Tns pirkti naudotą (135)

Būklė: naudotas, Gamybos metai: 2023, New demonstration machine! List price: €86,567 net. Base machine complete in standard configuration for drilling and grooving. For detailed technical specifications, please refer to the data sheet for ProTec Type 0571. Working unit with: PowerBlock with 21 spindles and 1 grooving saw: - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y Fourth drilling axis in Y. Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in through-feed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg Milling unit Profit HSK63F with 3-position magazine for automatic tool change, motor 5.5 kW (S1), 1000–20,000 rpm with frequency inverter, reversible rotation, for HSK63F tool holders with ER 462E/OZ25 collet chuck, cutter length up to 130 mm. Information: MultiUnit machining head with PowerBlock with 21/23 spindles, grooving saw, and optional Profit milling unit. Connection values: - Connected load: 12 kVA - Rated current: 17.5 A - Fuse: 32 A - Voltage: 400 V, 50 Hz, 3-phase (without transformer) - Network: TN or TT - Pneumatic connection: 7 bar (102 psi) On the machine: Coupling plug (quick coupling) ¼", DN7.2, brass, factory-fitted To the machine: Coupling socket (quick coupling) ¼", DN7.2, brass, customer side Supply line, minimum hose internal diameter 12 mm Compressed air demand: Continuous air consumption approx. 230 L/min (approx. 3.8 L/sec) (compressed air) Extraction: - Connection: 3 x extraction nozzles, Ø 80 mm - Extraction speed: 30 m/sec (measured at extraction nozzle) - Extraction requirement: min. approx. 2500 m³/h Machine weight: approx. 1650 kg (with options!) Machine installation site: A ProTec fix can, in principle, be bolted to the floor. A concrete floor (or foundation) is required—at least at the four machine corners/feet. Equipment: - Protec 571 Profit HSK63F with 3-position magazine - Folding roller table 765 mm (Y-axis), for machine front, width 500 mm - Folding roller table 765 mm (Y-axis), for machine rear, width 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Additional safety device via lamellar curtain Ijdjw Tfzfspfx Agfstd - Necessary for horizontal milling for Lamello P-System (without tools for Lamello P-System) Drill set for Protec: - Shank Ø 10 mm with clamping surface (JSO) - 1 HW roof tip drill 5x70mm (NL 35mm), LH #30566-5-05035-L - 3 HW dowel drills 5x70mm (NL 35mm), RH #30540-5-05035-R - 4 HW dowel drills 5x70mm (NL 35mm), LH #30540-5-05035-L - 3 HW dowel drills 8x70mm (NL 35mm), RH #30540-5-08035-R - 5 HW dowel drills 8x70mm (NL 35mm), LH #30540-5-08035-L - 2 HW dowel drills 10x70mm (NL 35mm), LH #30540-5-10035-L - 1 HW cup drill 15x70mm (NL 35mm), LH #30300-5-15070-L - 1 HW cup drill 20x70mm (NL 35mm), RH #30300-5-20070-R - 1 HW cup drill 35x70mm (NL 35mm), RH #30300-5-35070-R - HW grooving cutter Ø 125/30 mm - Groove width (SB) 4.0 mm, Z=12, LH, Leitz Only for chipboard and MDF, solid wood on request and after consultation Tool holders HSK63F 3 pcs For collet 462E/OZ25 Collet 462E/OZ25 for shank 25 mm, 3 pcs Insert cutter shank Z1+1, 1 pc HW with reversible knife drill tip Ø20, S25, LH 120, L2/L3 58 mm Grooving cutter HW insert Z1, 1 pc with reversible knife drill tip, D Ø10 mm, d Ø10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RH (adapter 0571WAB10 to be ordered separately) Decorative

