Vamzdis Vizuoti Pradininkas pirkti naudotą (1 441)

Būklė: naujas, Gamybos metai: 2026, Motor: 4 kW Belt speed: 30 m/s, 2800 rpm Belt dimensions: 100×2000 mm / 150×2000 mm Grinding diameter: Ø20–Ø114.3 Grinding angle: 20–90º Gjdjxyyxwspfx Aa Uobl Operation: Lever and manual wheel operation Weight: 260 kg Easy to operate The AL150 can be operated by means of two handwheels or a lever. Both options are available on the machine. The AL150 allows you to notch material from Ø20 to Ø114.3. The cross support and the carriage with rotating clamp are infinitely adjustable. This means that all pipe profiles can be ground at any desired angle from 20° to 90°. The AL150 by ALMI grinds square, rectangular, and round tubes with various wall thicknesses and is suitable for all common materials. The ALMI belt adjustment system now makes it even easier to adjust the grinding belt with the supplied hex key. The grinding belt can be quickly tensioned and the grinding rollers can be changed in just a few seconds. 2-in-1 tube notcher The AL150 is equipped with a deburring table that makes it easy to deburr the tubes, making the tube notcher multifunctional.

Būklė: naujas, Gamybos metai: 2026, Motor: 4 kW Voltages: 230V 3-phase, 400V 3-phase, or 460V 3-phase Belt speed: 45 m/s, 4300 rpm Belt dimensions: 100×2000 mm / 150×2000 mm Grinding diameter: Ø20–Ø114.3 mm Grinding angle: 20–90º Operation: Lever and manual handwheel operation Gsdpfjxyyx Djx Aa Usbl 2-in-1 Pipe Notcher The new AL150HS features a belt speed of 45 m/s thanks to its unique gearbox. When the tailgate is opened, the pipe notcher can also be used as a belt grinder, making it ideal for deburring polished profiles. The AL150HS can be operated with two handwheels or with a lever—both options are available on the machine. With the AL150HS, you can notch materials from Ø20 to Ø114.3 mm. The cross support and the carriage with swiveling clamp are infinitely adjustable, allowing all tube profiles to be ground at any required angle from 20° to 90°. With the AL150HS from ALMI, you can process square, rectangular, and round tubes with various wall thicknesses and all common materials. The ALMI belt adjustment system makes it even easier to set the grinding belt using the supplied hex key. The grinding belt can be quickly tensioned and the contact wheels can be changed within seconds. High-speed Notching Thanks to recent developments, ALMI has been able to achieve a grinding speed of 45 m/s with the redesigned AL150HS. This results in longer belt life since faster grinding generates less heat in the material, causing less discoloration and less fine dust.

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: Pro Coil E-18/9, Thermaflex ThermaSmart PRO Coil E-18/9, thermal pipe insulation in box. Gedpfxjw Hzu Ao Aa Ujbl Lot of 65 boxes. Diameter: 18 mm Thickness: 9 mm Length: 23 m

Gamybos metai: 2003, būklė: labai geros būklės (naudotas), KUAG Pipe Haul-off RA 110 3+3 E with 6 caterpillar tracks Year of manufacture: 2003 Number of caterpillar tracks: 6 Diameter range: Min 20 mm, Max 170 mm Haul-off speed: 0.2 - 10 m/min Godpfx Aaep Analo Ujbl Condition: Very good, fully operational The haul-off is my property Hablamos español Nous parlons français We speak English Sachal Extrusion Machines D-26345 Bockhorn-Grabstede Germany

