Weinig Quattromat 18 pirkti naudotą (533)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, Four-spindle moulding machine Number of spindles: 4 Spindle arrangement: bottom, right, left, top, bottom Working width: 13 - 230 mm Working height: 6 - 120 mm Feed speed: 8 m/min Feed motor power: 1.5 kW Spindle diameter: 40 mm Spindle speed: 6,000 rpm Axial adjustment range of spindles: 30 mm Adjustment range of planer spindle: 5 mm Planer spindle motor power: 5.5 kW Bodpfxjy Enlfe Akujli Top spindle motor power: 4.5 kW Vertical spindle motor power: 7.5 kW Motors are braked Feed roller diameter: 140 mm Length of the planer table: 2,000 mm Pneumatic pressure for feed rollers Infeed roller before 1st bottom spindle, pneumatically controlled Pressure roller left before machine infeed CE certified Including 4 pcs. cutterheads Dimensions approx. L x W x H = 3,000 x 1,250 x 1,550 mm Weight approx. 1,000 kg Note on used machinery: • Technical data and prior sale subject to change without notice. • Stated prices are ex-works, loaded free of charge. • The machine has been cleaned and function-tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machine at the location. • Special agreements are only valid in written form. (Inquiries will only be answered when you provide your address and telephone number!)

Būklė: labai geros būklės (naudotas), Ketursienis reismusas WEINIG Quattromat 23 Didžiausias obliavimo plotis: 230 mm Didžiausias obliavimo aukštis: 120 mm 4 galvos, galvos komplekte Bendra galia: 23 kW Bsdpfxey E Nlao Akueli Rankinis pakėlimas aukštyn-žemyn Rankinis obliavimo pločio reguliavimas Prekinio ženklo įrenginys labai geros būklės

Būklė: geras (naudotas), WEINIG Quattromat Four-Sided Planer Maximum planing width: 220 mm Maximum planing height: 120 mm Bodpjv Hqn Tsfx Akusli 4 cutter heads, complete with heads included Lower spindle - 4 kW; right and left spindles - 7.5 kW each; top spindle - 5.5 kW Feed on cardan shafts with infinitely variable speed control Electric height adjustment (up/down) Electric planing width adjustment Branded machine, well maintained and in good condition

Būklė: labai geros būklės (naudotas), WEINIG Quattromat Q23P, S/N 86825, Year of manufacture: 1999 Machine with full enclosure and integrated sound and dust protection. Technical data: Planing width: min. approx. 13 mm / max. 230 mm (with 125 mm cutting circle) Planing height: min. approx. 6 mm / max. 120 mm (with 125 mm cutting circle) Feed speed: 8 m/min, feed motor 1.5 kW Spindle configuration: 1st spindle bottom, motor 5.5 kW 2nd spindle right (joining) / 3rd spindle left, motor 7.5 kW 4th spindle top, motor 5.5 kW Spindle diameter D = 40 mm Accessories/Extras: 2000 mm infeed table with adjustable fence (10 mm adjustment range) Grooving device with joining rebate cutter Manual wax pump Pneumatic pressure for feed rollers Pneumatically cycled infeed roller before infeed table Blodpfx Aey Dugaokuei Centralized lubrication points at the front of the machine SICO counters Set of WEINIG Centrolock 533 planer heads Operating manual, service tools, spare parts catalogue, and electrical schematic Extraction / Connection / Dimensions: Central extraction nozzle ø 250 mm Air velocity: 26–30 m/s Total connected load approx. 19 kW Machine dimensions L=3050 mm, W=1230 mm, H=1640 mm Condition: Used, fully functional – in good condition as shown in the pictures Payment: Net cash prior to loading Delivery time: By arrangement Delivery: EXW Inspection: Possible at any time by appointment

