Inkubatoriaus kratytuvas

New Brunswick Innova 4300

Sąlyga: labai geros būklės (naudotas), a truly unique item, approx. 12 x 6 m Bsdpfefi Tmcsx Admelr

Sąlyga: naujas, *TECHNICAL SPECIFICATIONS: Heating capacity (hot circuit): 48 kW Heating capacity (cold circuit): 12 kW Cooling capacity (hot circuit): 42 kW Cooling capacity (cold circuit): 270 kW Medium: Water up to 200°C Maximum external volume: 10 l at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions (LxWxH): 1,395 x 753 x 1,180 mm Weight: approx. 580 kg *FEATURE HIGHLIGHTS: - PLC control system with touch screen - Heating via Incolloy stainless steel tubular heaters - Heating control via solid-state relays - IP54 switch cabinet with forced ventilation - Electrical wiring with terminal blocks Bsdpfx Adog Ey Ufomolr - Volt-free input for cold/warm switching signal (front door) - Volt-free contact for collective alarm via 3-pole connector (front door) - Temperature control unit with heating and cooling circuits for connection to a valve station, enabling rapid switching between hot and cold circuits - Temperature-controlled supply of return water - Level monitoring with automatic level compensation - Dirt filters in cooling water inlet and circulation system return - Separate automatic filling with dirt strainer - Flow measurement via differential pressure principle in both circuits - Monitoring of heater surface temperature via temperature sensors - System pressure regulation, required compressed air supply: 6 to 8 bar - Pressure booster pump type DS 360 for make-up water supply - Corrosion-resistant components (stainless steel, brass) - Unit mounted on castors and ready for connection *OPTIONS: - EcoTemp system for intermittent operation - Connection for external temperature probe PT100 or type J/K - Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This unit complies with European Directives. Other directives and standards are only met if specified in the order confirmation. This technical specification describes the standard equipment; customer requests deviating from the standard are specified in offers or order confirmations.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, veikimo valandos: 8 800 h, lazerio galia: 2 000 W, ONLY approx. 8,700 operating hours – immediately available Bjdevylnzjpfx Admolr Used fiber tube laser cutting machine with automatic loading and unloading system Manufacturer: DURMA Model: TC HD-60170 Year of manufacture: 2017 (commissioned June 2019) Control unit: Siemens Sinumerik 840 D SL Operating hours: ONLY approx. 8,700 h Possible profile cutting types: round, square, rectangular TECHNICAL DATA: Max. tube diameter: 170 mm Max. square profile dimension: 120 x 120 mm Max. rectangular profile dimension: 150 x 100 mm Min. tube diameter: 20 mm Max. material length: 6,500 mm Min. material length for automatic loading: 3,000 mm Material length for last cut: 185 mm Unloading length: 6,000 mm Max. material weight: 37.5 kg/m Max. total workpiece weight: 210 kg Max. bundle weight: 3,000 kg X-axis: 90 m/min Y-axis: 50 m/min Z-axis: 45 m/min A-axis: 1200 °/s Max. cutting thickness: - Mild steel: 8 mm - Stainless steel: 4 mm - Aluminum: 6 mm - Copper: 2 mm - Brass: 4 mm Laser power: 2,000 watts Laser source: IPG Fiber Required space: 16,000 x 7,400 mm Machine weight: 20,000 kg EQUIPMENT: - Precitec cutting head (Light Cutter) - Vanterm compact filtration unit - Automatic weld seam detection - Automatic real-time measurement system for centering chuck AUTOMATION: - Automatic loading system (6,500 mm) - Unloading unit (6,000 mm) - Discharge conveyor including small parts conveyor to the rear SAFETY: - Light barriers For detailed information and machine layout, please refer to the documents available for download. Subject to prior sale. Sale without any warranties and subject to our terms and conditions. All information is provided without guarantee.

Sąlyga: naujas, Gamybos metai: 2025, The DURMA AD-S 611600 is a high-performance hydraulic press brake that guarantees maximum precision and efficiency in sheet metal processing. With a press force of 1,600 tonnes and a working length of 6 metres, it is ideally suited for demanding applications, particularly when working with large and thick materials. Technical Details: - Model: DURMA AD-S 611600 - Press force: 1,600 tonnes - Working length: 6 metres - Condition: As new, immediately available Features and Benefits: - High bending accuracy thanks to state-of-the-art CNC control - Robust construction for extended service life - Flexibility through programmable backgauge control - Assisted bending function for handling heavy and oversized sheets Blodpjvy Srajfx Admor The machine is immediately available and can be inspected upon request. For further information or to schedule a viewing appointment, please do not hesitate to contact us.

Sąlyga: nepatikrintas (naudotas), Stainless steel screw conveyor with scale. Maximum height: 2400 mm Hopper: 980 x 980 x 700 mm Blodpfjhn S Efjx Admor Screw tube diameter: 150 mm

