Konsolinis stelažas, 2,60 m H, 80 cm rankenos, 750 kg/

Bruckkamp Kragarmregal

Cantilever rack, single-sided, frame height 2.60 m, 80 cm deep arms, 750 kg per arm, hot-dip galvanized – New equipment:

Price ex location incl. loading!

Price: €1,480 (net)

Transport/packaging costs within Germany (excluding islands): €400 (net)!

You can, of course, build longer or shorter rack units by omitting or purchasing additional frames (or by varying the bay spacing); the example with 4 frames is simply the most common racking solution!

A hot-dip galvanized cantilever racking system, consisting of:

German premium manufacturer, new equipment
Description:
Ppodpfx Apsnwmwvjyjr
- Upright, single-sided, 2,600 mm high, hot-dip galvanized
- Foot and arm depth 800 mm
- Each with 3 height-adjustable cantilever arms
- Load capacity with load center at 400 mm
- 750 kg per arm / 2,250 kg per upright
With 4 uprights per arm level: 4 x 750 kg = 3,000 kg
Profiles: Uprights (frames) IPE 140, arms IPE 80
including longitudinal and diagonal bracing
Standard bay spacing between uprights is 1.30 m.
Other available bay spacings from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m!
For bay spacings from 1.50 m, a small surcharge applies to the given price!
Special dimensions (other bay spacings) also available on request, but incur additional charges and longer delivery times, as they are custom fabricated!
Unless you specify otherwise for bay spacing, we deliver the rack with a bay spacing of 1.30 m.
In this case, the length for one rack row with 4 uprights (3 bays) is approx. 4 m.
Delivered with all bolts and nuts (shipping within Germany via parcel service directly from Würth), without floor anchors.

If additional arms per upright are used, please ensure that the maximum specified load capacity of the upright is not exceeded; otherwise, the maximum usable load per arm decreases!

Other configurations (upright height, arm lengths, arm types, etc.) are available – please contact us!

Available special equipment (at extra cost), see photos attached:
- Foot section with impact protection
- Foot section with large impact protection
- Foot section with tyre guard
- Cantilever arm with impact protection
- Cantilever arm with plug-in roll-off protection
- Clamp-on roll-off protection
- Grating decks
- Conversion kit for storing pallets

Photos are examples of single-sided racks and/or the materials used!

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.