Weinig Powermat 2500 pirkti naudotą (470)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 230 mm, obliavimo aukštis: 120 mm, ašies skersmuo: 50 mm, obliavimo plotis: 230 mm, darbinio aukščio: 120 mm, padavimo variklio galia: 37 000 W, veleno greitis (maks.): 6 000 aps./min, veleno greitis (min.): 3 000 aps./min, aukščio reguliavimo tipas: elektrinis, obliaus veleno skersmuo: 50 mm, įvesties srovės tipas: trifazis, ašies skaičius: 10, galia: 574 kW (780,42 AG), įėjimo dažnis: 50 Hz, Įranga: kabina, sūkių greitis be galo kintamas, variklio stabdis, Weinig Powermat 2500 10 spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 37 kW / 12-120 m/min, Spindle arrangement: 1- Bottom (22 kW) - with hydro clamp and fully automatic straight jointing 2- Right (11 kW) 3- Left (11 kW) 4- Top (37 kW) - with fully automatic straight jointing 5- Bottom (18.5 kW) with hydro clamp and fully automatic straight jointing 6- Top (18.5 kW) - with hydro clamp and fully automatic straight jointing 7- Top (53 kW) - with hydro clamp, speed 3000-6000 rpm 8- Bottom (53 kW) - with hydro clamp, speed 3000-6000 rpm 9- Top (53 kW) - with hydro clamp, speed 3000-6000 rpm 10- Bottom (53 kW) - with hydro clamp, speed 3000-6000 rpm Short infeed table, 1.3 meters (4 rollers) with 2 powered rollers above the table, and 2 powered rollers in the table. Both table rollers are liftable. Table height adjustment via electronic digital display. Incl. 2 heavy-duty side pressure rollers, diameter 140mm, pneumatic. Support feet height: 320 mm for table height of 1190 mm Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table plates). Special coating to protect table plates, fences, and guide rails against excessive wear. Recommended for processing abrasive materials (e.g. tropical woods, MDF, chipboard, plastics, metals). Ijdpfx Aoxz Thbjfwea Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, diameter 120 mm. In the area of the right and left spindle.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, X ašies padavimo greitis: 120 m/min, darbinis plotis: 230 mm, obliavimo aukštis: 120 mm, ašies skersmuo: 50 mm, obliavimo plotis: 230 mm, darbinio aukščio: 120 mm, padavimo variklio galia: 37 W, veleno greitis (maks.): 6 000 aps./min, veleno greitis (min.): 3 000 aps./min, aukščio reguliavimo tipas: elektrinis, obliaus veleno skersmuo: 50 mm, įvesties srovės tipas: trifazis, ašies skaičius: 10, galia: 574 kW (780,42 AG), įėjimo dažnis: 50 Hz, Įranga: kabina, sūkių greitis be galo kintamas, variklio stabdis, Weinig Powermat 2500 10 spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 37 kW / 12-120 m/min, Spindle arrangement: 1 - Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2 - Right (11 kW) 3 - Left (11 kW) 4 - Top (37 kW) – with fully automatic straight jointer 5 - Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6 - Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7 - Top (53 kW) – with hydraulic clamping, speed 3000–6000 rpm 8 - Bottom (53 kW) – with hydraulic clamping, speed 3000–6000 rpm 9 - Top (53 kW) – with hydraulic clamping, speed 3000–6000 rpm 10 - Bottom (53 kW) – with hydraulic clamping, speed 3000–6000 rpm Short infeed table 1.3 m (4 rollers), with 2 driven rollers above the table and 2 driven rollers in the table. Both table rollers are raisable. Table height adjustment with electronic digital display. Incl. 2 heavy side pressure rollers, diameter 140 mm, pneumatic. Iedpfx Ajxvmm Tjfwja Support feet height 320 mm for table height 1190 mm. Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table plates). Special coating to protect the table plates, fences, and guide rails from excessive wear. Recommended for processing abrasive materials (e.g. tropical woods, MDF, chipboard, plastics, metals). Automatic lubricator for table resin removal. Driven rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above with diameter 120 mm, located near the right and left spindle.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Weinig Powermat 2400 Vierseitenhobelmaschine mit 7 Spindeln (Baujahr 2015) 50 mm Spindeln 6.000 U/min (kein Powerlock) Untere Spindel 15 kW + Außenlager Rechte Spindel 11 kW + Gerade Vorschneider Linke Spindel 11 kW + Gerade Vorschneider Iedpfxoxyik Aj Afwja Obere Spindel 15 kW + Gerade Vorschneider + Außenlager Untere Spindel 18,5 kW + Profilvorschneider Obere Spindel 18,5 kW + Gerade + Profilvorschneider Untere Spindel 18,5 kW Gerade Vorschneider + Außenlager 11 kW Vorschubmotor Automatische Zentralschmierung Elektrisches Digitalanzeige-Memoriesystem Optional lieferbar mit Weinig Werkstückeinlauf und Auslauf

