyga: naudotas, Gamybos metai: 2006, Bruks būgninis smulkintuvas, modelis 820CM, pagaminimo metai 2006. Djdpfjxr Trnex Ab Sjul

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, keliamoji galia vienai konsolės svirčiai: 810 kg, keliamoji galia: 3 900 kg, lentynos aukštis: 2 500 mm, bendras ilgis: 38 750 mm, ašių atstumas: 1 250 mm, tarpas tarp stulpų: 1 250 mm, apkrova vienai atramai: 3 900 kg, gerklės gylis: 800 mm, We hereby offer you, without obligation, 39 linear meters of used heavy-duty cantilever racking with a load capacity of 3,900 kg per upright. Manufacturer: SSI Schäfer GmbH Type: KR Year of manufacture: 2008 Load capacity per side of upright: 3,900 kg Support profile upright: IPE 180 Upright height: 2,500 mm Cantilever arm length: 800 mm Cantilever arm load: 810 kg Cantilever arm profile with deflector: INP 80 Composition: 34 uprights 68 cantilever arms 6 cross braces, axis dimension 1,250 mm 72 longitudinal braces, axis dimension 1,250 mm Cantilever racking system 1: 16 uprights, 15 bays, 34 cantilever arms, 30 longitudinal braces, 3 cross braces, axis dimension 1,250 mm = 17.5 linear meters Cantilever racking system 2: 18 uprights, 17 bays, 38 cantilever arms, 34 longitudinal braces, 3 cross braces, axis dimension 1,250 mm = 21.25 linear meters Condition: As you can see from the photos, the cantilever racking is in very good condition and will be disassembled and loaded onto pallets. The technical details mentioned above have been taken from the manufacturer’s brochures or other sources; therefore, we do not assume any liability for their accuracy or completeness. Sale takes place without warranty or guarantee. We would be pleased if this cantilever racking is of interest to you and look forward to your inquiry. Your Service Team Mertens & Frowein GmbH Dujdevt Um Hopfx Ab Sjl

Sąlyga: naudotas, Travel of axes: Duedpfxjq Awhfj Ab Sjl X: 300 mm Y: 350 mm Z: 200 mm Weight: approx. 800 kg

Sąlyga: naujas, Cantilever rack, single-sided, frame height 2.60 m, 80 cm deep arms, 750 kg per arm, hot-dip galvanized – New equipment: Price ex location incl. loading! Price: €1,480 (net) Transport/packaging costs within Germany (excluding islands): €400 (net)! You can, of course, build longer or shorter rack units by omitting or purchasing additional frames (or by varying the bay spacing); the example with 4 frames is simply the most common racking solution! A hot-dip galvanized cantilever racking system, consisting of: German premium manufacturer, new equipment Description: - Upright, single-sided, 2,600 mm high, hot-dip galvanized - Foot and arm depth 800 mm - Each with 3 height-adjustable cantilever arms - Load capacity with load center at 400 mm - 750 kg per arm / 2,250 kg per upright With 4 uprights per arm level: 4 x 750 kg = 3,000 kg Profiles: Uprights (frames) IPE 140, arms IPE 80 including longitudinal and diagonal bracing Standard bay spacing between uprights is 1.30 m. Other available bay spacings from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! For bay spacings from 1.50 m, a small surcharge applies to the given price! Special dimensions (other bay spacings) also available on request, but incur additional charges and longer delivery times, as they are custom fabricated! Unless you specify otherwise for bay spacing, we deliver the rack with a bay spacing of 1.30 m. In this case, the length for one rack row with 4 uprights (3 bays) is approx. 4 m. Delivered with all bolts and nuts (shipping within Germany via parcel service directly from Würth), without floor anchors. If additional arms per upright are used, please ensure that the maximum specified load capacity of the upright is not exceeded; otherwise, the maximum usable load per arm decreases! Other configurations (upright height, arm lengths, arm types, etc.) are available – please contact us! Available special equipment (at extra cost), see photos attached: - Foot section with impact protection - Foot section with large impact protection - Foot section with tyre guard - Cantilever arm with impact protection - Cantilever arm with plug-in roll-off protection - Clamp-on roll-off protection - Grating decks Dedpfxenwmwvs Ab Soul - Conversion kit for storing pallets Photos are examples of single-sided racks and/or the materials used!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, bendras plotis: 80 mm, bendras ilgis: 1 600 mm, laisvas tarpatramis: 30 mm, Konsolinės stelažai – Idealiausias sprendimas ilgiems ir sunkiems kroviniams sandėliuoti Konsolinės stelažai yra specialiai sukurti efektyviam didelių ir sunkių gaminių, tokių kaip vamzdžiai, mediena, metalo profiliai, nestandartinės paletės ir kitų netaisyklingų formų medžiagų sandėliavimui. Pagrindinės savybės: • Tvirta konstrukcija • Reguliuojamos sijos maksimaliam sandėliavimo lankstumui • Patogus priėjimas ir optimali prekių organizacija • Tinka sunkiems kroviniams ir didelės apimties produktams • Modulinė konstrukcija, lengvai praplečiama pagal sandėlio poreikius Privalumai: • Maksimaliai išnaudoja horizontalią sandėliavimo erdvę • Sumažina krovinių tvarkymo laiką • Pagerina saugumą ir sandėliavimo efektyvumą Dusdsw S Ttyepfx Ab Sjl Idealiai tinka pramoniniams sandėliams, dirbtuvėms, gamykloms ir logistikos centrams. Kaina priklauso nuo modelio ir dydžio!

Sąlyga: labai geros būklės (naudotas), keliamoji galia vienai konsolės svirčiai: 330 kg, lentynos aukštis: 2 500 mm, ašių atstumas: 1 250 mm, lentyna ilgis: 5 200 mm, Cantilever Rack H 2500 mm Dedewzzrqspfx Ab Seul Manufacturer: BITO Length: approx. 5.2 meters Height: 2500 mm Load capacity per arm: 330 kg Cantilever arm length: 600 mm Frame spacing: approx. 1250 mm Total rack depth: 1340 mm The cantilever rack consists of: * 5 uprights with base, made from IPE 140 profiles, upright height 2500 mm * 35 cantilever arms, length 600 mm, load capacity per arm 330 kg * Diagonal bracing, bolts, connectors Total weight: approx. 500 kg Price: 1,000 euros net 2 sets available

Sąlyga: naudotas, Support stand, assembly stand, steel trestle, welding table, assembly table, work stand, screw jack stand -Support stand: Steel trestle with screw spindle -Adjustable height: 620 - 980 mm -Quantity: 1 piece available Djdpfjh E Uhgjx Ab Sjul -Dimensions: 510/460/H620 mm -Weight: 31 kg