Vandens Ištirpusios Medžiagos Surinktuvas pirkti naudotą (6 283)

Būklė: naudotas, Mitre Cold Circular Sawing Machine Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of Manufacture 1983 Saw Blade Diameter: 400 mm Cutting Capacity at 90° Round: Ø 130 mm Cutting Capacity at 90° Square: 120 x 120 mm Cutting Capacity at 90° Rectangle: 305 x 20 mm Cutting Capacity at 45° Round: Ø 130 mm Cutting Capacity at 45° Square: 110 x 110 mm Cutting Capacity at 45° Rectangle: 245 x 30 mm Clamping Range, Vice Feed: 30 to 140 mm Working Height: 1000 mm Mitre Cutting: 0 - 180° Feed Travel: 600 mm Saw Blade Speed: 10 + 20 m/min, 2 stages Motor Power: 1.7 and 2.6 kW Hydraulic Motor: 1.5 kW Electrical Connection: 380 Volt, 50 Hz Guodpfxed N H A Ne Ap Ioc - Hydraulic material vice feed with 1500 mm infeed roller conveyor on the left - Dual-stage feed travel up to 1200 mm (feed twice, then saw) - Hydraulic material clamping with vertical clamping cylinder - Mitre cut – saw angle adjusted manually - Hydraulic feed control, cutting speed adjustable manually - 2 motor speeds for saw blade speed - Infinitely adjustable saw blade stroke - Coolant system with electric pump integrated in machine base - Hydraulic unit fixed on the base machine - Piece counter with zero reset Space requirement of saw: 2600 x 1200 x 1900 mm Weight of saw: approx. 1400 kg In good condition

Būklė: naudotas, Cooling Unit Water Cooling Recooler ARO Type VWK 31/1-S Serial No. Year of manufacture 2007 Cooling capacity 3500 Watts Ambient temperature max. 32°C Refrigerant R407C Refrigerant charge 0.98 kg Operating overpressure, refrigeration compressor max. 29.5 bar Water tank capacity approx. 8 liters Circulation pump flow rate 27 liters/min. (1620 liters/h) Water connections Quick-release coupling Rectus Type 26 Power supply 230 Volts, 50 Hz, 2.2 kW - Temperature setting via DANFOSS thermostat controller - Built-in circulation pump (250 Watts) Required space (L x W x H) 700 x 550 x 520 mm Gjdpfx Apovw A T No Iouc Weight 75 kg Good condition

Būklė: naudotas, Column-guided semi-automatic bandsaw METORA - KALTENBACH Type HMB 380 DS Only for 90° cuts (Made in Austria) Machine No.: 4580028 Year of manufacture: approx. 1993 Cutting capacity round: Ø 380 mm Square: 380 x 380 mm Saw blade dimensions: 5650 x 34 x 1.1 mm Saw blade speed: 25–108 m/min, infinitely variable Material infeed height: 870 mm Gujdpfxedzqtgo Ap Ijc Hydraulic drive power: 1.5 kW Saw motor power: 4 kW Power supply: 400 Volt, 50 Hz - Fully hydraulic bandsaw with dual-column design - Hydraulic lowering of the saw bow with stepless cutting pressure adjustment - Lowering speed continuously adjustable - Hydraulic vise clamping with hydraulic bundle clamping from above - Hydraulic unit integrated in the machine base - Material feed roller on the infeed side with geared motor (not mounted on the machine frame) - Coolant system with coolant pump for water emulsion - Minimum quantity lubrication for the saw blade - Electric heating cartridge for coolant and hydraulics - Length stop TRENNJAGER Type EX-Stop1, with handwheel adjustment, digital display and hydraulic stop carriage clamping Stop system length: 6750 mm, stop travel: 5650 mm, stop arm hydraulically foldable Without roller conveyor Space requirement of the main machine (L x W x H): 2800 x 1400 x 2450 mm Machine weight: approx. 3 t Weight of the stop system: approx. 800 kg Good condition