Sąlyga: naudotas, Weinig Powermat 500 obliavimas ir profiliavimo automatas, skirtas keturpusiam medienos obliavimui ir profiliavimui su CNC valdymu ir Powerlock greito keitimo sistema. Velenai: 7 Velenas 1: Apačioje / 7,5 kW / 8 000 aps./min Velenas 2: Dešinėje / 7,5 kW / 8 000 aps./min Velenas 3: Kairėje / 7,5 kW / 8 000 aps./min Velenas 4: Dešinėje / 7,5 kW / 8 000 aps./min Velenas 5: Viršuje / 7,5 kW / 8 000 aps./min Velenas 6: Viršuje / 7,5 kW / 8 000 aps./min Velenas 7: Apačioje / 7,5 kW / 8 000 aps./min Darbo plotis: 260 mm Darbo aukštis: 160 mm Padvimas: 30 m/min / 4 kW Obliavimo stalo ilgis: 2 500 mm Isdpfxexzdwys Afwsa Oro pagalvės stalas: Taip Valdymas: PowerCom Plus

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, Weinig Powermat 600 Isdpfx Aoxwtwbofwea Year of manufacture: 2014 5 spindles Feed motor: 3 kW 1st motor: 7.5 kW 2nd motor: 11 kW 3rd motor: 7.5 kW 4th motor: 7.5 kW Spindle configuration: bottom, right, left, top, bottom Soft start Heated control cabinet (Webasto) Pneumatic tables Manual adjustment of tables Electronic brakes Manual axis adjustment Stepless feed speed regulation

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 310 mm, obliavimo plotis: 310 mm, Weinig aukščiausios klasės modelis: Weinig Powermat 3000 Speciali 6 veržlių keturių pusių obliavimo staklės Visi varikliai su dažnio reguliavimu, 4000–12 000 aps./min. Ypatingai platus darbinis plotis – 310 mm Darbinis aukštis 160 mm, pasirinktinai – 200 mm Isdpfx Afexyxhwewja Visos galvutės su Powerlock Didelio greičio padavimas – 100 m/min Su profiliu ir tiesiu jointeriu Ašys valdomos CNC tiek ašine, tiek radialine kryptimis Trumpas įvado stalas – 1,1 m WMC Moulder Master Pilna komplektacija! Kaip nauja, niekada nenaudota gamyboje!

Sąlyga: geras (naudotas), Gamybos metai: 2020, gražus modernus rinkos lyderio Weinig obliavimo automatas, Powermat 700 modelis, 5 velenai, 5-asis velenas apačioje Ijdpfx Afexydmlewja