Būklė: geras (naudotas), Gamybos metai: 2015, used, in good condition Year of manufacture: August 2015 (commissioned end of 2016) Technical Description Working width (with tooling diameter 125 mm): 20 - 230 mm Working height (with tooling diameter 125 mm): 8 - 120 mm Six standard upper feed rollers Two driven rollers in the machine table 1st Spindle First lower horizontal spindle Motor with brake 5.5 kW (7.5 HP) Diameter 40 mm Speed 6,000 rpm Tooling swing circle 125 - 145 mm Rabbetting unit, incl. rabbet cutter 2nd Spindle First right vertical spindle 5.5 kW (7.5 HP) Individual motor with brake Diameter: 40 mm Blsdpfoqu Sc Hjx Akusi Speed: 6,000 rpm Tooling swing circle 40 mm below table: 100 - 200 mm Tooling swing circle 55 mm below table: 100 - 180 mm Max. tool diameter behind fence 180 mm Max. profile depth 35 mm Axial adjustment range 55 mm 3rd Spindle First left vertical spindle Individual motor with brake 7.5 kW (10 HP) Diameter 40 mm Speed 6,000 rpm Tooling swing circle 40 mm below table 100 - 200 mm Tooling swing circle 55 mm below table 100 - 180 mm Max. profile depth 35 mm Axial adjustment range 55 mm 4th Spindle First upper horizontal spindle Motor with brake 7.5 kW (10 HP) Diameter 40 mm Speed 6,000 rpm Tooling swing circle 112 - 200 mm Tooling swing circle for straight knife heads max.: 180 mm Max. profile depth 35 mm Axial adjustment range 40 mm Split pressure shoe before upper spindle, adjustable to tooling diameter and can be swung away from tool, spring-loaded. 5th Spindle Second upper horizontal spindle Motor with brake 7.5 kW (10 HP) Diameter 40 mm Speed 6,000 rpm Tooling swing circle 112 - 200 mm Tooling swing circle for straight knife heads max.: 180 mm Max. profile depth 35 mm Axial adjustment range 40 mm Split pressure shoe before upper spindle, adjustable to tooling diameter and can be swung away from tool, spring-loaded. 6th Spindle Second lower horizontal spindle Motor with brake 7.5 kW (10 HP) Diameter 40 mm Speed 6,000 rpm Tooling swing circle 112 - 200 mm Max. profile depth 15 mm Axial adjustment range 35 mm Spindles in general All profiling spindles dynamically balanced for high concentricity accuracy. Feed System Frequency-controlled feed 5 - 30 m/min. Stepless adjustable with brake 4 kW (5.5 HP) Machine Base, Tables, and Fences Manual lubricant pump for table de-resination Machine Operation Memory function For saving profile setting values. Spindle axes with electronic double displays. Function: - Store setting values of the manufactured profile at the press of a button under a profile number - When the profile number is recalled, the electronic double displays show the setting values - By manually adjusting the spindle, the displays are synchronized - 99 memory slots Electronic height adjustment of the feed Centralized lubrication points at the front of the machine

Būklė: labai geros būklės (naudotas), CATALOG NUMBER 7133 Blodpfxozh Iu Ao Akusi TECHNICAL DATA - Max. workpiece width: 220 mm - Max. workpiece height: 120 mm – 5 spindles: 1) Lower horizontal, 220 mm, 5.5 kW 2) Right vertical, 120 mm 3) Left vertical, 120 mm; 2 and 3: 11 kW 4) Upper horizontal, 220 mm, 11 kW 5) Lower horizontal, 220 mm, 5.5 kW - All spindles adjustable (up/down, right/left) - Spindle diameter: 40 mm - Pneumatic pressure rollers - Top: 4 driven, toothed infeed rollers (including 2 double) - Top: 1 double outfeed roller, smooth, rubber-coated - Bottom: 1 driven outfeed roller, rubber-coated - Feed via cardan shafts - Variable feed speed - Feed motor: 2.2 kW - Lifting motor: 0.25 kW - Electric thickness adjustment - Infeed table length: 1970 mm - Central lubrication system - Extraction port diameter: 4x120 mm, 140 mm - Dimensions (LxWxH): 3500x1550x1400 mm - Weight: 1750 kg ADVANTAGES – Equipped with 5 heads – German-made – Original paint (not repainted) – Used planer, very good condition Net price: 43,900 PLN Net price: 10,450 EUR (depending on exchange rate 4.2 EUR) (Prices subject to change with significant fluctuations)

