Zimmer Galva 4 pirkti naudotą (63 196)

Sąlyga: paruoštas naudoti (naudotas), Guilliet KXR III su mobiliuoju velenu, skirtu keičiamiems pločiams + Stalių paketas, galutiniai matmenys 240x160mm + Pateikimas prieš obliavimą + Sustiprinti varikliai Velenu skaičius: 4 vnt., 40 mm skersmens Įrankio profilinio apdirbimo skersmuo kairė/dešinė maks.: 180 mm Vertikalus veleno reguliavimas: 40 mm Galutinis plotis: 240 mm Galutinis aukštis: 160 mm Obliavimo stalo ilgis: 2500 mm Padavimo greitis: bepakopis, 4,5-27 m/min. Sustiprinta variklio galia: Obliavimas: 7,5 kW Kairys/dešinys velenas: 11 kW, 1 variklis Storis: 9 kW Cpsdovq Rnhspfx Af Tou Padavimas: 2,2 kW Išmatavimai apytiksliai (ilgis/plotis/aukštis): 3160 x 1420 x 1440 mm Mašinos svoris apytiksliai: 1700 kg Iš vietos, kaip stovi Papildomai galimas apžiūrėjimas ir paruošimas už papildomą mokestį

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 20369, stalo plotis: 400 mm, stalo ilgis: 570 mm, valdiklio modelis: POCON 60, tuščias svoris: 6 000 kg, Nėra minimalaus kainos – garantuotas pardavimas už aukščiausią pasiūlytą kainą! Apmokėjimo terminas už įrenginį – 2025-11-20! Pateikus pasiūlymą, privaloma laikytis atsiėmimo termino nuo 2025-12-01 iki 2025-12-05! Cpodpsxm Sf Njfx Af Tsu TECHNINIAI DUOMENYS Stalo plotis: 400 mm Stalo ilgis: 570 mm Magneto matmenys: 260 x 150 mm Valdymas: POCON 60 ĮRANGOS DUOMENYS Maitinimo įtampa: 400 V Dažnis: 50 Hz Galia: 5 kVA Matmenys & Svoris Matmenys: 3.500 x 3.000 x 2.600 mm Svoris: 6.000 kg ĮRANGA 4 grioveliai Tvirtinimo sistema Magnetinė tvirtinimo plokštė ZIMMER + KREIM elektrodų keitimo sistema Elektrodų laikiklis 50 padėčių elektrodų keitiklis Sandėliavimo sistema su įvairiomis tvirtinimo plokštėmis 2 įrankių vežimėliai su tinkamais elektrodais ir tvirtinimo sistemomis

Sąlyga: naudotas, Diameter various Cpedpfx Aoww Nbljf Tsu Quantity 40x Holder BT 40

Sąlyga: naudotas, Gamybos metai: 2001, veikimo valandos: 35 973 h, Funkcionalumas: ribota funkcionalumas, mašinos/transporto priemonės numeris: 5.3049, X ašies eiga: 825 mm, Y ašies eiga: 680 mm, Z ašies eigos atstumas: 405 mm, ruošinio svoris (maks.): 2 500 kg, bendras aukštis: 2 760 mm, bendras plotis: 1 500 mm, bendras ilgis: 2 200 mm, stalo plotis: 850 mm, stalo ilgis: 1 200 mm, ruošinio ilgis (maks.): 1 150 mm, ruošinio plotis (maks.): 800 mm, valdymo spintos ilgis: 600 mm, valdymo spintos plotis: 920 mm, valdymo spintos aukštis: 1 960 mm, įėjimo įtampa: 380 V, bendras svoris: 4 500 kg, bakelio talpa: 900 l, Įranga: dokumentacija / vadovas, Zimmer & Kreim ZK 1200 – Die Sinker EDM Machine (used, dismantled) For sale is a used sinker EDM machine Zimmer & Kreim ZK 1200. The machine was fully operational until its dismantling and is currently stored in a dismantled state. The included electrode changer is defective. Also included in the scope of delivery are a Kraft & Bauer CO₂ fire suppression system and a chiller. Technical data Machine: Dimensions (H x W x D): 2760 x 1500 x 2200 mm Weight: 4500 kg (without dielectric) Worktable: Table size: 1200 x 850 mm Dielectric above table: 410 mm Max. workpiece weight: 3000 kg T-slots: 4 x 12 mm Distance table–ram (max./min.): 650 / 235 mm Machining head: Travel (X/Y/Z): 900 / 680 / 415 mm Resolution X–Y–Z: 0.001 mm Resolution C: 0.001° Rapid traverse speed: 2000 mm/min Electrode weight without rotation: 100 kg Electrode weight with rotation: 15 kg Dielectric supply: Capacity: 800 liters Paper cartridge filters: 4 pcs Generator (rollable): Dimensions (H x W x D): 1960 x 600 x 920 mm Weight: 300 kg Rated current: 60 Amp Connected load: 15 kVA Codpfxexrcpce Af Tjpu Also included: CO₂ fire suppression system by Kraft & Bauer Chiller Condition Used, well-maintained Machine is dismantled Electrode changer defective Machine was running until dismantling Machine must be loaded and collected in 49393 Lohne.

