Wa Avarinio Maitinimo Technologija Gmbh pirkti naudotą (78 933)

Gamybos metai: 2025, Sąlyga: beveik kaip naujas (parodų įrenginys), Universal Testing Machine PM10 Force: 10 kN Crosshead Travel: 700 mm Test Space: 400 mm Total Height: 1230 mm Weight: approx. 85 kg Displacement Resolution: 0.01 mm Test Speed: 1–500 mm/min Return Speed: 700 mm/min Load Cell: 10 kN incl. Evaluation Electronics and Basic Software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for quick tests without the need for a PC. For tests requiring data storage and recording of the test curve, our basic software provides control and evaluation capabilities. This enables you to generate various test sequences and create a test protocol. Additionally, you can further process raw data with your own programs. Optional: Nodpfod R Dpmex Af Iecl - Delivery & commissioning - DAkkS or factory calibration in accordance with DIN EN ISO 7500-1 - Grips & Fixtures: Compression plates, bending devices, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips and hydraulic grips.

Gamybos metai: 2024, Sąlyga: beveik kaip naujas (parodų įrenginys), Universal Testing Machine PM5 Force: 5 kN Crosshead travel: 520 mm Working depth: 66 mm Overall height: 1036 mm Weight: approx. 48 kg Travel resolution: 0.01 mm Test speed: 1–500 mm/min Return speed: 700 mm/min Load cell: 5 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for “quick testing” without the need for a PC. For tests requiring data storage and curve recording, the included basic software provides control and evaluation capabilities. This enables the generation of various test sequences and the creation of test reports. You also have the option to further process raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Ncsdpfjd R Dqbex Af Iel Compression plates, bending devices, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Universal Testing Machine PM3 Force: 3 kN Crosshead Travel: 520 mm Test space depth: 66 mm Overall height: 1036 mm Weight: approx. 40 kg Travel resolution: 0.01 mm Test speed: 1–500 mm/min Return speed: 700 mm/min Load cell: 3 kN Incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for quick tests even without a PC. For tests that require data storage and curve recording, our basic software provides the option for control and evaluation. Nsdpfxefdzupe Af Iecl This enables the creation of various test workflows and the generation of test reports. Raw data can also be further processed in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Test fixtures: Compression plates, bending devices, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Gamybos metai: 2025, Sąlyga: naujas, Universal Testing Machine PM50 Force: 50 kN Traverse stroke: 1200 mm Test area clearance: 400 mm Overall height: 1817 mm Weight: approx. 380 kg Position resolution: 0.01 mm Test speed: 0.03–1000 mm/min Return speed: 1000 mm/min Load cell: 50 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for "quick testing" without the need for a PC. For tests requiring data storage and curve recording, the basic software enables both control and data analysis. This allows you to generate various test procedures and create test reports. Additionally, there is the option to further process raw data in your own applications. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending devices, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips. Nodpod R Dp Eofx Af Ijcl

Gamybos metai: 2025, Sąlyga: beveik kaip naujas (parodų įrenginys), Universal Testing Machine PM3 Force: 3 kN Crosshead Travel: 520 mm Working Depth: 66 mm Total Height: 1036 mm Weight: approx. 40 kg Displacement Resolution: 0.01 mm Test Speed: 1–500 mm / min Nsdpfsd R Dpuox Af Ijcl Return Speed: 700 mm / min Load Cell: 3 kN Including evaluation electronics and basic software. Our testing machines are fully operable in stand-alone mode via a numerical keypad, allowing for quick tests without requiring a PC. For tests that require data storage or the recording of load curves, the basic software enables control and evaluation. The software allows you to create various test routines and generate a test report. Additionally, it provides the option to export raw data for further analysis in your own programs. Optional features: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping tools: Compression plates, bending fixtures, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Sąlyga: naudotas, Alyvos rūko surinkėjas, emulsijos rūko separatorius, naudota įranga Gamintojas: IFS Industriefilter Service GMBH Tipas: IFM 2000 Bendrieji matmenys: Ncjdpfxex Hh Nge Af Iel Plotis: 1110 mm Gylis: 700 mm Aukštis: 870 mm Svoris: 110 kg Metai: 2001 Elektros duomenys: 400V, 1,5 kW, 3,1 A

