Tekinimo staklės-įprastos-elektroninės

WEILER MATADOR VS 2

Būklė: paruoštas naudoti (naudotas), WEILER Matador VS 2, įskaitant naująjį trijų ašių skaitmeninį indikatorių, iš mokyklos. - Maksimalus aukštis 140 mm - Maksimalus atstumas tarp centrų 500 mm - Veleno greitis 15–3550 aps./min. - Automatinis išilginis ir skersinis poslinkis - Sriegiai / metriniai / coliniai ir kt. - Naujas trijų ašių skaitmeninis indikatorius - Elektrinis apsauginis dangtis - Darbinė lemputė - „Multifix“ pagrindinis laikiklis su įdėklais - Aušinimo skysčio sistema - Trijų žandų griebtuvas / kūginis griebtuvas - Centravimo įtaisas MK 3 - Įvairūs įrankiai - Dokumentacija Matmenys: ilgis x plotis x aukštis 1,5 x 0,6 x 1,5 metro / svoris 680 kg Fsdpezr Rnysfx Aaiegf Pasilieka teisė į klaidas / įvesties klaidas.

Gamybos metai: 1995, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 044092, Offer 22148 Technical specifications: Fedpfsiba R Nox Aaiogf - Grinding wheel diameter: approx. 200 mm - Grinding wheel width: approx. 25 mm - Grinding wheel bore: approx. 51 mm - Wheel speed: 1450 rpm - Drive: 400 V / 0.7 kW - Space requirement: approx. W 600 x H 400 x D 350 mm - Weight: approx. 30 kg - Bracket for wall mounting

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Matador VS-2 Lead and Feed Screw Lathe with Heidenhain ND 780 3-Axis Digital Readout from Training Workshop!! Technical Data: >> Machine No. 7702, Year of manufacture: approx. 1990 >> Centre height: 140 mm >> Distance between centres: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm Fodpfx Aaoy T Hqceiogf >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper: MK 3 >> Feeds: 0.012 to 0.9 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch threads possible >> Metric thread pitches: 0.25 to 12 mm >> Brake motor >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout Heidenhain ND 780 >> Quick clamping device, internal and external collets (see photo) >> 1 pc 3-jaw chuck, 3 sets of jaws >> Multifix size A with 3 tool holders >> Spindle guard >> 1 pc bed stop >> Change gears >> Machine feet About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides run smoothly and evenly. Even at high spindle speeds, the Weiler operates quietly. The lathe was originally located in a training workshop. The machine comes with a comprehensive range of accessories. Take the opportunity to inspect the machine under power on site and convince yourself of its excellent condition.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1988, Funkcionalumas: visiškai funkcionalus, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout from Elesta, ex-training workshop! Technical Data: - Machine No.: 88-8115, Year of manufacture: 1988 - Centre height: 140 mm - Distance between centres: 500 mm - Spindle speed: 15 – 3550 rpm - Spindle bore: 36 mm - Short taper spindle nose DIN 55022-5 with bayonet lock - Tailstock: MT 3 - Feeds: 0.012 to 0.9 mm/rev - Thread types possible: Metric, Inch, Module, and Diametral Pitch - Metric thread pitches: 0.25 to 12 mm - Brake motor - Weight approx. 700 kg - Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Features: - 3-axis Elesta digital readout - Rapid clamping device for internal and external collets (see photo) Fjdpsy Tmkvsfx Aaiegf - 1 set 3-jaw chuck with a set of jaws - Multifix size A with 3 tool holders - Spindle guard - 1 bed stop - Change gears - Travelling steady rest - Machine feet About the Machine: We are offering a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. The slides all run smoothly and evenly. Even at high speeds, the Weiler runs quietly. The machine was originally located in a training workshop. It comes with extensive accessories. Take the opportunity to inspect this machine under power on-site and see for yourself its excellent condition.

Būklė: naudotas, Turning length 500 mm Turning diameter over bed 297 mm Turning diameter over cross slide 160 mm Spindle bore 36.0 mm Mounting DIN 55022 Size 5 Quill: 3 MT Quill stroke 90.0 mm Speed range 30 - 3550 rpm Motor speeds: 1410 / 2830 rpm Total power requirement 3.3 kW Voltage 380 V Machine weight approx. 620 kg Dimensions L-W-H 1420 x 700 x 1200 mm From a vocational school – very good condition (!!) Regularly serviced by WEILER factory service Especially suitable for medium-sized precision turning parts Equipment: - Robust leadscrew/feedshaft lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - Collet chuck with numerous collets - Foldable chuck guard - Chuck key - MULTIFIX tool post A, with 3x new tool holders - Movable tailstock - Adjustable bed stop - Control panel, front left - Automatic feeds for cross and top slide - Pole-changeable drive motor Fgodpfx Aajxacirsiof - Machine base with cabinet door (storage space) - Chip splash guard (rear wall) - Emergency stop button, lower right - Machine leveling feet - Original operating manual