Būklė: labai geros būklės (naudotas), Bomar Model: Bandsaw CLS 420.420 Dimensions: 2654 x 2135 x 1870 mm (LxWxH) Power supply: 3x400V, 50Hz; TN-C-S 4.5 kW, 16A Blade size: 4670 x 34 x 1.1 mm Cutting speed: 20-120 m/min Weight: 950 kg Condition: used Isdpfx Agevb Dy Ejfotd Scope of delivery: (see picture) (Subject to change and errors in technical data!) For further questions, please feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Model: BT1-FB010TN.D30 For sale is a high-quality Zwick/Roell Z010 TN ProLine material testing machine (BT1FB010TN.D30) with comprehensive equipment. The system is ideally suited for performing tensile, compression, bending, and component tests and is offered complete with original Zwick software, accessories, and safety shield. Itodsw Uifdspfx Agfod Complete system Including safety shield (CE-compliant, with electric interlock) Extensive accessories and software included Technical data of the testing machine: Model: Z010 TN ProLine, Rated force 10 kN Test area (W x H): 440 x 1050 mm Test speed: 0.001 – 1000 mm/min, continuous up to rated force High-precision guide, very low noise output High-resolution, maintenance-free DC motor Electrical connection adjustable across 6 voltage ranges Including interface card for force transducer (additional slot for expansions available) Expandable with options and modules Safety – Safety shield (included): Compatible with ProLine Z005TN, Z010TN, Z020TN With electric interlock and additional manual lock Makrolon panel 6 mm thick, pivotable (hinged left) CE-compliant Mandatory for applications where there is risk of operator injury Force transducer: Xforce HP force transducer, rated force 10 kN Accuracy class: 1 from 20 N, 0.5 from 100 N (according to ISO 7500-1) Extremely high linearity (

Būklė: paruoštas naudoti (naudotas), Supfina 811-507.4 NC pastūmos įrenginys, sudarytas iš: ZARN 2052 TN adatinis-išilginis cilindrinis guolis, 811-507:03-2 guolių plokštė, 811-507.2:01-2 kreipiamoji įvorė, 811-507.2:02-2 ritinėlinis srieginis mechanizmas, naudotas, su įprastais eksploatacijos žymėmis, 100% veikiantis, pristatomas pagal nuotraukas. Iedpfexah Sfsx Agfstd

Būklė: naujas, Tyrolit REI 103467 TN 34200609 dresavimo ritinys Schaudt Mikrosa, nenaudotas atidarytoje originalioje pakuotėje, 100% veikiantis, komplektacija pagal nuotraukas. Itjdpfjxaicxox Agfjd

Būklė: nepatikrintas (naudotas), Gamybos metai: 2012, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 12.0273 / 121V0308, veleno skylė: 128 mm, tekėjimo skersmuo: 530 mm, plotis centre: 3 000 mm, tekinimo skersmuo virš slankiojančio stalo: 830 mm, veleno greitis (min.): 1 800 aps./min, No reserve price – guaranteed sale to the highest bidder! Iedpfx Agowu E Icjfjtd By placing a bid, you commit to collecting the machine within the specified period from 28.07.2025 to 31.07.2025. TECHNICAL DETAILS Max. turning diameter: 530 mm Swing over bed: 820 mm Swing over cross slide: 530 mm Distance between centres: 3,000 mm WORK SPINDLE Front spindle nose (DIN 55027, 55029): B11 / C11 Spindle bore: 128 mm Taper in spindle - metric: 132 mm Control system: HEIDENHAIN MP620 Spindle speed range: 0 - 400 / 20 - 1,800 rpm Torque, stage 1: 2,150 Nm Torque, stage 2: 430 Nm X AXIS Travel: 370 mm Ball screw diameter/pitch: 32/5 mm Rapid traverse: 10 m/min Max. feed force: 10 kN Repeatability accuracy: 0.01 mm Z AXIS Ball screw diameter/pitch: 50/10 mm Travel: 3,000 mm Rapid traverse: 10 m/min Max. feed force: 20 kN Repeatability accuracy: 0.015 mm TOOL TURRET Type: Multifix D Tool cross-section: 40 x 40 mm TAILSTOCK Quill diameter: 115 mm Quill stroke: 225 mm Morse taper in quill: Morse 6 MACHINE DETAILS Connection voltage: TN-C 400/230 V Frequency: 50 Hz Machine dimensions: 5,000 x 2,200 x 1,900 mm Weight: 5,300 kg Connected load: 38 kVA EQUIPMENT With technical documentation Coolant tank capacity: 200 l Chip conveyor volume: 160 l