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2021, matavimo diapazonas X ašis: 500 mm, matavimo diapazonas Y ašis: 500 mm, matavimo diapazonas Z ašis: 300 mm, Įranga: apšvietimas, dokumentacija / vadovas, AIM coordinate measuring centers are the technological successors to the globally used Mahr multisensor coordinate measuring machines. Technical data: Measuring range: 500 x 500 x 300 mm Dimensions: 1520 x 1040 x 2040 mm Weight: approx. 1,200 kg Max. workpiece weight (on glass plate): approx. 40 kg Accuracies: U1=1.9 + L/200 U2=2.4 + L/150 U3=2.9 + L/100 (L = measuring length in mm) Higher precision upon request Traversing speed: 200 mm/s Acceleration: 400 mm/s Scale resolution: 0.0001 mm Multisensor sensor unit (MSH): optical / tactile / laser Nsdjg Ewk Ropfx Af Iscl Including: - High-precision USB camera with 2-stage zoom and telecentric beam path - PTL01 TTL point laser, high-precision, telecentrically coupled - Renishaw TP200 integrated tactile probing system, optionally expandable - Quad-Light LED power ring light, programmable incident light - LED power transmitted light - Nikon precision objective 5x (optional: 3x, 10x, 20x, 50x) C-Mount technology - Calibration standard with factory calibration certificate, consisting of glass plate "circle", calibration sphere, and gauge ring - State-of-the-art PT200 CNC control system in a robust, industrial-grade control cabinet - PCI-BUS system for fast internal data transfer in real-time operation - Pull-out 19" controller rack for optimum service access - Modular controller concept open for future upgrades and retrofits - Service-optimized controller design for quick access and reduced service times - Integrated 64-bit broadband bus technology with real-time data transfer - 4-channel online temperature compensation (prewired, on board) - Active safety technology for drives, light management, and sensor systems - Online remote connection for remote maintenance and online system check - LS circuit breakers for fast troubleshooting during service - Firmware adaptation for volumetric 3D full error compensation Including powerful OptiCheck3D 5.0 software. Commissioning, training, and start-up support (programming) can be booked as an additional package!

Sąlyga: naudotas, bakelio talpa: 130 000 l, BENDRAI Įranga: ventiliacija / ištrauka Konstrukcija: vertikali Ncedpfx Afexqdbkj Iel Apsisukimų skaičius: 950 / 1145 aps./min. Vidinis skersmuo: 3 500 mm Bendras aukštis: 15 860 mm Izoliacija: yra Galia: 5,5 / 6,3 kW Maišytuvas: propeleris Pastatymo tipas: stovint ant kojelių Vieta: išorinis sandėlis Tipinė lentelė: Tūris: 130 000 litrų Produkto kontaktinė medžiaga: V2A 1.4301 (AISI304) Cilindrinis aukštis: 14 660 mm Paskutinis panaudojimas: maisto pramonė TALPA Apatinis dugnas: plokščias dugnas su nuolydžiu IZOLIACIJA Izoliacinis apvalkalas: hermetiškai suvirintas ĮRANGA Žmogaus anga / dangtis: cilindre Išleidimas: yra MAIŠYTUVAS 1 Įtampa: 380 V Maišytuvo padėtis: šone prie cilindro

Sąlyga: naudotas, bakelio talpa: 20 000 l, BENDRA INFORMACIJA Įranga: įsiurbimo/išleidimo ventiliacija, purškimo galvutė, kėlimo ąsos Konstrukcijos tipas: vertikali Pastabos: 1 talpa su nedideliu įlenkimu cilindre; žmogaus anga apie 340 x 440 mm Vidinis skersmuo: 2 500 mm Bendras aukštis: 6 750 mm Didž. viršslėgis: 0,50 bar Maišyklė: maišyklės flanšas Stovėjimo konstrukcija: aukščio reguliuojamos kojos Vieta: Brėmenas Tipinė lentelė: Tūris: 20 000 litrų Ncedpfjxqc Uiex Af Isl Produkto paviršiaus medžiaga: V2A 1.4301 (AISI304) Būklė: naudotas Cilindro aukštis: 3 700 mm Paskutinis panaudojimas: vaisių sulčių pramonė TALPA Vidutinio tankis: 1,37 (t/m³) Kojų skaičius: 3 vnt. ĮRANGA Žmogaus anga / dangtis: cilindre Išleidimas: vamzdžio galas ø apie 80 mm Pastaba: išleidimo galas nupjautas MEDŽIAGOS CHARAKTERISTIKA Kojų medžiaga: nerūdijantis plienas MAIŠYKLĖ 1 Maišyklės vieta: šone ant cilindro