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 26 407 h, Funkcionalumas: visiškai funkcionalus, Siūlome parduoti pilnai automatinę diskinę pjūklą BLM Group ADIGE EM80, tinkamą tiksliam vamzdžių ir profilių pjovimui serijinėje gamyboje. Įrenginys aprūpintas CNC valdymu Siemens Sinumerik ir automatine medžiagos padavimo sistema, leidžiančia efektyvią ir pakartojamą gamybą. Techniniai duomenys: Pagaminimo metai: 2015 Valdymas: Siemens Sinumerik Galia: 38 kW Įtampa: 380 V / 50 Hz Svoris: apie 8 500 kg Darbo valandos: apie 26 400 h Gbjdpfxsy A Nyxo Aa Uol Pjovimo diapazonas: vamzdžiai Ø 10–80 mm Maks. ruošinio ilgis: 600 mm Idealu trumpų detalių serijinei gamybai Komplektacija: automatinė padavimo sistema pilnas įrenginio apdangalas daugiavietė įrankių pozicija spaustuvų komplektas (žr. nuotraukas) Greitaeigė, didelio našumo pjūklas, tinkamas serijinei gamybai ir užtikrinantis aukštą produktyvumą bei pjūvio tikslumą. Galimybė išbandyti įrenginį pagal susitarimą.

Būklė: naudotas, 1 vnt. metalo diskinis pjūklas PEDRAZZOLI ant padėklo Spalva: kaip parodyta, pagal nuotraukas ir apžiūrą Būklė: naudotas Gsdsy D I U Dopfx Aa Usbl Sandėliavimo vieta: sandėlio salė Apmokėjimo būdas: išankstinis apmokėjimas bankiniu pavedimu Pristatymas: tik atsiimant pačiam iš vietos Ditzingen-Heimerdingen

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, bendras plotis: 913 mm, bendras ilgis: 634 mm, bendras aukštis: 1 700 mm, garantijos trukmė: 12 mėnesiai, suslėgto oro jungtis: 6 juosta, bendras svoris: 200 kg, galia: 1,9 kW (2,58 AG), įėjimo įtampa: 230 V, Pusiau automatinė tūbelių pildymo mašina. Našumas iki 13 tūbelių per minutę. Dozavimas nuo 5 ml iki 270 ml Tūbelės skersmuo nuo 19 mm iki 50 mm Tūbelės aukštis nuo 70 iki 210 mm Pagaminta Lenkijoje Gjdpfx Aaoxx Uihj Usbl Mašiną galima apžiūrėti ir išbandyti įmonės patalpose. Jedliński Packaging sp. z o.o. ul. Wodna 3 05-090, Raszyn Lenkija

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, bendras plotis: 900 mm, bendras ilgis: 2 020 mm, bendras aukštis: 1 000 mm, plieno lakšto storis (maks.): 1 mm, lakšto storis 0,35 - 1,2 mm, gamybos matmenys 125 mm - 1250 mm, variklio galia 2x 1,5 kW, darbo greitis 24/10 aps./min, šaltuoju būdu apdirbtas plienas ir cinkuotas plienas, alkūnių gamyba Ø 200-1000 mm, tiesių vamzdžių gamyba Ø 200-1000 mm, komplekte - kreipiančiosios ir atsarginiai ratukai. Kainos be PVM. Gsdpfxeymcvto Aa Usbl

Gamybos metai: 2025, veikimo valandos: 1 h, būklė: naujas, Funkcionalumas: visiškai funkcionalus, nominali galia: 5,5 kW (7,48 AG), Vamzdžio skersmuo (maks.): 1 600 mm, sukimosi greitis (atstumas/laikas): 36 000 mm/min, maks. lakšto storis: 2 mm, vario lakšto storis (maks.): 1 mm, plieno lakšto storis (maks.): 1 mm, nerūdijančio plieno lakšto storis (maks.): 1 mm, Įranga: avarinis stabdymas, dozatorius, HVAC – Spiralinių vamzdžių (SPIRO) gamybos staklės iš lakštinio metalo, ilgis 120–8000 mm, juostos plotis 137 mm, lakšto storis: cinkuotas 0,4–1,2 mm / nerūdijantis plienas 0,4–0,8 mm / aliuminis 0,5–1,5 mm / varis 0,5–1,2 mm, greitis 1–36 m/min, PLC, pjovimas diskiniais pjūklais (4 kW), pagrindinė galia 5,5 kW. Šios staklės – gamybos širdis: ima juostą ir sparčiai gamina spiralinį vamzdį. Spiro vamzdžių skersmuo 80–1600 mm. Pridedami atsarginiai kreipiamieji ratukai ir juostelės skirtingiems vamzdžio skersmenims. Daugiau informacijos mūsų svetainėje. Nuotraukose įranga transportavimo būsenos. Gbsdpfx Aajykpb Rs Usl

