Weiler Md 220 pirkti naudotą (182)

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Provisur Weiler 878 mėsmalė, 50 AG modelis. Puikus įrenginys mėsainių, dešrų ar gyvūnų ėdalo gamintojams. Gali malti šviežią arba sušaldytą pjaustytą mėsą. Pratęstas bunkerio talpa. Cgsdpfx Ajx Av Rujf Ton

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speeds: 60 - 3000 rpm, 18 geared steps >> Spindle bore: 23 mm Csdpfx Aeu Aftgsf Tjgn >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse Taper 2 (MT 2) >> Feeds: 0.03 to 0.15 mm/rev >> Available threads: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and equipment: >> 1 piece 160 mm 3-jaw chuck with 1 set of jaws >> 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet attachment with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A quick-change tool post with 3 holders >> Stop >> Change gears About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. The Weiler also runs quietly at high speeds. The Primus was located in a training workshop. This newer generation of Weiler lathes is highly user-friendly and can produce surface finishes comparable to grinding. You are welcome to inspect the machine under power on site to verify its condition.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm Cjdpfx Afjvtp Ede Togn >> Centre distance: 430 mm >> Speed range: 60 - 3,000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Equipment and Accessories: >> 1 pc. 3-jaw chuck 125 mm with 2 sets of jaws >> Collet chuck with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electric spindle guard About the Machine: Offered is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all move very smoothly and evenly. The Weiler also runs quietly at high speeds. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for the production of ground-like surface finishes. Take the opportunity to view this machine under power on-site and see its condition for yourself.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus GS Lead and Feed Screw Lathe with 3-axis Digital Readout Easson-ES8 from Training Workshop – Excellent Condition! Technical Data: - Year of manufacture: approx. 1990, Machine No. 3768 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm, 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose DIN 4 - Tailstock taper: Morse 2 (MK2) - Feeds: 0.03 to 0.15 mm/rev - Capable of cutting metric, imperial, module, and diametral pitch threads - Metric thread pitches from 0.25 to 2.5 mm - Weight: approx. 360 kg - Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Features: - 3-axis digital readout by Easson ES8 - Collet system from 1 to 20 mm, collets increasing by 1 mm increments, with chuck and draw tube - 1 three-jaw chuck with 2 sets of jaws Cgsdpsvkfhpofx Af Ton - 1 four-jaw chuck with 2 sets of jaws - Multifix tool post, size A, with 3 tool holders - Bed stop - Faceplate turning attachment About the Machine: For sale is a Weiler Primus lead and feed screw lathe built approx. 1990, in excellent condition. The machine is, of course, fully functional. The carriage moves very smoothly and evenly. The bed guides are in a very good condition. The lathe runs quietly, even at high speeds. The machine comes from a large company's training workshop. This newer generation of Weiler lathes is very user-friendly and allows for the creation of ground-like surface finishes. Take advantage of the opportunity to inspect the machine on site under power and convince yourself of its condition.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Centre height: 120 mm >> Centre distance: 430 mm Cgedpfx Afevivmyj Ten >> Spindle speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and Equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm in 1 mm steps, new About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All carriages move smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced to a near-ground finish. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor B with Lead and Feed Screw, including 3-axis digital readout by K&C, brand new, CE compliant! Technical Data: – Machine No.: 2442, Year of manufacture: 1997 – Centre height: 165 mm – Centre distance: 750 mm Cedexcuazepfx Af Togn – Spindle speeds: 22 to 2,800 rpm – Spindle bore: 40 mm – Short taper spindle nose DIN 55027 size 5 with bayonet lock – Tailstock taper: MT3 – Feeds: 0.015 to 0.46 mm/rev – Thread types: metric, inch, module, and diametral pitch – Metric thread pitches: 0.18 to 28 mm – Weight: approx. 1,100 kg – Switchable spindle brake – Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Accessories and Equipment: – 3-axis digital readout by K&C, brand new, 12-month manufacturer's warranty, operating manual included. Features: metric/inch conversion, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter switch, quick zeroing, count direction reversal. – 1 × 160 mm 3-jaw chuck, brand new, with 2 sets of jaws – 1 × 200 mm 4-jaw chuck with 1 set of jaws – Collet chuck system, brand new, with brand new collets from 3 to 25 mm in 1 mm increments – Multifix size B with 2 tool holders – Bed stop – Electronic spindle guard – Rear chip guard – Machine mounting feet Safety Features: – Electronic spindle guard – 2 × emergency stop buttons – Change gear cover with limit switch – Spindle brake About the Machine: Offered is a Weiler Condor in excellent condition. The machine is, of course, fully functional. This is a very robust and powerful machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been performed. This later generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine on site under power.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, Weiler Primus VC Precision Centre Lathe with 3-Axis Digital Readout K&C NEW with VC Drive, Infinitely Variable Spindle Speeds and CE Certified, in Very Good Condition Technical Data: >> Year of manufacture: 2003 Machine No.: 646 >> Centre height: 140 mm >> Distance between centres: 500 mm >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm Cgedpfow Idllex Af Tsn >> Weight: approx. 