Gamybos metai: 2006, Sąlyga: naudotas, BENDROJI INFORMACIJA Mainų plotas: 24,7 m² Pagaminimo metai: 2006 Vidinis diametras: 508 mm Bendras aukštis: 1 340 mm Bendras ilgis: 3 270 mm Vieta: Brėmenas Techninė dokumentacija: brėžinys, TÜV sertifikatai, priėmimo sertifikatas, CE ženklinimas ir atitikties deklaracija Tipinė lentelė: Būklė: naudota Paskutinis naudojimo tikslas: metanolio kondensatorius Nsdpsxqch Njfx Af Iocl APVALKALO ERDVĖ Apvalkalo talpa: 390 litrų VAMZDŽIŲ ERDVĖ Vamzdžių talpa: 150 litrų Apvalkalo medžiaga: AISI316 (V4A) 1.4571 Vamzdžių medžiaga: AISI316 (V4A) 1.4571 Vamzdžių skaičius: 63 Maks. leistinas darbinis slėgis apvalkalo erdvėje: 0,49 bar Vamzdžių skersmuo: 25 mm Maks. leistina darbinė temperatūra apvalkalo erdvėje: 100 °C Maks. leistina darbinė temperatūra vamzdžių erdvėje: 100 °C Maks. leistinas darbinis slėgis vamzdžių erdvėje: 6,0 bar

Sąlyga: naudotas, BENDRA INFORMACIJA Šilumos mainų plotas: 0,99 m² Išorinis diametras: 200 mm Vidinis diametras: 86 mm Bendras ilgis: 2.120 mm Izoliacija: yra Kita: išorinis vamzdžių diametras apie 10 mm Vieta: Brėmenas Ncsdpfx Aexqchvsf Ijl Tipinė lentelė: Būklė: naudotas Paskutinė paskirtis: farmacijos pramonė IZOLIACIJA Izoliacijos apvalkalo medžiaga: nerūdijantis plienas APVALKALO ERDVĖ Apvalkalo erdvės tūris: 7 litrai VAMZDŽIŲ ERDVĖ Vamzdžių erdvės tūris: 3 litrai Apvalkalo medžiaga: AISI316 (V4A) 1.4571 Vamzdžių skaičius: 20 Didž. leistinas darbinis slėgis apvalkalo erdvėje: 6,0 bar Vamzdžių ilgis: 1980 mm Vamzdžių diametras: 8 mm Didž. leistina darbinė temperatūra vamzdžių erdvėje: 144 °C Didž. leistinas darbinis slėgis vamzdžių erdvėje: 7,0 bar

Sąlyga: naudotas, bakelio talpa: 25 000 l, GENERAL Equipment: crane lugs Design: upright Remarks: 2 different manufacturers (see pictures) Internal diameter: 3,200 mm Total height: 5,331 mm Heating/cooling: available Insulation: available Max. allowable operating temperature: 70 °C Max. allowable operating overpressure: 3.0 bar Base type: feet Location: external warehouse France Technical documentation: drawing Cylinder temperature control: half-pipe coil Nameplate: Capacity: 25,000 litres Jacket volume: 70.0 litres Product contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 3,000 mm Ncedoxqbz Uepfx Af Ijl Last application: food (isomalt) TANK Specific gravity of medium: 1.35 (to/m³) Bottom head: conical bottom Number of feet: 5 pcs HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation jacket: welded Insulation material: mineral wool Insulation jacket material: stainless steel Insulation thickness: 100 mm EQUIPMENT Manhole / dome: in the shell (approx. 350 x 450 mm), in top head (DN 400) Outlet: flange DN80 TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6 mm Top wall thickness: 3 mm

Sąlyga: naudotas, bakelio talpa: 1 969 l, GENERAL Design: suspended Remarks: 2 stirrup supports made from V2A (contact surface reversed, see photos) Speed: 571 rpm Internal diameter: 1,000 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 3,800 mm Heating/Cooling: available Power: 1.1 kW Max. permissible operating temperature: 200 °C Max. permissible operating pressure: 16.0 bar Max. overpressure: 3.2 bar Top head: bolted lid Seal agitator shaft: Mechanical seal without thermosiphon vessel Agitator type: propeller Support type: stirrup supports Location: Bremen Technical documentation: Drawing Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Capacity: 1,969 litres Double jacket volume: 70.0 litres Wall thickness cylinder: 6 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 2,110 mm Last application: Pharmaceutical chemistry TANK Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Bottom head temperature control: half-pipe coil EQUIPMENT Outlet: flange DN80 Note: minor adhesions MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Voltage: 220/380 Volt Nodoxqa Sljpfx Af Iocl TECHNICAL DATA / DIMENSIONS Wall thickness ends: 5.7 mm Agitator arrangement: eccentric in top head Agitator equipment: technical documentation for agitator available

