Wa Avarinio Maitinimo Technologija Gmbh pirkti naudotą (78 933)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Aktualumas
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Nurodyta data
- Seniausi skelbimai
- Nurodyta data
- Trumpiausias atstumas
- Atstumas
- Didžiausias atstumas
- Atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Naujinta paskutinį kartą
- Seniausias atnaujinimas
- Naujinta paskutinį kartą
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- Modelis
- Modelis nuo Z iki A
- Modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- Aktualumas
- Aktualumas
Mažas skelbimas
Wuppertal
1 188 km
Universalioji bandymo mašina / Tempimo bandymo mašina
Darto GmbHPM50 Universalprüfmaschine
Skambinti
Gamybos metai: 2025, Sąlyga: naujas, Universal Testing Machine PM50
Njdpeydazusfx Af Iscl
Force: 50 kN
Traverse stroke: 1200 mm
Test area clearance: 400 mm
Overall height: 1817 mm
Weight: approx. 380 kg
Position resolution: 0.01 mm
Test speed: 0.03–1000 mm/min
Return speed: 1000 mm/min
Load cell: 50 kN
Including evaluation electronics and basic software.
Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for "quick testing" without the need for a PC. For tests requiring data storage and curve recording, the basic software enables both control and data analysis.
This allows you to generate various test procedures and create test reports. Additionally, there is the option to further process raw data in your own applications.
Optional:
- Delivery & commissioning
- DAkkS or factory calibration according to DIN EN ISO 7500-1
- Grips and fixtures:
Compression plates, bending devices, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.
Mažas skelbimas
Wuppertal
1 188 km
Universalioji bandymų mašina Tempimo bandymų mašina
Darto GmbHPM10
Skambinti
Gamybos metai: 2025, Sąlyga: naudotas, Universal Testing Machine PM10
Force: 10 kN
Crosshead stroke: 700 mm
Test space: 400 mm
Overall height: 1230 mm
Weight: approx. 85 kg
Position resolution: 0.01 mm
Test speed: 1–500 mm / min
Nedpfoyc U Ugox Af Iscl
Return speed: 700 mm / min
Load cell: 10 kN
Including evaluation electronics and basic software.
Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for “quick testing” even without a PC. For tests that require data storage and curve recording, our basic software enables control and evaluation.
This allows you to generate various test sequences and create a test report. You also have the option to further process the raw data in your own software.
Optional:
- Delivery & commissioning
- DAkkS or factory calibration according to DIN EN ISO 7500-1
- Grips and fixtures:
Compression plates, bending fixtures, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.
Mažas skelbimas
Wuppertal
1 188 km
PM5 tempimo bandymo mašina
Darto GmbHPM5
Skambinti
Gamybos metai: 2025, Sąlyga: beveik kaip naujas (parodų įrenginys), Universal Testing Machine PM5
Force: 5 kN
Crosshead travel: 520 mm
Ncedpfsydanhjx Af Iol
Working depth: 66 mm
Overall height: 1036 mm
Weight: approx. 48 kg
Travel resolution: 0.01 mm
Test speed: 1–500 mm/min
Return speed: 700 mm/min
Load cell: 5 kN
Includes evaluation electronics and basic software.
Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for “quick testing” without the need for a PC. For tests requiring data storage and curve recording, the included basic software provides control and evaluation capabilities.
This enables the generation of various test sequences and the creation of test reports. You also have the option to further process raw data in your own programs.
Optional:
- Delivery & commissioning
- DAkkS or factory calibration according to DIN EN ISO 7500-1
- Grips and fixtures:
Compression plates, bending devices, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.
Mažas skelbimas
Wuppertal
1 188 km
Universali testavimo mašina
Darto GmbHPM3-1200
Skambinti
Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Universal Testing Machine PM3
Force: 3 kN
Crosshead travel: 1200 mm
Working area depth: 66 mm
Overall height: 1677 mm
Nedpeyc U Rbofx Af Iscl
Weight: approx. 55 kg
Displacement resolution: 0.01 mm
Test speed: 1–500 mm/min
Return speed: 700 mm/min
Load cell: 3 kN
Including evaluation electronics and basic software.
Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for "quick testing" without the need for a PC. For tests that require data storage and curve recording, our basic software provides control and evaluation functions.
This enables the creation of various test routines and automated test reports. Additionally, you have the capability to export raw data for further processing in your own software.
Optional:
- Delivery & commissioning
- DAkkS or factory calibration according to DIN EN ISO 7500-1
- Grips & fixtures:
Compression plates, bending devices, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.
Mažas skelbimas
Wuppertal
1 188 km
Tempimo bandymo mašina
Darto GmbHPM3
Skambinti
Sąlyga: naudotas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: PM3, Universal Testing Machine PM3 (2020)
Force: 3 kN
Crosshead Travel: 520 mm
Test Space Depth: 66 mm
Overall Height: 1036 mm
Weight: approx. 40 kg
Travel Resolution: 0.01 mm
Test Speed: 1–500 mm/min
Rücklaufgeschwindigkeit: 700 mm/min
Load Cell: 3 kN
Incl. evaluation electronics and basic software.
Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for “quick tests” without a PC. For tests requiring data storage and recording of the curve progression, the basic software provides the capability for control and analysis.
This makes it possible to generate various test sequences and create a test report. Additionally, you have the option to further process the raw data in your own programs.
Options:
Ncsdpfx Afsyc U Dbs Iel
- Delivery & commissioning
- DAkkS or factory calibration according to DIN EN ISO 7500-1
- Grips and fixtures:
Compression plates, bending fixtures, shear test fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.