Būklė: paruoštas naudoti (naudotas), GASTEC detektoriniai vamzdeliai tiesiogiai rodo koncentracijas pagal ant vamzdelių atspausdintą sukalibruotą skalę. GASTEC siekiame užtikrinti aukščiausios kokybės detektorinius vamzdelius, skirtus ore esančių dujų/garų ir teršalų dirvožemyje bei vandenyje analizei, pasitelkdami pažangią mokslinių tyrimų ir plėtros bazę. Dėl pastangų įgijome tvirtą reputaciją tarp klientų beveik visose pramonės, komercijos ir visuomenės srityse. Vamzdeliai dabar prieinami daugiau nei 500 skirtingų pritaikymų. Godsy D D Tcopfx Aa Ujbl

Gamybos metai: 2017, būklė: naudotas, Serijos Nr. 15-6139B, CNC valdymas su lietimui jautriu ekranu, taktinis padavimo konvejeris, robotas, gamintojas Yaskawa, tipas YR-MH00012-A00, pagaminimo metai 2011, roboto valdymas DX200, Teach-In terminalas, dėžių išdavimo linija, ilgis 7 000 mm, valdymo/skirstymo spintos, plexiglas apsauga, periferiniai įrenginiai, mašinos priedai Gbjdpfx Ajy A In Uea Uol Pasiliekama teisė į ankstesnį pardavimą.

Gamybos metai: 2016, būklė: naudotas, Serial no. 15-3599B, consisting essentially of: feed station with 2 product lanes, continuous cycle conveyor belt, 2 forming stations, turning station, micro-lubrication station, continuous washing system, manufacturer Bous, type Duwamat K1000 WSST, year 2016, serial no. 2800, 3 tanks, tank capacities: 485/485/715 l, heating power 16–24°C, fine filter, oil separator, control cabinets, system control with operator panel, manufacturer Siemens, type SIMATIC HMI touch, inspection system with 2 cameras, manufacturer KEYENCE, type Vision System, eddy current tester, manufacturer Rohmann, type Elotest IS500, laser marking system, manufacturer Videojet, type 7510, fiber laser, laser power 50 W, output station, roller conveyor system for crate discharge, 2 product lanes, satellite terminals, control cabinets, safety devices, Plexiglas enclosure, peripheral units, e.g., extraction system, manufacturer ESTA, type Whispersog 2.2 JET, union nut feeding with feed hopper, vibratory bowl feeder, separating device, insertion station, batch of trolleys, batch of load carriers, trolleys. Subject to prior sale. Gjdpfjy A Ih Usx Aa Usbl

Būklė: naujas, Gamybos metai: 2026, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries to right or left bending. The plug-in bending tools enable rapid changeover to different tube sizes. Fast hydraulics to reduce non-productive time is an important factor for series production. The clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick as required) with data storage and the latest X2X interface can store an almost unlimited number of programs for bend angles, length measurements, and rotation angles for up to 50 bending sequences on one tube length. To monitor springback values, there is a freely programmable database for up to 200 materials. The machine has 2 operating modes: In "Simple Bending", the length and rotation of the arcs relative to each other are automatically displayed. In "Controlled Bending" mode, the data is entered beforehand, and during bending a continuous actual/target comparison occurs. This ensures mispositions within a tolerance window are eliminated, minimizing user-related error rates. General error messages are displayed in full text on the large screen. Mandrel retraction is programmable and can be automatically withdrawn early once the bend angle is reached. The compact drive unit with detachable mandrel holder offers advantages for use on-site as well as for special applications with very large tube feed and is also available as a stationary version with an organization system for tools and mandrel rods. The affordable alternative to fully controlled CNC machines. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering, e.g., chemical industry • Metalworking • Prototype construction • Technical Data: • Bending capacity Ø 6 to 50 x 4 mm, depending on material • Bend radius min/max: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control, bend angle setting (0.1°) • Mandrel holder lengths 1500/3000/4500/6000 mm (special versions available longer) • Maximum 180º bending result • Weight 800–900 kg (depending on configuration) • Ergonomic operation via safety foot switch Gbodong Exajpfx Aa Uel OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-release chuck • Positioning of length and rotation via automatic brake function or manual stops with foot switch • Automatic positioning of length and rotation via servo motors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for checking tool clamping force • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Welcome to test production in our demo room • Consultation and information session at your site • Consulting and handling of leasing/financing purchase through JUTEC • Trade-in of your current machine • Service contracts, maintenance at your location