Būklė: geras (naudotas), Gamybos metai: 2008, In good technical condition and fully operational. Control system: Fanuc 0i-MF Plus Year of manufacture: 2008 X-axis travel: 510 mm Y-axis travel: 360 mm Z-axis travel: 300 mm Spindle taper: BT-30 Number of tools in magazine: 20 Rapid traverse (X/Y/Z): Up to 48 m/min Motor power: 5.5 kW Machine dimensions (L x W x H): 2,700 x 1,600 x 2,310 mm Itodpfx Aow Eil Hsgfod Machine weight: 2,000 kg Equipment: Renishaw tool setting probe Chuck CNC-controlled 5th axis TSUDAKOMA TN-101

Būklė: naujas, INA ZARN 2572 TN NA STD ašinis-radialinis ritininis guolis, nenaudotas, 100% veikiantis, komplektacija pagal nuotraukas Itodji Eba Njpfx Agfed

Būklė: naujas, INA ZARF 40100 L TN A adatinis ašinis cilindrinis ritininis guolis, serijos numeris pagal nuotrauką, nenaudotas atidarytoje originalioje pakuotėje, 100% veikiantis, komplektacija pagal nuotraukas. Iedpfei E E Tmox Agfstd

Būklė: naudotas, rida: 663 000 km, galia: 320 kW (435,08 AG), pirmoji registracija: 08/2016, kuro tipas: dyzelinas, bendras svoris: 26 000 kg, ašių konfigūracija: 3 ašys, kita apžiūra (TÜV): 04/2025, stabdžiai: retarderis, spalva: raudona, pavaros tipas: automatinis, emisijos klasė: Euro 6, Gamybos metai: 2016, Įranga: ABS, autonominis šildytuvas, elektroninė stabilumo programa (ESP), galinis keltuvas, oro kondicionavimas, suodžių filtras,