Mažas skelbimas
Root
1 400 km
Paviršiaus šlifavimo mašina
ABA Z&B SCHLEIFMASCHINEN GMBHECOLINE 1206A
Skambinti
Sąlyga: geras (naudotas), Gamybos metai: 2008, šlifavimo ilgis: 1 250 mm, stalo ilgis: 1 250 mm, stalo apkrova: 1 200 kg, stalo plotis: 500 mm, veleno greitis (maks.): 2 600 aps./min, veleno greitis (min.): 1 000 aps./min, bendras svoris: 9 300 kg, X ašies eiga: 1 400 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 600 mm, galia: 185 kW (251,53 AG), įėjimo įtampa: 400 V, reikalingas aukštis: 2 870 mm, Įranga: sūkių greitis be galo kintamas, X-axis: Grinding length 1,250 mm, travel distance 1,400 mm
Y-axis: Distance table to spindle center 700 mm, travel distance 600 mm
Z-axis: Grinding width see note, travel distance 600 mm
Note: The grinding area in the transverse direction (Z-axis) depends on the travel distance and the grinding wheel width.
Example: Transverse travel = 600 mm
Ncedpfx Afju Hiq Rj Iol
Grinding wheel width 60 mm = grinding width 660 mm
Grinding wheel width 100 mm = grinding width 700 mm
See pictures for more technical data
Mažas skelbimas
Luckenwalde
784 km
Miltelinė įranga
ARNO HERING GmbH & Co. KGPTR 15-45-SE
Skambinti
Sąlyga: naudotas, Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 13-3188, bendras ilgis: 160 000 mm, bendras aukštis: 3 000 mm, bendras plotis: 9 000 mm, temperatūra: 230 °C, tūrio srautas: 100 m³/val, Powder Coating System ARNO HERING PTR 15-45-SE (Year 2006)
For sale is a complete powder coating system by ARNO HERING (Model PTR 15-45-SE), manufactured in 05/2006. The system includes an application booth, curing oven, as well as a crane runway/suspension frames (hanging racks). The plant is from ongoing production and is suitable for coating metal parts and assemblies.
Highlights / Features (Components):
- Application booth (powder application)
- Curing oven / drying oven
- Crane runway / manual overhead conveying system (guided by crane runway) incl. carrier/hanging racks
- Documentation/wiring diagrams: to be supplemented if available
Technical data (according to nameplate):
- Type: PTR 15-45-SE
- Year of manufacture: 05/2006
- Machine number: 13-3188
- Max. drying temperature: 230 °C
- Minimum exhaust air volume flow (20°C): 100 m³/h
- Max. permitted powder quantity: 10 kg/h
Notes:
Ncsdpfx Afjx Squ As Isl
Inspection on site possible by arrangement.
Loading/dismantling: by arrangement (if necessary by buyer).
Sale ex location, subject to prior sale.
We offer this used ARNO HERING PTR 15-45-SE powder coating system, year 2006.
Type: PTR 15-45-SE
Year of manufacture: May 2006
Machine number: 13-3188
Maximum drying temperature: 230 °C
Minimum exhaust air volume flow at 20°C: 100 m³/h
Maximum permitted powder quantity: 10 kg/h
If you have any questions or need further information, feel free to send us a message or give us a call.
Mažas skelbimas
Võru
354 km
šaldymo agento kompresorių komplektas
HEINEN FREEZING GMBH/ PAKTSF 7.6-11-16 SX
Skambinti
Sąlyga: naudotas, Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 812096, vietos reikalavimas ilgis: 9 000 mm, reikalingas plotis: 6 200 mm, reikalingas aukštis: 4 650 mm, galia: 34,5 kW (46,91 AG), kuro tipas: elektrinis, tūrio srautas: 130 000 m³/val, aplinkos temperatūra (maks.): 32 °C, triukšmo lygis: 95 dB, aušinimo tipas: oras, Įranga: dokumentacija / vadovas, PRAMONINIS SPIRALINIS ŠALDIKLIS PARDUODAMAS
Siūlome aukštos kokybės pramoninį spiralinių šaldiklį iš Heinen Freezing GmbH, pagamintą 2004 metais, skirtą nepertraukiamam šaldymui didelio masto maisto gamyboje. Ši tvirta sistema užtikrina patikimą veikimą ir ilgą tarnavimo laiką dėl pramoninės kokybės komponentų ir inžinerinių sprendimų.
Bendra aušinimo galia: 172 kW
Ncjdpfxsx Hhwko Af Isl
Į komplektą įeina kompresorių blokas: BITZER HSK451-70(Y) pusiau hermetiniai sraigtiniai kompresoriai – jų yra 4 vnt.
Variklio galia: 55,1 kW
Įtampa: 400 V / 3 fazės / 50 Hz
Oro aušinamas kondensatorius: (Galia 490 kW) su 4 ventiliatoriais ir 130 000 m3/val. oro srautu.
SVARBU! Išardymas ir transportavimas į kainą neįskaičiuoti, reikia atskiro susitarimo.