Sąlyga: naujas, Cutting capacity at 90 degrees: round 240 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangle 165 x 310 mm Saw blade length: 2,725 x 27 x 0.9 mm Table height: 940 mm Blade speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight: approx. 0.4 t Cpedpfxefgyh He Af Teu The Z252/DGH is equipped with the following features: - Hydraulic semi-automatic operation - Double mitre 60° left / 45° right - Emulsion pump - Base frame - Saw blade - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Sąlyga: naujas, Cutting capacity at 90 degrees: round 240 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 165 x 310 mm Saw blade length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight: approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Coolant pump - Eccentric vice - Base frame - Saw blade - 400V plug (16A) Codpfx Afjhpktvs Tepu The machine is delivered fully assembled and ready for immediate operation.

Sąlyga: naujas, Cutting diameter: 185 mm Saw blade length: 2,085 x 20 x 0.90 mm Table height: 915 mm Blade speed: 35/70 m/min Cutting capacity at 90° (round): 185 mm Cutting capacity at 90° (square): 150 mm Cutting capacity at 90° (flat): 220 x 150 mm Connection voltage: 400 V Total power requirement: 0.8 kW Machine weight: approx. 195 kg Space requirement: approx. 550 x 1,280 x 1,740 mm Cpodohpktrspfx Af Tju Metal band saw with stepless electronic speed control and automatic lowering. • Selector switch for hydraulically controlled or manual lowering of the saw arm • Saw arm swivels up to 60° to the right • Quick-release vice • Blade guide with 8 ball bearings • Hydraulic saw blade tensioning with tension indicator and blade breakage shutoff • Includes coolant system • Includes machine base

Sąlyga: naudotas, Gamybos metai: 2016, Used Machine Cross-grain sanding machine Year of manufacture: 2016 Product Advantages Beneath every perfectly painted, stained, or oiled wooden surface lies an impeccably sanded substrate! Felder sanding machines are characterized by robust construction, state-of-the-art technology, and maximum productivity. Key Highlights at a Glance: - Sanding width: 1350 mm - Sanding thickness: 3–170 mm - Combined superfinish unit - Touch-screen control for all operations - The Felder operating concept ensures maximum process and operational safety Your advantages at a glance: Time Savings - Motorized adjustment of the contact roller to 0.01 mm from the control panel - Innovative unit arrangement for pre- and fine sanding of veneered workpieces - Brush units at machine outfeed - Lacquer sanding as an optional feature Convenience - Fixed infeed table height (machine head adjusts) - Touch screen control with clear image display and program memory - Machine data logger for sanding belt wear and more - Tool-free sanding belt changes - Large, foldable table extensions for heavy workpieces Flexibility - Units for calibration, fine sanding, or lacquer sanding - Variable feed speed up to 20 m/min via inverter Innovation - Electronically segmented sanding shoe with silicone technology for minimal air consumption - Combined superfinish unit including chevron glide belt to eliminate oscillation marks Quality - Heavy-duty machine construction - Durable machine components Standard Equipment - Finish 1350 Classic control - Control unit with 7” color touchscreen, 100 program memory slots, maintenance interval reminders - Alphanumeric error messages - Ammeter for load monitoring Feed Table - Fixed infeed height, stationary table at 900 mm - Electric height adjustment of units, fine-tuning from the control panel - Infinitely variable feed speed 2.8–20 m/min adjustable by inverter from the control panel - Hand protection and over-thickness workpiece safety device - Workpiece detection sensor with 25 sensors, 55 mm segment width - Endless treadmill-style feed belt with honeycomb structure - Automatic feed belt centering Cross-sanding unit Finish 1350C High Gloss - Segmented, electronically pneumatic sanding shoe (ESC), segment width 25 mm, including quick-change system Cpedjw I Uv Uopfx Af Tsu - Chevron glide belt between sanding pads for uniform finishes without oscillation marks - Variable pressure adjustment on operator side - Electro-pneumatic sanding belt oscillation - Electronic belt tracking safety device - 1 Motor with 7.5 kW (10 HP) - Star-delta start-up - Cleaning blower with timer control - Cutting speed 12 m/sec - Sanding belt size: 140 x 4560 mm Combined Superfinish Unit 1350C: - Rubberized, grooved contact roller with 85–90° shore hardness and 142 mm diameter - Electromechanical position-controlled grit compensation - Segmented, electro-pneumatic sanding shoe ESC, segment width 25 mm, including quick-change system - Variable pressure adjustment on operator side - Chevron glide belt between sanding pads and sanding belt for uniform finishes without oscillation marks - Mechanically preloaded rubber pressure rollers - Electro-pneumatic sanding belt oscillation - Electronic belt tracking safety device