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2014, veikimo valandos: 715 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: L62500, rankos pasiekiamumas: 1 919 mm, bendras aukštis: 3 200 mm, bendras plotis: 4 600 mm, bendras ilgis: 5 200 mm, įėjimo įtampa: 400 V, aušinimo tipas: vanduo, Nous proposons une cellule de soudage TIG Yaskawa d’octobre 2014 en excellent état, avec très peu d’heures de fonctionnement, comme le confirment les photos documentaires jointes. La machine a été utilisée pendant une courte période et est restée hors service depuis, les composants pour lesquels elle avait été achetée n’étant plus fabriqués. Iodjx Exl Njpfx Agfotd L’installation est équipée d’une table rotative d’une capacité maximale de 1000 × 1500 mm, permettant le traitement alterné de deux pièces pour optimiser les temps de cycle et augmenter la productivité. Un système pousse-fil (alimentation fil) est également inclus, facilitant la réalisation de cordons d’apport ou le soudage dans les zones dépourvues de matériau de base. La technologie TIG embarquée est hautes performances, adaptée aux applications exigeant une grande précision, une répétabilité constante et une qualité de soudure supérieure. L’assistance technique est assurée par Roboteco S.p.A. (Yaskawa), avec un support fiable et un réseau international. La machine est immédiatement disponible, située à Tre Ville (TN), Italie. Le prix de vente inclut : - Démontage professionnel - Chargement sur le véhicule de transport de l’acheteur Des photos détaillées et des informations techniques complémentaires sont disponibles sur demande.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 20025431, paskutinio kapitalinio remonto metai: 2025, nominali galia: 30 kW (40,79 AG), bendras aukštis: 4 500 mm, REKORD B-SSt-ex Mahlanlage – Explosionsgeschützt, mit ATEX-Entlastungsventil -Einsatzbereiche: Zucker und Ersatzstoffe (z. B. Maltit), Salz, Natriumglutamat, Malz, Kakao, Milchpulver Iedpfx Aexql Swogfjtd -Zur Installation und zum Betrieb in der ATEX-Staubzone 22 -Komplett in Edelstahl AISI 316L ausgeführt KONFORMITÄT -EU-Maschinenrichtlinie 2006/42/EG -EU-ATEX-Richtlinie 2014/34/EU -EU-Verordnung über Materialien mit Lebensmittelkontakt EG 1935/2004 Mahlgut: -Produkt: Zucker und Ersatzstoffe (z. B. Maltit), Salz, Natriumglutamat, Malz, Kakao, Milchpulver -Aufgabekörnung: ≤ 1,5 mm -Endfeinheit: 95 % ≤ 20–30 µm, über Drehzahl und Aufgabe regulierbar -Durchsatz: 300–500 kg/h, je nach Endfeinheit STIFTMÜHLE -Baugröße: 315 mm -Gehäuse: druckstoßfest, Schwenktür mit Sicherheitsverriegelung -Mahlelemente: Stiftrotor und -stator -Drehzahl: 12.000 min⁻¹ / 200 m/s -Antriebsmotor: max. 22,5 kW; IE3 -Lager: Schwerlast, automatisch geschmiert -Dichtung: Labyrinthdichtung mit Sperrgas AUFGABEBEHÄLTER MIT SCHUTZSIEB & ATEX-ZELLRADSCHLEUSE -Volumen: 100 l -Edelstahlsieb (3,15 × 0,8 mm) zur Abscheidung von Agglomeraten und Fremdstoffen -Dosierbare Zuführung, ab Werk auf Ziel-Durchsatz eingestellt -Pneumatischer Schieber für schnellen Austragswechsel -Flammdichte Zellradschleuse, ATEX-zertifiziert -Magnetabscheider unter der Schleuse -Pneumatischer Produkttransport zur Mühle GERÜHRTER PUFFERTANK MIT FILTER -Frei fallender Austrag von der Mühle in 200-l-ATEX-Puffertank (70–100 kg Kapazität) -Ausgestattet mit Rührwerk und Füllstandserfassung (automatischer Stopp bei Maximalfüllstand) -Druckstoßfest, geschützt durch flammenloses Berstventil -Patronenfilter mit Differenzdrucküberwachung -Druckluftanlage (Behälter, Leitungen, Ventile) enthalten -Absauggebläse für kontinuierlichen Luft- und Produktstrom; gereinigte Luft wird nach außen abgeleitet ABGABESYSTEM -Schneckenförderer mit frequenzgeregeltem Antrieb -Flammdichte Austrags-Zellradschleuse (ATEX) -Abgabe für Sackbefüllung bis 55 kg oder Wagenbeladung MEDIENANSCHLÜSSE -Strom: ≈ 30 kW, 3~400 V, 50 Hz, IP 55, TN-C -Druckluft (ölfrei/wasserfrei): 12–15 Nm³/h, ≥ 6,1 bar STEUERUNG -SIEMENS 15″ HMI und S7-1200 SPS -Ethernet-Schnittstelle für Daten- und Fehlerübertragung an die zentrale Leitwarte -Fernwartungsoption -Antriebe: min. IP55, Farbe RAL 5017 -DANFOSS Frequenzumrichter *Schaltschrank befindet sich außerhalb des Ex-Bereiches

Būklė: naujas, Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1FK7060-2AC71-1BA2, galia: 1,1 kW (1,50 AG), nominali galia: 1,1 kW (1,50 AG), sukimosi greitis (min.): 2 000 aps./min, sukimosi greitis (maks.): 2 000 aps./min, bendras svoris: 8 kg, aušinimo tipas: oras, apsaugos tipas (IP kodas): IP65, Transfer 1FK7060-2AC71-1BA2 SIMOTICS S Synchronous Motor 1FK7-CT Rated Power: 1.1 kW; DC Link Voltage: 600 V Rated Torque: 6 Nm (100K); Rated Speed: 2000 rpm; self-cooled Design: IMB 5 (IM V1, IM V3) Flange 1 Rotatable power connector Single-turn absolute encoder 24-bit with Drive-CLiQ interface (Encoder AS24DQI) Shaft with keyway, tolerance N, without holding brake, Protection class IP65 Drive end flange IP67 1,000 units Discount 1 Material group: 762 AL: N ECCN: N Itjdew Hbn Ajpfx Agfjd Customs tariff number: 85015220 Country of origin: DE GERMANY PUL: DE GERMANY AL BA BW CA CH CL CO CR DZ EC EG GT HN IL IS JO KR LB LS MA ME MK MX NA NI NO PA PE RS SV SZ TN UA XK ZA PRAEF: N TR 1,238.21 per unit -30.00% 866.75 € 830

