Weiler Ergodor pirkti naudotą (204)

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor B, Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C (NEW) Geometrically overhauled with acceptance protocol for new machine tolerances! Technical Data: - Machine No. 90-1495 - Centre height: 165 mm - Centre distance: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock Morse taper 3 - Feed rates from 0.015 to 0.46 mm/rev - Possible threads: Metric, Imperial, Module and Diametral Pitch - Metric thread pitches from 0.18 to 28 mm - Weight approx. 1100 kg - Spindle brake engageable Kdedpfevambcsx Acuju - Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: - 3-axis digital readout by K&C, new, with 12 months manufacturer warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving function, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal, - Collet chuck system, NEW collets from 3 to 26 mm in 1 mm increments - 160 mm 3-jaw chuck with two sets of jaws, NEW - Multifix quick change toolpost, size A, with 2 new tool holders - Bed stop - Electric chuck guard, NEW - LED machine lamp, NEW - Rear splash guard - Operating manual - Coolant system - Machine feet About the machine: Offered is a Weiler Condor B lead and feed screw lathe, geometrically overhauled and in as-new condition. The guideways have been reground or newly hand-scraped. Supplied with a certified inspection protocol. A very attractive machine with electronic spindle protection. The accessories — collets, chuck, and Multifix — are new. Spindles, nuts, bearings, belts, and wipers have been renewed. You are welcome to inspect this machine under power at our premises and see its condition for yourself.

Sąlyga: naudotas, Gamybos metai: 1982, Swing diameter over bed: 297 mm Swing diameter over cross slide: 160 mm Turning length: 500 mm Distance between centers: 500 mm Spindle speed: 15 - 3550 rpm Spindle nose size: No. 5 (DIN 55022) Spindle bore: 36 mm Tailstock quill taper: MT 3 Tailstock quill stroke: 90 mm Tailstock traverse: 500 mm Motor speed: 1440 / 2830 rpm Motor power: 3 / 2.2 kW Weight: 0.8 t Space requirement approx.: 1.40 x 0.70 x 1.20 m Kdodpfx Acovxwlpsueu Chuck guard with electrical interlock Tool cabinet with various contents

Sąlyga: naudotas, Technical Data: Centre distance approx. 500 mm Centre height over bed 125 mm 16 spindle speeds ranging from 125 – 2800 rpm Kdjdpfx Acswrahxoueu Space requirement, length x width 1.2 x 0.6 m Estimated weight approx. 450 kg Scope of delivery: Hand-lever quick-clamping device Electrical sensing to detect whether the workpiece clamping lever is in the open or clamped position 1 set of collets from 3.0 – 25.0 mm, in 1 mm increments Cross slide with two tool holders Turret head with 6 tool stations

Sąlyga: naudotas, Gamybos metai: 1980, Weiler Condor VS2 lathe with 3-axis Heidenhain digital readout, year of manufacture 1980, four-jaw chuck, Multifix quick-change toolpost with 3 holders. The machine is in very good, ready-to-use condition and comes from a training workshop. Can be demonstrated under power by prior arrangement. Kdodpfx Ajvx Sw Hocueu

Sąlyga: naudotas, Swing diameter over bed / mm Swing diameter over cross slide / mm Kdjdpjwgi Tmsfx Acusu Turning length / mm

Sąlyga: geras (naudotas), Centre distance: 800 mm Kdedpsukrtnofx Acuou Spindle bore: 38 mm Centre height: 165 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 170 mm Spindle speed: 24-2800 rpm Dimensions: 1600 mm x 600 mm x 1250 mm Weight: 850 kg

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus Lead and Feed Screw Lathe with 2-Axis Heidenhain Digital Readout from Training Workshop!!! Technical Specifications: >> Year of manufacture: approx. 1985 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread types: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Kdsdou Afqlopfx Acusu Included Accessories and Features: >> 2-axis digital readout by Heidenhain >> 1 new 125 mm three-jaw chuck with 2 sets of jaws >> New collet chuck with new collets ranging from 3 mm to 25 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Rear splash guard About this Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. Naturally, the machine is fully operational. All slides move very smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. This Primus was used in a training workshop. This newer generation of Weiler lathes is highly user-friendly and can achieve ground-like surface finishes. Take the opportunity to view the machine under power on-site and convince yourself of its condition.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Turning diameter: 330 mm Turning length: 750 mm Control unit: WEILER D 1 Centre height: 165 mm Distance between centres: 750 mm Max. swing over cross slide: 160 mm Spindle bore: 42 mm Spindle speeds: 1 - 4500 rpm Spindle head: DIN 55027 size 5 Kjdpfxowi Ugqj Acusdu Cross slide travel: 180 mm Feeds X-axis: mm/rev Feeds Z-axis: mm/rev Rapid traverse X-axis: 5 m/min Rapid traverse Z-axis: 10 m/min Feed force X/Z-axis: 3000 / 6000 N Tailstock quill taper: MK 3 Tailstock quill diameter: 50 mm Tailstock quill stroke: 110 mm Total power requirement: 10 kW Machine weight approx.: 1.3 t Machine dimensions (L x W x H): 1.8 x 1.2 x 1.7 m Accessories: 3-jaw chuck SCHUNK 0 mmø, quick-change toolpost, coolant system