Mažas skelbimas
Pfullingen
1 250 km
Universalus apdirbimo centras
Stadler Keppler Maschinenbau GmbHHDC 3000, 5-achsig
Skambinti
Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2010, • Travel paths: X = 3100 mm, Y = 1950 mm, Z = 1390 mm
• Heidenhain iTNC 530 with HR 410 handwheel
• Machine table for multi-sided machining, 3000 mm x 1600 mm
• 2-axis NC universal boring and milling head, for simultaneous and positioning operation
• Spindle: 10,000 rpm, HSK 100, 130 Nm spindle torque
• Tool changer system HSK 100 / 40 tool stations for tools up to 750 mm length
• Chip augers in X-axis for optimal chip removal
Ncedox U Sfnopfx Af Iol
• Chip conveyor (scraper belt conveyor), manufacturer Knoll, for cross conveying
• Coolant supply 900 l, manufacturer Knoll
• External air supply
• ICS 60 bar for deep hole machining
• Enclosure with safety glass, open at the top for optimized crane loading
• Split sliding doors on the front side
• Split sliding doors on the operator side
• Wireless probe RMP 60
• Including wash pistol
• Including platforms at loading and operator sides
• Completely factory overhauled and newly painted
• Short delivery time upon agreement, subject to prior sale
• Used machine
• Y-axis ball screw renewed incl. bearings in September 2021
• X-axis linear guide incl. guide carriage replaced in July 2023
• Milling spindle overhauled in May 2023 (new clamping set, new clamping cartridge, new rotary union, general inspection) (23,105 spindle hours)
• Can be inspected under power in 72793 Pfullingen
• Fixators optional
• Commissioning/installation optional
• Transport optional
• Total spindle hours: 23,122
• Total machine hours: 53,991
• Year of manufacture: 2010
Subject to prior sale
Mažas skelbimas
Ursberg
1 200 km
Kėlimo konvejerio juosta konvejerių sistema
die magnetprofis GmbH & Co. KG
Skambinti
Gamybos metai: 2025, veikimo valandos: 5 h, Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2025112701, Aluminum incline conveyor with supporting frame
incl. leveling feet and machine feet for compensating uneven surfaces
- Feed height: 500 mm
- Inclined section: 4,500 mm
- Discharge height: 3,000 mm
Design:
Aluminum construction design
- Reinforced triple profile, 135x45 mm
- Full-surface discharge plate, 2.0 mm galvanized
Drive drum + return drum made of S235 steel, welded and machined
Ø150x620 mm crown-turned, shaft fixed with pillow block bearings.
Drive: Shaft-mounted gear motor 1.10 kW, belt speed 0.77 m/sec
Connection: 230/400V, 50Hz, IP54 protection class
Drive pre-wired up to terminal box
(Commissioning must be carried out by a qualified electrician)
PVC conveyor belt DM 10/2 0+005 PVC green
Belt width: 600 mm
Endless, high-frequency welded with stepped splice
Belt material: 2-ply, especially cross-stable
2 pcs. wave-edge side guides, 80 mm high, 50 mm wide, edge-flush, high-frequency welded
18 pcs. T60 cleats, 430 mm long, approx. 508 mm spacing, center-mounted
Belt material: 2-ply, especially cross-stable
Due to the double-sided wave-edge guides, the usable width of the conveyor belt is reduced:
Ncedpeydb Rwsfx Af Isl
Usable width: 500 mm, calculated as follows:
(Top view) Cross arrangement 50+500+50 mm
Mažas skelbimas
Wiefelstede
1 046 km
Srauto vožtuvas
Drumag GmbHHPV-3R mit GPRV
Skambinti
Sąlyga: naudotas, Pressure intensifier, pressure medium converter, flow valves
- Operating pressure ranges
- Hydraulic section (power section): 2 - 32 bar
Ncedpfjd Al Hmox Af Iel
- Pneumatic section (control section): 3 - 10 bar
- Flow rate: max. 16 l/min (at 6 bar inlet pressure, load-dependent)
min: 2 cm³/min (hydraulic oil with a viscosity of 21 mm²/s [3°E] at 50 °C)
- Connections hydraulic side: G3/8, pneumatic side: G1/8
- Dimensions: 140/70/H68 mm
- Weight: 1.1 kg
Mažas skelbimas
Wiefelstede
1 046 km
Maitinimo šaltinis
NorthTec GmbHVCC 2 / VCC 3
Skambinti
Sąlyga: geras (naudotas), Power Converter, Power Supply Unit, Power Supply
-Manufacturer: NorthTec GmbH
-Type: VCC 3
-Quantity: 1 unit available
Nedpsffwpasfx Af Iecl
-Price: per piece
-Dimensions: 440/255/H135 mm
-Weight: 3.1 kg/piece
Mažas skelbimas
Rheda-Wiedenbrück
1 090 km
Miniekskavatorius – Prieinamas iš karto!
Tec-Point GmbH 2,5 -t Yanmar MotorLT25P Kabine + Heizung - LS-Hydraulik
Skambinti
Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, galia: 14,6 kW (19,85 AG), pavaros tipas: automatinis, kuro tipas: dyzelinas, kuro sąnaudos per valandą: 2 l/val, kuro bako talpa: 20 l, spalva: oranžinė, bendras svoris: 2 320 kg, darbinė masė: 2 200 kg, kėlimo aukštis: 4 190 mm, pavaros būklė: 100 procentas, grandinės būklė: 100 procentas, sėdimų vietų skaičius: 1, kaušo tūris: 0,068 m³, pakaba: kitas, Gamybos metai: 2025, veikimo valandos: 5 h, Įranga: autonominis šildytuvas, guminės vikšrinės juostos, hidraulika, kabina, reguliuojama važiuoklė, The LT-25P is a compact and powerful 2.5-ton mini excavator designed for professional use in construction, landscaping, as well as municipal and agricultural applications. Its robust construction and modern load-sensing hydraulics ensure efficient, precise operation even under demanding conditions. Thanks to the swing boom, the machine is perfectly suited for work in confined spaces, as well as for standard earthmoving and foundation works.