Gamybos metai: 2008, Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Bio-Circle Parts Cleaner 2 units available For active environmental protection Color: green/grey The ultimate cleaning workbench – parts cleaner is in good used condition. Protective stainless steel perforated floor Ncodsfhdnbepfx Af Iol The Bio-Circle cleaning workbench – the compact parts cleaner uses an electrically operated pump to supply cleaning fluid to the 3-way valve. Depending on the position of the 3-way valve, the cleaning fluid can be directed through the hose to the washing brush, including a shelf plate for the working surface, through the articulated hose, or both, directly to the cleaning table. Operated with Bio Circle L Liquid, the container in the parts washer biologically decomposes contaminants such as cleaned-off oil/grease from the used cleaning fluid using microorganisms, in accordance with the Bio-Chem Surface Technology user manual. The used units and/or any brushes to be cleaned for natural, biological parts cleaning are equipped with an integrated heater, pump, ventilation, and filter and have been regularly maintained. The magnet in the drain strainer retains steel particles. The parts washing system is fully functional and well-preserved. Environmentally friendly cleaning for environmental protection. Dimensions of the parts cleaning unit: Parts Cleaner H 1120 x W 900 x D 600 mm, Weight 45 kg Inspection under power possible by appointment only. Price / details on request. All technical information provided without guarantee; errors and omissions excepted. We sell exclusively to countries within the European Community.

Sąlyga: naujas, Gamybos metai: 2024, Machine designation: Portal Nailing Machine for Pallet Production Manufacturer: Stoiber GmbH Model: StoNail 3000 Year of manufacture: 2024 Condition: New Price & Location: Price on request 4122 Arnreit Description: • Semi-automatic portal nailing machine for the production of various types of pallets and crate components. • For inserting loose blocks and boards, there is a flexibly adjustable clamping system or a wooden template wall available, allowing for minimal changeover times. • The operator alternates working on the machine’s left or right side, as the machine is divided into two work areas. Njdporalk Rjfx Af Iocl • The nailing bridge is equipped with up to 8 nailers using jumbo coil nails (approx. 8,000 nails). Simultaneous actuation of the nailers enables very short production cycles and thus high output rates. • Operation and programming of new pallet types is carried out via a touch display. Saved programs can be recalled at any time. No manual positioning required for teaching nailing points! • NEW – Robot for pallet stacking Technical Data: • Maximum standard pallet size: 2500 x 1700 mm per side • Maximum optional pallet size: 3500 x 1700 mm per side • Maximum nail length: 90 mm • Jumbo coil: approx. 1,000 nails/coil • Production capacity: 400–600 pallets/8h • Operators: 1–2 persons • Low operating and maintenance costs

Sąlyga: naujas, Gamybos metai: 2024, Machine designation: Portal Nailing Machine for the Pallet & Packaging Industry Manufacturer: Stoiber GmbH Model: StoNail 7000 Year of manufacture: 2024 Condition: New Price & Location: Price on request 4122 Arnreit Description: • For the production of various types of pallet and box components • Angled machine frame with wooden panel for templates • Divided into two work areas – the operator alternates between left and right sides of the machine • The nailing bridge can be equipped with up to 6 individually controlled nailers for jumbo coil nails (approx. 6,000 nails) • Machine operation and programming of new pallet types is via a touch display • Existing programs can be recalled from memory at any time • Entered parameters enable product visualization on the touch display – no manual teach-in of nailing points required • NEW – Robot for pallet stacking! Ncedporallnefx Af Isl Technical Data: • Max. standard pallet size: 3,000 x 1,700 mm per side • Max. optional pallet size: 4,000 x 2,000 mm per side • Max. nail length: 130 mm • Jumbo coil: approx. 1,000 nails/coil • Production capacity: 400–600 pallets/8 h • Operators: 1–2 people • Low operating and maintenance costs