Būklė: labai geros būklės (naudotas), Catalogue number: 7715 TECHNICAL DATA - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Bottom horizontal 220 mm 5.5 kW 2) Right vertical 130 mm 7.5 kW 3) Left vertical 130 mm 7.5 kW 4) Right vertical 130 mm 5.5 kW 5) Top horizontal 220 mm 11 kW – 5th spindle electrically adjustable up/down 6) Bottom horizontal 220 mm 5.5 kW 7) Bottom horizontal 220 mm 5.5 kW – 7th spindle with support and Jointer system (cutter head sharpening) 8) Universal 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm From above: - 6 twin-toothed feed rollers + 1 single - 3 twin smooth rubber outfeed rollers + 3 single - Meter counter From below: - Toothed, driven, swiveling infeed roller in the lower table - 3 smooth steel driven rollers - Feed via Cardan shafts - Pneumatically loaded rollers - Infinitely variable feed speed + 2-speed gearbox 10–60 m/min - Feed motor: 10 kW - Electric thickness adjustment - Lifting motor: 0.75 kW - Central table lubrication - Extraction outlets: 5x140 mm, 3x120 mm - Machine dimensions (L/W/H): 4680x1780x1850 mm - Control cabinet dimensions (on pallet): 1020x1000x2230 mm - Weight: approx. 5000 kg ADVANTAGES – Equipped with 8 cutterheads – Universal spindle – Suitable for wet and dry wood – German-made, WEINIG brand – Factory finish (not repainted) – Very low operating hours – Used planer in excellent condition Net price: 145,900 PLN Bodpfx Akjzh Ipmjuoli Net price: 34,750 EUR (depending on EUR/PLN rate of 4.2) (Prices may vary due to exchange rate fluctuations)

Būklė: labai geros būklės (naudotas), CATALOG NUMBER: 6575 TECHNICAL SPECIFICATIONS - Maximum working width: 230 mm - Maximum working height: 170 mm - 7 spindles: Blodjzh Ipaepfx Akuji 1) Bottom horizontal spindle: 230 mm, 11 kW 2) Right vertical spindle: 170 mm 3) Left vertical spindle (spindles 2 and 3): 170 mm, 11 kW 4) Right horizontal spindle: 170 mm, 5.5 kW 5) Top horizontal spindle: 230 mm, 11 kW 6) Bottom horizontal spindle: 230 mm, 7.5 kW 7) Universal spindle: 230 mm, adjustable 360°, 7.5 kW - All spindles adjustable up/down, right/left - Spindles 3 and 5 electrically adjustable - ATS (Automatic Tool Setting) - Spindle diameter: 40 mm - Electric brakes - 4 top feed rollers, toothed, including 1 double - Top double rubber feed roller - Top double rubber outfeed roller - 2 bottom metal feed rollers, smooth - Bottom double rubber feed roller - Feed on Cardan shafts - Pneumatically pressed rollers - Stepless feed speed adjustment: 6–24 m/min - Feed motor: 5.5 kW - Electric planer thickness adjustment - Lifting motor: 0.55 kW - Centralized table lubrication - Extraction port diameter: 7 x 140 mm - Dimensions (L x W x H): 5800 x 2050 x 1850 mm - Approximate weight: 4500 kg FEATURES - German-made, WEINIG brand - 7-head machine - Universal spindle - Equipped with ATS - Suitable for wet and dry wood - Used planer, in very good condition Net price: 146,900 PLN Net price: 34,980 EUR Net price calculated at 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Būklė: labai geros būklės (naudotas), CATALOG NUMBER 7890 Technical specifications: - Track width: 245 mm - Arbor width for edger: 380 mm - Arbor width for multirip saw: 320 mm Blsdezhvhkjpfx Akusi - Max. saw blade diameter: 350 mm - Saw blade bore diameter for edger: 80 mm - Saw blade bore diameter for multirip saw: 65 mm - Max. cutting height: 120 mm - Table width (with clearance): 900 mm - Table length: 1780 mm – Top section: - Kickback pawls/rejectors - Pressure roller, smooth - Kickback pawls - Pressure roller, smooth - Insert for short pieces - Shaft with saws - 2 pcs. smooth pressure rollers – Bottom section: - Guide - Kickback pawls/rejectors - Track - Central lubrication - Laser - Stepless feed speed adjustment - Feed motor: 1.1 kW - Main motor: 30 kW - Manual lifting of the main assembly - Manual lifting of the saw shaft - Extraction port diameter: 210 mm - Overall dimensions (L/W/H): 1900x1500x1800 mm - Weight approx.: 2000 kg ADVANTAGES – German manufacturing – Stepless feed speed control – Shaft with floating blade for edging – Sleeve for multirip saw included – Laser – Insert for short pieces – Used multirip saw, very good condition Net price: 55,900 PLN Net price: 13,300 EUR (calculated at 4.2 EUR/PLN) (Prices may vary depending on exchange rate fluctuations)

