Tempimo Apkrova pirkti naudotą (1 767)

Sąlyga: naudotas, Gamybos metai: 2017, Rotary stretch blow molding machine for blowing PET bottles from preforms. Preforms are poured from a container into the feed hopper via a tipping device. From the hopper, the preforms are discharged using an elevator conveyor with electronically controlled speed and are transferred via a chute and loading starwheel in a uniform orientation to the blow molding machine. The shape and size of the preforms are checked and defective preforms are rejected before they are fed to the heating ovens via a mechanical starwheel. In the heating ovens, the preforms are preheated with infrared lamps. For symmetrical heat distribution, they are continuously rotated during this process. Fans prevent overheating of the outer surfaces. Finally, the preform temperatures are monitored by an optical pyrometer. Grippers handle loading and unloading of preforms to and from the blow wheel. The blowing unit uses 'crocodile molds', with longitudinal stretching supported by a stretch rod. The preforms are then blown into PET bottles. The stretch-blown bottles are removed from the cavities by grippers and conveyed to the discharge area. Cpodexyktlspfx Ab Sjt Machine (additional): Rotary blow molding machine Power: 58 kW Number of cavities: 8 Number of bottles discharged per cycle: 202 Blowing pressure: 30 bar Voltage: 400 V Frequency: 50 Hz Water: 4 bar Compressed air: 360 Nm³/h at 7 bar Formats: 0.5 l; 1.0 l; 1.5 l PET bottles Equipment: Preform feed hopper with tipping device for containers, preform elevator conveyor, preform inspection, heating ovens, blow wheel; bottle discharge; screen visualization Weight: 16,700 kg

Sąlyga: labai geros būklės (naudotas), rida: 424 583 km, pirmoji registracija: 06/2016, kuro tipas: dyzelinas, ašių konfigūracija: 8x4, ratų bazė: 3 700 mm, kuras: dyzelinas, kuro bako talpa: 1 000 l, stabdžiai: variklio stabdymas, spalva: geltonas, vairuotojo kabina: miegamoji kabina, pavaros tipas: automatinis, emisijos klasė: Euro 6, bendras ilgis: 7 600 mm, bendras plotis: 2 550 mm, Gamybos metai: 2016, Įranga: ABS, AdBlue, autonominis šildytuvas, centrinis užraktas, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, priešrūkiniai žibintai, spoileris, suodžių filtras,

Sąlyga: naudotas, Cette annonce concerne une cellule de charge statique traction/compression Instron 2518-807. L’unité est en parfait état de fonctionnement et prête à être expédiée immédiatement. La cellule de charge statique traction/compression Instron 2518-807 est conçue pour des mesures de force haute précision dans de nombreuses applications d’essais. Sa construction robuste permet un test précis en traction, compression, cyclique et en inversion de contrainte, ce qui en fait un outil indispensable pour les laboratoires d’essais des matériaux et les environnements d’assurance qualité. Caractéristiques principales : - Capacité : Mesure jusqu’à 100 N (22 lbf), adaptée à une grande diversité de scénarios de test. - Plage de mesure exceptionnelle : Précision de mesure jusqu’à 1/500e de la capacité maximale, garantissant une très haute précision dans toutes les applications. - Reconnaissance automatique : Équipée d’un numéro de série électronique et d’un calibrage électrique, pour un fonctionnement simple et sans erreur, sans configuration manuelle. - Protection intégrée contre les surcharges : Conception incluant une protection contre les surcharges afin de réduire le risque de dommage lors de la manipulation ou des essais, assurant durabilité et fiabilité. - Fonction de tare : Offre une capacité de tare jusqu’à 40 % de la capacité de force, permettant l’utilisation de différents dispositifs de préhension ou accessoires pour plus de polyvalence. - Conformité aux standards : Entièrement conforme aux normes internationales de mesure de force, telles que ASTM E4, ISO 7500-1 classe 0.5, et JIS B7721, B7733, garantissant fiabilité et précision des protocoles de test. - Compatibilité : La cellule de charge Instron 2518-807 est compatible avec divers systèmes de test Instron, notamment les séries UT et 3300. Sa polyvalence la rend idéale pour les applications suivantes : Cpedpfxsxxznde Ab Set Essais de matériaux : Parfaite pour évaluer les propriétés mécaniques des matériaux sous traction et compression. Contrôle qualité : Utilisée dans l’industrie pour garantir la conformité et la constance des produits. Recherche et développement : Outil essentiel pour les ingénieurs et scientifiques expérimentant le comportement des matériaux sous différentes charges.