Būklė: labai geros būklės (naudotas), veikimo valandos: 8 064 h, Markė: LAGUN Modelis: GBM-22E Tipas: CNC 5 ašių Valdymas: HEIDENHAIN 530 Stalo matmenys: 2.200 x 1.000 mm T-plyšių skaičius ir plotis: 7 x 22 mm Atstumas tarp plyšių: 140 mm Ašių eiga (X, Y, Z): 2.000 x 1.200 x 1.000 mm Galvutės tipas: Automatinė Galvutės apsukos: 4.000 rpm Kūgis: ISO 50 DIN 2080 Variklio galia: 28 kW Nuolatinės variacijos greitis: 50➗ 4.000 Greičių diapazonas: 2 Greitasis pastūma: 10.000 mm/min Staklių svoris: 15 t Elektroninis rankenėlė: Taip Darbo valandos: Įrenginys veikia: 22.924 h Valdymas įjungtas: 23.132 h Iodpoyg R Abofx Agfstd Automatinis ciklas: 8.064 h

Būklė: geras (naudotas), Reznor UDSA Gas Warm Air Heater UDSA Gas Warm Air Heater – Efficient Performance to the Highest Standard The most well-known unit from REZNOR is the UDSA gas warm air heater, which ensures even air distribution in industrial halls. The easy-to-install recirculation unit is available in 14 output sizes ranging from 7 to 97 kW and consists of a heat exchanger, gas burner, and an exhaust fan. The combustion air can be supplied either from outside (as standard) or from the installation room. The REZNOR UDSA warm air heater guarantees uniform air distribution throughout the heated hall. Its patented heat exchanger sets new benchmarks regarding airflow and heat transfer, achieving an efficiency of over 92%. UDSA: compact, revolutionary, and trend-setting. This generation of equipment enables particularly economical hall heating directly (i.e., without central heating) using decentralized, modulating gas warm air heaters. REZNOR UDSA Gas Warm Air Heater – Key Benefits: - Efficiency level of more than 92% - Suitable for vertical mounting - Low NOx emissions - Innovative combustion concept - Quiet operation - CE system certification, B and C versions - Compact design for simple installation - Even heat distribution - Supplied with vertical and horizontal air deflection louvres as standard - Heating output modulation up to 50% - EC technology - ErP Ready These units are direct-fired gas warm air heaters (WLE) equipped with fan-assisted atmospheric multi-gas burners. Installation and gas/flue connection must only be performed by an authorised installation company. The gas warm air heaters are suitable for: - Operation with natural gas or LPG - Recirculating air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Single-stage or two-stage* heating operation via room thermostat and heating control switch - Ventilation° regulated via ECOtronic TN - L° with day/night/week program - Flue gas discharge via roof, type B or C° - Flue gas discharge through the exterior wall, type C° Gas Warm Air Heater Type: UDSA015-4 Appliance Category: B22P-C12-C32-C52-C62-C82 Designation: DE Gas Category: I2ELL Gas Type: G20 natural gas Inlet pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. rated heat input (Gross) QN: 17.60 kW Max. rated heat input (Net) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Itsdpsx Ihiijfx Agfjd Air flow rate: 1360 m3/h Protection class: IP20 More new and used items in our shop! International shipping costs on request!

Būklė: geras (naudotas), Reznor UDSA Gas Warm Air Heater UDSA Gas Warm Air Heater – efficient to the highest level The most renowned unit from REZNOR is the UDSA gas warm air heater, which ensures uniform air distribution in industrial halls. This easy-to-install recirculation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and an exhaust fan. The combustion air can be supplied either as standard from outside or from within the installation room. The UDSA warm air heater from REZNOR guarantees uniform air distribution in the heated hall. Its patented heat exchanger sets new standards for airflow and heat transfer, achieving an efficiency of over 92%. UDSA: compact, revolutionary, and trendsetting. This new generation of units allows halls to be heated in a particularly economical way—directly, that is, without a central heating system—using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas Warm Air Heater. The advantages: - Efficiency of more than 92% - Also suitable for vertical installation - Low NOx emissions - Innovative combustion concept - Quiet operation - CE system certification, type B or C - Compact design for easy installation - Uniform heat distribution - Standard fitted vertical and horizontal air distribution fins - Modulation of heating output down to 50% - EC technology - ErP Ready These units are direct-fired gas warm air heaters (WLE) with fan-assisted atmospheric multi-gas burners. Installation and gas/flue connection must only be carried out by an authorized installation company. These gas warm air heaters are suitable for: - Operation with natural gas or LPG - Recirculating air operation - Inlet air temperature below 5°C with stainless steel heat exchanger* - One-stage or two-stage* heat operation via room thermostat and control switch Heating - Ventilation° control via ECOtronic TN-L° with day/night/week program - Flue gas discharge via roof, type B or C° - Flue gas discharge through external wall, type C° Gas WLE type: UDSA025-3 Gas device type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max rated heat input (Hs) QN: 30.08 kW Max rated heat input (Hi) QN: 27.75 kW Max rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m³/h Itedpfx Ajx Ihg Iogfod Protection class: IP20 Find more items—new and used—in our shop! International shipping costs on request!