Būklė: labai geros būklės (naudotas), Four-sided planer WEINIG HYDROMAT 22 AL - Max. working width: 220 mm Bjdpfxoy Ux Dqj Akuoli - Max. working height: 130 mm - 8 spindles: 1) Bottom horizontal 220 mm 5.5 kW 2) Right vertical 130 mm 7.5 kW 3) Left vertical 130 mm 7.5 kW 4) Right vertical 130 mm 5.5 kW 5) Top horizontal 220 mm 11 kW – 5th spindle electrically adjustable up/down 6) Bottom horizontal 220 mm 5.5 kW 7) Bottom horizontal 220 mm 5.5 kW – 7th spindle with steady rest + Jointer system (cutterhead sharpening) 8) Universal 220 mm, 360° adjustable 7.5 kW - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm From above: - 6 feed rollers, double-toothed + 1 single - 3 outfeed rollers, rubber-coated, double smooth + 3 single - Meter counter From below: - 1 infeed roller, toothed, driven, swiveling in the lower table - 3 metal feed rollers, smooth - Feed on cardan shafts - Pneumatically loaded rollers - Infinitely variable feed speed + 2 gears, 10–60 m/min - Feed motor: 10 kW - Electric thickness adjustment - Body elevation motor: 0.75 kW - Central table lubrication - Extraction ports: 5 x 140 mm, 3 x 120 mm - Machine dimensions (LxWxH): 4680 x 1780 x 1850 mm - Control cabinet dimensions (on pallet): 1020 x 1000 x 2230 mm - Weight: approx. 5,000 kg Feeder with centering device: - Roller width: 450 mm - 1 toothed feed roller on infeed - 22 smooth feed rollers - Top pressure adjustable - Feeder length: 9,020 mm - Infinitely variable speed regulation: 10–60 m/min - Motor: 0.75 kW - Dimensions (LxWxH): 9,020 x 790 x 1,150 mm Net price: 179,900 PLN Net price: 42,850 EUR (based on an exchange rate of 4.2 EUR/PLN). (Prices may vary with larger rate fluctuations)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, Keturside obliavimo staklės Weinig PROFIMAT 22N – po techninės apžiūros – labai geros būklės – Techninė dokumentacija (DTR) TECHNINIAI PARAMETRAI: obliavimo plotis: 220 mm obliavimo aukštis: 120 mm veleno skersmuo: 40 mm apatinė galva: 4 kW dešinė galva Bodpfx Aothfh Eskujli kairė galva: 11 kW viršutinė galva: 5,5 kW apatinė galva: 4 kW padavimo variklis: 2,2 kW padavimo greitis: 6–22 m/min keturi viršutiniai vilkimo plieniniai volai vienas viršutinis vilkimo guminis volas padavimas per kardano velenus pneumatinis prispaudimas elektrinis aukščio reguliavimas įvadinio stalo ilgis: 2485 mm staklių matmenys (ilgis/plotis/aukštis): 400 / 180 / 170 cm svoris: ~1800 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 1988, Ketursienė obliavimo staklės WEINIG PROFIMAT 22N, Nr. 4 – Techninė dokumentacija (DTR) – Pagaminta Vokietijoje – Gamybos metai: 1988 – Reguliuojamos galvos TECHNINIAI PARAMETRAI: obliavimo plotis: 220 mm obliavimo aukštis: 120 mm veleno skersmuo: 40 mm 1) apatinė galva: 5,5 kW 2) dešinė galva 3) kairė galva: 7,5 kW 4) viršutinė galva: 7,5 kW pavaros variklis: 2,2 kW pavaros greitis: 6 – 20 m/min keturi viršutiniai plieniniai traukimo voleliai Bjdpfei Dn Nuox Akusli vienas viršutinis traukimo volelis su guma vienas traukimo volelis stalo plokštumoje pavara per kardano velenus elektrinis aukščio reguliavimas įvadinio stalo ilgis: 1975 mm centrinis tepimas pneumatiniai spaustuvai staklių matmenys (ilgis / plotis / aukštis): 350 / 200 / 170 cm svoris: ~1800 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 1995, Four-Sided Planer Weinig Profimat 23E - German production - Year of manufacture: 1995 - Right and left spindles equipped with end-milling cutters ensuring parallelism and a 90° right angle - Element width measurement - Electronic width adjustment TECHNICAL PARAMETERS: Planing width: 230 mm Planing height: 120 mm Electronic planing width control 1st (bottom) spindle: 4 kW 2nd (right) spindle: 4 kW Bedpfx Akeibq Nioujli 3rd (left) spindle: 4.2 kW (end milling) 4th (right) spindle: 4.2 kW (end milling) 5th (top) spindle: 7.5 kW Element width measurement Electric adjustment of feed roller height Electric adjustment of top spindle height Spindle diameter: 40 mm Six upper steel rollers One upper rubber roller One feed roller integrated into the table Pneumatic pressure system Feed driven by cardan shafts Length of infeed table: 2,470 mm Port diameter: 140 mm Machine dimensions: 456 x 240 x 220 cm Weight: 4,000 kg