Key Technical Features:
- Swing boom for precise operation in tight areas
- Sturdy undercarriage 1,300 / 1,500 mm for high stability
- Powerful Yanmar diesel engine
- Load-sensing hydraulic valves for finely tuned control
- High-capacity axial piston pump
- Hydraulic piston drive and swing motors
- High digging and breakout forces
- Wear-resistant rubber tracks
Weights & Dimensions:
- Operating weight: 2,200 kg
- Operating weight with cab: 2,320 kg
- Bucket capacity: 0.068 m³
- Wheelbase: 1,500 mm
- Track length: 1,940 mm
- Ground clearance (upper structure): 220 mm
- Counterweight swing radius: 670 mm
- Undercarriage width: 1,300 / 1,500 mm
- Track width: 230 mm
- Track height: 50 mm
- Transport length: 4,100 mm
- Overall height: 2,440 mm
Engine:
- Model: Yanmar 3TNV80F
Njdpfxox Hg Etj Af Iocl
- Displacement: 1.267 l
- Engine output: 14.6 kW at 2,400 rpm (16.1 HP at 2,300 rpm)
- Max. torque: 67.4 Nm at approx. 1,800 rpm
- Engine oil capacity: 3.4 l
- Fuel tank: 20 l
Travel & Performance Data:
- Travel speed: 2.0 – 3.8 km/h
- Swing speed: 9.5 rpm
- Maximum gradeability: 30°
- Maximum drawbar pull: 23 kN
- Ground pressure: 26.5 kPa
Operating Range:
- Max. digging reach at ground level: 4,520 mm
- Max. digging reach: 4,400 mm
- Max. digging depth: 2,410 mm
- Max. vertical digging depth: 1,930 mm
- Max. dumping height: 2,880 mm
- Max. digging height: 4,190 mm
- Minimum swing radius: 2,130 mm
- Bucket breakout force: 20 kN
- Arm breakout force: 13.5 kN
Dozer Blade:
- Max. lifting height: 260 mm
- Max. lowering depth: 300 mm
Undercarriage:
- Track material: rubber
- Track model: 230 × 48 × 82
- Track tensioning system: grease cylinder
Hydraulic System:
- Pump type: axial piston pump
- Delivery rate: 67.2 l/min
- Operating pressure: 24.5 MPa
- Hydraulic valves: load sensing
- Swing motor: hydraulic piston motor
- Travel motors: hydraulic piston motors
Equipment Includes:
- Swing boom
- Fully enclosed cab including heating
- Dozer blade
- Joystick controls
- LED work lights
- Comfort seat
- Rubber tracks
- Hydraulic safety valves
- Reinforced steel construction
Accessories & Attachments – Set Included:
- 25 cm trenching bucket
- 50 cm digging bucket
- 100 cm grading bucket
- Hydraulic quick coupler
Optional:
- Hydraulic quick coupler with tilt function – RRP 1,400€
- Hydraulic auger set up to Ø 300 mm (augers 150 / 200 / 300 mm + extensions) – Set price 650€ RRP
Maintenance & Warranty:
- Inspections every 250 operating hours or annually
- Warranty: 12 months Europe-wide
- Service & spare parts from stock in Rheda-Wiedenbrück (DE)
Delivery & Availability:
Excavators are available immediately. Europe-wide delivery can be arranged upon request.
This machine meets the highest safety standards and is CE certified.
2006/42/EC (Machinery Directive)
2014/30/EU (EMC Directive)
2011/65/EU (RoHS Directive)
Interested? Contact us today!
SET NET PRICE: €22,000 RRP
Location: Rheda-Wiedenbrück
Mažas skelbimas
Rheda-Wiedenbrück
1 090 km
Miniekskavatorius – Prieinamas iš karto!
Tec-Point GmbH - 2,0 t Kubota Motor D902LT20P Schnellwechsler - Kabine+Heizung
Skambinti
Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, galia: 11,8 kW (16,04 AG), pavaros tipas: automatinis, kuro tipas: dyzelinas, kuro sąnaudos per valandą: 1,5 l/val, kuro bako talpa: 19 l, spalva: oranžinė, bendras svoris: 1 800 kg, darbinė masė: 1 800 kg, kėlimo aukštis: 3 570 mm, pavaros būklė: 100 procentas, grandinės būklė: 100 procentas, sėdimų vietų skaičius: 1, kaušo tūris: 0,04 m³, kasimo kibiro plotis: 485 mm, Gamybos metai: 2026, veikimo valandos: 5 h, Įranga: autonominis šildytuvas, guminės vikšrinės juostos, hidraulika, kabina, reguliuojama važiuoklė, The LT-20PRO is a modern, powerful and versatile 2-ton mini excavator, designed for continuous professional use in structural, civil, and landscaping construction. With its robust steel frame, advanced load-sensing hydraulics and compact dimensions, this machine is ideal for confined job sites as well as demanding earthmoving and foundation work. The fully enclosed cab with integrated heating makes the LT-20PRO a true all-season machine, offering high operator comfort, safety, and productivity – even in cold, wet, or windy conditions.