Būklė: naujas, Gamybos metai: 2025, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries for both right-hand and left-hand bending. The interchangeable bending tools enable rapid changeovers to different tube sizes. Fast hydraulics to minimize non-productive times is a key factor for series production. Clamping pressure for tube securing is optimally adjustable. The PLC control (expandable via USB stick) with data storage and the latest X2X interface can store an almost unlimited number of programs for bending angles, lengths, and twist angles for up to 50 bending sequences on a single tube. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine offers two operating modes: In “Simple Bending,” the length and rotation of bends relative to each other are displayed automatically. In “Controlled Bending” mode, the data are input in advance, and a continuous target/actual comparison is made during bending. This excludes incorrect positioning within a specified tolerance window and thus minimizes user-related errors. General error messages are displayed in plain text on the large screen. The mandrel retraction is programmable and can be automatically retracted prematurely upon reaching the bending angle. The compact drive unit with removable mandrel support is advantageous for on-site assembly as well as for special designs requiring very long tube advance, and is also available as a stationary variant with an organized system for tools and mandrel bars. The cost-effective alternative to fully controlled CNC machines. POSSIBLE APPLICATIONS: • Hydraulic tubing • Pipeline construction • Plant construction, e.g. chemical industry • Metal fabrication • Prototype construction • Technical Data: • Bending capacity Ø 6 to 50 x 4 mm, depending on material • Bending radius min/max: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control, bending angle adjustment (0.1°) • Mandrel support lengths 1500/3000/4500/6000 mm (special versions available longer) • Maximum bending result 180º • Weight 600-700 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-action chuck • Length and rotation positioning via automatic brake function or manual stops by foot switch • Semi-automatic positioning of length and rotation via servo motors • Pneumatic rotary stop • Tube calculation software • Laser-assisted tool monitoring for checking tool clamping Godpfx Aajndn Agj Uobl • 10-inch touchscreen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Test production welcome in our in-house demo room • Consultation and information at your premises • Consulting and processing for leasing/financed purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Būklė: naujas, Gamybos metai: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal addition for pipe bending on models 3000 and 6000 is the PB20 profile bending attachment. The unit can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is securely clamped onto the rotary table using the clamping device and is bent around the bending tool. With this system, leg lengths to be bent can be precisely measured in conjunction with a length stop, ensuring repeatable accuracy in bending operations. TECHNICAL DATA: • Bending capacity steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edged tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° optional Gbsdpfsnh R Ekjx Aa Uol OUR SERVICE: • Test production welcome at our facility in the demo room • Consulting and information meeting at your location • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance available at your location

Būklė: naujas, Gamybos metai: 2025, THE HIGH-PERFORMANCE MOBILE BENDING MACHINE: The compact, mobile design enables precise and repeatable bending both stationary and directly at the assembly site, up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide robust drive force. The motor speed is automatically adjusted, resulting in rapid return motion and shorter cycle times. Position detection directly on the bending axis ensures optimal bending accuracy and extremely high repeatability. The bending angle can be set to 0.5° simply and quickly via push buttons. A large LCD display shows the angles clearly. The ability to store up to three bending angles allows efficient bending of tubes with different bending results. For transport, the compact unit with accessories can be safely and neatly stored in sturdy transport cases. The “stationary tube and rotating tool” principle ensures a minimal footprint during bending. Sliding shoes are used for thin-walled tubes to ensure wrinkle-free bends and to achieve arcs with minimal deformation, for example, in stainless steel and copper tubes. Using the PB20 profile bending attachment, flat, square, and round bar stock can be bent with ease. POTENTIAL APPLICATION AREAS: • Hydraulic piping • Prototyping • Plumbing and heating installation • Technical data: • Bending capacity: Ø 6 to 35 mm, CU Ø 42 mm, depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation is possible • 40 mm hex shaft for quick tool changes Gbedpenfvx Nsfx Aa Uel • Safety foot switch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency converter and three-phase motor • 3 programmable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • PB20 profile bender – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod base • Machine case • Tool case • Mini bending device KBV • Special tools as required OUR SERVICE: • Welcome for test production in our in-house demo room • On-site consultation and information session • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your location