800 kg >> Switchable spindle brake >> Machine dimensions: approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis digital readout K&C NEW >> Collet chuck system with collets from 3 to 26 mm, new, 1 mm increments, NEW >> 160 mm three-jaw chuck with 2 sets of jaws >> Multifix size A quick-change tool post with 2 holders >> Electric chip guard >> Machine feet >> Splash guard About the Machine: Offered is a Weiler Primus VC lead and feed screw lathe, year 2003, in very good original condition. This is a very well maintained lathe with VC drive and infinitely variable speed of the work spindle. The K&C digital readout and linear scales are brand new. This newer generation of Weiler lathes is very user-friendly and enables the production of ground-like surface finishes. The K&C digital readout makes working even easier and more precise. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout from K&C Technical Data: Cgsdpfswrmuxox Af Ton >> Year of manufacture: 1987, Machine No. 87 835 >> Centre height: 165 mm >> Distance between centres: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock taper MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Thread types possible: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake engageable >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Equipment: >> New 3-axis digital readout from K&C, 12-month manufacturer's warranty, with operating manual Functions: mm/inch switching, selectable coordinates ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> 1 new 160 mm 3-jaw chuck, incl. 2 sets of jaws >> 1 160 mm 4-jaw chuck, incl. 1 set of jaws >> Collet chucking device and new collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear panel >> Coolant system >> Machine feet About the Machine: Offered for sale is a used Weiler Condor 81 in very good condition. The machine is, of course, fully operational, and has been completely dismantled and newly painted. A very robust and powerful machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to visit and test this machine live under power at our location.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with New 3-Axis Digital Readout from K&C, Straight from Training Workshop! Technical Data: >> Machine No.: 91-1814 Year of Manufacture: 1991 >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: from 22 to 2800 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027 Size 5 with Bayonet Lock Cgedpew Nw Dqjfx Af Ten >> Tailstock Morse Taper: MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric Thread Pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Switchable Spindle Brake >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> New K&C 3-axis digital readout, 12 months manufacturer’s warranty with user manual Functions: mm/inch switching, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> 1 piece new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck with 1 set of jaws >> Collet chuck, new, and new collets from 2 to 24 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Fixed steady rest >> Machine mounts Safety features: electronic spindle guard, 2 emergency stop switches, change gear cover with limit switch, spindle brake About the machine: For sale is a Weiler Condor in excellent condition. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine under power at our premises.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1983, Funkcionalumas: visiškai funkcionalus, Weiler Center Lathe Model Condor 81 Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C, NEW Technical specifications: >> Year of manufacture: 1983, Machine No. 83-067 >> Center height: 165 mm >> Distance between centers: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake, switchable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and equipment: >> New 3-axis digital readout by K&C, 12-month manufacturer's warranty, with operating manual. Functions: Metric/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming (200 positions), taper calculation, radius/diameter, quick zeroing, counting direction switching >> 1 x 160 mm three-jaw chuck, NEW, with 2 sets of jaws >> Collet chuck, new, and new collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 3 tool holders >> Electronic spindle guard >> Rear splash guard >> Coolant system >> Machine feet About the machine: Cgjdpfxewb Supj Af Ten Offered here is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional. It is a very robust and powerful machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested in our facility. A complete oil change has been carried out. This newer generation of Weiler lathes is highly user-friendly. Take the opportunity to view and test this machine under power on-site.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Technical Data: - Year of manufacture: 1988 - Machine No.: 88-955 - Centre height: 165 mm - Centre distance: 750 mm - Spindle speeds: 22 to 2800 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock: MT 3 - Feeds from 0.015 to 0.46 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitches: 0.18 to 28 mm - Weight: approx. 1,100 kg - Spindle brake can be engaged - Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Features: - 3-axis Heidenhain digital readout - 1 piece new 3-jaw chuck with 2 sets of jaws - Collet chuck with collets from 3 to 30 mm, 40 collets in total, some duplicates Cedpfx Afoxu Hlae Tegn - Multifix quick-change toolpost size B with 3 tool holders - Bed stop - Machine feet - Drill chuck - Live center Safety Equipment: - Lead and feed screw guard - 2 emergency stop switches - Spindle brake About the Machine: For sale is a used Weiler Condor 81 lathe, year 1988, in very good condition. The machine is, of course, fully functional. The lead and feed screws are fitted with protective covers for safety. A very robust and powerful machine. The 3-axis Heidenhain digital readout makes work even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine under power at our premises.