Main technical features:
- Swing boom for precision operation in confined spaces
- Telescopic undercarriage (990–1,300 mm) for maximum stability
- Integrated travel motors with high/low-speed selection
- Load-sensing hydraulic valves – energy efficient & sensitive operation
- Axial piston pump with variable displacement
- Slewing ring driven by hydraulic plunger motor
- Dual cast counterweights for superior stability
- Wear-resistant rubber tracks 230×48×70
Weights & dimensions:
- Operating weight: 1,800 kg
- Bucket capacity: 0.04 m³
- Wheelbase: 1,230 mm
- Track length: 1,595 mm
- Ground clearance (upper structure): 460 mm
- Counterweight swing radius: 735 mm
- Undercarriage width: 990 / 1,300 mm (telescopic)
- Track width: 230 mm
- Track height: 380 mm
- Transport length: 3,600 mm
- Overall height: 2,450 mm
- Bucket width: 485 mm
Engine:
- Kubota D902-E4B-CBH-1
- Displacement: 0.898 l
- Engine power: 11.8 kW at 2,300 rpm (16.1 hp)
- Max. torque: 51.3 Nm at 1,800 rpm
- Engine oil capacity: 3.7 l
- Fuel tank: 19 l
Travel & performance data:
- Travel speed: 2.2 / 4.5 km/h
- Swing speed: 9.5 rpm
- Max. gradeability: 30°
- Max. drawbar pull: 18 kN
- Ground pressure: 29 kPa
Working range:
- Max. digging reach at ground level: 3,840 mm
- Max. digging reach: 3,910 mm
- Max. digging depth: 2,270 mm
- Max. digging height: 3,570 mm
- Max. dumping height: 2,480 mm
Dozer blade:
- Max. lift height: 280 mm
- Max. drop depth: 190 mm
Hydraulic system:
- Pump type: Axial piston pump
Ncsdpfxsx Hg D Ao Af Ijl
- Delivery rate: 64 l/min
- Operating pressure: 23 MPa
- Hydraulic valves: Load Sensing
- Slew motor: Hydraulic piston motor
- Travel motors: Hydraulic piston motors
- Hydraulic oil tank: 17.5 l
Equipment:
- Fully enclosed cab including heater
- Joystick control
- LED work lights
- Comfort seat
- Rubber tracks 230×48×70
- Dozer blade
- Hydraulic safety valves
- Reinforced steel construction
- Dual cast counterweights
Accessories & attachments – SET included:
- 25 cm trenching bucket
- 50 cm trenching bucket
- 100 cm grading bucket
- Hydraulic quick coupler
Optional:
- Hydraulic quick coupler with tilt function – €1,400 RRP
- Hydraulic auger set up to Ø 300 mm (augers 150 / 200 / 300 mm + extensions) – SET PRICE €650
Maintenance & Warranty:
- Service intervals: every 250 operating hours or annually
- Warranty: 12 months, Europe-wide
- Service & spare parts from Rheda-Wiedenbrück (DE) stock
Delivery & Availability:
- Excavators available immediately
- Europe-wide delivery arranged on request
This unit meets the highest safety standards and is CE certified.
- 2006/42/EC (Machinery Directive)
- 2014/30/EU (EMC Directive)
- 2011/65/EU (RoHS Directive)
Interested? Contact us today!
SET NET PRICE: €20,500 RRP
Location: Rheda-Wiedenbrück
Mažas skelbimas
Wiehl
1 183 km
Periferinis įrenginys
FARRAG TECH GmbHCard 70S
Skambinti
Sąlyga: naudotas, Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Parduodami 2 Farrag firmos suslėgto oro džiovintuvai; daugiau techninės informacijos pateikiama užklausus.
Naujo kaina apie 6.500 €
Tipas 1: SCARD 100 Tipas 2: SCARD 70
Nsdpfx Ajvkdkisf Iecl
Metai: 2005
Galia: 3,1 kW
Mažas skelbimas
Nyderlandai
1 127 km
80 t balų presas su specialiu presavimo rėmu sudėtingoms medžiagoms
Avermann Maschinenfabrik GmbH & Co. KGAVOS 1410-45/80
Skambinti
Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2009, veikimo valandos: 22 029 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 80 t, pildymo angos plotis: 1 000 mm, pildymo angos ilgis: 1 400 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 16 000 kg, galia: 45 kW (61,18 AG), paskutinio kapitalinio remonto metai: 2025, Technical Data Press:
Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany
Model: AVOS 1410-45/80
Year of manufacture: 2009
Operating hours: 22,029 hours (as of December 2025)
Press force: 80 kN
Specific pressing force: 103.9 N/cm²
Feed chute dimensions: 1,400 x 1,000 mm
Theoretical cycle time: 12 seconds
Theoretical throughput: 300 m³/hour
Bale dimensions: 1,100 x 750 mm (W x H), length is variable
Drive power: 45 kW
Total connected load: 75 kW
Tying: 4-fold vertical, fully automatic
Throughputs at a bulk density of:
30 kg/m³ approx. 6.0 t/hour
50 kg/m³ approx. 10.5 t/hour
100 kg/m³ approx. 17.5 t/hour
Bale weights at a bale length of approx. 1.2 m: up to 600 kg, depending on material
PLC controller: Siemens S7-300
Ncjdpfsx A U Ncjx Af Iol
Display panel: Pulsotronic
Installed machine dimensions: 8,610 x 2,400 x 3,835 mm (L x W x H)
Transport weight of press: 16 t
Special Equipment:
• Wear-resistant floor made of HARDOX steel
• Special press ram for compacting 'difficult' materials and loose bulk materials of small particle size
• Control cabinet air-conditioning
• Machine feet height increase by 200 mm
Comment:
The machine was serviced and partially overhauled in our workshop. The following work was performed and parts replaced:
• Disassembly of the press ram, breakdown into individual parts, overhauling the mechanics, replacement of the following plastic wear plates and rails:
o Plastic wear rails left/right below the press ram
o Plastic wear rails left/right above the press ram
o Main plastic wear plate (support plate) centrally under the press ram
• Steel guide rails left/right above in the frame renewed
• Replacement of the entire base plate, four-part, made from wear-resistant HARDOX steel
• Wire feed rails in the press floor newly welded and smoothed
• Replacement of counter knife, two-part, in the frame
• Adjustment of the knife gap to approx. 2.5 mm
• Disassembly of the tie and twisting unit, breakdown into individual parts, overhauling the mechanics, replacement of all groove ball bearings and axial ball bearings of the twisting shafts, wire cutters cleaned and re-adjusted, chains lubricated and tensioned
• Support roller in front of the twisting shafts replaced
• All hydraulic hoses renewed
• Oil and air filters renewed
• Main hydraulic cylinder checked for leaks
• The hydraulic oil is only one year old, was chemically analyzed, is still in good condition and therefore was not replaced; it can continue to be used
• General maintenance carried out
Finally, the press was subjected to a machine test in manual and automatic mode; see video for machine function test.