Būklė: naujas, Gamybos metai: 2025, THE PRACTICAL HAND PIPE BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a bench vice. The drive is operated via a screw-in handle. A lockable adjustment ring ensures repeatable bending accuracy. The interchangeable tools can be replaced with minimal effort. The 'stationary pipe and rotating tool' principle allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, allowing bends in stainless steel or copper pipes with minimal deformation. The optional version with a hexagonal drive enables use in a vice as well as the possibility to use the drive power of the bending systems 3000 and 6000. The KBV can simply be mounted onto the bending shaft of the machine. POSSIBLE APPLICATIONS: • Hydraulic pipework • Prototype construction • Plumbing and heating installation TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limiter • Maximum bending result up to 180º OPTIONAL ACCESSORIES: Gbedpfx Aong Amkja Uol • KBV with hexagonal drive for bending on models 3000 or 6000 • Tool case • Length stop OUR SERVICE FOR YOU ON SITE: • Welcome to test production at our in-house demo room • Consulting and information meetings at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Būklė: naujas, Gamybos metai: 2025, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII For tube dimensions from 20 - 90 mm, this bending system provides solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD are also feasible for series production. With a tool height of 120 mm, there is ample room for special profiles. The highly precise and powerful electric drive of the bending axis, as well as the robust and rigid design of the mandrel carrier and bending arm, contribute to the desired bending result. The plug-in bending tools allow for quick changeover to other tube dimensions. The clamping pressure for tube fixation can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store an almost unlimited number of programs for bending angles, lengths, and rotation angles for up to 50 bending sequences per tube length. For monitoring the springback values, a freely programmable database for up to 200 materials is available. The control system offers two operating modes: In 'Simple Bending', the system automatically displays the length and rotation of the bows relative to each other. In 'Controlled Bending' mode, the data is pre-set, and a continuous target/actual comparison is performed during the bending process. Also available with pneumatic stop or with gear-assisted length and rotation positioning. APPLICATION AREAS: • Plant construction, e.g., chemical industry • Hydraulic piping • Metal construction • Prototyping • Pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm depending on material • Bending radius min/max: 40 mm/250 mm Gbjdpfxjnh R Suo Aa Uel • Minimum bending radius: 1.5 x Ø (standard 2 x Ø ) • Multifunction machine control for bending angle adjustment (0.1°) • Mandrel carrier lengths: 3000/4500/6000 mm • Maximum 180º bending angle • Weight: 1600-3200 kg (depending on model) • Ergonomic operation via safety foot switch OPTIONAL EQUIPMENT: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-release chuck • Larger bending radius up to 300 mm • Positioning of length and rotation via automatic brake function or manual stops with foot switch • Semi-automatic positioning of length and rotation via servomotors • Automatic tool retraction • Tube calculation software • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WiFi), or USB OUR SERVICE: • Welcome to test production at our facility in the demonstration room • Consultation and information meeting at your site • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 1018, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine, featuring a manual eccentric quick clamping system for tube fixing, allows for efficient bending operations. The compact drive unit with a detachable mandrel carrier provides advantages for use directly at the installation site. Position feedback directly on the bending axis ensures optimal bending precision. The bending angle is set quickly and easily via a user-friendly touchscreen control with a menu-guided interface. The comfort control enables two selectable speeds, as well as a parameterizable overbending function to compensate for material springback. The bending process is greatly shortened thanks to an automatic 'clear travel' at the end of the bend. For more complex bending tasks, programs can be stored, managing a sequence of up to 50 bends per geometry. An almost unlimited number of programs, as well as up to 200 materials, can be saved on the control unit or a USB stick. Plug-in bending tools allow for quick changeover to different tube sizes. For demanding geometries, the machine's bending direction can be easily changed to right- or left-hand bending as standard. The open bending unit enables, for example, the fabrication of railing frames with only one welding seam. Optional calculation software for the PC calculates the cut length for the entire geometry and determines the feed path, twist, and bending angle for each bend. The mandrel retraction is programmable and can be automatically withdrawn early upon reaching a certain bending angle. POSSIBLE APPLICATIONS: • Plant construction, e.g., chemical industry • Hydraulic piping • Prototype construction • Pipeline construction TECHNICAL DATA: • Bending capacity Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm/140 mm • Bending radii 2 x D • Multifunctional machine control with bending angle adjustment (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special versions longer available) • Max. 180º bend result • Weight 300-500 kg (depending on version) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital length and twist measurement (resolution 0.1) • Remote operation of all functions at the carriage (rotation and length stop) • Bending radius up to 250 mm • PC pipe calculation software OUR SERVICE: • Welcome to test production in our in-house demo room • Consulting and information sessions at your site • Consultation and processing for leasing/finance purchases via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance Gbjdpfx Aajnfvy Uj Uel