Sąlyga: labai geros būklės (naudotas), rida: 951 611 km, galia: 390 kW (530,25 AG), pirmoji registracija: 10/1999, kuro tipas: dyzelinas, ašių konfigūracija: 6x4, kuras: dyzelinas, stabdžiai: retarderis, spalva: geltonas, vairuotojo kabina: miegamoji kabina, pavaros tipas: mechaninis, pakaba: plienas, Gamybos metai: 1999, Įranga: oro kondicionavimas, retarderis,

Sąlyga: naudotas, Gamybos metai: 2005, Spaudimas: 1000 t Stovų tarpas: 4100 mm Eiga: 1200 mm Atstumas tarp stalo ir slankiklio, aukščiausioje padėtyje: 2100 mm Stalo matmenys: 4000 x 2200 mm Tempimo pagalvės spaudimas stale: 360 t Cpedpfx Aevuubgob Sjt Tempimo pagalvės eiga stale: 300 mm Tempimo pagalvės matmenys stale: 3500 x 1600 mm Tempimo pagalvės spaudimas slankiklyje: 100 t Tempimo pagalvės eiga slankiklyje: 160 mm Tempimo pagalvės matmenys slankiklyje: 3250 x 1600 mm Slankiklio matmenys: 4000 x 2200 mm Šoninis stovų praėjimas: 1300 mm Alyvos tūris: 8000 l Variklio galia: 300,0 kW Užimamas plotas (PxGxA): 5,75 x 4,3 x 9,55 m Aukštis virš grindų: 7,7 m Pagaminimo metai: 1973 - Modernizuotas 2005 Su alyviniu hidrauliniu pavaros mechanizmu, hidrauliškai valdomomis tempimo pagalvėmis stale ir slankiklyje, hidrauline pjovimo smūgio slopinimo sistema Išmontuota ir sandėliuojama – prieš išmontavimą darytas vaizdo įrašas pas pardavėją

Sąlyga: naujas, Gamybos metai: 2025, spaudimo jėga: 300 t, stalo plotis: 1 000 mm, stalo ilgis: 1 000 mm, tarpas tarp stulpų: 1 000 mm, atitraukimo jėga: 100 t, eigos ilgis: 800 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH 300 / 100 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 300 / 100 ton four-column hydraulic deep drawing press is a high-rigidity four-column hydraulic press solution developed for metal forming, deep drawing, and precision pressing applications. The St52-grade steel welded body undergoes a stress relief process using vibration. This ensures that the parallelism and perpendicularity tolerances are stably maintained across the full stroke during pressing. Ram and blank holder systems operate independently, and stroke and tonnage settings can be precisely controlled via a touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 motor class, and PLC-controlled structure, the press offers high efficiency and reliable operation. Maintenance requirements are minimized thanks to the automatic lubrication system and electronic filter contamination alerts. With its 300 / 100 ton capacity, this model is the ideal industrial press solution for mid and high-tonnage metal forming, deep drawing, and die applications. Key Advantages - High-rigidity four-column press frame - Independent stroke and tonnage adjustment for ram and blank holder - Full control via touchscreen panel - High precision and repeatability - Long-lasting, low-maintenance design Application Areas - Metal forming operations - Deep drawing processes - Die trial and production lines - Auxiliary pressing processes ⚙️ STANDARD AND TECHNICAL FEATURES TYPE: Four-column FRAME MATERIAL: St52 – ERDEMİR COLUMN DIAMETER: Ø 90 mm – 4 pcs. induction-hardened chrome-plated shafts SLIDE BEARINGS: Bronze Zr14 CAPACITY (RAM): 300 Tons CAPACITY (BLANK HOLDER): 100 Tons DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter STROKE (RAM): 800 mm STROKE (BLANK HOLDER): 200 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 900 mm WELDING STRESS RELIEF: Vibration stress relief WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 30 kW – IE3 MAIN PUMP: 45 cm³ – REXROTH or PARKER MOVING TABLE FAST APPROACH SPEED: 150 mm/sec FORMING SPEED: 12 mm/sec RETURN SPEED: 170 mm/sec BLANK HOLDER FORWARD SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 390 mm – Ck45 Cpjdpfx Ajx N Unzeb Set BLANK HOLDER CYLINDER BORE: Ø 230 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROX. PRESS DIMENSIONS: 4000 × 1450 × 1450 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1300 mm MAIN CHARGING VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCHSCREEN PANEL: DELTA 7” CONTROL COMPONENTS: SIEMENS – SCHNEIDER APPROX. WEIGHT: 18 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Sąlyga: naudotas, rida: 101 590 km, galia: 353 kW (479,95 AG), pirmoji registracija: 01/2023, kuro tipas: dyzelinas, padangos dydis: 315/60 R22.5, ašių konfigūracija: 4x2, kuras: dyzelinas, stabdžiai: variklio stabdymas, spalva: kitas, vairuotojo kabina: miegamoji kabina, pavaros tipas: automatinis, emisijos klasė: Euro 6, pakaba: oras, Gamybos metai: 2023, Įranga: ABS, antras kuro bakas, autonominis šildytuvas, centrinis užraktas, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, kruizo kontrolė, spoileris,

Sąlyga: naudotas, Gamybos metai: 1980, Presskraft 400 t Stanchion clearance 3250 mm Distance table/ram, max. stroke top, adjustment top 1000 mm Stroke 800 mm Table size 3250 x 1400 mm Table height above floor 1250 mm Blankholder force 170 t Blankholder stroke 200 mm Blankholder area 1800 x 1000 mm Stanchion gap between cutting shock absorbers 2610 mm Lateral frame passage 800 mm Ram area 3250 x 1400 mm Return force 51 t Speed down 300 mm/s Speed up 300 mm/s Working speed 16 - 33 mm/s Oil capacity 2900 l Drive power 100.0 kW Weight 70.0 t Cpsdpfxjvuk S Io Ab Sst Space requirement (W x D x H) 4.9 x 3.1 x 7.6 m Approved for hand-insertion operations according to German accident prevention regulations (UVV) with oil-hydraulic drive, pressure/time and stroke dependent control, light barrier (Sick) front and rear, hydraulic blankholder in table (controllable), hydraulic cutting shock damping with motorized adjustable depth stop, hydraulic ram locking, two-hand operation as is and as lies, WITHOUT commissioning / WITHOUT further work, Commissioning in our warehouse (with new control system) / safety upgrade / overhaul can be offered at additional cost upon further interest.

