Vonios Lentyna pirkti naudotą (3 340)

Būklė: naudotas, Aukštos kokybės naudotos plataus tarpo lentynos. Puikiai tinka sandėliuoti prekes, kurios yra per didelės standartinėms lentynoms, tačiau nereikia pilnos padėklinės stelažinės. Pagaminta iš aukštos kokybės, cinkuoto plieno, itin tvirtos, paprasta naudoti ir greitai surenkama. Hjdpfxjrfa Sko Abvefg Komplektas susideda iš: 20

Būklė: naudotas, Šis lentynų išplėtimas yra praktiškas papildymas prie esamų lentynų sistemų ir siūlo efektyvų sprendimą paprastam sandėliavimo talpos padidinimui. Dėl modulinės konstrukcijos sistemą galima lanksčiai plėsti, taip užtikrinant aiškią ir skalę pritaikomą sandėliavimo sprendimą. Hfodpfxey Hpw Ej Abvjg

Būklė: naudotas, Skalbinių vežimėlis su ratukais, 674 litrų – Cinkuotas skalbinių konteineris su 2 lygiais Šis skalbinių vežimėlis yra tvirta ir praktiška išeitis didelių skalbinių kiekių transportavimui bei laikymui. Dėl apgalvotos konstrukcijos ir didelės talpos, jis puikiai tinka skalbykloms, viešbučiams, Hedpfxsy Hpz Rj Abvofg

Būklė: naudotas, Nuo 80,00 € dabar už 80,00 €. Dabar su 10% nuolaida. Ši lentynų sistemos pradinė dalis – efektyvus ir ilgaamžis sprendimas tvarkingam prekių sandėliavimui sandėliuose, dirbtuvėse ir logistikos aplinkoje. Dėl modulinės konstrukcijos ir tvirtos gamybos idealiai tinka profesionaliam naudojimui. Hjdpfxoy Hpwro Abvjfg

Būklė: geras (naudotas), Srautinė sandėliavimo lentyna Karton Flow Profesionali ritinėlių sistema: INTERROLL Komplekte penkios ritinėlių lentynos, kiekvienos matmenys: 200 x 130 cm Galimybė konfigūruoti skirtingam kartoninių dėžių pločiui. Bendri lentynos matmenys: 230 x 135 cm, aukštis 285 cm Galima apie 100 vnt. lentynų Hfodpfx Aeiuidijbveg Siūlome ir kitų matmenų lentynas. Techninė būklė: naudota, gera techninė būklė.

Būklė: geras (naudotas), bendras ilgis: 1 000 mm, bendras plotis: 600 mm, bendras aukštis: 2 500 mm, keliamoji galia vienai sandėliavimo sekcijai: 150 kg, TECHNICAL DATA • Manufacturer: META • Frame height: 2,500 mm • Shelf width: 1,000 mm • Frame depth: 600 mm • Shelf load: 150 kg • Number of shelves per section: 6 pieces • Surface: galvanized • Boltless assembly • Condition: used Large quantities available for immediate delivery. Tiered net prices per item, plus VAT: Starter section: 1 - 5 sections: €92.30 6 - 20 sections: €88.61 21 - 50 sections: €84.92 from 51 sections: €81.22 Add-on sections: 1 - 10 sections: €63.55 11 - 25 sections: €61.01 26 - 75 sections: €58.47 from 76 sections: €55.92 Available ex stock Nordhorn. YOUR CONTACT PERSONS: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping can be arranged for an additional fee. The extra costs depend on the delivery location and the size of the shipment and can be requested directly from us. PAYMENT TERMS Payment conditions are to be agreed upon at the time of order. The price stated is per item/net price or as specified in the description (plus VAT). Naturally, you will receive an invoice with VAT shown separately. Hfodouk E Thopfx Abvjg ABOUT US DLK, based in Nordhorn, trades new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machines for commerce, industry and the trades. We continuously offer attractive used equipment from a variety of manufacturers/brands at competitive prices. If you have any questions, feel free to contact us. Connect Four – The four DLK success factors: Storage Technology | Levelmaker® | Logistics | Solutions