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1989, Universal lead and feed screw lathe Brand: WEILER Model: Condor B Kodpfx Acsg R S Rcjuodu Year of manufacture: 1989 - overhauled newly painted RAL 7035 light grey Machine No.: 1401 with warranty Accessories: - 3-axis digital readout FAGOR Innova 30i T, new - Chuck guard with electric interlock, new - Size B quick-change toolpost base - Bed stop - Coolant system - Chip guard/rear panel - Operating manual - used, as seen -

Sąlyga: naudotas, Gamybos metai: 1997, - 4-jaw faceplate Ø 550 mm - 3-jaw chuck Ø 310 mm incl. 4 sets of hard master jaws, 1 set of hard top jaws, 8 sets of soft top jaws - Fixed steady rest Kodpfxsr Hrq De Acusdu - Live center MK5 - Multifix B quick-change tool post incl. 10 tool holders - Operating hours: 32,582 h - Year of manufacture: 1997 - Incl. operating manual and technical documentation Technical Data: Working Area: - Distance between centers: 1000 mm - Center height: 280 mm - Swing over bed: 570 mm - Swing over cross slide: 340 mm - Bed width: 350 mm - Cross slide travel: 340 mm - Compound slide travel: 140 mm - Cross slide length: 700 mm - Cross slide width: 220 mm - Bed saddle guideway length: 560 mm - Turning tool cross-section (H x W): 32 x 25 mm Spindle: - Spindle nose according to DIN 55027: Gr 8 - Spindle diameter at front bearing: 100 mm - Spindle bore: 66 mm - Main spindle internal taper: metric 70 Main Drive: - Drive power 60% / 100% duty cycle: 15 / 11 kW - Max. torque at spindle: 1600 Nm - Total speed range: 1 - 2500 rpm - Gear range I: 1 - 625 rpm - Gear range II: 4 - 2500 rpm Feed Drive: - Type: three-phase servo drives - Feed range longitudinal and cross: 0 - 10 mm/rev - Longitudinal feed force: 9000 N - Cross feed force: 7000 N - Rapid traverse longitudinal/cross: 7 / 3.5 m/min Tailstock: - Quill diameter: 70 mm - Quill stroke: 160 mm - Quill taper: MK5 Thread Cutting Range: - Metric threads: 0.1 - 250 mm - Inch threads: 1/4 - 56 TPI (G/1") - Module threads: 0.125 - 28 - DP threads: 1 - 224 Machine Dimensions: - Dimensions (W x H x D): 2850 x 1750 x 1815 mm - Machine weight: 2950 kg

Sąlyga: naudotas, Gamybos metai: 1986, Swing over bed: 320 mm Swing over cross slide: 198 mm Turning length: 650 mm Total power requirement: 2.2 kW Machine weight approx.: 650 kg Space requirement approx.: 1700x1000x1700 mm Kodpfxjufud Ds Acusdu Digital readout: 3-axis digital display Bar capacity: Ø 40 mm Spindle speed range: 96 - 2500 rpm Spindle nose: A 2 - 5 Feed range: 0.007 - 0.63 mm/rev Thread cutting capability: Metric 0.25 - 8 mm, Inch 80 - 2 TPI, Diametral Pitch threads 200 - 5 DP, Module 0.2 - 4 Tailstock: MT 3 3-jaw chuck: 160 mm Multifix quick-change toolpost: Type B

Sąlyga: geras (naudotas), Gamybos metai: 1988, Weiler lathe Kdjdovgmbvepfx Acuou Model Condor B 2-axis digital readout Centre height: 165 mm Centre distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 185 mm Spindle bore: 40 mm Connected load: 3 kW Speed range: 22–2800 rpm Tailstock: Morse taper 3 Coolant pump (not connected) Work lamp Automatic longitudinal and cross feed Spindle brake - Hinged chuck guard - Splash guard Weight approx. 1040 kg 3-jaw chuck Multifix B quick-change toolpost Live centre

Sąlyga: geras (naudotas), Gamybos metai: 2014, gręžimo pajėgumas: 60 mm, veleno tvirtinimas: MK 5, Manufacturer: WEILER MAS Model: VOM 50 Year of Manufacture: 2014 Specifications Metric US Standard Arm Length: 1250 mm Max. Drilling Diameter in Steel: 50 mm Max. Tapping Diameter: M48 Quill Stroke: 350 mm Max. Distance Spindle to Table: 1555 mm Min. Distance Spindle to Table: 305 mm Spindle Speed: 800 rpm Tool Mount: ISO 5 / BT / MK Column Diameter: 400 mm Dimensions (Estimated) Length: 3200 mm Width: 1325 mm Ksdpfewpkr Nex Acuedu Height: 2970 mm Weight: 6750 kg Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contract terms. We recommend verifying all important details.