Būklė: labai geros būklės (naudotas), Catalogue number 7994 TECHNICAL DATA - Maximum working width: 230 mm - Maximum working height: 130 mm 7 spindles: 1) Bottom horizontal: 230 mm, 4 kW 2) Right vertical: 130 mm 3) Left vertical: 130 mm (spindles 2 and 3), 11 kW 4) Top horizontal: 230 mm, 5.5 kW 5) Top horizontal: 230 mm, 5.5 kW Top horizontal spindles 4 and 5 adjustable electrically up/down 6) Bottom horizontal: 230 mm, 4 kW 7) Universal: 230 mm, adjustable 360° angle, 5.5 kW Bjdoy T Nu Dopfx Akueli - All spindles adjustable up/down and right/left - Spindle diameter: 40 mm - 4 top infeed feed rollers, toothed - 4 top outfeed feed rollers, rubber, smooth finish, including 3 double rollers - 1 metal feed roller from below - Feed drive on Cardan shafts - Pneumatic feed roller pressure - Variable feed speed control via inverter - Feed motor: 3 kW - Working pressure: 6–10 bar - Electric thickness adjustment - Centralized table lubrication - Infeed table length: 1960 mm - Extraction port diameters: 3x120 mm, 4x140 mm - Dimensions (L/W/H): 5360x1800x1660 mm - Weight: approx. 4000 kg ADVANTAGES – German-made, WEINIG brand – With 7 heads – DTR technical documentation – Universal spindle – Used planer, in very good condition Net price: 75,900 PLN Net price: 18,070 EUR (based on 4.2 EUR exchange rate) (Prices may change with significant exchange rate fluctuations)