Būklė: naudotas, Strip straightening machine for coil material WANZKE Type RG 400-7 Strip processing line for coil handling Ref. No.: 1349-6 Year of manufacture: 1983 Nominal strip width: 400 mm Roll width: 408 mm Strip thickness: max. 2 mm Strip cross-section: max. 600 mm² Roll width – straightening rolls: 408 mm Gsdpfx Aexw Rcuop Ijuc Number of straightening rolls at top: 3 pcs (non-driven) Number of straightening rolls at bottom: 4 pcs (driven) Straightening roll diameter: 50 mm Feed rolls: 2 pcs Ø 50 mm (bottom roll driven) Feed roll width top: 390 mm Feed roll width bottom: 408 mm Strip speed: approx. 5 – 45 m/min Motor power: 1.1 kW Power supply: 230 Volt, 50 Hz - Infinitely variable straightening speed via DC motor with DC controller - Drive via gear motor and chain - Loop control system with speed regulation and 2 speed settings - Top roller frame adjustable via 4 handwheels - 4 dial gauges for fine adjustment - Mechanical opening of top rollers via eccentric lever - Adjustable side strip guide on infeed side - 2 roller baskets for strip guidance - Electrical diagram available Space requirements for straightening machine with control system (L x W x H): 1200 x 800 x 1600 mm Weight: 620 kg Good condition

Būklė: naudotas, Strip Processing Line – Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm – Very well-equipped, with introduction aids Space requirement for complete line (L x W): approx. 7000 x 3000 mm Total weight of the line: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, maximum pass: max. 455 mm Strip thickness at 400 mm width (steel): max. 1.5 mm Strip thickness at 400 mm width (copper): max. 2 mm Speed: max. 40 m/min Number of straightening rollers: 7 pcs Straightening roller diameter: Ø 40 mm Number of feed rollers: 2 pcs Feed roller diameter: Ø 80 mm Entry/throughput height: 1500 mm – Straightening rollers hardened, ground, and hard-chromed, with central support – Feed rollers hardened, ground, and hard-chromed, with hydraulic lift – Manual straightening roller adjustment – Introduction aid with hydraulically extendable tongue and hydraulically adjustable deflector roller – Adjustable lateral strip guide – All straightening rollers driven via distributor gearbox with cardan shafts – Both feed rollers driven via gearbox with cardan shafts – Frequency-controlled drive via geared motors – Straightening machine opening stroke 250 mm for system cleaning or feeding thicker material, lifting movement via trapezoidal thread spindle – Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with loading saddle) Coil outside diameter: max. 2000 mm (without loading saddle) Guedpfjif Sg Sex Ap Ioc Diameter of coil support disc: Ø 1700 mm Coil inside diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Width of expansion jaws: 750 mm Height of decoiler drum above base plate: 1500 mm – Decoiler drum drive via hydraulic motor and gear – Pneumatic overrun brake on decoiler drum (TWINFLEX) – Hydraulic expansion of decoiler drum, centrally via wedge slide system – Hydraulic pressure arm with hydraulically powered double pivoting roller – Coil loading saddle with 12 t lifting capacity and 300 mm lift – Decoiler in above-floor frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Unit (separate) Tank capacity: 350 liters Drive power: 18.5 kW – Drive motor with 2 REXROTH pumps (tandem pump) – Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Control Cabinet (separate) – All cable connections plug-in via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Būklė: naudotas, rida: 492 396 km, galia: 375 kW (509,86 AG), pirmoji registracija: 01/2023, kuro tipas: dyzelinas, bendras svoris: 18 000 kg, ašių konfigūracija: 2 ašys, spalva: balta, pavaros tipas: automatinis, emisijos klasė: Euro 6, Įranga: ABS, autonominis šildytuvas, navigacijos sistema, oro kondicionavimas, suodžių filtras,

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, veikimo valandos: 1 400 h, X ašies eiga: 3 000 mm, Y ašies eiga: 2 000 mm, Parduodama MicroStep WaterCut 2001.30W vandens pjovimo staklės, puikios būklės, pagamintos 2023 m. Įrenginys komplektuojamas su aukšto slėgio siurbliu BFT Ecotron 40.37 – 4000 bar ir 37kW, kuris yra vienas našiausių ir patikimiausių siurblių rinkoje. Gjdpfx Apoy Ecr Hj Iouc Pagrindinės specifikacijos: - Darbinis plotas: 2000 x 3000 mm - Pjovimo galva: 3 ašių su apsaugos nuo susidūrimo jutikliu - Bendras darbo valandų skaičius: apie 1400 h Įrenginys parduodamas kaip pilnas, paruoštas naudojimui komplektas, įskaitant: - 1 t abrazyvų tiekėją (Allfi) - Automatinę dumblo šalinimo sistemą (rezervuaro valymo sistema) Tokia komplektacija leidžia pradėti gamybą iš karto, be papildomų investicijų. Įrenginys prieinamas iš karto.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2022, The Matest C313N is a laboratory freeze-thaw and climate chamber primarily used for building material testing – particularly for investigating the behavior of concrete, cement, aggregates, and other materials under various temperature and humidity conditions. Gusdpfx Aoy R D D Usp Ijc Main applications: - Simulation of freeze-thaw cycles (e.g., testing concrete samples for resistance to thermal stress). - Durability testing of construction materials according to standards (e.g., EN 1367-1). - Execution of accelerated aging and climate tests under various environmental conditions. Features: ✔ Control of two parameters: temperature and humidity. ✔ Temperature range: approx. -30 °C to +70 °C. ✔ Humidity range: 20–95% (±1% accuracy within relevant temperature range). ✔ Programmable cycles: up to 50 programs and 100 segments adjustable. ✔ 5-inch color display: real-time clock and optional data recording via PC connection. ✔ Stainless steel inner and outer housing: for long service life. Areas of application: - Freeze-thaw testing of concrete and building materials: demonstrates how the material cracks or is damaged by thermal cycles. - Quality control of building materials under laboratory conditions. - Environmental and climate tests requiring precise control of heat and humidity.