Sąlyga: geras (naudotas), Lead and Feed Screw Lathe Weiler Condor VS 2 Technical Data: Center Height: 160 mm Distance Between Centers: 800 mm Spindle Bore: 40 mm Bed Width: 240 mm Ksdpfx Aou E H Iwecuedu Spindle Speeds: 12 - 2800 rpm Drive Power: 3 kW Tailstock Taper: MK 3 Quill Travel: 110 mm Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (LxWxH), approx.: 1930 x 880 x 1470 mm Equipment: 3-jaw chuck Quick-change tool post system Multifix size A incl. 1 tool holder Electrically interlocked chuck guard Retrofitted brake motor Bed stop Emergency stop push button Coolant system Machine lamp Chip guard at rear ELESTA 3-axis digital readout Live center The machine has been technically inspected and is in very good condition. Backlash cross slide: 0.2 mm Backlash compound slide: 0.15 mm Inspection under power possible at any time. Price net ex works, loaded from stock

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2007, Universal lead and feed screw lathe Manufacturer: WEILER Model: Primus VC Year of manufacture: 2007 – overhauled Newly painted RAL 7035 light grey Machine no.: CK17 Centre height: 140 mm Centre distance: 500 mm Spindle bore: 40 mm With warranty Geometric inspection with test protocol Kodpsv D Ip Nefx Acuodu Accessories: - 3-axis digital readout SIEMENS - Chuck guard with electrical interlock - Motor with brake - Quick change tool post base size A - Bed stop - Covered lead and feed screw - Chip backsplash - Removable chip tray - Operating manual - Used, as seen -

Gamybos metai: 2010, Sąlyga: beveik kaip naujas (naudotas), We offer the following accessories for the Weiler E30 lathe: 1 piece Schunk faceplate, 250 mm – Price: €600 Spindle mount DIN 55027, size 5 2 pieces Röhm faceplate, 260 mm – Price per item: €650 Spindle mount DIN 55027, size 5 Kdodegabvnopfx Acusu 1 piece steady rest – Price: €450 2 pieces drive flanges – Price per item: €210 Spindle mount DIN 55027, size 5 All items are in very good condition.

Sąlyga: geras (naudotas), Gamybos metai: 1996, Weiler Lathe Model Condor B Centre height: 165 mm Centre distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 185 mm Spindle nose: DIN 55027 Size 5 Spindle bore: 40 mm Kdjdpfsvbwd Rex Acueu Spindle taper: Morse taper 5 Connected load: 3 kW Spindle speed: 22–2800 rpm Tailstock taper: MT 3 Weight: 1040 kg 3-jaw chuck 4-jaw chuck Multifix B quick-change tool post Live centre

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1986, Funkcionalumas: visiškai funkcionalus, Leadscrew and feed rod lathe Weiler Condor 81 *Partially Refurbished* Article number: 04-03-141 Manufacturer: Weiler Excellent overall condition Machine partially refurbished Delivery time: on request – subject to prior sale Kdsdpfx Ajwl At Docusu Year of manufacture: approx. 1986 L x W x H: approx. 2000 x 1000 x 1700 mm Weight: approx. 900 kg Digital display: 3-axis SINO digital readout *New* Specifications: Max. turning diameter over bed: approx. Ø340 mm Max. turning diameter over cross slide: approx. Ø185 mm Max. turning length: approx. 800 mm Bar capacity: approx. Ø42 mm Spindle: Speed range: approx. 30-2800 rpm Spindle nose: A 2-5 Drive power: approx. 3.0 kW Automatic longitudinal and face feed: Feed range: approx. 0.016–0.50 mm/rev Suitable for threads: Metric: 0.18–28 mm Inch: 80–1 tpi Diametral pitch: 200–2 3/4 DP Module: 0.1–9 Tailstock: MT3 Accessories: 3-axis SINO digital readout *New* 3-jaw chuck 160 mm *New* Quick-change tool post size E + 1 tool holder Bed stop Work lamp *New* Coolant system *New* Complete documentation Emergency stop Various chuck keys Machine feet Electrical chuck guard *New* Leadscrew and feed rod cover *New* Drill chuck *Optional* Live center *Optional* Further quick-change tool holders *Optional* Further accessories on request Price and additional technical data on request