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Weiler Matador VS-2 Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout from K&C in Special Light Grey Paint Finish!!! Technical Data: >> Machine No.: 92-027, Year of Manufacture: 1992 Fgjdpfx Asyylq Ujaief >> Centre Height: 140 mm >> Centre Distance: 500 mm >> Spindle Speed: 15 – 3,550 rpm >> Spindle Bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock >> Tailstock Morse Taper 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread cutting possible: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout from K&C (new), includes 12-month manufacturer's warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming (200 entries), taper calculation, radius/diameter display, quick zeroing, counting direction switching >> 1 x 3-jaw chuck, 1 set of jaws >> 1 x 4-jaw chuck, 1 set of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the Machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very nice machine. The 3-axis digital readout from K&C has been retrofitted. All scales are new and equipped with protective covers to guard against dirt. All slides run smoothly and evenly. Take the opportunity to view this machine under power on site and see its condition for yourself.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C, NEW, in special light gray paint! Fjdpfx Asyylqhoaiegf Technical Data: >> Machine No. 92-029, Year of Manufacture: 1992 >> Center Height: 140 mm >> Distance Between Centers: 500 mm >> Spindle Speed: 15 – 3550 rpm >> Spindle Bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with Bayonet Lock >> Tailstock MT 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible Threads: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 12 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, with 12-month manufacturer’s warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter, quick reset to zero, counting direction switching >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 2 sets of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the Machine: For sale is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly repainted in light gray. A very attractive machine. The 3-axis digital readout from K&C was retrofitted. All the scales are new and have been equipped with protective covers to prevent contamination. All slides move smoothly and evenly. Take the opportunity to inspect the machine under power on site and convince yourself of its condition.

Būklė: naudotas, TECHNICAL DATA - Table dimensions: 350 x 800 [mm] - T-slots: 7 - Travels, x, y, z: 400, 400, 370 [mm] Fodeuhbxaopfx Aaiegf - Spindle speed: 50 - 2240 [rpm] - Rapid traverse speed with potentiometer: 0 - 630 [mm/min] ACCESSORIES - 3-axis display HEIDENHAIN - Splash guard

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Weiler Matador VS-2 Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout by K&C, Special Light Grey Paint Finish!!! Technical Data: >> Machine No. 92-028 Year of Manufacture: 1992 >> Centre Height: 140 mm >> Centre Distance: 500 mm >> Spindle Speed: 15 – 3550 rpm >> Spindle Bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with Bayonet Lock >> Tailstock Taper: MK 3 >> Feeds: 0.012 to 0.9 mm/rev >> Thread Cutting Capability: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitch: 0.25 to 12 mm >> Weight: approx. 700 kg >> Dimensions (L x H x D): 1.4 m x 1.2 m x 0.55 m Accessories and Features: >> 3-axis digital readout by K&C - brand new, 12 months manufacturer's warranty, with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for up to 200 positions, taper calculation, radius/diameter display, quick zeroing, counting direction reversal >> 1 x 3-jaw chuck with 1 set of jaws >> 1 x 4-jaw chuck with 1 set of jaws >> Electronic spindle protection >> Multifix size A toolpost with 2 tool holders Fgjdeyyb T Sspfx Aaief >> Motor brake >> Bed stop About the machine: For sale is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly repainted in light grey. A truly attractive machine. The K&C 3-axis digital readout has been retrofitted. All scales are new and come with protective covers to guard against dirt. The slides run smoothly and uniformly. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

Būklė: naudotas, Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Weiler Matador VS2 tekinimo staklė, pagaminta 1992 m., trijų žandikaulių griebtuvas, Multifix, galinis apsauginis skydas nuo drožlių, elektrinė griebtuvo apsauga. Staklės geros, paruoštos naudoti būklės, po susitarimo galima parodyti veikiant. Fgjdpox Sqvgjfx Aaief

Būklė: naudotas, Gamybos metai: 2006, X eiga 880 mm Y eiga 630 mm Fsdpeyackdsfx Aaijgf Z eiga 630 mm Valdymas iTNC 530 Heidenhain Pagrindinio veleno sūkių diapazonas maks. 18.000 aps./min Pagrindinio veleno pavara 28 / 19 kW Maks. sukimo momentas 121 Nm Įrankio tvirtinimas HSK-A 63 Pasukama B: +30° / -120° Stalo tvirtinimo paviršius Ø 700 / 1.250 x 700 mm Maks. stalo apkrova 650 kg Sukama C: 360° Įrankių vietų skaičius 2x16 poz. Įrankio tvirtinimas HSK-A 63 Maks. įrankio skersmuo 80 mm Maks. įrankio skersmuo su laisva kaimynine vieta 130 mm Maks. įrankio svoris 8,0 kg Maks. įrankio ilgis 315 mm Maks. padavimo greitis 30.000 mm/min Greitoji eiga 30 m/min Bendras galios poreikis 48 kVA Staklių svoris apie 14,0 t Užimamas plotas apie 4,5 x 4,0 x 2,6 m 5 ašių CNC universalus apdirbimo centras DECKEL MAHO - DMU 80 monoBLOCK - NC sukamasis stalas (C ašis) integruotas į fiksuotą stalą - Sukiojama frezavimo galva (B ašis)