Sąlyga: geras (naudotas), Veda ir traukos varžtinė tekinimo staklės WEILER PRAKTIKANT 800 R - Tekinimo diametras virš lovos: 300 mm - Tekinimo diametras virš skersinio vežimo: 150 mm - Tekinimo ilgis: 800 mm - Veleno skylė: 42 mm - Sukimosi greičio diapazonas: 40 - 2000 aps./min - Automatinis išilginis / skersinis pastūmos - Sriegiai / metriniai / coliniai ir kt. - Galinis centras MK 3 - Trijų žiomenų griebtuvas - Drožlių nugaros sienelė + darbo šviestuvas - Drožlių padėklas - Keičiamos pavaros - Įrankių spinta - Dokumentacija Csdpfx Ajx A Uktjf Tegn Matmenys: I x P x A 1,8 x 0,8 x 1,6 m / Svoris 750 kg Pasilieka teisę daryti klaidas ir įrašų netikslumus.

Sąlyga: geras (naudotas), Leit & Zugspindel tekinimo staklės WEILER CONDOR - Originali dažai - Centrinis aukštis 165 mm - Tekinimo skersmuo virš lovos 330 mm - Tekinimo skersmuo virš supoorto 170 mm - Atstumas tarp centrų 800 mm - Špindelio apsukos 24 - 2800 aps./min - Automatinis išilginis / skersinis pastūmimas - Špindelio skylė 38 mm - Grąžto mova MK 3 - Fiksavimo įtaisas + 17 spaustukų - Trijų žandikaulių griebtuvas - Multifix su kasetėmis - Elektrinė griebtuvo apsauga - Drožlių užtvara - Darbo lemputė - Įvairūs priedai - Dokumentacija Matmenys: Cgsdpfsx A D Ubox Af Ten Ilgis x plotis x aukštis 1,8 x 0,9 x 1,6 m / Svoris 800 kg Galimi netikslumai ir klaidos

Sąlyga: labai geros būklės (naudotas), Swing diameter over bed: 330 mm Centre distance: 750 mm Spindle speeds: 1–4,500 rpm Control: WEILER C3 Cgjdpfx Aoud Naqjf Ton Various accessories MARCELS MASCHINEN CH