Būklė: naujas, Gamybos metai: 2025, THE PRECISE 3-ROLL BENDING MACHINE When developing this compact, mobile horizontal bending machine, the focus was clearly on producing dimensionally accurate spirals, such as handrails for spiral staircases. This is considered the supreme discipline, as two interdependent variables (radius and pitch) must be combined into a precise geometry in a single bending operation. The interplay of tube calculations on the PC, their implementation on the bending machine, and monitoring via measuring devices with final adjustment of bending values ensure accurate, precise bending. With just a few easy inputs into the PC tube calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for operating the machine. A new, powerful drive concept enables stepless adjustment of the bending speed, requiring only a 230 V (single-phase) power supply. Hardened steel tools and surface-friendly hard plastic tools are available. To ensure optimal feed even for tight bending radii, all three bending shafts are driven. The drive concept proves itself in demanding daily work, whether working on flat stock, bending tubes or profiles. Customers of the Bending System 4800, 5000, and 6000 can purchase the roll bending unit without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 systems via the bending shaft. In this case, the machines function as the drive unit. POSSIBLE APPLICATIONS: • Handrails/Intermediate rails for spiral staircases • Large tube and profile bends • General metalworking TECHNICAL DATA: • Bending capacity Ø 10 to 60 mm • Minimum bending radius: 300 mm at Ø 42.4 mm • Bending direction: right and left • Digital bending adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • Construction-site suitable 230 V connection • Weight: 280 kg OPTIONAL ACCESSORIES: Gbedsng A R Sepfx Aa Uel • Support roller – for stabilization • Lifting roller – for controlled pitch formation • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch via twist • MPW – PC-based calculation program for determining correct bending values • RB4303 – Universal bending tool for profiles up to 60 mm high • Tools for special profiles OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demo room • Consultation and informational meeting at your premises • Leasing/financing purchase options • Service contracts and on-site maintenance