Būklė: naudotas, pavaros tipas: kitas, kuro tipas: dyzelinas, rida: 1 001 km, vairuotojo kabina: kitas,

Būklė: naudotas, rida: 1 126 054 km, galia: 265 kW (360,30 AG), pirmoji registracija: 06/1999, kuro tipas: dyzelinas, bendras svoris: 26 000 kg, padangos dydis: 315 / 80 R 22,5, ašių konfigūracija: 6x4, ratų bazė: 4 600 mm, spalva: balta, vairuotojo kabina: miegamoji kabina, pavaros tipas: mechaninis, emisijos klasė: euro2, pakaba: plienas, sėdimų vietų skaičius: 2, Įranga: ABS, autonominis šildytuvas, diferencialo užraktas, kabina, kruizo kontrolė, oro kondicionavimas, papildomi žibintai, priekabos jungtis, spoileris, sėdynės šildytuvas, žemas triukšmo lygis,

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, ritės vidinis skersmuo: 508 mm, ritės išorinis skersmuo: 2 000 mm, ritės svoris: 16 000 kg, ritės plotis: 1 000 mm, gaminio plotis (maks.): 1 250 mm, paskutinio kapitalinio remonto metai: 2022, Automatiškai centruojantis FLENDER suvyniojimo būgnas + 2 automatiškai centruojantys FROHLING išvyniojimo būgnai Būgnų komplektas: DU IŠVYNOJIMO ir VIENAS SUVYNIOJIMO Prekės ženklas: - Frohling – išvyniojimui - Flender – suvyniojimui Atnaujinti ir perrinkti su AUTOCENTRAVIMU ir linijiniais bėgeliais 2022 m. (prieš tai taip pat buvo puikios būklės, bet trūko visų priedų ir CPC automatinio centravimo) Talpa: 16MT Vidinis ritės skersmuo: 508 mm, išorinis – 2 000 mm Didžiausias juostos plotis: 1 100 mm (galima padidinti iki 1 250 mm) Didžiausias linijos greitis: 240 m/min Autonominė tepimo sistema su filtru ir siurbliu Itsdpju Hlauofx Agfjd Parduodama be variklių ir greičio keitimo Įranga paruošta bet kokiai apžiūrai mūsų sandėlyje Roverete (TN), Italijoje Dėl klausimų prašome kreiptis. JEIGU DOMINA, SUSISIEKITE SU MUMIS – BŪTINAI SUTARSIME.

Būklė: visiškai atnaujintas (naudotas), TECHNINIS APRAŠYMAS KKS 450 KKS 450 Pusiau automatinis, hidraulinis universalus diskinis pjūklas su pasukamu stalu kampiniams pjūviams. Itsdpfxsx N Ncao Agfjd PJŪKLO DISKAS Segmentinis pjūklo diskas Disko tvirtinimas pagal DIN 8576 ☐ 400 x 4 ☒ 450 x 4 mm 50/4x14/80 mm DARBO SRITIS Apvalios medžiagos 90/45°: 125 / 150 mm Kvadratinės medžiagos 90°: 115 / 140 mm 45°: 110 / 130 mm Plokščios medžiagos 90°: 305 x 40 / 330 x 40 mm 45°: 235 x 30 / 250 x 40 mm U formos profiliai, statmenai 90/45°: 120 x 55 / 140 x 60 mm gulsčiai 90°: 240 x 85 / 280 x 95 mm 45°: 180 x 70 / 220 x 80 mm Pjūvio ilgiai nuo 10 mm VARIKLIO GALIA Pjūklo variklis: 1,8/2,7 kW Hidraulika: 1,5 kW Aušinimo skysčio siurblys: 0,1 kW PJOVIMO GREIČIAI (standartas): 11,5/23 13/26 m/min arba 10/20 11/22 m/min arba 13/26 15/30 m/min PJŪKLO DISKO PADAVIMAS tabėlėje nurodytoje riboje reguliuojamas be pakopų: 0–1.000 mm/min Grąžos eiga: 3.300 mm/min ELEKTROS PRIJUNGIMAS TN-S sistema – 3 fazės, nulis, žemė – 400 V / 50 Hz SVORIS Mašina be priedų: apie 1.050 kg