Gamybos metai: 2014, Sąlyga: paruoštas naudoti (naudotas), Šis WEINIG POWERMAT 1200 pagamintas 2014 m. Tai tvirta medžio frezavimo staklė, turinti darbo plotį nuo 20 iki 230 mm ir aukštį nuo 10 iki 160 mm, o tiekimo greitis siekia 6-36 m/min. Staklėje yra 8 obliavimo velenai, kiekvienas 40 mm skersmens, bei tik apie 5500 darbo valandų. Pasinaudokite proga įsigyti šias WEINIG POWERMAT 1200 medžio apdirbimo stakles. Daugiau informacijos suteiksime susisiekus. Isdpfxsxrwmce Afwja Pritaikymo sritys Frezavimas (Mediena)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Weinig Powermat 500 (6 Spindeln + Universaleinheit) CNC-Positionsverstellung. 4.798 Betriebsstunden Maschinennummer: 114015 (Baujahr 2010) Bearbeitungsmaß: 160 mm x 230 mm Alle 7 Spindeln mit Powerlock, 8.000 U/min: • Untere Spindel: 7,5 kW • Rechte Spindel: 11 kW • Linke Spindel: 11 kW • Obere Spindel: 15 kW • Obere Spindel: 15 kW • Untere Spindel: 7,5 kW • Universaleinheit: 7,5 kW Vorschubmotor: 5,2 kW Vorschubgeschwindigkeit: 30 m/min Zuführtisch: 2 m CNC-Achsenverstellung an den Spindeln 2, 3, 4, 5 und 7 Dreifach-CNC-Verstellung an der Universaleinheit Ausstattung mit Powercom Plus Iedpfxoxtwmfo Afwoa Optional lieferbar mit automatischer Ein- und Ausfuhr. Optional lieferbar mit Gesamt-Handlinglösung inkl. Stapler.

Sąlyga: naudotas, Obliavimo ir profiliavimo automatas Weinig Powermat 700 skirtas medienos keturpusiam obliavimui ir profiliavimui su CNC valdymu. Prieinamas pagal susitarimą nuo 2026 m. kovo mėn. Įrenginio pardavimas galimas tik su sąlyga, jei bus realizuota briketavimo presas (ref. Nr. 800055) arba visas obliavimo cechas (ref. Nr. 100101). Velenų skaičius: 6 Velenas 1: apačioje / 7,5 kW / 6 000 aps./min. Velenas 2: dešinėje / 15 kW / 8 000 aps./min. Velenas 3: kairėje / bendras variklis su #2 / 8 000 aps./min. Velenas 4: viršuje / 11 kW / 8 000 aps./min. Velenas 5: viršuje / 7,5 kW / 8 000 aps./min. Velenas 6: apačioje / 7,5 kW / 8 000 aps./min. Darbinis plotis: 230 mm Darbinis aukštis: 160 mm Veleno skersmuo: 40 mm Padavimas: 40 m/min / 5 kW Nivelyrinio stalo ilgis: 1 200 mm Iedpjxpuufefx Afwoa Valdymas: Memory Plus

Sąlyga: geras (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 10000241, ruošinio aukštis (maks.): 160 mm, ruošinio plotis (maks.): 310 mm, ašies skaičius: 4, WEINIG POWERMAT 1500 – SPECIALUS MEDIENOS FREZAVIMO STAKLIŲ KONFIGŪRACIJA DURŲ STOGELIŲ PLOKŠTĖMS Darbo plotis: 30 – 310 mm (su įrankio apėjimo skersmeniu 93–125 mm) Darbo aukštis: 10 – 160 mm (su įrankio apėjimo skersmeniu 93–163 mm) Staklių parametrų aprašymas: - Velenų skaičius: 4 - Apatinis velenas: 1 - Dešinysis velenas: 1 - Kairysis velenas: 1 - Viršutinis velenas: 1 - Kiekvienam velenui atskiras variklis - Elektroninė padavimo sistema su stabdžiu, nuolatinis greičio reguliavimas 5–40 m/min Trumpa padavimo stalas, 1,2 m ilgio su 2 varomaisiais volais virš stalo Ypač kietu sluoksniu padengtas stalo paviršius Rankinis tepalo siurblys Komplektacija WEINIG Comfort Set Ijdpfouygcwjx Afwja Valdymo sistema WEINIG MEMORY PLUS-SYSTEM CE ženklinimas Atitikties deklaracija