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, spalva: balta, krovinių skyriaus plotis: 1 430 mm, krovimo vietos ilgis: 2 680 mm, krovos erdvės aukštis: 2 300 mm, mašinos/transporto priemonės numeris: Sanitärcontainer Module T, Įranga: apšvietimas, aušinimo blokas, dušas, karštas vanduo, oro kondicionavimas, vonios kambarys, Sanitary Container | WC Container | Double WC Container | 143cm x 2268cm | Model Double WC | High-Quality and Flexible Solution Buy WC Container – 2 Cabin NEW | Compact Toilet Container, 3.83 m² | Sanitary Container Buy WC container directly from the manufacturer – compact toilet cabin with 2 cubicles (3.83 m²), ready for immediate use. Ideal for construction sites, events, parks, and public spaces. Buy WC Container – compact toilet container with 2 cabins "Manufacturer of modular containers – tailor-made solutions based on your requirements, including custom dimensions and premium interior fittings." The WC Container SN-20 from MODULE-T Germany GmbH is the ideal solution if you are looking to purchase a toilet container with 2 cabins. With a compact footprint of just 3.83 m², this sanitary container offers two separate WC cabins and allows simultaneous use with minimal space requirements. Thanks to its robust steel construction, hygienic fittings, and plug-and-play design, this WC container is immediately operational and perfectly suited for mobile applications. 👉 Purchase WC Container now – compact, hygienic & direct from the manufacturer 🟩 Areas of Application - WC containers for construction sites - Toilet containers for events & functions - Sanitary containers for public facilities - Mobile toilet systems for parks & outdoor areas - Temporary sanitation solutions for industry & commerce 🟩 Your Advantages at a Glance ✔️ WC container with 2 cabins – parallel usage possible ✔️ Extremely compact – only 3.83 m² footprint ✔️ Sanitary container – mobile & flexible ✔️ Ready for immediate use ✔️ Hygienic, easy to maintain & low maintenance ✔️ Robust steel construction – durable & stable ✔️ 100% new – no rental or used containers ✔️ Direct from manufacturer – excellent value for money ✔️ Forklift sleeves and 4 lifting hooks included 🟩 Technical Specifications - Model: SN-20 - Dimensions: 268 × 143 cm - Area: 3.83 m² - Internal height: 2.35 m - External height: 2.60 m Construction: - Powder-coated steel frame Walls: - 50 mm PU sandwich panels - Optional: reinforced insulation / mineral wool Floor: - PVC covering over fibre cement board - Water-resistant & durable 🟩 Included Equipment - 2 separate WC cabins with flush toilets - Ventilation system for optimal air circulation - Ready-to-connect for water & wastewater - LED interior lighting - Power sockets & light switches - Integrated fuse box 👉 Instantly usable without additional installation 🟩 Optional Equipment Hfedpfoy Dayxox Abvjg - Washbasin (internal or external) - Urinal, soap dispenser & hand dryer - Electric heater or air conditioning - Stainless steel or vandalism-proof equipment - Hot water boiler (10 / 30 Litres) - Expandable to complete sanitary facilities 🟩 Delivery & Assembly 🚚 Delivery Germany & Europe: approx. 45–50 days 📦 Delivery assembled or as flat-pack ⚡ Immediately operational after connection 🟩 Why MODULE-T Germany? - Over 15 years of container construction experience - Specialist for sanitary containers & WC containers - Europe-wide delivery & projects - Direct from the manufacturer – no intermediaries 🟩 Call-to-Action 👉 Buy WC container now or request a quote 👉 Secure individual consultation directly from the manufacturer

Būklė: geras (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, Bendra leistina apkrova: 15 000 kg, ištraukiamos lentynos apkrova: 3 000 kg, nuosavas svoris: 4 830 kg, bendri stelažo matmenys: apie I/700/P/230/A/255 cm, stelažo lentynos matmenys: apie I/660/P/167 cm, su 5 ištraukiamomis lentynomis. Hfodjy Hi Dxspfx Abvog