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, Fraise head debarker with root reducer: Manufacturer: Stoiber GmbH Model: StoMill 3000 Year of manufacture: 2024 Condition: New Nsdpfx Aferk Nk Eo Ijcl Price & Location: Price on request AT – 4122 Arnreit Description: For fully automated debarking and root reduction of both hardwood and softwood logs. Advantages of the system: • Debarking head and root reducer combined in one machine • Patented safety knife shaft • Fully automatic operation • Remote control via radio transmitter • Low energy consumption Technical specifications: • Debarking shaft with 22 kW or 30 kW drive power • Reducer shaft with 15 kW - 45 kW drive power • Suitable for all logs from a length of 2 meters • Log diameter: 20 – 120 cm Options: • Chip collection box • Scraper chain conveyor for chip removal • Log ejector / log catch tray

Sąlyga: naujas, Gamybos metai: 2024, Machine designation: Gantry Nailing Machine for the Pallet & Packaging Industry Manufacturer: Stoiber GmbH Model: StoNail 7000 RT Year of manufacture: 2024 Condition: New Price & Location: Price on request 4122 Arnreit Description: • Semi-automatic gantry nailing machine with rotary turntable (R) and pallet stacking robot for manufacturing and stacking various types of pallets and crate components. Ncodpfx Asrallrof Isl • The machine features a rotary turntable with two work zones for inserting loose blocks and boards. In combination with the pallet stacking robot, this ensures optimal material flow. • The nailing bridge can be equipped with up to 6 individually controlled nailing units using jumbo coil nails (approx. 6,000 nails), providing maximum flexibility for nailing your products. • Machine operation and programming of new pallet types are managed via a touch display. Existing programs can be called up from memory at any time. The input parameters are visualized on the touch display, eliminating manual navigation for nail point learning! • NEW – Pallet stacking robot Technical data: • Max. pallet size: 3,000 x 1,700 mm per side • Max. nail length: 130 mm • Jumbo coil: approx. 1,000 nails/coil • Production capacity: 400 – 600 pallets/8 hours • Machine operators: 1 – 2 persons • Low operating and maintenance costs

Sąlyga: naujas, Gamybos metai: 2024, Board Stacking System: Manufacturer: Stoiber GmbH Model: StoStack 5000 - Layer Stacking Year of Manufacture: 2024 Condition: New Price & Location: Price on request AT – 4122 Arnreit Description: A universally applicable board stacking system for the efficient stacking of rough-sawn boards, posts, battens, and planed timber. System Advantages: • Fully automatic, flush stacking • Air gap stacking • Simple touchscreen operation Ncodpetv E D Ujfx Af Ijl • No pneumatic components—therefore, unrestricted operation even in freezing conditions Technical Data: • Flexible stacking width: up to 1200 mm • Stacking height: up to 1200 mm • Board length: from 1500 mm • Board/post width: 50 – 300 mm • Board/post height: 15 – 120 mm • Maximum board/post weight: 75 kg • Maximum layer weight: 500 kg • Cycle rate: up to 25 pieces per minute Options: • Alignment rollers for longitudinal orientation of sawn timber • Ejector for removing defective boards • Electrically adjustable side supports • Mobile machine frame: can be operated at multiple workstations by moving the unit on rails or with a forklift

Sąlyga: naudotas, Teigiama, kad nenaudotas 304 nerūdijančio plieno rezervuaras, pagamintas ROLEC Prozess und Brautechnik GMBH. Pagaminta 2015 m. Bendras tūris – 160 000 litrų, naudingas tūris – 120 000 litrų. Maksimalus darbinis viršslėgis – 0,9 bar (15 PSI). Kūginis kampas: 70°; dviguba sienelė. Rezervuaro medžiaga: nerūdijantis plienas 1.4301 (304). Atrama: 4 nerūdijančio plieno kojos su tvirtinimo plokštėmis. Vėsinimas: aušinimo skystis – glikolis; vandens temperatūra –3°C; kūgio sekcija – 1; kūgio aušinimo plotas – 12 m²; šoninių sienelių aušinimo plotas – 48 m². Rezervuaro matmenys: vidinis skersmuo – 3900 mm; išorinis skersmuo – 4100 mm; cilindro aukštis – 9000 mm; kūgio išleidimo aukštis – 1000 mm; bendras aukštis – 13 600 mm (be platformos ir armatūros). Įvairios įtekos ir išėjimai. Specifikacija: Talpa: 31 700,6 galono Skersmuo: 13,12' (pėdos) Aukštis: 44,62' (pėdos) Nerūdijančio plieno tipas: 304 Dangčių tipas: kūginis Nsdsx R Uytopfx Af Iocl Padėtis: vertikalus Kojos/tvirtinimai: 4 nerūdijančio plieno kojos su tvirtinimo plokštėmis.