Mažas skelbimas
Nyderlandai
1 127 km
Presas VK 4812
HSM GmbH + Co. KGBallenpresse, VK 4812
Skambinti
Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2014, veikimo valandos: 5 612 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 48 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 1 250 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 550 kg, bendras aukštis: 2 800 mm, bendras svoris: 12 000 kg, transporto aukštis: 2 800 mm, alyvos bako talpa: 300 l, galia: 30 kW (40,79 AG), tūrio srautas: 332 m³/val, Technical Data – Baler:
Manufacturer: HSM GmbH + Co. KG
Model: VK 4812
Year of Manufacture: 2014
Operating Hours: 5,612 hours as of August 2025
Main Press Force: 48 t
Specific Press Force: 58.2 N/cm²
Feed Opening Dimensions: 1,250 x 1,020 mm
Theoretical Cycle Time: 11.2 sec
Theoretical Throughput: 332 m³/hour
Bale Dimensions: 1,100 x 750 x 600 up to 1,200 mm
Drive Power: 30 kW
Total Connected Load: 32 kW
Rated Current: 59 A
Binding System: 4-fold horizontal, fully automatic
Throughput rates by bulk density:
- At 20 kg/m³: up to 6 t/hour, depending on material
- At 50 kg/m³: up to 13 t/hour, depending on material
Bale Weights: up to 550 kg, depending on material
PLC Control: Siemens SIMATIC S7-200
Ncjdpovtpq Hjfx Af Iol
Operator Panel: Siemens HMI Touch Panel
Hydraulic Oil Tank Capacity: 300 L
Oil Grade: HVI 46
Machine Installation Dimensions with Bale Slide: 10,046 x 4,387 x 2,705 mm (L x W x H)
Transport Dimensions (Press): 8,500 x 2,500 x 2,750 mm (L x W x H)
Machine Weight (Press): approx. 12 t
Scope of Delivery:
- HSM VK 4812 baler, without hydraulic oil, without conveyor equipment
- Two wire spool boxes for 8 pieces of 40 kg wire spools, without wire
- Bale slide
- Machine documentation in German
Remarks:
The baler is equipped with an oil cooler and potential-free contacts for external control. Operation at the control cabinet is on the left in the pressing direction; the needle unit is on the right and can be folded back for transport.
The baler has been partially overhauled and tested in our workshop, see photos and our function video.
Documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Inspection by appointment. No liability is assumed for technical details or potential errors.
Mažas skelbimas
Dresden
822 km
Automatinis optinio tikrinimo įrenginys
Göpel electronic GmbHAOI Advanced Line X60
Skambinti
Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Göpel electronic GmbH Automatic Optical Inspection Unit AOI, OptiCon AdvancedLine X60
Nodjwlquiopfx Af Iscl
Model: OptiCon
Type: AdvancedLine X60
Operating hours: 51,326 h (power-on time from internal PLC)
Year of manufacture: 2014
Technical Data:
Voltage: 230V AC
Frequency: 50/60Hz
Rated power: 800VA
Short-circuit breaking capacity: 15kA
Compressed air: 6 bar
Laser class: 2
Protection rating: IP20
Equipment:
- 4MP camera with T21 resolution and 42x42 mm field of view
- Oblique angle view – 'Chameleon Colour' module
- Extended inspection range in X-direction to 670mm
- 2D barcode reader from below
- Software version: 5.3
Mažas skelbimas
Rheda-Wiedenbrück
1 090 km
Mini ekskavatorius 2,5 t - Galimas iš karto!
Tec-Point GmbH - Motor Kubota D1105HT25P mit Stahlketten - Heizung + Klima
Skambinti
Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, galia: 14 kW (19,03 AG), pavaros tipas: automatinis, kuro tipas: dyzelinas, spalva: oranžinė, darbinė masė: 2 500 kg, pavaros būklė: 100 procentas, grandinės būklė: 100 procentas, sėdimų vietų skaičius: 1, kaušo tūris: 0,07 m³, Gamybos metai: 2025, veikimo valandos: 5 h, Įranga: autonominis šildytuvas, greito keitimo įrenginys, hidraulika, kabina, oro kondicionavimas, plieninės vikšrinės grandinės, The HT25PRO is a high-performance 2.5 t class premium mini excavator, designed for professional and demanding applications.
As a larger and more powerful version of the HT20, it offers increased power, reach, stability, and productivity.
Equipped with an original Kubota diesel engine, load-sensing hydraulics, and a reinforced manganese steel construction, the HT25PRO is ideal for civil engineering, landscaping, municipal services, and agricultural operations.
Technical Specifications:
Engine: Kubota D1105
3-cylinder diesel engine
Output: 14 kW rated (continuous), up to 18.4 kW peak (no selectable power modes)
Very low vibrations
Fuel-efficient
Designed for continuous operation
Ncodpfex Hhu Nex Af Isl
Hydraulics:
Load-sensing hydraulic pump
Load-sensing multi-way hydraulic valve
Hydraulic pump pressure: 25 MPa
System pressure: 22 MPa
Hydraulic flow rate: 61.6 l/min
Travel motor with high/low speed (Japan standard)
High-quality, durable hydraulic hoses
Dimensions & Weight:
L × W × H: 345 × 143 × 250 cm
Chassis width: 140 cm
Operating weight: 2,500 kg
Working Range:
Swing boom left/right
Rotation function
Max. digging depth: 2,370 mm
Digging/dumping height: 3,500 mm
Undercarriage & Structure:
Manganese steel undercarriage with high torsional strength
Extendable/telescopic undercarriage
Laser-cut, high-precision steel components
Heavy cast iron counterweight
Equipment:
Steel tracks (extremely robust, professional application)
Fully enclosed cab
Heating and air conditioning
Excellent all-around visibility
Ergonomic controls
Joystick operation
LED work lights
Comfort seat
Reinforced steel structure
Accessories / Attachments (included in set):
25 cm trenching bucket with removable teeth
50 cm trenching bucket
100 cm grading bucket
Hydraulic quick coupler including solenoid valves and oil lines
Optional:
Hydraulic auger set up to Ø 300 mm
(augers 150 / 200 / 300 mm + extensions) – SET PRICE €850 RRP
Service & Warranty:
Inspections every 250 operating hours or annually
Warranty: 12 months Europe-wide
Service & spare parts stocked in Rheda-Wiedenbrück (DE)
Delivery & Availability:
Excavator is in stock and ready for immediate use
Europe-wide delivery organized on request
This machine meets the highest safety standards and is CE-certified.