Sąlyga: naujas, Praktikant VC plus The new standard in conventional precision lathes. High-quality, energy-efficient, precise, and universally applicable for production, training, and further education. This machine impresses with: future-oriented technology maximum accuracy durability user-friendly ergonomics minimal footprint and a wide range of accessories. The consistent and innovative further development of the proven Praktikant series offers an economical and intelligent solution for your daily applications. Technical data: WORKING AREA Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Distance between centres: 650 mm SPINDLE Spindle nose DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 43 mm Front bearing spindle diameter: 70 mm MAIN DRIVE Drive power 60%/100% duty cycle: – / 8 kW Speed range: 25 – 5,000 rpm Number of speeds: infinitely variable FEED RANGE Number: infinitely variable Longitudinal: 0.01 – 6 mm/rev Cross: 0.003 – 2 mm/rev THREADING RANGE Metric threads: 0.1 – 20 mm TAILSTOCK Quill diameter: 40 mm Quill stroke: 85 mm Morse taper DIN 228: MT 3 ACCEPTANCE ACCURACY: DIN 8605 Equipped with WEILER screen display WTS 15 VC plus - Large, clear 15" touchscreen, pivoting and swiveling, resolution 1366 x 768 Kdedpfx Ashw N Ntscuou - Change operating masks via swipe gestures - Operating functions accessible via app manager - Control panels can be freely configured, positioned, and scaled - Drawings/sketches can be imported from PDF files via USB interface and individually zoomed - Video-assisted machine maintenance - Context-sensitive help menu (instead of WEILER VC plus screen display) - Coolant unit, 18 litres, incl. coolant pump The machine is located in our showroom at 71334 Waiblingen-Beinstein and is available immediately. For detailed information about equipment and configuration, please contact us.

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Centre distance: 650 mm Centre height: 160 mm Spindle bore: 40 mm Speed range: 48 – 2,500 rpm Tailstock: MT 3 Drive power: 2.4 / 3 kW Weight: 680 kg Kdodpfx Acewc Sh Ejuou Dimensions: 1,600 x 750 x 1,290 mm Paint finish: RAL 6011 (reseda green) Digital readout: 3-axis Fagor Accessories: Further accessories available on request! We are also pleased to offer this machine fully reconditioned!

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1990, Universal lead- and feed-screw lathe Manufacturer: WEILER Model: Praktikant 160 B Year of manufacture: 1990 – overhauled Newly painted RAL 7035 light grey Machine no.: 90-160-2054 Center height: 160 mm Distance between centers: 650 mm Geometric acceptance with test protocol Kdodpfx Aohy Tdyscueu Accessories: - 3-axis digital readout FAGOR Innova 30i T - Covered lead and feed screw - Braked drive motor - Coolant system - Electrically interlocked chuck guard - Size A quick-change toolholder - Simple bed stop - Chip guard rear wall - Operating instructions With warranty Used, as seen The machine is technically at the level of its year of manufacture.

Sąlyga: geras (naudotas), Gamybos metai: 1998, Swing diameter over bed: 535 mm Swing diameter over cross slide: 345 mm Turning length: 1500 mm Kdsdpfx Aewuz Rmecueu Centre height: 260 mm Swing diameter in gap: 560 mm Bed width: 330 mm Cross slide travel: 330 mm Top slide travel: 120 mm Spindle bore: 71 mm Spindle mount: DIN 55027, size 6 Speeds: 12 steps, 44–2000 rpm Longitudinal feeds: 0.072–4 mm/rev Cross feeds: 0.036–2 mm/rev Tailstock quill taper: MK 5 Tailstock quill stroke: 120 mm Metric threads: 0.5–28 mm Inch threads: 56–1" Max. workpiece weight – between centres: 800 kg Max. workpiece weight – overhang: 200 kg Connected load: 11.5 kW Total power requirement: 7.5 kW Machine weight approx.: 1.5 t Space requirement approx.: 2.25 x 1.25 x 1.45 m

Sąlyga: naudotas, Gamybos metai: 1970, Weiler lathe with tailstock Kdedpfxshtnu To Acusu

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Distance between centers: 450 mm Center height: 120 mm Spindle bore: 23 mm Kdjdpfjwcxf Dox Acueu Speed range: 30 – 3000 rpm Tailstock: Morse Taper 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paintwork: Reseda green RAL 6011 Digital readout: Optional at extra charge Accessories: Additional accessories available on request We are pleased to offer this machine fully refurbished if desired!

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1974, Universal lead and feed screw lathe Brand: WEILER Model: Commodor Year of manufacture: 1974 – overhauled newly painted RAL 7035 light grey Machine no.: 0068 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: 56 mm with warranty Geometric acceptance with inspection protocol Kjdpfx Aemgaddscujdu Accessories: - 3-axis digital readout FAGOR Innova 30i-T, new - Chuck guard with electrical interlock - Quick-change tool post size B - Simple bed stop - Coolant system - Operating manual - used, as seen -