Gamybos metai: 2019, Sąlyga: paruoštas naudoti (naudotas), A complete erosion workstation consisting of two die-sinking EDM machines and an automation unit is available. 1) Zimmer & Kreim ZK Genius 700, year of manufacture: 2015, travel range X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator power: 96A, path-controlled erosion: CIMCO, operating hours: 22,056h. 2) Zimmer & Kreim ZK Genius 700, year of manufacture: 2019, travel range X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator power: 96A, path-controlled erosion: CIMCO, operating hours: 8,255h. 3) Automation: Zimmer & Kreim Chameleon Quad, year of manufacture: 2015, electrode positions: 176, pallet positions with loading drawer: 9, dual rotary gripper for Erowa ITS and single gripper for UPC pallets. Total system dimensions X/Y: approx. 3,000mm/6,200mm. Includes a Kraft & Bauer fire extinguishing system with extraction unit. Documentation available. On-site inspection possible. Csdpfx Ajwdwztef Tspu

Sąlyga: geras (naudotas), 4 x Bonfiglioli wind turbine gearboxes JB00001227 SN B6201603697 Cedpfswg E Utox Af Tspu

Sąlyga: naudotas, Gamybos metai: 2000, Sinker EDM Machines / EDM Travel X: 825 mm Travel Y: 680 mm Cedpfx Aevtfn Usf Topu Travel Z: 405 mm Table size X: 1200 mm Table size Y: 850 mm Max. workpiece weight: 3000 kg Electrode changer: 50 positions Generator: POCON 60 Quill interface: EROWA Heavy-duty adapter O-Module Halogen lamp

Sąlyga: naudotas, Gamybos metai: 2002, Die sinking EDM machines / EDM Travel X: 350 mm Travel Y: 250 mm Travel Z: 315 mm Cpsdpfxevtfn Ij Af Teu Table size X: 576 mm Table size Y: 400 mm Max. workpiece weight: 500 kg C-axis Quill interface: EROWA

Sąlyga: labai geros būklės (naudotas), Miwe Condo 120x80 bakkerijkamer met volledig onderhoud Cpsdpfx Afoh Rwf Sj Tsu