Sąlyga: naujas, *TECHNICAL SPECIFICATIONS: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW Medium: Water up to 200°C Maximum external volume: 43 l at 200°C Max. flow rate: up to 230 l/min Max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions LxWxH: 1,460 x 525 x 1,200 mm Weight: approx. 330 kg Circulating medium connection: Flange DN40 (DIN EN 1092-1), Form B1 *EQUIPMENT HIGHLIGHTS: Bsdpsg Ey T Eofx Admjlr -Control and regulation unit: Smart Controller (7" touch display) -Heating control via solid-state relay -Control cabinet IP54, externally ventilated -Expansion tank, heater, and piping made of stainless steel -Heating via stainless steel tubular heaters made of Incolloy -Strainer (circulation) -Unit ready for connection and mounted on casters, 2 of which are steerable and with brake -Cooling and filling controlled by solenoid valve -Configurable automatic filling via cold water supply or separate connection (factory setting: via cooling water supply) -Flow measurement based on the differential pressure principle -Level monitoring using magnetic float switch -Automatic temperature-dependent system shut-off (not for WP7-90) -Flow monitoring by detecting the flow rate -Bypass between supply and return with reduced cross-section -Dirt filter in cooling water supply, filling, and return of the circulation system -Continuous bypass of the heat exchanger via 3-way motorized control valve (WP7-180/200) -System pressure monitoring via pressure transmitter in expansion tank (WP7-150/180/200) -Booster pump for system filling (WP7-180/200, optional for other models) -Safety temperature limiter (STB) in heater and supply (WP7-200) -Pressure gauge in supply line at rear of unit -Circulation circuit thermally insulated (WP7-150/180/200) Visit our website for further details or for other performance classes. *This equipment complies with European Directives. Other directives and standards are fulfilled only if listed in the order confirmation. This technical specification refers to the standard configuration; customer requests deviating from the standard will be specified in quotations and order confirmations.

Sąlyga: paruoštas naudoti (naudotas), Separator mounted on a stainless steel frame, equipped with a feed pump, discharge pump, sludge pump, circulation tank, stainless steel piping and valve, fully wired with control cabinet. Suitable for cleaning contaminated water. Separation into large water phase, small light phase, and sludge phase. Not a self-discharging machine! Must be opened for cleaning. Cleaning time: approx. 5 minutes. Immediately operational. Bsdpfxeqzxzge Admolr For further questions, feel free to contact us via email!

Sąlyga: naujas, Gamybos metai: 2021, Wir verkaufen 6 Stück neue pneumatische Dosiergeräte aus elektropoliertem Edelstahl (Inox), Volumen 18 kg, hergestellt in Italien von GMC, Modell 402E, komplett einsatzbereit mit folgendem Zubehör: - 1 manuelle Hochdruck-Spritzpistole mit einstellbarem Durchfluss, Marke Wagner Air, Modell Colora SP5, 0,8 mm - 1 Universaldüse - 1 Manometer - 1 Schlauch, 4 Meter lang 4 Geräte sind mit Hochdruck-Spritzpistole ausgestattet 2 Geräte sind ohne Hochdruck-Spritzpistole Bledpfxotu Enqj Admjr Preis für das System mit Hochdruck-Spritzpistole: 750 Euro Preis für das System ohne Hochdruck-Spritzpistole: 650 Euro Paketpreis für alle 6 Einheiten: 3.600 Euro Preis: 750 Euro zzgl. MwSt., verhandelbar, FCA und verpackt Oradea, Rumänien Bitte machen Sie ein Angebot. Irrtum, Änderungen und Zwischenverkauf vorbehalten.

Sąlyga: naudotas, Dieses Angebot bezieht sich auf das Mettler Toledo Seven Excellence Multiparameter-Messgerät. Das Gerät befindet sich in einwandfreiem, voll funktionsfähigem Zustand und ist sofort einsatzbereit. Die METTLER TOLEDO SevenExcellence-Serie umfasst eine Reihe fortschrittlicher Tischmessgeräte für hochpräzise elektrochemische Messungen. Diese Messgeräte eignen sich ideal für Anwendungen in der Pharmaindustrie, der Qualitätskontrolle von Lebensmitteln und Getränken sowie der Umweltanalytik. Wichtige Merkmale der Serie: Blsdpexhgdpsfx Admer Messfunktionen: Die Modelle unterstützen Messungen von pH-Wert, Leitfähigkeit, Widerstand, Redox/ORP, TDS, Salzgehalt, ISFET, ionenselektiven Elektroden (ISE) und gelöstem Sauerstoff (DO). Benutzeroberfläche & Workflow-Optimierung: - Großes Touchscreen-Display für intuitive und effiziente Navigation - Klar strukturierte, verständliche Menüs für eine einfache und fehlerfreie Inbetriebnahme - Ein-Klick-Betrieb startet eine von 17 vordefinierten oder 60 individuell anpassbaren Methoden und erhöht somit den Probendurchsatz - Auswahl zwischen uFocus™-Ansicht, die nur die wichtigsten Informationen anzeigt, oder Standardansicht mit detaillierten Daten, inklusive Setup und Messungen Datenmanagement: - Export der Ergebnisse an Drucker, Excel oder LIMS - Kompatibel mit LabX-Software für 21 CFR Part 11-Konformität und fortgeschrittene Datenverwaltung - Zeit- und Datumsstempel von einer funkgesteuerten Uhr garantieren die Einhaltung von GLP-Richtlinien Sicherheit & Compliance: - Einstellungen zum Benutzer-Management sowie PIN-Schutz verhindern unbefugte Änderungen an den Methoden - ISM®-pH-Elektroden werden automatisch erkannt und speichern eigene Kalibrierdaten – höchste Messgenauigkeit auch beim Elektrodenwechsel Modulares und ergonomisches Design: - Bedienarm ermöglicht komfortables Arbeiten mit einer Hand und präzise, vertikale Bewegungen zur Reduktion von Verschüttungen und Zeiteinsparung - Modulare Bauweise erlaubt einfache Erweiterung und Anpassung an zukünftige Laboranforderungen - Anschlussmöglichkeiten: USB, Ethernet und RS-232 für die Integration in PCs und Peripheriegeräte