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, bendras plotis: 2 300 mm, bendras ilgis: 4 215 mm, stalo aukštis: 1 000 mm, darbinis plotis: 1 500 mm, Įranga: dokumentacija / vadovas, MetalMaster 2.0 CNC valdomas plokščias sausos plazmos pjaustymo staklės, skirtos atskirų lakštų autogeniniam ir plazminiam pjovimui. Dvipusiai ilginiai pavaros su tiksliu mechaniniu profilių apdirbimu užtikrina: - didelius pozicionavimo ir darbo greičius - Pozicionavimo greitis max: 35 000 mm/min - Darbo greitis: 5 000 mm/min - Aukštą pjovimo tikslumą ir kontūrų atitikimą Itsdpfx Ajxyhnasgfjd - Tikslumai pagal DIN EN 28206 - Maitinimo įtampa: 400 V, 50 Hz, TN-S tinklas (3/PE/N) - Spalva: pagrindinės dalys RAL 5002 mėlynos - Aplinkos temperatūra: +5°C iki +45°C - Santykinė oro drėgmė: max. 90 %, nekondensuojanti Integruotas ištraukimo stalas - Atramos aukštis: 1000 mm - Maks. stalo apkrova: 800 kg/m2 Staklės - Maks. lakšto formatas: 1500x3000 mm - Bendras plotis: 2300 mm - Bendras ilgis: 4215 mm Daugiau informacijos rasite nuotraukose!

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 530 mm, Y ašies eiga: 530 mm, Z ašies eigos atstumas: 465 mm, veleno greitis (maks.): 12 000 aps./min, įrankių magazino lizdų skaičius: 54, TECHNICAL DETAILS Control: Sinumerik One - Spios 24 Touch Travel X: 1,530 mm Travel Y: 530 mm Travel Z: 465 mm Spindle and Tool System Number of tools: 54 Milling spindle: High-precision milling spindle, in-line spindle with direct drive (no belt) Spindle speed: max. 12,000 rpm Spindle power: 15.2 kW Spindle torque: max. 97 Nm Tool holder: SK40 DIN 69871 Changer type: Double gripper Spindle pressure: 22 bar Table System Rotary-tilt table: 2-axis, D = 650 mm Table design: Precision version "T" Iedpfx Agjwu Ebisfetd Fixed table: left in the working area Hydraulic brake: on B and C axis Rotary feed-through: dual, in the center of the C axis Table load: 500 kg B axis: -5°/110° Direct Measuring System: on B and C axes Direct measuring systems: on X, Y and Z axes Control Unit Control type: Siemens SINUMERIK ONE Language selection: CNC dialog in German, English as second language Touch panel: SPIOS Touch V2 Operation: Multi-control wheel, multifunctional handheld device Software: Machining software: ONE-Dyn. Operate 3A-Fr Programming function: ShopMill step programming Axis machining: 4 axes with rotary axis 3D function: 3D simulation of workpiece Rest material detection: included DXF reader: single license Machining tracking: process path tracing Kinematic measurement: Cycle 996 Memory expansion: 2 GB additional user memory Probing features: for integration of touch probes MACHINE DETAILS Cooling and Pressure Universal chip conveyor: with coolant tank High-pressure tank: 22 bar Spindle preparation: for high pressure Blow air: additional blow air at spindle head Spindle probe preparation: available Robot Integration Robot door: available Interface: UNIROB universal robot interface Electrics Operating voltage: 3×400 V ±10 % Line frequency: 50 Hz (±2 %) Network type: TN network (5-wire system) Standards: Technical design in accordance with CE EQUIPMENT - Chip conveyor - Blow air at spindle head - Robot door, right side - UNIROB universal robot interface - BLUM spindle probe