Būklė: naudotas, bendras ilgis: 1 500 mm, bendras plotis: 600 mm, bendras aukštis: 2 000 mm, TECHNICAL DATA • Manufacturer: Metalsistem • Frame height: 2,000 mm • Shelf width: 1,500 mm • Frame depth: 600 mm • Shelf load: 100 kg • Number of shelves per bay: 4 pieces • Finish: galvanized • Condition: used Large quantities available immediately. PRICES: • Starter bay: €74.00 net per unit • Extension bay: €58.00 net per unit Tiered prices, net per unit plus VAT: Starter bays: • 1 - 5 bays: €74.00 net per unit • 6 - 20 bays: €70.30 net per unit • 21 - 50 bays: €66.60 net per unit • from 51 bays: €62.69 net per unit Extension bays: • 1 - 5 bays: €58.00 net per unit • 6 - 20 bays: €55.10 net per unit • 21 - 50 bays: €52.20 net per unit • from 51 bays: €49.30 net per unit YOUR CONTACTS WITH US: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp Hfedjy D Tdkopfx Abveg TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible for an additional charge. The extra costs depend on the delivery location and size of the shipment, and can be requested from us individually. PAYMENT TERMS Payment terms are to be agreed upon on order. The price is stated per unit/net price or as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK in Nordhorn is a supplier of new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machines for trade, industry and the skilled trades. We continuously offer you interesting used items from various manufacturers/brands at attractive terms. If you have any questions, please feel free to contact us. Four wins – The success modules of DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Būklė: geras (naudotas), Rėmai: 8860x1050x80 mm – 34 vnt. 3000x1050 mm – 7 vnt. Sijos: 1860x75x45 mm (2800 kg/lentynai) – 352 vnt. 2760x115x40 mm (2400 kg/lentynai) – 26 vnt. 2700x100x50 mm (2400 kg/lentynai) – 22 vnt. Galima įsigyti ir dalinius kiekius. Jei jums reikia lentynų ar priedų kitokių komplektacijų ar variantų, susisiekite su mumis. Siūlome platų naujų ir naudotų lentynų bei priedų asortimentą ir mielai padėsime Jūsų planavime. Individualus, Jūsų poreikiams pritaikytas pasiūlymas mums yra savaime suprantamas dalykas. Hfsdpfx Abod Hbqneveg Siuntimas: Prašome teirautis dėl siuntimo kainos, nurodydami savo pašto kodą, miestą bei pageidaujamą prekių kiekį.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolted system Hfsdpfxsh R Taqs Abveg Scope of delivery: - 9 rack uprights, height 4,230 mm, with foot section, usable depth 1,200 mm - 27 cantilever arms with a usable depth of 1,200 mm, equipped with deflectors - 9 roof supports with a projection of 1,500 mm, pre-drilled for customer-supplied roof construction (*Excludes timber purlins and trapezoidal sheets for roof construction) - Includes longitudinal and diagonal bracing for 1,500 mm upright spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts re-orderable and extension possible at any time) - (*Available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components’ surfaces are hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (max. snow load 1.85 kN/m², wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (max. snow load 1.85 kN/m², wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, 1,200 mm deep, with deflectors = 4 storage levels above each other - Including longitudinal and diagonal bracing with 1,500 mm axle spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load labels C4 in accordance with DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight service with advance delivery notification. Material is packaged for ease of unloading. The foundation must be concrete, level, suitable for doweling, and capable of bearing all imposed loads. Floor conditions and load-bearing capacity as well as any necessary official permits are to be checked and ensured by the customer. The uprights must be anchored to the floor by the customer; wall anchoring is neither required nor recommended. According to trade association guidelines, uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever racking in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 racking uprights, height 4,200 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) (*Delivery or collection in approx. 1–2 weeks) (*No paint damage!) (*No damaged components!) (*Spare parts and expansions available on request at any time) (*Offer also available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed Description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Height adjustable cantilever arms in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 740 kg - Including longitudinal and diagonal bracing for 1,300 mm upright distance Hedpfomhhypjx Abvefg - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with pre-delivery notification. The material is packed for efficient and easy unloading. Delivery can take place approx. 1–2 weeks after receipt of order. When installing outdoors, the load capacity must be reduced according to wind and snow loads. The substrate must be concrete, level, suitable for anchors, and capable of bearing the imposed loads. The customer is responsible for inspecting and ensuring the ground condition, load-bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to trade association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Racking Used: Bolted System, Hot-Dip Galvanised Version Scope of delivery: - 4 upright frames, height 3,500 mm with base foot section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including horizontal and diagonal braces for 1,300 mm frame spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available for larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes horizontal and diagonal bracing for 1,300 mm frame spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Telephone expert advice - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. Materials are sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. Hjdjmhh Dhopfx Abvefg The subfloor must be concrete, level, suitable for dowel fixings, and capable of bearing the resulting loads. Customers are responsible for checking and ensuring ground conditions, load capacity, and any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is advised that uprights have at least a 500 mm overhang of the top storage level above the upright’s top edge.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available at any time and system can be expanded - Larger quantities available: approx. 40 uprights in stock Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Professional telephone support - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance delivery notification. The material is packed in a way that allows easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level and dowel-able, and able to support the applied loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least 500 mm of overhang above the top storage level. Hfodpfx Abjmhh Dzsvjg