Gamybos metai: 1977, Sąlyga: naudotas, Weiler Matador lathe, year of manufacture approx. 1977, three-jaw chuck, Multifix tool post. The machine is in operational condition and can be demonstrated under power by prior arrangement. Cgodpfx Asnkad Sef Tjn

Sąlyga: labai geros būklės (naudotas), Puiki būklė, reguliariai prižiūrėta (yra sąskaitos), daug priedų! Cjdsxw D S Aepfx Af Togn

Sąlyga: geras (naudotas), WEILER Praktikant 800 R / Pagrindinė ir važiavimo sriegio tekinimo staklė iš mokymo įstaigos - Maksimalus tekinimo skersmuo virš lovos: 300 mm - Maksimalus tekinimo skersmuo virš suporto: 150 mm - Tekinimo ilgis: 800 mm - Veleno skylė: 42 mm - Sukimosi greičio diapazonas: 40-2000 aps./min. - Automatiniai išilginis ir skersinis padavimai - Sriegių pjovimas / metriniai / coliniai sriegiai - Griebtuvas: MK 3 - Variklio galingumas: 3 kW - Multifix laikiklis su intarpais Csdpjxyqxnefx Af Togn - Greito keitimo griebtuvas su įtrauktais spaustuvais - Griebtuvo apsauga - Drožlių apsauginė pertvara su darbo lempa - Avarinis stabdis (Stop) - Keičiami krumpliaračiai - Sukamasis centras + griebtuvas - Įrankių spinta - Dokumentacija Matmenys: Ilgis x plotis x aukštis: 1,8 x 0,8 x 1,6 m / Svoris: 750 kg Galimi netikslumai ar įvesties klaidos

Sąlyga: geras (naudotas), Gamybos metai: 2001, Tekinimo staklės – ciklinio valdymo Gamintojas: WEILER Staklių modelis: E 35 Valdymas: Siemens / Weiler D2 Pagaminimo metai: 2001 TECHNINIAI DUOMENYS Atstumas tarp centrų (mm): 950 Centrų aukštis (mm): 200 Maks. tekinimo skersmuo virš skersinio slankiklio (mm): 200 Maks. tekinimo skersmuo virš lovos (mm): 410 Velenas - Maks. apsukos (aps./min): 3 000 Galinis atraminis taškas - Vidinis kūgis: MK 4 Maitinimo galia (kW): 10 MATMENYS IR SVORIS Ilgis x plotis x aukštis (mm): 2 300 x 1 400 x 1 700 Svoris apie (kg): 2 100 Techniniai duomenys ir informacija gali būti keičiami ar joje gali būti klaidų. Csdpfxoxl Ulps Af Tjgn

Sąlyga: labai geros būklės (naudotas), veleno skylė: 38 mm, tekinimo skersmuo virš slankiojančio stalo: 340 mm, tekinimo skersmuo virš viršutinio vežimo: 200 mm, tekėjimo ilgis: 750 mm, bendras ilgis: 1 700 mm, bendras plotis: 650 mm, bendras aukštis: 1 500 mm, veleno greitis (maks.): 2 800 aps./min, veleno greitis (min.): 12 aps./min, bendras svoris: 800 kg, Equipped with: – Tailstock – Multifix tool post Cjdpfx Aewxq Icof Tegn – Röhm three-jaw chuck (Ø 160 mm)

Sąlyga: geras (naudotas), veleno skylė: 28 mm, tekinimo skersmuo virš slankiojančio stalo: 300 mm, tekinimo skersmuo virš viršutinio vežimo: 200 mm, tekėjimo ilgis: 500 mm, bendras ilgis: 1 400 mm, bendras plotis: 700 mm, bendras aukštis: 1 600 mm, bendras svoris: 800 kg, Equipped with: Cgjdpfjwxq Iijx Af Ten – Multifix tool post – Four-jaw chuck (Ø 130 mm) – Digital readout by HEIDENHAIN