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2010, obliavimo aukštis: 200 mm, Four-sided planer Weinig Powermat 2000 XL: - German-made - Operating and technical documentation (DTR) with CE certification - Fully automatic control - PowerLock cutterheads - Year of manufacture: 2010 - Designed for wet wood TECHNICAL SPECIFICATIONS: - Planing width: 300 mm - Planing height: 200 mm Iodpjun Natjfx Afwoa - PowerLock cutterheads - Touchscreen control panel - Electronically adjustable cutterheads - Pneumatic pressure feed shoes 1st bottom cutterhead: 18.5 kW 2nd right cutterhead: 15 kW 3rd left cutterhead: 15 kW 4th top cutterhead: 22 kW with 1.5 kW side cutter 5th top cutterhead: 18.5 kW 6th bottom cutterhead: 20 kW - Cutterheads with automatic jointing system - Spindle rotation speed: 8000 rpm - Feed speed adjustable via inverter: 6 – 60 m/min - Six steel upper feed rollers - Three rubber-coated upper feed rollers - Upper feed rollers with support - Six table feed rollers, including 2 grooved rollers before the first cutterhead - Automatic central lubrication - Exhaust port diameter: 4 x 160 mm and 2 x 140 mm

Sąlyga: naudotas, Gamybos metai: 2004, Planer and moulding machine Weinig Powermat 2000 PowerLock Technical specifications Working width: 30 - 300 mm Working height: 19 - 200 mm First bottom spindle: Motor with brake: 18.5 kW Speed: 8000 rpm Tool diameter: 125 - 180 mm Second spindle: First right spindle: Motor with brake: 15 kW Tool diameter: 93 - 200 mm Third spindle: First left spindle: Motor with brake: 15 kW Tool diameter: 93 - 200 mm Fourth spindle: First top spindle: Motor with brake: 37 kW Iedpfx Afeunbrbewsa Tool diameter: 93 - 200 mm Fifth spindle: Second bottom spindle: Motor with brake: 22 kW PowerLock tool holder Speed: 8000 rpm Tool diameter: 93 - 225 mm Feed system: Frequency-controlled feed, infinitely variable 6 - 36 m/min.

Sąlyga: geras (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 108111, darbinis plotis: 240 mm, obliavimo aukštis: 160 mm, darbinio aukščio: 180 mm, Four-sided planer after maintenance, machine weight 3,900 kg. Iedpfjvrq U Dex Afwsa

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Weinig Powermat 500 (6 Spindeln + Universaleinheit) CNC-Positionsverstellung. 4.798 Betriebsstunden Maschinennummer: 114015 (Baujahr 2010) Bearbeitungsmaß: 160 mm x 230 mm Alle 7 Spindeln mit Powerlock, 8.000 U/min: • Untere Spindel: 7,5 kW • Rechte Spindel: 11 kW • Linke Spindel: 11 kW • Obere Spindel: 15 kW Iodpfxexgq Shs Afwea • Obere Spindel: 15 kW • Untere Spindel: 7,5 kW • Universaleinheit: 7,5 kW Vorschubmotor: 5,2 kW Vorschubgeschwindigkeit: 30 m/min Zuführtisch: 2 m CNC-Achsenverstellung an den Spindeln 2, 3, 4, 5 und 7 Dreifach-CNC-Verstellung an der Universaleinheit Ausstattung mit Powercom Plus Optional lieferbar mit automatischer Ein- und Ausfuhr. Optional lieferbar mit Gesamt-Handlinglösung inkl. Stapler.

Sąlyga: naudotas, Gamybos metai: 2014, Obliavimo ir profiliavimo automatas Weinig Powermat 600, skirtas keturšaliam medienos obliavimui ir profiliavimui. Velenai: 5 Pagaminimo metai: 2014 Darbinis plotis: 230 mm Darbinis aukštis: 160 mm Velenas 1: Apačia // 7,5 kW // 40 mm Velenas 2: Dešinė // 11 kW // 40 mm Velenas 3: Kairė // bendras variklis su velenu 2 // 40 mm Velenas 4: Viršus // 7,5 kW // 40 mm Velenas 5: Apačia // 5,5 kW // 40 mm Ijdpfx Aoxpvdzofwoa