Sąlyga: naujas, Gamybos metai: 2025, spaudimo jėga: 150 t, stalo plotis: 800 mm, stalo ilgis: 800 mm, tarpas tarp stulpų: 800 mm, eigos ilgis: 600 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH 150/50 TON COLUMN-TYPE HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 150/50 ton column-type hydraulic deep drawing press is an industrial solution developed for metal forming, deep drawing, and precision pressing applications. It features a rigid, four-column frame design for maximum stability and accuracy. The St52 grade steel frame is stress-relieved by vibration, ensuring high parallelism and squareness tolerances during prolonged operations. The ram and blank holder systems operate independently, with precise stroke and pressure adjustments made via a touchscreen control panel. Utilizing REXROTH or PARKER hydraulic components, IE3 class motor, and PLC-controlled architecture, the press delivers high efficiency, reliability, and a long service life. The automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements. With a 150/50 ton capacity, this model is the ideal solution for mass production, die testing, and medium-to-high tonnage deep drawing applications. Key Advantages - Rigid 4-column press body - Independent stroke and tonnage adjustment for ram and blank holder - Full control via touchscreen panel - High precision and repeatability - Low maintenance costs and long lifespan Application Areas - Metal forming operations - Deep drawing applications - Die testing and production processes - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: 4-column FRAME MATERIAL: St52 – ERDEMIR COLUMN DIAMETER: Ø 90 mm – 4 pcs, induction-hardened chrome-plated shafts SLIDE BEARING: Bronze Zr14 Cpodpfx Aex N Ul Teb Sot CAPACITY (RAM): 150 Ton CAPACITY (BLANK HOLDER): 50 Ton DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 micron/meter SQUARENESS TOLERANCE: 60 micron/meter RAM STROKE: 600 mm BLANK HOLDER STROKE: 200 mm MIN. DAYLIGHT: 100 mm MAX. DAYLIGHT: 700 mm WELDING STRESS RELIEF: Vibrational stress relief WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 18.5 kW – IE3 MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVABLE TABLE FAST APPROACH SPEED: 150 mm/s MOVABLE TABLE PRESSING SPEED: 12 mm/s MOVABLE TABLE RETURN SPEED: 170 mm/s BLANK HOLDER TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 280 mm – Ck45 BLANK HOLDER CYLINDER BORE: Ø 160 mm – Ck45 AUXILIARY FAST-STROKE CYLINDERS: 2 pcs APPROXIMATE PRESS HEIGHT: 3800 mm APPROXIMATE PRESS WIDTH: 1150 mm APPROXIMATE PRESS DEPTH: 1150 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1200 mm PRE-FILL VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable via screen) RAM/BLANK HOLDER STROKE & TONNAGE ADJUSTMENT: Adjustable via screen SYSTEM & PRESS STATUS INFO: Viewable via screen DIE MEMORY: Adjustable via screen LINEAR POSITION TRANSDUCER: NOVATECHNIK or TURCK PLC APPLICATION: DELTA TOUCHSCREEN PANEL: DELTA 7” SWITCHGEAR: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 9 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Sąlyga: naudotas, Gamybos metai: 1991, Slėgis 200 t Stulpelių tarpas 1100 mm Eiga 600 mm Atstumas stalas/kumštis, didžiausia eiga viršuje, viršutinė reguliacija 1100 mm Stalo plotas 1000 x 1000 mm Traukiamojo pagalvės slėgis stale 63 t Traukiamojo pagalvės eiga stale 250 mm Traukiamojo pagalvės plotas 800 x 750 mm Stalo aukštis nuo grindų 800 mm Kumščio plotas 1000 x 1000 mm Greitis žemyn 400 mm/s Cjdpsvzxqrjfx Ab Sspt Greitis aukštyn 250 mm/s Darbinis greitis 22 - 56 mm/s Variklio galia 45,0 kW Svoris 24,0 t Užimamas plotas (PxGxA) 2,4 x 1,5 x 5,9 m Metai 1966 - modernizuota 1991 Leidžiama naudoti rankiniam padėjimui pagal Vokietijos nelaimingų atsitikimų prevencijos taisykles (UVV) su alyvos hidrauline pavara, valdymu pagal slėgį/laiką ir padėtį, hidrauliniu tempimo pagalviu stale, kumščio užraktu, dvi rankų valdymu tokios būklės kaip stovi ir yra, BE paleidimo Kaina paleidimui (esamoje būsenoje arba su nauja valdymo sistema) - pagal užklausimą

Sąlyga: naujas, Gamybos metai: 2025, spaudimo jėga: 100 t, stalo plotis: 800 mm, stalo ilgis: 800 mm, tarpas tarp stulpų: 800 mm, atitraukimo jėga: 40 t, eigos ilgis: 600 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH 100/40 Ton Four-Column Hydraulic Deep Drawing Press General Description The CRONOSSTECH 100/40 ton four-column hydraulic deep drawing press is an industrial solution with a rigid four-column body structure, engineered for metal forming, deep drawing, and precision pressing applications. The frame is fabricated from St52 quality steel and subjected to stress relief treatment by vibratory methods. This design ensures high parallelism and perpendicularity tolerances are maintained over prolonged periods. The ram and cushion systems operate independently; stroke and pressure settings are precisely controlled via touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 efficiency class motor, and PLC-controlled architecture, the press delivers high efficiency, reliability, and a long service life. The automatic lubrication system and electronic filter contamination warnings minimize maintenance requirements. This model is an ideal solution for medium-scale serial production, die trial runs, and precision forming operations. Csdpfx Abox N Ulys Sopt Key Advantages - Rigid four-column press frame - Independent stroke and tonnage adjustment for ram and cushion - Full control via touchscreen panel - High precision and repeatability - Low maintenance cost and long service life Applications - Metal spinning and forming operations - Deep drawing applications - Die trial runs and prototype production - Auxiliary pressing operations ⚙️ STANDARD & TECHNICAL SPECIFICATIONS TYPE: Four-Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 units, induction-hardened chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 100 tons CAPACITY (CUSHION): 40 tons DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 600 mm STROKE (CUSHION): 200 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 700 mm WELDING STRESS RELIEF: Via vibration WELDING PROCEDURE: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 15 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT SPEED: 150 mm/s MOVABLE TABLE FORMING SPEED: 12 mm/s MOVABLE TABLE RETURN SPEED: 170 mm/s CUSHION TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE DIAMETER: Ø 230 mm – Ck45 CUSHION CYLINDER BORE DIAMETER: Ø 145 mm – Ck45 AUXILIARY BOOSTER CYLINDERS: 2 units APPROXIMATE PRESS HEIGHT: 3500 mm APPROXIMATE PRESS WIDTH: 1150 mm APPROXIMATE PRESS DEPTH: 1150 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1200 mm MAIN FILLING VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable from screen) RAM / CUSHION STROKE & TONNAGE ADJUSTMENT: Adjustable from screen SYSTEM & PRESS STATUS