Sąlyga: geras (naudotas), Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 10279, sukimosi skersmuo virš skersinio stumduko: 200 mm, veleno skylė: 35 mm, tekėjimo skersmuo: 300 mm, centro aukštis: 150 mm, tekėjimo ilgis: 750 mm, bendras ilgis: 1 860 mm, bendras plotis: 700 mm, bendras aukštis: 1 800 mm, veleno greitis (maks.): 2 800 aps./min, veleno greitis (min.): 40 aps./min, bendras svoris: 1 030 kg, - Operating voltage: 380 V Csdpfx Afov Irgts Togn - Connected load: 3 kW - Rated current: 25 A - Frequency: 50 Hz Equipment: - Tailstock - Multifix Type B toolpost - Three-jaw chuck (diameter: 160 mm) - 2-axis digital readout by RSF

Sąlyga: geras (naudotas), Centre distance: 800 mm Spindle bore: 38 mm Cgjdpsukrtnsfx Af Tsn Centre height: 165 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 170 mm Spindle speed: 24-2800 rpm Dimensions: 1600 mm x 600 mm x 1250 mm Weight: 850 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Weiler Primus VC Präzisions-Drehmaschine Baujahr: 2011 Codpfsw Ebdbsx Af Tegn Technische Daten Drehdurchmesser: 250 mm Drehlänge: 500 mm Spitzenhöhe: 140 mm Umlaufdurchmesser über Planschlitten: 280 mm Max. Umlaufdurchmesser über Querschlitten: 150 mm Hauptspindel: Drehzahlbereich – Hauptspindel: 30 – 4.000 min⁻¹ Leistung: 4,0 kW Anzahl der Gangstufen: 1 Spindelaufnahme: Größe 5 / DIN 55027 Spindeldurchmesser im vorderen Lager: 70 mm Spindelbohrung: 40 mm Durchlass (Stangendurchlass): 40 mm Werkzeughalter: System: MultiFix B Werkzeugquerschnitt: 20 x 20 mm Reitstock: Pinolenhub: 85 mm Pinolendurchmesser: 40 mm Reitstockkegel: MK 3 Vorschübe: Anzahl der Vorschübe: 24 Längsvorschub: 0,02 – 0,63 mm/U Quervorschub: 0,006 – 0,2 mm/U Gewindeschneiden: Metrisch: 0,25 – 8 mm Zoll: 80 – 2 1/” Verfahrwege: X-Achse (Querschlittenverstellung): 150 mm Z-Achse über Querschlitten: 500 mm Z-Achse über Oberschlitten: 110 mm Gesamtanschlusswert: 15 kVA Maschinengewicht: ca. 800 kg Platzbedarf: 1400 x 935 x 1550 mm Zubehör/Optionen: - Dokumentation - 3-Backenfutter Ø 160 mm, mit Backen - 4-Backenfutter Ø 160 mm, mit Backen - Spannzangenfutter inkl. Spannzangen - Reitstock - Multifix-Werkzeughalter, mit Haltern - Mitlaufende Lünette - Wechselräder - Verschiedenes Werkzeug - Lista Werkzeugschrank - Ersatzteile - usw. Unter Strom in unserem Lager.

Sąlyga: naudotas, Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, Weiler / Contec (licencinė gamyba) Matador tekinimo staklės, pagaminimo metai 1993, su 3 ašių Elesta skaitmenine indikacija, keturių žandikaulių griebtuvu, Multifix, galiniu purškimo apsauginiu, elektrine griebtuvo apsauga. Staklės geros, paruoštos naudoti būklės, pagal susitarimą galima parodyti veikiančias. Cgodoxp Rvlepfx Af Ten

Sąlyga: naudotas, Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, Weiler / Contec (licencinė gamyba) Matador tekinimo staklės, pagaminimo metai 1993, su 3 ašių Elesta skaitmenine indikacija, keturių žandikaulių griebtuvu, Multifix, galiniu purškimo apsauginiu, elektrine griebtuvo apsauga. Staklės geros, paruoštos naudoti būklės, pagal susitarimą galima parodyti veikiančias. Cgjdpfx Aexp Ru Uof Tsn