Gamybos metai: 2010, būklė: naudotas, Funkcionalumas: ribota funkcionalumas, 1 vnt. naudotas drėgno vandens centras Gamintojas: technotrans Modelis: delta.d 250w Pagaminimo metai: 2010 Ex-Rotoman Godpfx Apoy Uc Slo Iouc Ekranas pažeistas, kitaip pilnai veikiantis. Yra atsarginis ekranas remontui, kitaip tinka ardymui (siurbliai, elektronika, Digidos ir kt.). Taip pat prieinamas atitinkamas Spinclean agregatas.

Būklė: naudotas, rida: 684 672 km, galia: 338 kW (459,55 AG), pirmoji registracija: 05/2019, kuro tipas: dyzelinas, bendras svoris: 20 500 kg, ašių konfigūracija: 2 ašys, kita apžiūra (TÜV): 06/2028, stabdžiai: retarderis, spalva: žalia, pavaros tipas: automatinis, emisijos klasė: Euro 6, Gamybos metai: 2019, Įranga: ABS, autonominis šildytuvas, oro kondicionavimas,

Būklė: naudotas, rida: 743 811 km, galia: 368 kW (500,34 AG), pirmoji registracija: 05/2019, kuro tipas: dyzelinas, bendras svoris: 18 000 kg, ašių konfigūracija: 2 ašys, kita apžiūra (TÜV): 12/2026, stabdžiai: retarderis, spalva: balta, pavaros tipas: automatinis, emisijos klasė: Euro 6, Gamybos metai: 2019, Įranga: ABS, autonominis šildytuvas, elektroninė stabilumo programa (ESP), oro kondicionavimas, suodžių filtras,

Būklė: naudotas, Water degassing (deaeration) unit for the removal of oxygen from drinking water, predominantly built in 1995. The system operates using a two-stage cold degassing process via CO2 counterflow stripping and consists of the following components: - 2 degassing vessels connected in series - Vacuum pump with separator - 7,000 L (70 hl) pressure tank (Gross, 2018) for storing degassed water at up to 4 bar overpressure - Centrifugal pumps - CO2 dosing via needle valve - Pipe panel, various pipelines, valves, fittings, measurement and control technology - Control cabinet with Simatic S5 control system Machine (addition): Cold degassing by CO2 stripping; Years of construction: 1995 - 2018 Capacity: 20,000 l/h Degassing vessel content each: 285 L; Operating pressure up to 1 bar Buffer tank volume: 7,060 L; Operating pressure up to 4 bar Residual oxygen content approx.: 0.010 - 0.015 mg/l Operation / control: Simatic S5 Material: Stainless steel Mounting / placement: Mounted on walkable stainless steel frame Features: 2 x degassing vessels; pressure tank; centrifugal pumps; vacuum pump with separator; CO2 dosing (via needle valve); flow, pressure, and level measurement; control cabinet; pipe panel; various pipelines, valves, and fittings. Gusdjy Ti Anspfx Ap Isc

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Gamintojas: Sennebogen Gsdpozatgvefx Ap Ieuc Pagaminimo metai: 2012

Būklė: naudotas, rida: 487 906 km, galia: 335 kW (455,47 AG), pirmoji registracija: 03/2020, kuro tipas: dyzelinas, didžiausias leistinas svoris: 10 470 kg, bendras svoris: 18 000 kg, ašių konfigūracija: 4x2, ratų bazė: 3 850 mm, stabdžiai: retarderis, spalva: kitas, vairuotojo kabina: kitas, pavaros tipas: pusiau automatinis, emisijos klasė: Euro 6, pakaba: oras, Gamybos metai: 2020, Įranga: autonominis šildytuvas, borto kompiuteris, hidraulika, kruizo kontrolė, navigacijos sistema, oro kondicionavimas,

Būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, This single-sided heavy-duty cantilever racking system is ideal for storing heavy long goods such as pipes, profiles, metal rods, steel beams, wooden strips, and sheet material. With an overall length of approx. 13.20 linear meters, a height of approx. 4.00 m, and cantilever arms measuring approx. 120 cm, the racking provides a high storage capacity across a total of 4 storage levels (base level + 3 tiers). Each cantilever arm supports up to 500 kg, and each upright has a load capacity of up to 2,250 kg. The cantilever arms are bolted and their height can be flexibly adjusted in 200 mm increments thanks to a perforated upright grid. The fully hot-dip galvanized finish ensures long-lasting protection for both indoor and outdoor use – New item available ex-stock Wietmarschen. PRODUCT DETAILS: - Rack type: Single-sided heavy-duty cantilever racking - Total length of racking row: approx. 13.20 m - Total height: approx. 400 cm - Arm length: approx. 120 cm (made from IPE 80) - Upright spacing (center-to-center): approx. 131 cm - Levels: Base level + 3 storage tiers - Load capacity per arm: max. 500 kg (with even load distribution) - Load capacity per upright: max. 2,250 kg (with even load distribution) - Upright profile: IPE 160, approx. 400 cm incl. base section - Upright hole pattern: approx. 20 cm spacing - First hole above base: approx. 107.5 cm (top of base) Godpszbkxrsfx Ap Ijuc - Top hole pair: approx. 50 cm below upright head (top of upright) - Design: Single-sided, bolted cantilever arms - Finish: Fully hot-dip galvanized - Availability: New SCOPE OF DELIVERY: - 11 x uprights, approx. 400 cm, IPE 160 incl. base, 20 cm hole pattern - 33 x cantilever arms, approx. 120 cm, IPE 80 (without deflector) - Includes all connecting elements - Includes all required bolts - 1 x load capacity sign Price: €5,750.00 net €6,842.50 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery throughout Germany by our partner forwarding agent – freight costs depending on postal code - Professional assembly and disassembly by trained teams available on request - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding offer tailored to your requirements. Whether it’s a new build, conversion or expansion – we offer expert advice for your racking configuration. Haven’t found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. Our telephone number can be found on our company page. We are available by phone Monday to Friday, 8:00 am – 4:00 pm. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Galingi trifaziai varikliai ir paprastas kampų bei frezavimo gylių reguliavimas daro WSK8-3 optimalia mašina jūsų nestandartinei gamybai. • Automatinis įjungimas paspaudus valdymo svirtis • Viršutinis frezavimo mazgas nuolat pasukamas iki 45° Gedjx U Ampspfx Ap Ieuc • Paprastas agregatų reguliavimas pagal skales ir ribotuvus • Lengvas reguliavimas skirtingoms profilių sistemoms

Būklė: naudotas, rida: 340 371 km, galia: 375 kW (509,86 AG), pirmoji registracija: 12/2022, kuro tipas: dyzelinas, bendras svoris: 20 500 kg, ašių konfigūracija: 2 ašys, kita apžiūra (TÜV): 06/2028, stabdžiai: retarderis, spalva: raudona, pavaros tipas: automatinis, Gamybos metai: 2022, Įranga: ABS, oro kondicionavimas,

Būklė: naudotas, Funkcionalumas: nepatikrintas, Sigmatek DDI 161 Guedpfx Apsy Uipwo Iec DTO 163 DCC 083 Procesoriaus modulis 05-700-082 Išvesties modulis AO 112 Wieland Gewaschen 200 Universal 600279

Būklė: naudotas, Gamybos metai: 1994, Funkcionalumas: nepatikrintas, Grindinis ištraukimas su ventiliatoriumi Kraštinis ištraukimas su ventiliatoriumi Tiekimo oro įrenginys 3102 WW, galia 75 kW Oro kiekis 10 500/5 250 m³/h Tiekimo oro sistema su tiekimo įrenginiu ir tiekimo lubomis (pakeičia ištrauktą orą) Tirpiklio garinimo įrenginys Priešgaisrinis sklendė Gsdeyuf S Hepfx Ap Ijuc Valdymas

Būklė: paruoštas naudoti (naudotas), darbinis plotis 4 metrai ventiliatoriaus variklio galia 4 kW komplekte kartoninis filtras ir paint stop filtras itališka gamyba elektrinis valdymo pultas avarijos mygtukas (STOP) filtravimo našumas 15 000 m3/h gamybos metai 2022 CE žymėjimas Gusdoy Nikkopfx Ap Ioc