INFO: Viewable via display DIE MEMORY: Adjustable from screen LINEAR DISTANCE ENCODER: NOVATECHNIK or TURCK PLC APPLICATION: DELTA TOUCHSCREEN PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 7.5 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Sąlyga: naujas, Gamybos metai: 2025, spaudimo jėga: 80 t, stalo plotis: 700 mm, stalo ilgis: 700 mm, tarpas tarp stulpų: 700 mm, atitraukimo jėga: 30 t, eigos ilgis: 500 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH 80/30 TON COLUMN-TYPE HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 80/30 ton column-type hydraulic deep drawing press is an industrial press solution engineered for high-precision metal forming, deep drawing, and die testing applications, featuring a rigid four-column body construction. The ST52 grade steel frame is stress-relieved via vibration, ensuring high parallelism and perpendicularity tolerances are maintained during pressing operations. The ram and blank-holder systems operate independently; stroke and pressure settings are precisely controlled via the operator panel. Equipped with REXROTH or PARKER hydraulic components, an IE3 efficiency class motor, and PLC control, the system provides long service life, safety, and energy efficiency. An automatic lubrication system and filter contamination warnings minimize maintenance requirements. This model is an ideal solution for small and medium volume production, die testing, and precision forming applications. Key Advantages - Rigid 4-column press body - Independent stroke and tonnage adjustment for ram and blank-holder - Full control via touch panel - High repeatability and precision - Low maintenance cost, long service life Fields of Application - Metal forming operations - Deep drawing processes - Die testing and prototype production - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: 4-Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction hardened and chrome plated shafts GUIDE BEARING: Bronze Zr14 Cpsdpfox N Ultsx Ab Sot CAPACITY (RAM): 80 Ton CAPACITY (BLANK-HOLDER): 30 Ton DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 micron/meter PERPENDICULARITY TOLERANCE: 60 micron/meter RAM STROKE: 500 mm BLANK-HOLDER STROKE: 150 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 600 mm WELDING STRESS RELIEF: Vibration stress-relieving WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 11 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVABLE TABLE RAPID DESCENT SPEED: 150 mm/sec MOVABLE TABLE FORMING SPEED: 12 mm/sec MOVABLE TABLE RETURN SPEED: 170 mm/sec BLANK-HOLDER TABLE ADVANCE SPEED: 30 mm/sec MAIN CYLINDER BORE: Ø 200 mm – Ck45 BLANK-HOLDER CYLINDER BORE: Ø 125 mm – Ck45 AUXILIARY BOOSTER CYLINDERS: 2 Units APPROX. PRESS HEIGHT: 3300 mm APPROX. PRESS WIDTH: 1050 mm APPROX. PRESS DEPTH: 1050 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1100 mm PRE-FILL VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFFLINE FILTRATION: REXROTH or PARKER LUBRICATION METHOD: Automatic (adjustable via screen) RAM / BLANK-HOLDER STROKE AND TONNAGE CONTROL: Adjustable via screen SYSTEM & PRESS STATUS MONITORING: Viewable via operator screen DIE MEMORY: Adjustable via screen LINEAR POSITION ENCODER: NOVATECHNIK or TURCK PLC SYSTEM: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR: SIEMENS – SCHNEIDER APPROX. WEIGHT: 5.5 Tons

Sąlyga: naujas, Gamybos metai: 2025, spaudimo jėga: 2 500 t, stalo plotis: 1 800 mm, stalo ilgis: 2 600 mm, atitraukimo jėga: 800 t, eigos ilgis: 1 000 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 2500/800 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided Slideways General Description The CRONOSSTECH CHSP series H-type hydraulic forming presses have been developed for heavy-duty deep drawing applications that require very high tonnage, large table sizes, and precise blank holder force. The 8-guided H-frame body structure ensures high rigidity throughout the pressing process, maintaining parallelism and perpendicularity tolerances over long strokes. The CHSP 2500/800 model offers maximum stability, controlled material flow, and repeatable production performance for large and deep drawing dies, with a 2500-ton main ram and an 800-ton blank holder capacity. The stress-relieved steel construction body (vibration treated) is designed for robust and reliable long-term use in heavy industry environments. ⚙️ Standard Equipment • Steel construction, H-frame body type with 8 slideways • Vibration stress-relieved frame construction Cpedpfxox N Uk Aj Ab Sst • Bronze Zr14 slideway bearings • WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” DELTA touchscreen control panel • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronically controlled filter contamination warning • On-screen monitoring of hydraulic unit oil temperature and system status • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER switchgear components • Heavy-duty industrial safety systems 📐 Technical Specifications – CHSP 2500/800 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram / Blank Holder): 2500 / 800 Tons Moving / Fixed Table: 1800 × 2600 mm Parallelism / Perpendicularity: 120 / 60 micron/m Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 200 / 1200 mm Max. Operating Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Main Cylinder: Ø565 mm – Ck45 (4 units) Blank Holder Cylinder: Ø450 mm – Ck45 (2 units) Pre-Fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 132 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Sąlyga: naujas, Gamybos metai: 2025, spaudimo jėga: 2 000 t, stalo plotis: 1 500 mm, stalo ilgis: 2 500 mm, atitraukimo jėga: 600 t, eigos ilgis: 1 000 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 2000/600 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered for heavy-duty deep drawing applications requiring very high tonnage, large table dimensions, and precision-controlled blankholder force. Thanks to its 8-guide H-frame body construction, ram and table movements are carried out with high rigidity throughout the pressing cycle, maintaining parallelism and perpendicularity tolerances consistently over long strokes. The CHSP 2000/600 model offers high control and repeatability in deep drawing and spinning operations of large-scale dies, featuring 2000 tons main ram and 600 tons blankholder capacity. The stress-relieved welded steel construction is designed for long-term durability and reliability under heavy industrial conditions. ⚙️ Standard Equipment • Steel construction, 8-guide H-frame body type • Stress-relieved frame by vibration • Bronze Zr14 slideway bearings • WPQR and WPS certified welding by TÜRK-AK accreditations (EN ISO 15614-1:2017 / EN ISO 14731) • PLC controlled hydraulic system • Touchscreen operator panel (DELTA 7”) • Adjustable ram and blankholder stroke control • Adjustable