Būklė: beveik kaip naujas (naudotas), Características: * Sistema: circulación forzada de película ascendente. * Número de efectos: 3 * Consumo de agua de torre: 625 m³/h, aproximadamente 500 m³/h con un diferencial de temperatura de 10 ºC. Iedpsyn Hm Sofx Agfstd Incluye: * 2 bombas de vacío SIHI * Enfriador flash (flashcooler) * Refractómetro * Bomba mono PCM La producción puede variar según el producto. Producción de entrada de tomate a 5ºC Brix: 700 Tn/24 h Producción de extracto de tomate a la salida con 28º/30ºC Brix: 4.600 kg/h.

Būklė: naujas, Gamybos metai: 2024, veikimo valandos: 25 h, High-Performance Machining Center SPINNER VC850 Traversing paths: X850, Y510, Z510 mm In the "Advanced" configuration with patented guideway cover system High-precision MILLING SPINDLE up to 12,000 rpm / 15.2kW / 97Nm (max) as in-line spindle with direct drive, no belt Spindle tool holder: SK40 DIN69871 TOOL MAGAZINE with 32 tool stations Pneumatic MAGAZINE FLAP inside the working area DIRECT MEASURING SYSTEMS in the X/Y/Z axis Control: FANUC 0i-F Plus with the following basic functions: - Path control with Fanuc iHMI user interface - Fanuc 15" LCD touch screen - User memory 2MB, max. 1000 program numbers - USB interface for NC program data exchange, Ethernet interface - Max. 4 axes can be interpolated simultaneously - 6+48 workpiece coordinate systems available - 400 tool correction pairs, with tool life monitoring - With G-Code & M-Code Guidance functions - Extensive Fanuc cycle package "Milling" as standard, as G-code and MGi e.g. tapping without floating chuck, thread cutting and engraving. Functions for helical and cylindrical interpolation - Functions for scaling, mirroring, and coordinate system rotation - Background parallel programming - Run-time and piece counter - Inch-metric switching - Electronic handwheel as standard - Control dialog languages: German/English/French UNIVERSAL CHIP CONVEYOR VC850 Exiting to the RIGHT side of the machine Preparation of spindle FOR HIGH PRESSURE for using the auxiliary tank up to 22 bar HIGH PRESSURE TANK 22 bar with paper band filter for central spindle flushing Preparation for SPINNER STANDARD PROBE Blum Wireless SPINDLE PROBE Spinner-Blum with tool holder matching the milling spindle ADDITIONAL TOP COVER for enclosed work area, required for high-pressure flushing or highly misting processes / extraction STANDARD DOCUMENTATION IN GERMAN Iedpfx Aek Raywsgfjtd Consists of machine manual and CNC manuals, supplied in digital form on the control. Printed manuals available at extra cost. LIFTING EYES for crane unloading, set of 4 pcs. Mandatory for crane transportation STANDARD PAINT FINISH two-tone in light grey RAL7035 and blue-grey RAL5008 Electrical configuration EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN system (5-wire) Notes: The price only includes warranty services within Germany. For new and demonstration machines, the pictures shown may not necessarily depict the specific machine but are images of similar models. Displayed accessories, such as clamping devices or tool holders, are only included in the delivery as listed in the technical description. Please request a detailed offer ex works. Visit our factory near Munich or one of our showrooms. We might have other offers for similar machines. Interim sale expressly reserved.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, galia: 56 kW (76,14 AG), Housing: Standard Structure: Stationary frame, incl. hook-lift function for on-site mobility Color: RAL 5003 | RAL 7047 | RAL 7016 Drive: 100% electric Power: 56 kW Hydraulics: electronic mobile control Feed hopper: Standard Iodpfxswylvdo Agfotd Discharge conveyor – Finished material: Belt width 650 mm Discharge conveyor – Oversize material: Belt width 800 mm Voltage: 400V ±5% / 50Hz Power system: TN-C/(S) Operation: 6.5" panel, incl. CANBUS Remote control: 4-button Central lubrication: automatic Tool box: 1x incl. Fire extinguisher: 1x incl.