2006/42/EC (Machinery Directive)
2014/30/EU (EMC Directive)
2011/65/EU (RoHS Directive)
Interested? Contact us today!
SET NET PRICE: €23,500 RRP
Location: Rheda-Wiedenbrück
Mažas skelbimas
Wiesbaden
1 191 km
Lazero staklės
SK LASER GmbHFaserlaser 20W MOPA F20iMW1
Skambinti
Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: F20iMW1 Faserlaser, ruošinio svoris (maks.): 50 kg, lazerio galia: 20 W, aušinimo tipas: oras, bendras plotis: 920 mm, bendras aukštis: 1 760 mm, bendras ilgis: 940 mm, bendras svoris: 250 kg, garantijos trukmė: 6 mėnesiai, aukščio reguliavimo tipas: elektrinis, nuskaitymo srities plotis: 175 mm, stalo ilgis: 710 mm, stalo plotis: 400 mm, lazerio bangos ilgis: 1 064 nm, Įranga: kabina, Used fiber laser system for professional engraving, marking, and etching of metals and plastics.
Industrial-grade, laser class 1, CE-compliant, Made in Germany.
Technical Specifications
- Laser source: IPG Ytterbium fiber laser (MOPA)
- Power: 20 W
- Wavelength: 1064 nm
Nsdpfxeyctfdo Af Iscl
- Pulse frequency: 20–200 kHz
- Beam quality: M² < 1.6
- Power supply: 230 V / 50 Hz
Scanner & Optics
- X-Y galvo scanner for 1064 nm
- F-Theta lens f = 254 mm
- Marking field: approx. 175 × 175 mm
- Pilot laser (red) + 2 distance lasers for focus adjustment
Machine & Work Area
- Enclosed laser class 1 workstation
- Combined sitting/standing workstation
- Motorized Z-axis (400 mm gross travel)
- Stainless steel worktop with 25-mm hole grid
- Extraction port DN50 (extraction unit not included)
Control & Software
- Industrial PC
- SK CONTROL marking software (texts, logos, QR codes, variable data)
- Ethernet, USB, RS232, start/stop for extraction system
- 23" monitor, keyboard & mouse
Scope of Delivery & Safety
- Complete machine with aluminum housing
- Emergency stop, main switch, status indicators
- Circuit diagrams & operating manual
- CE, TÜV-inspected
- Laser class 1
Mažas skelbimas
Hannover
977 km
3D spausdintuvas
BigRep GmbHStudio G2
Skambinti
Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2023, veikimo valandos: 50 h, bendras ilgis: 1 000 mm, bendras aukštis: 500 mm, bendras plotis: 500 mm, įvesties srovės tipas: Oro kondicionierius, bendras svoris: 550 kg, temperatūra: 280 °C, aplinkos temperatūra (min.): 15 °C, aplinkos temperatūra (maks.): 28 °C, pozicionavimo tikslumas: 0,1 mm, sienelės storis: 1 mm, vietos reikalavimas ilgis: 2 715 mm, reikalingas aukštis: 2 765 mm, reikalingas plotis: 2 170 mm, High-Performance Materials: Best-in-Class Print Heads
Equipped with its advanced nozzles, the STUDIO G2 is engineered for printing with fiber-reinforced and other industrial-grade materials at maximum speed and precision. Its specially developed extruder delivers exceptional detail fidelity with layer thicknesses starting from 0.1 mm, even on objects up to one meter in length. This provides more options for refining the mechanical properties of your components.
Nsdpfx Afewgbcyo Iecl
Optimal Printing Temperatures: The Heated Build Chamber
The fully enclosed, temperature-controlled build chamber of the STUDIO G2 creates ideal conditions for printing with industrial-grade materials. Transparent doors allow users to visually monitor the printing process, ensuring safe and easy access to the print bed. User-friendly features like automatic pausing when the enclosure is opened guarantee a smooth and safe printing experience.
Independent Temperature Control: Heated Filament Chambers
The integrated heated filament chambers in the STUDIO G2 maintain a consistently controlled, dry environment for print materials, ensuring an unrivaled print quality in this class. The filament chamber exceeds industry standards by offering temperature control independent of the build chamber.
Optimal Printing Temperatures: Rapid-Heating Print Bed
Minimal setup time thanks to a rapid-heating print bed. Bed temperatures up to 100°C improve adhesion and broaden material compatibility. A new inductive sensor enables quick, precise semi-automatic bed leveling.
Simple & Intuitive: The New Slicer
The user-friendly BigRep “BLADE” slicing software provides greater control over print parameters and comes with presets for all BigRep-compatible materials, enabling a fast and hassle-free production start. BLADE is one of the fastest and most precise slicers on the market, purpose-built for large-format prints.
Room for Every Idea: The Large Print Volume
Foster innovation with the generous build volume of the STUDIO G2: 500 mm x 1000 mm x 500 mm, all within a compact housing and featuring functions optimized for rapid production of large-format, industrial-grade parts with high resolution.
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Ibbenbüren
1 113 km
Gramofonas
Smartvac GmbHD1000 V1K
Skambinti
Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, veikimo valandos: 10 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 09-009-09-00001-00, bendras aukštis: 940 mm, bendras plotis: 1 160 mm, bendras ilgis: 1 030 mm, atidarimo plotis: 330 mm, plokštės skersmuo: 1 021 mm, plokštės aukštis: 198 mm, stalo aukštis: 730 mm, Product description:
With various diameter sizes and storage capacities, the rotary table offers optimal feeding, removal, and buffering options for packaging materials. The rotary table is placed at the end of your line to receive products and serves as an intermediate buffer. The buffer is flexible and can be easily removed from or integrated into the line at any time without major effort. The turntable is low-maintenance, economical, and energy-saving.