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolt system in hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions can be reordered at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE sections (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with pre-delivery notification. The material is packed for easy unloading. For outdoor installation, the load capacities must be reduced due to wind and snow loads. Csdsfdkb Topfx Af Tspu The substrate must be concrete, level, suitable for dowelling, and capable of absorbing the acting loads. Floor condition and load-bearing capacity, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to trade association recommendations, the rack uprights should project at least 500 mm above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reorder and extension possible at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized Cpjdpfx Ajd Tbbdjf Teu - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load identification plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed to ensure easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and able to support the applied loads. The ground condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, rack uprights should have at least 500 mm overhang above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms, 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright distance 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and system can be expanded at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Assembly instructions and capacity signs C4 according to DIN standard included - Expert telephone consultation - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with pre-delivery notification. Materials are sensibly packed for easy unloading on site. When installed outdoors, load capacities are reduced due to wind and snow loads. Codpsd Tqalefx Af Topu The base must be concrete, level, suitable for anchor fixing, and capable of bearing the loads. The floor condition and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The uprights must be anchored into the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that uprights extend at least 500 mm above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm, with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Incl. longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and extensions possible at any time - Offer available in larger quantities: approx. 40 uprights in stock Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with prior delivery notification. Material is sensibly packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level, and suitable for anchors, and capable of bearing the relevant loads. The customer is responsible for checking and ensuring the substrate conditions and load-bearing capacity as well as any potentially required official permits. Cpsdpsfdkb Uofx Af Teu Uprights must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights feature at least a 500 mm projection above the top storage level.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever rack, painted version (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 2.56 m, with base section, 1.0 m usable depth (1.2 m total depth) - 12 cantilever arms, 1.0 m usable depth - Longitudinal and diagonal bracing for 4 m rack length (spacing 1.3 m) - Fastening material (bolts, nuts, and washers) (*No paint damage!) Net price for pickup: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolt-in system) - Surface painted according to RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per frame: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per frame as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight shipping with advance notification before delivery. The material is packed efficiently to enable easy unloading. The subfloor must be made of concrete, level and suitable for anchoring, and capable of bearing the applied loads. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and obtaining any necessary official permits. Cpodpfxsguk A Hs Af Tsu Rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to German professional association guidelines, it is recommended that the upright frames extend at least 500 mm above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever rack used: Bolted system in hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with foot sections 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) Cpedjguk Dkspfx Af Tju - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total racking length = 4,000 mm - Including fastening material (without floor anchors) - Comes with assembly instructions and C4 load labels according to DIN standard - Expert consultation by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice prior to delivery. Material is well-packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for doweling, and capable of bearing the loads involved. The client is responsible for ensuring the condition and load-bearing capacity of the floor as well as obtaining any necessary official permits. The rack uprights must be anchored in the floor on site—a wall anchoring is neither required nor recommended. According to professional association recommendations, the rack uprights should have a minimum 500 mm projection above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with 1,200 mm foot sections - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Includes mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - Supplied with assembly instructions and load labels C4 as per DIN standard Codpfxjfdkbhj Af Tjpu - Professional phone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice before delivery. The material is sensibly packaged to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow load. The subfloor must be concrete, level, and suitable for dowelling as well as able to bear the applied loads. The floor condition, bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should project at least 500 mm above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack Used: Bolt-together System in Hot-dip Galvanized Version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm effective depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard Cpodpfx Aeguk Dvof Tou - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification prior to delivery. The material is sensibly packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for doweling, and must be able to absorb the acting loads. Floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the employers’ liability insurance association, it is recommended that the uprights feature a minimum 500 mm overhang above the top storage level.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, 1. WEISHAUPT WM-G10/4-A (with gas train) - Output: 100-1100 kW - Version: ZM-LN - Year of manufacture: 2020 2. WEISHAUPT WM-G10/3-A (with gas train) - Output: 100-1000 kW Cpodewgyrtopfx Af Tsu - Version: ZM - Year of manufacture: 2013

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, WEISHAUPT WM-G10/A-4; Su dujų trasa - Galia: 110-1250 kW - Pagaminimo metai: 2011 - Vykdymas: ZM Cpsdswgym Djpfx Af Teu

Sąlyga: naujas, Gamybos metai: 2020, Model: KPZ-2 Type: Enclosed Working Dimensions: 900 mm W x 1300 mm H x 900 mm D External Dimensions: 980 mm W x 2100 mm H x 1600 mm D Operation: Electric Power: 0.69 kW x 2 Voltage: 380 V Frequency: 50-60 Hz Filter: Polyester Number of Filters: 3 Codjb Al Sbepfx Af Topu Filter Surface Area: 22.5 m² Fan: Aluminium Fan Noise Level: 74 dBa Air Consumption: 10,200 m³/h Warranty: 12 months Other models KPZ-4 / 6 / 8 / ... available on request.

Sąlyga: beveik kaip naujas (naudotas), Treif Brotschneidemaschine 4-24MM, in gutem Arbeitszustand. Für weitere Informationen senden Sie bitte eine Anfrage. Cedpfxjumpg Re Af Tepu