Būklė: labai geros būklės (naudotas), Katalogo numeris 7784 TECHNINIAI DUOMENYS - Veleno skersmuo: 30 mm - Veleno darbinis aukštis: 150 mm - Keičiama velenas - Veleno užrakinimas - Reguliavimas aukštyn/žemyn ir kampas - Originali ketinė liniuotė su pilnu reguliavimu - 4 sukimosi greičiai + dešinė/kairė: 3000/5000/6000/10000 aps./min - Stalo matmenys: 1120x800 mm - Variklis: 3,7 kW - Matmenys (ilgis/plotis/aukštis): 1100x1400x1160 mm - Svoris: 775 kg PRIVALUMAI – Vokiška gamyba – Naudota frezavimo staklė – Labai gera būklė Bledpfoy Tivhex Akuoi Grynoji kaina: 6900 PLN Grynoji kaina: 1640 EUR Grynoji kaina apskaičiuota pagal 4,2 PLN/EUR kursą (Pastaba: esant dideliems kurso svyravimams, kaina gali keistis)

Būklė: labai geros būklės (naudotas), Catalogue number: 7289 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 170 mm 6 spindles: 1) Bottom horizontal: 230 mm, 5.5 kW 2) Right vertical: 170 mm 3) Left vertical: 170 mm (spindle 2 & 3) 11 kW 4) Top horizontal: 230 mm, 11 kW 5) Top horizontal: 230 mm, 7.5 kW 6) Bottom horizontal: 230 mm, 11 kW - All spindles adjustable up/down, right/left - Spindles 4 and 5 electrically adjustable up/down - Spindle speed: 8,000 rpm - Spindle diameter: 40 mm - All spindles fitted with electric brake - 6 top infeed, feed, toothed rollers, including 1 double - Top outfeed, feed, rubber, double roller - Bottom outfeed, feed, rubber, double roller - Side pressure - Feed on Cardan shafts - Pneumatically pressed rollers - Stepless feed speed adjustment: 6–24 m/min - Feed motor: 4 kW - Electric thickness adjustment - Body lifting motor: 0.55 kW - Central table lubrication - Extraction outlets diameter: 6 x 140 mm - Dimensions (L x W x H): 4900 x 2400 x 2000 mm - Weight: approx. 4000 kg ADVANTAGES – German-made, WEINIG brand – With 6 cutterheads – Unpainted – Used thicknesser/planer, very good condition Original photos Bledpoy N Ahiefx Akusi Net price: 142,900 PLN Net price: 34,000 EUR (based on exchange rate 4.2 EUR) (Prices may vary depending on rate fluctuations)

Būklė: labai geros būklės (naudotas), Marinus Machines V&G 400 serija, Pravaeinė galų sujungimo staklė, tinkama fiksuoto arba atsitiktinio ilgio ruošiniams, pagal poreikį. Didžiausias darbo ilgis iki 6 m, minimalus darbo ilgis: 500 mm. Bendra galia: apie 32 kW, 400V 50Hz. Galimas našumas iki 20 vnt per minutę, priklausomai nuo ilgio. PLC valdymas. Pilna saugos apsauga. Bljdpfx Akjwz Imbsuoi

Būklė: beveik kaip naujas (naudotas), Pertraukos dvišakiai galiniai apipjaustymo pjūklai su tiesioginiu padavimu. 2 x 3 kW pjūklo varikliai. Padavimo variklis su variatoriumi. Galo apipjaustymo talpa nuo 300 mm iki 3100 mm. Tinka naudoti su formavimo staklių padavimu ar panašia įranga. Blodsif N Sxjpfx Akuji