ram and blankholder tonnage (pressure) control • Automatic central lubrication system • Electronic filter contamination warning • Real-time monitoring of hydraulic unit oil temperature and system status on the operator panel • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER switchgear • Industrial-grade safety systems for operator protection 📐 Technical Specifications – CHSP 2000/600 Type: Steel construction, 8-guide H-frame body type Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram / Blankholder): 2000 / 600 tons Movable / Fixed Table: 1500 × 2500 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blankholder): 1000 / 350 mm Daylight Opening (Min / Max): 200 / 1200 mm Max. Operating Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Main Cylinder: Ø720 mm – Ck45 (2 pcs) Blankholder Cylinder: Ø390 mm – Ck45 (2 pcs) Pre-fill Valve: NG 200 PLC / Operator Panel: DELTA / DELTA 7” Approximate Weight: 105 tons Cpodsx N Ukvspfx Ab Sot Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Sąlyga: naujas, Gamybos metai: 2025, spaudimo jėga: 1 500 t, stalo plotis: 1 500 mm, stalo ilgis: 2 400 mm, atitraukimo jėga: 500 t, eigos ilgis: 1 000 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 1500/500 H-Type Hydraulic Deep Drawing (Forming) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic forming presses are designed to provide maximum frame rigidity, precise parallelism, and long service life in deep drawing applications requiring very high tonnage and large table dimensions. Thanks to the 8-guideway H-frame structure, the movements of the ram and table during the pressing process are carried out in a controlled and stable manner. The CHSP 1500/500 model, with a 1500-ton main ram and a 500-ton blank holder capacity, is specifically developed for large-sized molds, deep drawing, and controlled forming operations. The vibration-stress relieved steel construction frame delivers high strength and reliability under heavy industry conditions. ⚙️ Standard Equipment • Steel construction, H-frame body with 8 guideways • Vibration-stress relieved frame structure • Bronze Zr14 guideway bearings • WPQR and WPS certified welding applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touchscreen panel (DELTA 7”) • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination warning • Hydraulic unit oil temperature and system status display on the screen • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER switchgear components • Industrial safety systems for operator protection 📐 Technical Specifications – CHSP 1500/500 Cpjdpfxex N Ukio Ab Sjt Type: Steel construction, H-frame body with 8 guideways Frame Material: St52 – ERDEMİR Guideway Bearings: Bronze Zr14 Capacity (Ram / Blank Holder): 1500 / 500 Ton Movable / Fixed Table: 1500 × 2400 mm Parallelism / Perpendicularity: 120 / 60 micron/m Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 200 / 1200 mm Max. Working Pressure: 250 Bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Main Cylinder: Ø620 mm – Ck45 (2 units) Blank Holder Cylinder: Ø360 mm – Ck45 (2 units) Pre-Fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 87 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Sąlyga: naujas, Gamybos metai: 2025, spaudimo jėga: 1 200 t, stalo plotis: 1 500 mm, stalo ilgis: 2 000 mm, atitraukimo jėga: 400 t, eigos ilgis: 1 000 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 1200/400 H-Type Hydraulic Deep Drawing (Stamping) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic stamping and deep drawing presses are engineered to deliver maximum rigidity, precision, and process control in sheet metal forming applications requiring high tonnage. The 8-guided H-frame body structure ensures stable maintenance of parallelism and squareness tolerances, even on large bed sizes. The CHSP 1200/400 model, with a 1200-ton main ram and 400-ton blankholder capacity, is tailored for heavy industry applications that require deep drawing, stamping, and controlled material flow. Its vibration stress-relieved welded steel frame offers durable and reliable performance for long-term operation. ⚙️ Standard Equipment • Steel construction, 8-guided H-frame press body • Vibration stress-relieved frame structure • Bronze Zr14 slideway bearings • Welding applications certified by WPQR and WPS with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” DELTA touch panel screen • Adjustable ram and blankholder stroke control • Adjustable ram and blankholder tonnage (pressure) control • Automatic lubrication system • Electronic filter contamination alert • Real-time monitoring of hydraulic oil temperature and system status on screen • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER electrical components • Industrial safety equipment for operator protection 📐 Technical Specifications – CHSP 1200/400 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram): 1200 Tons Capacity (Blankholder): 400 Tons Moving / Fixed Bed: 1500 × 2000 mm Parallelism / Squareness: 120 / 60 micron/m Stroke (Ram / Blankholder): 1000 / 350 mm Daylight (Min / Max): 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø560 mm – Ck45 (2 pcs) Blankholder Cylinder: Ø450 mm – Ck45 Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 75 Tons Csdpsx N Uirjfx Ab Sept Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Sąlyga: naujas, Gamybos metai: 2025, spaudimo jėga: 1 000 t, stalo plotis: 1 500 mm, stalo ilgis: 2 000 mm, atitraukimo jėga: 350 t, eigos ilgis: 1 000 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 1000/350 H Type Hydraulic Deep Drawing (Stamping) Press – 8-Guided Slide General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting (ram + cushion) system architecture for heavy-duty metal forming, deep drawing, and stamping applications. Thanks to its 8-guided H-frame structure, high rigidity is maintained throughout the pressing process, and parallelism and perpendicularity tolerances are stably preserved even with large table dimensions. The CHSP 1000/350 model, featuring a 1000-ton main ram and a 350-ton die cushion capacity, is specifically designed for deep drawing operations requiring controlled material flow, especially in the automotive, white goods, defense, and heavy industries. The steel construction frame is stress-relieved by vibration, providing long-lasting and reliable operation. Csdsx N Uiljpfx Ab Sjpt ⚙️ Standard Equipment • Steel construction, 8-guide H-frame press body • Vibration stress-relieved frame structure • Bronze Zr14 slide bearings • WPQR and WPS certified welding applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram and cushion stroke control • Adjustable ram and cushion tonnage (pressure) control • Automatic lubrication system • Electronic filter contamination warning control • Monitoring of hydraulic oil temperature and system