Gamybos metai: 2019, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 149, For sale is an Ekochem WG400 water ring pelletizer including a WP200 centrifugal dryer, both in very good condition. Guedpfx Asy Av A Tsp Iec This system is suitable for pelletizing plastic melts and is particularly well-suited for applications involving PE, PP, and PS. However, other types of plastics can also be efficiently pelletized using this equipment. The WG400 water ring pelletizer is designed for reliable and continuous operation, enabling the production of uniform plastic pellets. The water ring process ensures a clean and efficient pelletizing operation. The unit has a throughput capacity of approximately 600 kg/h, but a higher throughput can be achieved by optimizing the parameters on the control panel. Water ring specifications: - Motor: 2.2 kW Siemens - 4-blade system - Max. 3,000 rpm blade speed - Heating power: 2.5 kW - Max. temperature: 300°C - Blades are pneumatically pressed against the die plate - All main system components are stainless steel Centrifugal dryer: - Motor: 4 kW - Motor speed: 1,500 rpm - 400 L stainless steel water tank - Water pump: 2.2 kW - Filtration: 25-200 μm - Heat exchanger: 2 m² - Filtration volume: 15 L We also offer a second water ring unit without a dryer at an additional price of €8,000 net. The machine is sold as inspected. Viewing by appointment is possible. Additional information, photos, and technical details are available on request.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, bendras svoris: 50 kg, galia: 1,1 kW (1,50 AG), bakelio talpa: 10 l, Medžiagų transportavimo įrenginys Simar FX 2504 Variklio galia: 1,1 kW (šepečinis variklis) Maitinimas: 230 V / 50 Hz Talpyklos tūris: apie 5 litrus Transportavimo našumas: apie 150 – 200 kg/val. (priklausomai nuo medžiagos) Maks. transportavimo atstumas: apie 15 – 20 metrų Vamzdžio / žarnos skersmuo: 38 mm (DN 38) Korpuso medžiaga: poliruotas nerūdijantis plienas Dažų dozatorius Simar FDX-2 Pavaros tipas: žingsninis variklis (dideli tikslūs kartotiniai apsisukimai) Maitinimas: 230 V / 50 Hz Apsisukimų greitis: tolygiai reguliuojamas (priklausomai nuo valdymo įrenginio, paprastai 0,1 – 200 aps./min.) Gjdpfoy Hlv Rex Ap Isuc Dažų talpyklos tūris: apie 5 – 10 litrų

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, galia: 1 kW (1,36 AG), Simar FX 2004 medžiagų tiekimo įrenginys Variklio galia: apie 0,9 – 1,1 kW (šepečių variklis) Energijos tiekimas: 230 V / 50 Hz Talpyklos tūris: apie 3 – 4 litrai Tiekimo našumas: apie 60 – 100 kg/val Žarnos jungties skersmuo: 38 mm (standartinis) Filtravimas: poliesterio filtras su automatiniu valymu Dažų dozatorius Simar FDX-2 Pavaros tipas: žingsninis variklis (didelis apsisukimų kartojimo tikslumas) Energijos tiekimas: 230 V / 50 Hz Apsisukimų dažnis: bepakopis reguliavimas (priklauso nuo valdymo bloko, paprastai 0,1 – 200 aps./min.) Dažų talpyklos talpa: apie 5 litrai Godpfx Apey Hldno Iouc

Būklė: geras (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, bendras svoris: 50 kg, galia: 1,1 kW (1,50 AG), bakelio talpa: 3 l, Variklio galia: 1,1 kW (šepečio variklis) Energijos tiekimas: 230 V / 50 Hz Godpfx Ajy Hk I Sjp Iouc Talpos tūris: apie 5 litrus Perkėlimo našumas: apie 150 – 200 kg/val. (priklausomai nuo medžiagos) Maks. perkėlimo atstumas: apie 15 – 20 metrų Vamzdžio/žarnos skersmuo: 38 mm (DN 38) Korpuso medžiaga: poliruotas nerūdijantis plienas

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2.23024635/4097, bendras svoris: 15 kg, įvesties srovės tipas: Oro kondicionierius, galia: 1 kW (1,36 AG), bakelio talpa: 10 l, Variklio galia: 1 kW Maitinimo įtampa: 230 V AC (+/- 10 %) Dažnis: 50–60 Hz Gujdpfxsy Hkyhs Ap Isc Talpos tūris: apie 10 litrų Pajėgumas: apie 10–120 kg/val. (priklausomai nuo medžiagos ir atstumo) Reikalingas suslėgto oro prijungimas: apie 5 bar (filtrų valymui/valdymui) Įrenginio svoris: apie 15 kg Medžiaga: nerūdijantis plienas