Gamybos metai: 2008, Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Siūlome šį naudotą Schunk Sonosystems GmbH SWR 20 ultragarso suvirinimo aparatą, pagamintą 2008 m. Njdjx Sdt Sepfx Af Ijcl Tinklo įtampa: 3 × 400 V Jei turite klausimų arba reikia daugiau informacijos, parašykite mums žinutę arba paskambinkite.

Sąlyga: geras (naudotas), Gamybos metai: 2009, veikimo valandos: 20 709 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 106516-11, gręžimo gylis: 1 200 mm, bendras svoris: 7 500 kg, Parduodama labai gerai įrengta giluminio gręžimo staklė TBT su įvairiais priedais. Gręžimo parametrai: Velenas 1: 5-18 mm; Velenas 2: 1-4 mm Nedpfxjxgnhae Af Iocl Gręžimo gylis: apie 1200 mm prie Ø8 mm naudojant 3 atramas Velenų kiekis: 2 Velenų pavara: Velenas 1: 1x 4 kW; Velenas 2: 1x 1,2 kW Veleno apsisukimai: Velenas 1: 600-6000 aps./min; Velenas 2: 2000-24000 aps./min Greitasis eiga: 15000 mm/min Vežimo eiga (nomin.): 1800 mm Aušinimo–tepimo skystis: giluminio gręžimo aliejus Bakelio talpa: 1100 litrų Darbinė įtampa: 3AC 400V, 50Hz (bendra įvado galia: 25 kW) Būklė: gera, pagal amžių Priedai: įskaičiuota pagrindo vonelė ir įvairūs grąžtai Pageidaujama apžiūra vietoje!

Gamybos metai: 2001, Sąlyga: paruoštas naudoti (naudotas), HEK GmbH VGO 200 S Heating Cabinet Ncodpfsg Hzqbox Af Iol Dimensions (approx.): Width: 1035 mm Depth: 800 mm + 210 mm pipe Height: 820 mm

Sąlyga: naudotas, Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, Machine name: Hydraulic Tire Vulcanizing Press with Two Stations 2. General Information Manufacturer: HF TireTech Group (Harburg-Freudenberger Maschinenbau GmbH) Model / Type: KHP 46-150 Year of manufacture: 2014 Order number: 7282500526 Station Identification Left Station (Factory Number): 4L Right Station (Factory Number): 4R Control Interface System: Rockwell Automation / Allen-Bradley PanelView Plus 700 Operator elements: Integrated physical push button panel 3. Technical Data / Specifications - Configuration: Vertical hydraulic curing press with two chambers Pressure Values Maximum pressure: Not clearly legible on the attached nameplate; conforms to the design parameters of the KHP 46-150 series (typically approx. 250 bar, based on model specifications). Electrical Cabinet - Identification: Cabinet B01 Asset Tags: “024398” / “100” Hydraulic System - Unit Manufacturer: Parker Tank / Components: Branded hydraulic tank and system components Pump / Motor: Vertically mounted electric motor on white/beige hydraulic reservoir Loading Mechanism - System: Automatic loading system for green tires - Mold handling: Segmented mold operator Pneumatic Control System Control panel: Dedicated pneumatic control panel (Pneumatic PC) Ncedpsx I D A Sjfx Af Isl Equipment: Pressure regulators and solenoid valves

Sąlyga: naudotas, Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, Machine name: Hydraulic Tire Vulcanizing Press with Two Stations 2. General Information Manufacturer: Harburg-Freudenberger Maschinenbau GmbH (Rubber Technology Division) Model / Type: KHP 52-180 Year of manufacture: 2008 Order number: 70 825 00 225 Station identification Left station (factory number): 4L Right station (factory number): 4R Control Interface System: Rockwell Automation / Allen-Bradley PanelView Plus 700 Operating controls: Integrated physical pushbutton panel 3. Technical Data / Specifications - Configuration: Vertical hydraulic curing press with two chambers Pressure values Ncsdpfjx I Dyqex Af Iol Maximum pressure: 240.2 bar Test pressure: 343.8 bar Test date: January 2008 Electrical cabinet - Identification: Cabinet D11 Inventory tags: "4019311" / "99" Hydraulic system - Unit configuration: Rear-mounted green hydraulic tank and manifold block system Components: Rexroth hydraulic valves and pressure gauges (visibly installed) Loading mechanism - System: Automatic green tire loading system - Mold handling: Segmented mold manipulator Auxiliary control system Control panel: Secondary pneumatic/hydraulic valve operation panel Manufacturer: Rockwell Automation Installation location: Mounted at conveyor belt infeed