status on display • Off-line filtration and cooling system • SIEMENS – SCHNEIDER switching components • Safety systems for operator protection 📐 Technical Specifications – CHSP 1000/350 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 1000 Tons Capacity (Cushion): 350 Tons Moving / Fixed Table: 1500 × 2000 mm Parallelism / Perpendicularity: 120 / 60 micron/m Stroke (Ram / Cushion): 1000 / 350 mm Daylight Opening (Min / Max): 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø500 mm – Ck45 (2 units) Cushion Cylinder: Ø370 mm – Ck45 Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 65 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Sąlyga: naujas, Gamybos metai: 2025, spaudimo jėga: 800 t, stalo plotis: 1 500 mm, stalo ilgis: 2 000 mm, atitraukimo jėga: 270 t, eigos ilgis: 1 000 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 800/270 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed based on the double-acting (ram + blankholder) working principle for high-tonnage sheet metal forming, deep drawing, and spinning applications. The 8-slide H-frame structure provides high rigidity, stable parallelism, and an extended die life even with large table dimensions during the pressing process. The CHSP 800/270 model, featuring 800 tons main ram and 270 tons blankholder capacity, has been developed for processes requiring controlled material flow, especially in automotive, white goods, defense industries, and heavy sheet metal forming applications. The vibration stress-relieved steel construction frame ensures long-lasting and reliable operation. ⚙️ Standard Equipment • Steel construction, 8-slide H-frame press body • Vibration stress-relieved frame structure • Bronze Zr14 slide bushings • WPQR and WPS certified welding applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touchscreen panel (DELTA 7”) • Adjustable ram and blankholder stroke control • Adjustable ram and blankholder tonnage (pressure) control • Automatic lubrication system • Electronically controlled filter contamination warning • Monitoring of hydraulic unit oil temperature and system status via display • Off-line filtration and cooling system • SIEMENS – SCHNEIDER electrical switch gear • Safety systems for operator protection 📐 Technical Specifications – CHSP 800/270 Type: Steel construction, 8-slide H-frame press body Frame Material: St52 – ERDEMİR Slide Bushing: Bronze Zr14 Capacity (Ram): 800 Tons Capacity (Blankholder): 270 Tons Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Squareness Tolerance: 60 micron/m Stroke (Ram): 1000 mm Stroke (Blankholder): 350 mm Min. / Max. Daylight: 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø390 mm – Ck45 (2 units) Blankholder Cylinder: Ø370 mm – Ck45 Pre-fill Valve: NG 200 PLC: DELTA Touchscreen Panel: DELTA 7” Approximate Weight: 54 Tons Production Note Cpsdpfex N Uh Uex Ab Sst This machine is manufactured by CRONOSSTECH in Turkey.

Sąlyga: naujas, Gamybos metai: 2025, spaudimo jėga: 500 t, stalo plotis: 1 200 mm, stalo ilgis: 1 500 mm, atitraukimo jėga: 175 t, eigos ilgis: 1 000 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 500/175 H-Type Hydraulic Deep Drawing (Cupping) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting operating principle to ensure controlled material flow in sheet metal forming, deep drawing, and cupping operations. Thanks to the 8-guided H-frame body structure, maximum rigidity is maintained during pressing; parallelism and perpendicularity tolerances are consistently preserved throughout the long stroke. The CHSP 500/175 model, featuring a 500-ton main ram and a 175-ton cushion (blank holder) capacity, is designed to provide absolute control over the die and workpiece during high-tonnage deep drawing and cupping operations. The frame construction is stress-relieved by vibration to ensure long-lasting and reliable performance. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Vibration stress-relieved body structure - Bronze Zr14 slideway bearings - WPQR and WPS welding procedures approved and accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - Touch panel screen (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 500/175 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram): 500 Ton Capacity (Cushion): 175 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Stroke (Cushion): 350 mm Min. Daylight: 100 mm Cpedpox N Uhujfx Ab Sst Max. Daylight: 1100 mm Weld Stress Relieving: Vibration stress relief Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Welding operations are supervised by "welding coordination engineers" certified according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 45 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Table Forward Speed: 30 mm/s Main Cylinder Inner Diameter: Ø500 mm – Ck45 Cushion Cylinder Inner Diameter: Ø300 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Press Height: 5800 mm Approximate Press Width: 3250 mm Approximate Press Depth: 2200 mm Bottom Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Screen: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 26 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Sąlyga: naujas, Gamybos metai: 2025, spaudimo jėga: 400 t, stalo plotis: 1 200 mm, stalo ilgis: 1 500 mm, atitraukimo jėga: 150 t, eigos ilgis: 1 000 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 400/150 H-Type Hydraulic Deep Drawing (Stamping) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting operating principle to ensure controlled material flow in sheet metal forming, deep drawing, and stamping applications. Thanks to the 8-guide H-frame design, maximum rigidity is maintained during the pressing operation, while parallelism and perpendicularity tolerances are stably preserved throughout the long stroke. The CHSP 400/150 model, featuring a 400-ton main ram and a 150-ton blankholder (cushion) capacity, is designed for deep drawing and stamping applications requiring high tonnage. The machine frame is stress-relieved via vibration to guarantee durable and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Stress-relieved frame structure via vibration - Bronze Zr14 slide bearings Cpsdpjx N Uhhefx Ab Set - WPQR and WPS approved welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically controlled filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 400/150 - Type: Steel construction, 8-guide H-frame press body - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 400 Ton - Capacity (Cushion): 150 Ton - Moving Table Dimensions: 1200 × 1500 mm - Fixed Table Dimensions: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Stroke (Cushion): 350 mm - Min. Clear Opening: 100 mm - Max. Clear Opening: 1100 mm - Weld Stress Relief: Vibration-based stress relieving - Welding Application: WPQR and WPS approved, TÜRK-AK accredited - EN ISO 