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Galvų galąstuvas Weinig Rondamat 960 PowerLock Maks. įrankio plotis: 240 mm Šlifavimo disko skersmuo: 150–225 mm Veleno apsukų skaičius reguliuojamas dažnio keitikliu: 1500–3000 aps./min Padėjimo kampas – radialinis peilio nugarėlėje: 10–30° Šoninis kampas rankiniu režimu: 0–20° Įrankių tvirtinimas: PowerLock Ši tiksli peilių galąstuvas skirta: Bljdpfxozhbrus Akuoi – Profilinių peilių galandimui ir gamybai iš vientisos medžiagos pagal šabloną – Tiesių obliavimo peilių papildomam galandimui pjaunamojoje galvoje

Būklė: labai geros būklės (naudotas), Catalog number 6747 TECHNICAL DATA - Maximum planing width: 170 mm - Maximum planing height: 130 mm 7 spindles: 1) Bottom horizontal 170 mm 4 kW 2) Right vertical 130 mm 5.5 kW 3) Left vertical 130 mm 5.5 kW 4) Right vertical 130 mm 5.5 kW 5) Top horizontal 170 mm 4 kW - 5th spindle electrically adjustable up/down 6) Bottom horizontal 170 mm 5.5 kW 7) Universal 170 mm, adjustable to 180°, 7.5 kW - Spindle diameter: 35 mm (all spindles) Bsdpfx Akozcu Rzeueli - All spindles adjustable vertically and horizontally - Top feed: 6 toothed feed rollers, including 2 double rollers - Top outfeed: 4 rubber feed rollers - Pneumatically pressed rollers - 1 side pressure roller - 2 guiding rails on the table - Electric thickness adjustment 0.37 kW - Infeed table length: 2480 mm - Infinitely variable feed speed - Feed motor: 2.2 kW - Extraction ports: 1x135 mm, 5x120 mm - Dimensions (LxWxH): 5550x1900x1660 mm - Weight: approx. 3500 kg ADVANTAGES – Made in Germany – 7-head machine – Universal spindle – Used planer, very good condition Net price: PLN 27,900 Net price: EUR 6,640 Net price calculated at exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may be adjusted)

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1979, Raimann saw cutting height: 90 mm, chain width: 250 mm, after overhaul; the machine has undergone a complete refurbishment. Motor: 22 kW. Cutting width: 250 mm. Shaft diameter: 80 mm. The drive from the main motor to the shaft is via a flat belt. Bljdpsh Rv Eyjfx Akuji

Būklė: labai geros būklės (naudotas), KATALOGO NR. 6946 TECHNINIAI DUOMENYS - maksimalus apdirbamo elemento plotis: 210 mm - maksimalus apdirbamo elemento storis: 120 mm - velenų kiekis: 2 vnt - velenų skersmuo: 50 mm Iš viršaus: - 3 įvesties volai, traukiantys, guminiai, lygūs, iš kurių 2 dvigubi - 2 išvesties volai, traukiantys, guminiai, iš kurių 1 dvigubas - galvutės ant laikiklių - galvučių aukščio reguliavimas aukštyn/žemyn - elektrinis viršutinės galvutės aukščio reguliavimas - elektrinis obliavimo storio nustatymas - velenai su stabdžiu Bedjzcdz Aspfx Akusli - pagrindinis variklis 2×5,5 kW - tolydus padavimo greičio reguliavimas - padavimo variklis 3 kW - padavimas per Kardano velenus - ištraukimo jungties skersmuo 2×160 mm - matmenys ilgis/plotis/aukštis: 2350×1780×1950 mm - svoris: 1882 kg – vokiška gamyba – jointeriai – peilių galvučių galandimui – komplekte 2 Hydro galvutės – nedažyta – labai gera būklė, naudotas oblius Kaina be PVM: 33 900 PLN Kaina be PVM: 8 070 EUR Kaina be PVM perskaičiuota pagal kursą 4,2 PLN/EUR (Esant didesniems valiutų svyravimams, kaina gali keistis)