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2000, Line for the production of round and rectangular tubes from black and stainless steel with diameters ranging from 20.0 mm to 70.0 mm and wall thickness from 0.5 mm to 3.5 mm. Other diameter ranges can be manufactured, provided that the appropriate set of rolls is produced. The tube or closed profile is formed by rolling a strip of suitable width and thickness using a set of rollers and subsequently joined by TIG welding. During production, it undergoes several processing operations, such as: a) weld seam grinding b) calibration c) straightening d) and cutting The finished “raw tube” product is further processed to achieve the desired surface finish. Two finishing processes are available: a) wet grinding using abrasive belts b) and/or dry polishing with polishing wheels and compounds. Gbedpfxjxmiiro Aa Uel CONSTRUCTION The profiling line is equipped with SAF automatic TIG welding technology: a) Tricathode NERTAMATIC 300 TR TIG Inverter, 2 units b) Tricathode NETRINOX TH 500 TIG Inverter, 1 unit c) Welding products with wall thickness 0.5 – 1.5 mm: E16 torch d) Welding products with wall thickness 1.5 – 3.5 mm: E25 torch e) RETRISAF cooling system 1.1 Coil-holder and decoiler for steel strip, so-called decoiler 1.2 Profiling stations: a) entry station b) pre-forming station c) main forming station 1.3 Welding segment – triple-electrode TIG welding heads in an inert gas (argon) atmosphere 1.4 Seam cleaning station 1.5 Calibration station 1.6 Straightening station 1.7 Flying saw – for cutting product to required length Additional elements of the line: 1.8 Bossi 4-section tube grinder Type: CPS 400x3000/4 Belt: 3000x150 mm 1.9 Bossi 2-section tube polisher Type: CP 400-2U

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, valdymo tipas: CNC valdymas, automatizacijos lygis: pusiau automatinis, pavaros tipas: elektrinis, Vielseitige Faserlaser-Metallrohrschneidemaschine – Die vielfältigen Funktionsmöglichkeiten ermöglichen den Einsatz der Laserrohrschneidemaschine in zahlreichen Rohrschneidprozessen. Die schlanke Düse ermöglicht es dem Laserrohrschneider, Interferenzen zu vermeiden und verschiedene Rohrtypen zu schneiden, darunter auch Sonderprofile wie H-Träger, P-Träger, I-Träger usw. Das Spannen der Schneidemaschine ist komfortabel, einfach und schnell – mit einer Spannzeit von nur 3 Sekunden bei hoher Wiederholgenauigkeit. Gbsdpshwrhbjfx Aa Ujl Durch die konstante Gasführung mit minimaler Turbulenz werden Schneidleistung und Effizienz gesteigert. Die BodorGenius-Technologie kombiniert mit dem blitzschnellen Einstechprozess ermöglicht das vollständige Einstechen während der Abwärtsbewegung auf der Z-Achse. Dank dieser Technologie ist ein Nacharbeiten beim Einstechen von mittel- und dickwandigen Blechen nicht erforderlich. Das Schneiden von Winkel- und U-Profilen ist serienmäßig möglich, zusätzliche Installationen sind nicht erforderlich. Optimierte Kantensuchmethoden und Algorithmen gewährleisten eine höhere Schnittgenauigkeit und verbesserte Stabilität des Laserschneiders. Zustand: Neu Lasertyp: Faserlaser Laserleistung: 1500W, 2000W, 3000W, 6000W Maximale bearbeitbare Rohrlänge: 6500mm/9200mm Futterantriebstyp: NC-Elektrofutter Unterstützte Grafikformate: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Mit CNC-Steuerung: Ja Kühlmodus: Wasserkühlung

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, užpildymo svoris (maks.): 50 g, pildymo svoris (min.): 1 g, bendras svoris: 50 kg, Dėl įmonės likvidavimo parduodama įvairi technika. Peržiūrėkite ir kitus mano skelbimus! . Gbedsy Ahifspfx Aa Uel Parduodamas specialiai pagamintas blizgučių miltelių dozatorius. Veikia puikiai. Turi kelias reguliavimo galimybes.

Būklė: geras (naudotas), Gamybos metai: 2002, 2019 m. gavo naują valdymo sistemą už 14 000 € maks. lenkimo skersmuo 63,5 mm Gjdpfxeykl Rze Aa Uobl mažiausias lenkimo spindulys 32 mm variklis 30 kW

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Minimalus plieninio vamzdžio skersmuo: 10 mm Maksimalus plieninio vamzdžio skersmuo: 76,5 mm Minimalus sienelės storis: 0,8 mm Maksimalus sienelės storis: 5 mm Minimalus vidinis lenkimo spindulys: 40 mm Gbsdpfxey Rkr Ss Aa Ujl Didžiausias vidutinis lenkimo spindulys: 400 mm Naudingoji ilgis su pozicionieriumi: 3500 mm Su matricų rinkiniu