15614-1/2017 - (Welding applications are supervised by "welding coordination engineers" certified per EN ISO 14731) - Max. Operating Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Moving Table Fast Descent Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Cushion Table Forward Speed: 30 mm/sec - Main Cylinder Inner Diameter: Ø450 mm – Ck45 - Cushion Cylinder Inner Diameter: Ø280 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approximate Machine Height: 5600 mm - Approximate Machine Width: 3250 mm - Approximate Machine Depth: 2200 mm - Height of Lower Table from Floor: 1400 mm - Pre-fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Display: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approximate Weight: 24 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Sąlyga: naujas, Gamybos metai: 2025, spaudimo jėga: 300 t, stalo plotis: 1 200 mm, stalo ilgis: 1 500 mm, atitraukimo jėga: 100 t, eigos ilgis: 800 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 300/100 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided Slideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting operating principle to ensure controlled material flow in sheet metal forming, deep drawing, and forming applications. Thanks to its H-frame structure with 8 slideways, maximum rigidity is assured during pressing, while parallelism and perpendicularity tolerances remain stable throughout the long stroke. The CHSP 300/100 model is designed for deep drawing and forming operations that require high tonnage, featuring a 300-ton main ram and a 100-ton cushion ram (blank holder). The frame construction undergoes stress relief by vibration to ensure durability and reliable operation over its lifetime. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame press body - Stress-relieved frame structure by vibration - Bronze Zr14 slideway bushings - WPQR and WPS welding procedures approved by TURK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacture in compliance with CE standards - PLC controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram and cushion (pot) stroke control - Adjustable ram and cushion (pot) tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Real-time display of hydraulic unit oil temperature and system statuses on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 300/100 - Type: Steel construction, 8-guideway H-frame press body - Frame Material: St52 – ERDEMİR - Slideway Bushings: Bronze Zr14 - Capacity (Ram): 300 tons - Capacity (Cushion): 100 tons - Movable Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 microns/meter - Perpendicularity Tolerance: 60 microns/meter - Stroke (Ram): 800 mm - Stroke (Cushion): 300 mm - Min. Daylight: 100 mm - Max. Daylight: 900 mm - Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS accredited by TURK-AK - EN ISO 15614-1/2017 - Welding operations are overseen by “welding coordination engineers” certified according to EN ISO 14731 - Max. Working Pressure: 250 bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Movable Table Fast Down Speed: 150 mm/s - Movable Table Forming Speed: 12 mm/s - Movable Table Return Speed: 170 mm/s - Cushion Table Advance Speed: 30 mm/s - Main Cylinder Bore: Ø390 mm – Ck45 - Cushion Cylinder Bore: Ø230 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approximate Height: 4400 mm - Approximate Width: 3250 mm - Approximate Depth: 2200 mm - Lower Table Height from Floor: 1350 mm - Pre-Fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER Cpsdpex N Uhbsfx Ab Sst - Linear Position Transducer: NOVATECHNIK or TURCK - PLC System: DELTA - Touchscreen Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 21 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Sąlyga: naujas, Gamybos metai: 2025, spaudimo jėga: 250 t, stalo plotis: 1 200 mm, stalo ilgis: 1 500 mm, atitraukimo jėga: 80 t, eigos ilgis: 800 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 250/80 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Gib Guides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting operating principle to ensure controlled material flow in sheet metal forming, deep drawing, and metal spinning applications. The 8-gib H-frame design provides maximum rigidity during pressing operations, while parallelism and perpendicularity tolerances are steadily maintained throughout the stroke. The CHSP 250/80 model—with 250-ton main ram and 80-ton blankholder (cushion) capacity—is intended for medium- to high-tonnage deep drawing and spinning operations. The machine frame is stress-relieved via vibration for long-term durability and reliable operation. ⚙️ Standard Equipment - Welded steel construction, 8-gib H-frame press body - Vibratory stress-relieved frame structure - Bronze Zr14 gib slideways - Weld seam applications approved according to WPQR and WPS with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - Hydraulic unit oil temperature and system status monitoring via screen - Cooling system - Off-line filtration Cpodpfxox N Uaqe Ab Sot - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHSP 250/80 - Type: Welded steel, 8-gib H-frame press body - Frame Material: St52 – ERDEMİR - Gib Slideways: Bronze Zr14 - Capacity (Ram): 250 tons - Capacity (Cushion): 80 tons - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Stroke (Cushion): 300 mm - Min. Daylight: 100 mm - Max. Daylight: 900 mm - Stress Relief: Vibration stress relief - Weld Application: WPQR and WPS certified by TÜRK-AK, approved according to EN ISO 15614-1/2017. Weld operations are overseen by certified “welding coordination engineers” per EN ISO 14731. - Max. Operating Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Fast Down Speed of Moving Table: 150 mm/s - Drawing Speed of Moving Table: 12 mm/s - Return Speed of Moving Table: 170 mm/s - Cushion Table Advance Speed: 30 mm/s - Main Cylinder Bore: Ø360 mm – Ck45 - Cushion Cylinder Bore: Ø200 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 pcs - Approx. Press Height: 4200 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2200 mm - Lower Table Height from Floor: 1350 mm - Main Charge Valve: NG 125 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Measuring Ruler: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 18 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Sąlyga: naujas, Gamybos metai: 2025, spaudimo jėga: 200 t, stalo plotis: 1 000 mm, stalo ilgis: 1 200 mm, atitraukimo jėga: 70 t, eigos ilgis: 800 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 200/70 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed using a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. Thanks to the 8-guided H-frame construction, the press provides maximum rigidity during operation, and parallelism and perpendicularity tolerances are consistently maintained throughout the stroke. The CHSP 