Sąlyga: naudotas, Gamybos metai: 2014, Number of spindles: 5 pcs. Working width: 230 mm Planing height: 120 mm Surface table length: 2,500 mm Feed motor: 4 kW Feed speed: 5-30 m/min Control: Memory function Weinig Powermat 600 Compact ----- Machine is cleaned and fully inspected. Brief summary: ----- - 5 spindles - Powerful motors - Left and top spindle controlled for width and height Detailed description: ----- Technical data: Working width: 20-230 mm Working height: 10-120 mm Number of spindles: 5 1st spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 125 - 145 mm Tool circle diameter with rebate cutter: 130 - 160 mm Axial adjustment range: 5 mm Rebate device MarathonCoatin for table insert in front of the 1st lower tool holder Electronic digital readout for radial adjustment 2nd spindle - right ----- Motor with brake: 11.0 kW Shared motor with left tool holder Iedpfx Afswzmu Rewsa Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter 40 mm below table level: 93 - 200 mm Tool circle diameter 55 mm below table level: 93 - 180 mm Tool circle diameter for straight knife cutterheads max.: 163 mm Max. tool diameter behind fence line: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm 3rd spindle - left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter 40 mm below table level: 93 - 200 mm Tool circle diameter 55 mm below table level: 93 - 180 mm Tool circle diameter for straight knife cutterheads max.: 163 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm Radial spindle CNC-controlled 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 93 - 200 mm Tool circle diameter for straight knife cutterheads max.: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm Radial spindle CNC-controlled Divided pressure shoe in front of the top tool holder, adjustable to tool circle diameter and can be swung clear of the tool, spring-loaded. Pressure shoe before and outfeed after top spindle with electronic digital readouts, integrated in the memory function or PowerCom 5th spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 93 - 200 mm Max. profiling depth: 15 mm Axial adjustment range: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller before 1st lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment range of feed rollers relative to left tool holder, axial 35 mm Machine electrics ----- Operating voltage: 400 V (voltage range 380 - 420 Volts), 50 Hz. All spindles IE 2 version Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN60204, IEC-204-1. Other electrical standards are not taken into account. Mach...

Gamybos metai: 2008, Sąlyga: beveik kaip naujas (naudotas), Four-Sided Planer Weinig Powermat 500 - Year of manufacture: 2008 - Made in Germany Iedpfx Afsltla Sowsa - PowerCom control system - Capability to save tool profiles and positions - PowerLock tool clamping TECHNICAL PARAMETERS: Planing width: 300 mm Planing height: 200 mm PowerLock tool clamping PowerCom control with top and left spindle positioning 1st spindle: 11 kW 2nd spindle: 11 kW 3rd spindle: 11 kW 4th spindle: 15 kW 5th spindle: 15 kW Milling spindle: 1.5 kW, 12,000 rpm Spindle speed: 8,000 rpm Feed speed, infinitely adjustable: 6–36 m/min Feed drive motor power: 4 kW Five top steel feed rollers One top rubber feed roller One in-table feed roller Air cushion in the table Automatic central table lubrication Automatic spindle guideway lubrication Infeed table length: 1,970 mm Suction port diameters: 2 x 140 mm, 3 x 160 mm, 1 x 80 mm Total power: 70 kW, 140 A Machine dimensions: 500 x 225 x 242 cm Weight: 3,000 kg

Sąlyga: naudotas, Gamybos metai: 2020, mašinos/transporto priemonės numeris: 8613.27, darbinis ilgis: 2 500 mm, darbinis plotis: 1 350 mm, produkto aukštis (maks.): 33 mm, Weinig Profipress L II 2500 Comfort Press The set includes: - Loading station - Glue application station - Stacking station with the possibility of arranging in two rows - Press Iodpfxjwc Stue Afwoa - Unloading conveyor Maximum workpiece dimension: 2500*1350*33 mm Generator power: 25 kW The machine has been in operation at the facility since 01.2023 Net price listed