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolt system in hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions can be reordered at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE sections (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with pre-delivery notification. The material is packed for easy unloading. For outdoor installation, the load capacities must be reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowelling, and capable of absorbing the acting loads. Floor condition and load-bearing capacity, as well as any required official approvals, must be checked and ensured by the customer. Hfsdpfx Absfdkb Tjvog The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to trade association recommendations, the rack uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 3,000 mm with base section, usable depth 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) Hfjdsmhh Anepfx Abvsg - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively produced in Germany. We provide reliable shipping with advance notice before delivery. The material is well packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The flooring must be concrete, level, and suitable for dowels, and able to absorb the acting loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever rack, painted version (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 2.56 m, with base section, 1.0 m usable depth (1.2 m total depth) - 12 cantilever arms, 1.0 m usable depth - Longitudinal and diagonal bracing for 4 m rack length (spacing 1.3 m) - Fastening material (bolts, nuts, and washers) (*No paint damage!) Net price for pickup: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolt-in system) Hodpfxsguk A He Abvefg - Surface painted according to RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per frame: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per frame as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight shipping with advance notification before delivery. The material is packed efficiently to enable easy unloading. The subfloor must be made of concrete, level and suitable for anchoring, and capable of bearing the applied loads. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and obtaining any necessary official permits. Rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to German professional association guidelines, it is recommended that the upright frames extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever rack used: Bolted system in hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with foot sections 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total racking length = 4,000 mm - Including fastening material (without floor anchors) - Comes with assembly instructions and C4 load labels according to DIN standard - Expert consultation by phone - Made in Germany - Short delivery times Hodpfxeguk Dkj Abvjfg - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice prior to delivery. Material is well-packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for doweling, and capable of bearing the loads involved. The client is responsible for ensuring the condition and load-bearing capacity of the floor as well as obtaining any necessary official permits. The rack uprights must be anchored in the floor on site—a wall anchoring is neither required nor recommended. According to professional association recommendations, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack with Roof Supports: Hot-dip Galvanised Bolted System Scope of Delivery: - 9 upright frames, height 4,230 mm with base segment, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflectors - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excludes timber purlins and trapezoidal sheets for the roof) - Includes longitudinal and diagonal bracing for 1,500 mm frame spacing - Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension possible at any time) - (*Offer for larger quantities available: approx. 50 uprights in stock) Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanised - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright has 3 bolted cantilever arms with 1,200 mm depth, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing with 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With installation manual and load capacity signs C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on-site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable deliveries with pre-arranged notification. Hfsdpjmhhy Nefx Abvsg The material is sensibly packaged for easy unloading. The foundation must be concrete, level, and suitable for dowel anchoring and must be able to absorb the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 4,160 mm Hfedemhh Dtepfx Abvog - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standards - Expert technical advice by phone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with advance notification before delivery. Materials are packaged sensibly to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for anchoring, and capable of supporting the applied loads. The client is responsible for checking and ensuring ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the trade association, it is recommended that the rack uprights have an overhang of at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack Used: Bolt-together System in Hot-dip Galvanized Version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm effective depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification prior to delivery. The material is sensibly packed to allow for easy unloading. Hjdeguk Dvjpfx Abvsfg When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for doweling, and must be able to absorb the acting loads. Floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the employers’ liability insurance association, it is recommended that the uprights feature a minimum 500 mm overhang above the top storage level.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, META CLIP lentynų sistema Cinkuota, aukštos kokybės. Rėmo aukštis: 200 cm Lentynos gylis: 40 cm Lentynos plotis: 100 cm Lentynos apkrova: 100 kg Lentynų aukštis su klipų sistema visiškai lanksčiai reguliuojamas Iš viso yra 25 metrai. Kaina už 2 rėmus, 6 lentynas – 119 € Pridedama lentyna: 1 rėmas, 6 lentynos – 79 € Skersinės atramos įskaičiuotos. Pageidaujamą ilgį ir lentynų kiekį galime pasiūlyti pagal užklausą. Hfjdpfx Abey D S Afjvjg

Būklė: geras (naudotas), Kiekvienos lentynos stiklo padėtis: 65 mm Maksimalus stiklo aukštis: 1680 mm Plotis: 1500 mm Gylis: 2600 mm Hedpfsyx Uf Ssx Abvjfg Aukštis: 2060 mm Būklė: Geras, naudotas

Būklė: geras (naudotas), Konsolinė lentyna, sunkių krovinių lentyna, vienpusė konsolinė lentyna, padėklų lentyna Hfedeyu Um Tspfx Abvog - Konsolinė lentyna: dvipusė, aukštis 4000 mm - Stovai: 5 vnt. 340/150/H4000 mm / 350/300/3400 mm - Konsolinės sijos: 70 vnt. 140/140/1500 mm - Skersinės sijos: 124 vnt. 60/40/1350 mm - Atidavimas/kaina: pilnas komplektas - Svoris: 4100 kg

Gamybos metai: 2007, būklė: geras (naudotas), 930 USED shop oven, confectionery oven, deck oven, electric. TECHNICAL DATA - number of baking chambers: 4, - each chamber equipped with steam option, - equipped with: proofer, hood. Hedju Ra A Espfx Abvjfg EXTERNAL DIMENSIONS (in cm): - width: 98, - height: 221, - depth: 98 (with hood: 120). CHAMBER DIMENSIONS (in cm): - width: 60, - depth: 48, - height: 14. The device is ready for inspection and is located in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / installation / commissioning. The stated price is net. WE SPEAK ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN. More information: Witold +48 508-195-853