Būklė: labai geros būklės (naudotas), CATALOG NUMBER: 6950 TECHNICAL DATA - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm – 4 spindles: 1) Bottom horizontal, 220 mm, 5.5 kW 2) Right vertical, 130 mm Bedszcc Axspfx Akusli 3) Left vertical, 130 mm; (spindles 2 and 3) 5.5 kW 4) Top horizontal, 220 mm, 5.5 kW - All 4 spindles electrically adjustable up/down - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - 4 upper infeed feed rollers, geared, including 1 double roller - 1 upper outfeed double feed roller, rubber-coated - 1 lower outfeed feed roller, rubber-coated - Feed via Cardan shafts - Variable feed speed adjustment: 6–22 m/min - Feed motor: 2.2 kW - Lifting motor: 0.55 kW - Electric thickness adjustment - Infeed table length: 1970 mm - Central lubrication - Extraction port diameter: 3x120 mm, 140 mm - Enclosed in soundproof cabin - Dimensions (LxWxH): 3350 x 1400 x 1400 mm, weight: 1700 kg – Made in Germany – Unpainted – Used planer/moulder, very good condition Net price: 33,900 PLN Net price: 8,070 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may be subject to change)

Būklė: labai geros būklės (naudotas), Catalogue number: 7706 TECHNICAL DATA - Max. working width: 220 mm - Max. working height: 120 mm - 5 spindles: 1) Bottom horizontal: 220 mm, 4 kW 2) Right vertical: 120 mm 3) Left vertical: 120 mm; spindles 2 and 3 - 7.5 kW 4) Top horizontal: 220 mm, 5.5 kW 5) Lower horizontal: 220 mm, 4 kW - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm Bjdpfjzccz Iox Akueli - Pneumatic pressure rollers - Top infeed: 4 driven, toothed rollers (including 1 double roller) - Top outfeed: smooth rubber-coated driven roller - Bottom outfeed: rubber-coated driven roller - Feed movement via cardan shafts - Infinitely variable feed speed: 6–36 m/min - Feed motor: 2.2 kW - Lifting motor: 0.25 kW - With brake - Electric thickness adjustment - Centralised table lubrication - Infeed table length: 1970 mm - Extraction port diameter: 4x120 mm, 140 mm - Dimensions (LxWxH): 3450x1600x1450 mm - Weight: 1112 kg Net price: 39,900 PLN Net price: 9,500 EUR (based on the exchange rate of 4.2 EUR) (Prices may change depending on currency fluctuations)

Būklė: labai geros būklės (naudotas), CATALOG NUMBER 7221 TECHNICAL DATA - Min / max width of processed element: 45 / 150 mm - Min / max height of processed element: 15 / 50 mm 3 spindles: 1) Bottom horizontal 11 kW 2) Top horizontal 22 kW (7000 rpm) 3) Bottom horizontal 5.5 kW Spindle diameter: 40 mm - Spindles 1 and 3 manually adjustable up/down, left/right - Spindle 2 manually adjustable left/right - Spindle 2 electrically adjustable up/down - Spindles 2 and 3 equipped with brakes From above: - 3 infeed traction rollers, metal, geared - 1 double outfeed traction roller, rubber From below: - Infeed pressure system - Ribbed cast iron table - Traction roller, metal, smooth - Electric thickness adjustment - Stepless feed speed adjustment: 6–24 m/min - Feed motor: 3 kW - Feed on cardan shaft rollers - Infeed table length: 1970 mm - Automatic table lubrication system - Extraction port diameter: 1x150 mm, 2x140 mm - Dimensions (LxWxH): 3070x2000x1800 mm - Weight: 2000 kg Bjdpfx Aozccb Uekusli ADVANTAGES – German manufacture – 3-head configuration – Suitable for lamella processing – Ribbed table – Complete cutter head set included – Unpainted – Very good condition – Used planer Net price: 125,900 PLN Net price: 29,980 EUR Net price calculated at exchange rate 4.2 PLN/EUR (in case of major exchange rate fluctuations, the price may change)