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weinig Powermat 500 Four-Sided Planer Isdpfxevfr Rge Afwsa Working width: 230 mm Working height: 160 mm Number of spindles: 6 Spindle configuration: - Bottom: 5.5 kW, 8000 rpm - Right: 5.5 kW, 8000 rpm - Left: 7.5 kW, 8000 rpm - Top: 7.5 kW, 8000 rpm - Bottom: 7.5 kW, 8000 rpm - Universal: 5.5 kW, 8000 rpm Spindle No. 6 equipped with PowerLock system Feed speed adjustable by inverter up to 30 m/min Feed rollers embedded in the working table (1 grooved roller for wet timber) Electromechanical adjustment of working height and width Pneumatic material hold-downs Drive via cardan shafts Total power: 41 kW Year of manufacture: 2005 CE certificate

Sąlyga: geras (naudotas), Gamybos metai: 2003, Weinig Powermat (Unimat) 2000 Speed Ijdpow Nqbcofx Afwea Visos Powerlock įvorės Apatinė: 15 kW, 8 000 aps./min. Dešinė: 15 kW, 4 000–12 000 aps./min su inverteriu Kairė: 15 kW, 4 000–12 000 aps./min su inverteriu Viršutinė: 22 kW, 8 000 aps./min. Viršutinė: 22 kW, 4 000–12 000 aps./min su inverteriu Apatinė: 15 kW, 4 000–12 000 aps./min su inverteriu Padavimo variklis 11 kW Padavimo greitis 40 m/min Automatinė tepimo sistema Atskiras valdymo pultas Pilna dokumentacija Gali būti komplektuojama su automatiniu padavimu ir išvedimu, jei reikia.

Sąlyga: naudotas, Siūlomi įrenginių paketai kompaktiškam obliavimo cechui, sudarytam iš šių mašinų: Isdpoxmh U Hsfx Afwsa - Keturpusė obliavimo staklė Weinig Powermat 700, pagaminta 2022 m. - Briketavimo presas Spänex SHB 250, pagamintas 2019 m. - Išilginio pjovimo diskinis pjūklas Jrion HFS-170/15-SA modelis - Ryšuliavimo įrenginys StraPack RQ-8S modelis - Juostinis pjūklas Hema UH 800 TR modelis - Nusiurbimo įranga: Spänex filtro bokštas ir Höcker Polytechnik ventiliatorius Įrenginiai vis dar veikia ir gali būti apžiūrėti prisijungus prie elektros bet kuriuo metu. Galimi susitarimai dėl pristatymo nuo 2026 m. kovo mėn. Papildoma informacija suteikiama pagal užklausą. Galimas dalinis pardavimas pagal susitarimą.

Sąlyga: naudotas, Number of spindles: 6 pcs Working width: 230 mm Planing height: 120 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min Weinig Powermat 400 with HSK/Powerlock, CNC controlled axial/radial adjustment ----- Machine is overhauled and function-tested! Summary: ----- 6 spindles with 8,000 rpm 5 x HSK/Powerlock Axial and radial CNC adjustment of spindles via control system CNC-controlled feed adjustment and positioning Detailed description: ----- Technical data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 6 1. Tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting circle: 93 - 160 mm Axial adjustment range: 5 mm Rabbetting device MarathonCoating on table insert in front of 1st lower tool holder 2. Tool holder - PowerLock - right ----- Iodpsuzaa Sjfx Afwsa Motor with brake: 11.0 kW Shared motor with left tool holder Speed including high-performance bearings: 8,000 rpm Tool cutting circle 40 mm below table level: 93 - 200 mm Tool cutting circle 55 mm below table level: 93 - 180 mm Tool cutting circle for straight knife heads max. 163 mm Max. tool diameter behind fence line: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm Spindle CNC-controlled, axial and radial 3. Tool holder - PowerLock - left ----- Motor with brake: Shared motor with 2nd spindle Speed including high-performance bearings: 8,000 rpm Tool cutting circle 40 mm below table level: 93 - 200 mm Tool cutting circle 55 mm below table level: 93 - 180 mm Tool cutting circle for straight knife heads max. 163 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm Spindle CNC-controlled, axial and radial 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed including high-performance bearings: 8,000 rpm Tool cutting circle: 93 - 200 mm Tool cutting circle for straight knife heads max.: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm Split pressure shoe in front of upper tool, adjustable to tool cutting circle and can be swung away from the tool, spring-loaded. Spindle CNC-controlled, radial 5. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed including high-performance bearings: 8,000 rpm Tool cutting circle: 93 - 200 mm Tool cutting circle for straight knife heads max.: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm Split pressure shoe in front of upper tool, adjustable to tool cutting circle and can be swung away from the tool, spring-loaded. Spindle CNC-controlled, axial and radial 6. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed including high-performance bearings: 8,000 rpm Tool cutting circle: 93 - 200 mm Max. profiling depth: 15 mm Axial adjustment range: 35 mm Spindle CNC-controlled, radial Feed system ----- Frequency-controlled feed, infinitely adjustable with brake: 4 kW, 5 - 30 m/min