Ncsdoq Tb Enepfx Af Ijl
The speed is adjustable.
Mažas skelbimas
Ibbenbüren
1 113 km
Vakuuminio pakavimo mašina
Smartvac GmbHPerformance Line
Skambinti
Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, veikimo valandos: 10 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 23-034, bendras plotis: 1 100 mm, bendras ilgis: 4 570 mm, bendras aukštis: 2 060 mm, A packaging machine from Smartvac that was exhibited at trade fairs.
Nodjq H R Taepfx Af Iscl
- Bottom film width: 320(+2/+4) mm
- Top film width: 302(+/-1) mm
- Index length: 220 mm
- Forming depth: 100 mm
- Machine configuration for vacuum packaging
Maximum pack size: 281 x 202 x 100 mm
Mažas skelbimas
Wiedergeltingen
1 206 km
5 ašių CNC frezavimo staklės
HG GRIMME SysTech GmbHCNC Maschine - 5-Achs Fräsmaschine RT-F
Skambinti
Sąlyga: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, ruošinio ilgis (maks.): 1 000 mm, ruošinio plotis (maks.): 800 mm, ruošinio aukštis (maks.): 400 mm, veleno greitis (min.): 1 000 aps./min, veleno greitis (maks.): 36 000 aps./min, Puikiai tinka: itin efektyvus 3D frezavimas mažiems ruošiniams – preciziškas frezavimas su dideliu dalių našumu
Medžiagos: plastikai, kompozitai (pvz., anglies ar stiklo pluoštu armuoti kompozitai), modelinės medžiagos, aliuminis
Sektoriai: automobilių pramonė, aviacija, transportas ir logistika, laisvalaikio pramonė, santechnika, laivų statyba, automatizacija
_____
Nuorodos numeris: 1218
Prieinamumas: 2026 m. kovo mėn.
Modelis: 5 ašių CNC frezavimo įrenginys RT-F 1400
Veleno duomenys: 8 kW / 6,4 Nm; 1000–36000 aps./min.; HSK E 40
Greitaeigis X/Y/Z: 40/40/30
Detalės matmenys X/Y/Z: 1000 x 800 x 400 mm
Ncodpfoxdwndex Af Iel
Valdiklis: SIEMENS – Sinumerik One su HT 2
Įrankių keitiklis: 12 įrankių
Stalai: 1 apvalus stalas
Įrankių gedimo ir ilgio kontrolė: Renishaw-TS 27 R
Kita: drožlių lovys, perforuotas užlipimo laiptelis
Pagaminimo metai: 2026
Būklė: nauja
Mažas skelbimas
Wiedergeltingen
1 206 km
5 ašių CNC frezavimo staklės
HG GRIMME SysTech GmbHCNC Maschine - 5-Achs Fräsmaschine RT-F
Skambinti
Sąlyga: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno greitis (min.): 12 000 aps./min, veleno greitis (maks.): 36 000 aps./min, CNC staklės iš HG GRIMME SysTech
Puikiai tinka: itin efektyviam 3D frezavimui mažiems ruošiniams – tikslus apdirbimas su dideliu detalių kiekiu
Medžiagos: plastikai, kompozitai, tokie kaip CFK / GFK, modeliavimui skirtos medžiagos, aliuminis
Sektoriai: automobilių pramonė, aviacija, transportas ir logistika, laisvalaikio pramonė, santechnika, laivų statyba, automatizavimas
Prieinamumas: 2026 m. sausis
Modelis: 5 ašių CNC frezavimo staklės RT-F 1400
Veleno duomenys: 8 kW / 6,4 Nm; 1000–36000 aps./min; HSK E 40
Greito pervedimo eiga X/Y/Z: 40/40/30
Detalės matmenys X/Y/Z: 1000 x 800 x 400 mm
Valdymas: Fanuc su IPC, rankinis pultas HMOP Type B
Įrankių keitiklis: 12 įrankių
Stalai: 1 apskritas stalas
Vakuuminė sistema: taip
Nedpfx Afox S Etms Ijcl
Įrankio lūžio ir ilgio kontrolė: Renishaw-TS 27 R
Kita: Skiedrų vonelė, skylėta pakopa, galinis ištraukimo gaubtas
Metai: 2026
Būklė: naujas
Palengviname jums paiešką: "wa avarinio maitinimo technologija gmbh"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
Naudota Wa Avarinio Maitinimo Technologija Gmbh (78 933)
Dabar ieškokite visame Machineseeker su daugiau nei 200 000 naudotų mašinų.Naršykite populiariausius mašinų pavadinimus:
- A1
- Af 222
- Atsarginė Nh C00 50A U 35 U 32 A
- Automobilių Dirbtuvės
- Besiūlių Vamzdžių Ir Vamzdelių Plasmateknik
- Darbuotojų Saugos Ir Sveikatos
- Ekscentrinis Var˛tas Siurblys
- Elektros Variklio Vakarų D M Arba S 132 4
- Emb 9352 E
















































































































































































































