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, veikimo valandos: 8 000 h, Four-sided planer Weinig Iodpowybrnsfx Afwea Model: Powermat 400 LE – machine with grooved table Year of manufacture: 2008 Operating hours: 8,000 Maximum working width: 230 mm Maximum working height: 120 mm The machine is equipped with 5 spindles featuring the Powerlock system Spindle configuration: - bottom: 5.5 kW - left and right: 7.5 kW each - top: 7.5 kW - bottom: 7.5 kW Spindle speed: 6,000 rpm Feed speed smoothly adjustable via inverter: 5 – 30 m/min Electronic spindle positioning – Memory system The machine is in very good technical condition, complete with cutterheads.

Sąlyga: naudotas, Number of spindles: 6 units Working width: 230 mm Planing height: 160 mm Surface table length: 1050 mm Feed motor: 7 kW Feed speed: 6–40 m/min Weinig Powermat 1200 ----- With infeed automation: Weinig wheel magazine EM 100 and linked with outfeed automation: Weinig High-Mech A 1 The machine will be completely refurbished at our warehouse prior to delivery! Detailed Description: ----- 1. Weinig Planer and Moulder Powermat 1200 ----- Technical Data: ----- Working width: 20–230 mm (with tool cutting circle 93–163 mm) Working height: 10–160 mm (with tool cutting circle 93–163 mm) 1st Spindle ----- First lower horizontal spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tool cutting circle: 125–180 mm With PowerLock: 93–180 mm Tool cutting circle for rebate cutter: 130–160 mm Axial adjustment: 17 mm Rebate device MarathonCoating before 1st lower tool holder 2nd Spindle ----- First right vertical spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tool cutting circle: 93–200 mm Maximum profiling depth: 35 mm Axial adjustment: 80 mm Radial adjustment Minimum tool diameter at fence level: 93 mm Maximum tool diameter behind fence level: 200 mm 3rd Spindle ----- First left vertical spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tool cutting circle: 93–200 mm Tool circle for straight knife heads max. 163 mm Maximum profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of the left tool holder, incl. 2 side-mounted, spring-loaded pressure rollers 4th Spindle ----- Isdsvnwbcjpfx Afwea First upper horizontal spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tool cutting circle: 93–200 mm Tool circle for straight knife heads max. 163 mm Maximum profiling depth: 35 mm Axial adjustment: 40 mm Split pressure shoe in front of the upper tool holder, adjustable for tool cutting circle and pivotable away from the tool, spring-loaded. Upper spindle prepared for subsequent cassette system installation 5th Spindle ----- Second upper horizontal spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tool cutting circle: 93–200 mm Tool circle for straight knife heads max. 163 mm Maximum profiling depth: 35 mm Axial adjustment: 40 mm Split pressure shoe in front of the upper tool holder, adjustable for tool cutting circle and pivotable away from the tool, spring-loaded. Upper spindle prepared for subsequent cassette system installation 6th Spindle ----- Second lower horizontal spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tool cutting circle: 93–225 mm Maximum profiling depth: 15 mm Axial adjustment: 40 mm Radial adjustment Minimum tool diameter at table level: 93 mm Maximum tool diameter 6 mm below table level: 225 mm All spindles designed for high concentricity. Lubrication points for axial tool holder adjustment. Feed system ----- Electronic feed, infinitely variable with brake 6–40 m/min, motor 7 kW