200/70 model, with a 200-ton main ram and a 70-ton lower cushion (pot), is designed for medium to high tonnage deep drawing and spinning operations. The frame construction is stress-relieved by vibration method, aiming for long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 slideway bushings - Welded structure with WPQR and WPS approval by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing according to CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 200/70 - Type: Steel construction, 8-guideway H-frame press body - Frame Material: St52 – ERDEMİR - Slideway Bushings: Bronze Zr14 - Capacity (Ram): 200 Tons - Capacity (Cushion): 70 Tons - Moving Table Dimensions: 1000 × 1200 mm - Fixed Table Dimensions: 1000 × 1200 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Stroke (Cushion): 300 mm - Min. Daylight: 100 mm - Max. Daylight: 900 mm - Weld Stress Relief: Vibratory stress relief - Welding Application: WPQR and WPS approved by TÜRK-AK accredited supervisors, EN ISO 15614-1/2017 (Welding applications are overseen by certified "welding coordination engineers" according to EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 22 kW – IE3 - Main Pump: 32 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Cushion Table Forward Speed: 30 mm/sec - Main Cylinder Bore Diameter: Ø320 mm – Ck45 - Cushion Cylinder Bore Diameter: Ø190 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 3800 mm - Approx. Press Width: 2950 mm - Approx. Press Depth: 2200 mm - Lower Table Height from Floor: 1350 mm - Main Pre-fill Valve: NG 125 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Sensor: NOVATECHNIK or TURCK - PLC Application: DELTA Codpfx Abox N T U Ts Sept - Touchscreen Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 13.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Sąlyga: naujas, Gamybos metai: 2025, spaudimo jėga: 150 t, stalo plotis: 1 000 mm, stalo ilgis: 1 200 mm, atitraukimo jėga: 50 t, eigos ilgis: 600 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 150/50 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting mechanism to ensure controlled material flow during sheet metal forming, deep drawing, and spinning applications. The 8-guided H-frame structure delivers maximum rigidity throughout the pressing process, maintaining stable parallelism and perpendicularity tolerances along the stroke. The CHSP 150/50 model features a 150-ton main ram and a 50-ton blank holder ram (cushion), specifically designed for precise and repeatable deep drawing operations. The frame construction is stress-relieved by vibration, ensuring reliable and long-lasting performance. ⚙️ Standard Equipment - Steel construction H-frame body with 8 slider guides - Vibration stress-relieved frame design - Bronze Zr14 slide bearings - WPQR and WPS certified welding by TÜRK-AK accredited inspector (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion force (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - Display for monitoring hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 150/50 - Type: Steel construction H-frame with 8 slider guides - Frame Material: St52 – ERDEMİR - Slide Bearing: Bronze Zr14 - Main Ram Capacity: 150 tons - Cushion Capacity: 50 tons - Moving Table Size: 1000 × 1200 mm - Fixed Table Size: 1000 × 1200 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Ram Stroke: 600 mm - Cushion Stroke: 200 mm - Min. Daylight: 100 mm - Max. Daylight: 700 mm - Weld Stress Relief: Vibration - Welding Procedure: WPQR and WPS approved by TÜRK-AK, EN ISO 15614-1/2017 (All welding operations supervised by certified Welding Coordination Engineers in accordance with EN ISO 14731) - Max. Operating Pressure: 250 Bar - Total Motor Power: 18.5 kW – IE3 - Main Pump: 32 cm³ – REXROTH or PARKER - Fast Down Speed of Moving Table: 150 mm/sec - Spinning Speed of Moving Table: 12 mm/sec - Return Speed of Moving Table: 170 mm/sec - Cushion Forward Speed: 30 mm/sec - Main Cylinder Bore: Ø280 mm – Ck45 - Cushion Cylinder Bore: Ø160 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 pcs - Approximate Press Height: 3650 mm - Approximate Press Width: 2950 mm - Approximate Press Depth: 2000 mm - Fixed Table Height from Floor: 1250 mm - Main Pre-Fill Valve: NG 100 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Measurement Sensor: NOVATECHNIK or TURCK - PLC Control: DELTA - Touchscreen Panel: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approximate Weight: 11 tons Production Note Cpedox N T U Hjpfx Ab Sot This machine is manufactured by CRONOSSTECH in Turkey.

Sąlyga: naujas, Gamybos metai: 2025, spaudimo jėga: 100 t, stalo plotis: 1 000 mm, stalo ilgis: 1 200 mm, atitraukimo jėga: 40 t, eigos ilgis: 600 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 100/40 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guide Rails General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting working principle to ensure controlled material flow during sheet metal forming, deep drawing, and spinning applications. The 8-guide H-frame structure provides maximum rigidity during the pressing cycle; parallelism and perpendicularity tolerances are stably maintained throughout the stroke. The CHSP 100/40 model, featuring a 100-ton main ram and a 40-ton lower cushion (pot) capacity, is engineered for precise deep drawing and spinning operations. The frame construction is stress relieved by vibration, ensuring long lifespan and reliable operation. ⚙️ Standard Equipment - Steel construction, H-frame type with 8 slide guides - Stress-relieved frame structure by vibration - Bronze Zr14 slide guide bushings - WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel screen (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitoring via screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 100/40 - Type: Steel construction, H-frame type with 8 slide guides - Frame Material: St52 – ERDEMİR - Slide Guide Bushings: Bronze Zr14 - Capacity (Ram): 100 Ton - Capacity (Cushion): 40 Ton - Moving Table Size: 1000 × 1200 mm - Fixed Table Size: 1000 × 1200 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Ram Stroke: 600 mm - Cushion Stroke: 200 mm - Min. Daylight: 100 mm - Max. Daylight: 700 mm - Weld Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS approved, accredited by TÜRK-AK EN ISO 15614-1:2017 (Supervised by certified welding coordination engineers according to EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 11 kW – IE3 - Main Pump: 22 cm³ – REXROTH or PARKER - Moving Table Rapid Down Speed: 150 mm/s - Moving Table Drawing Speed: 12 mm/s - Moving Table Return Speed: 170 mm/s - Cushion Advance Speed: 30 mm/s - Main Cylinder Bore: Ø230 mm – Ck45 - Cushion Cylinder Bore: Ø140 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approximate Height: 3400 mm - Approximate Width: 2950 mm - Approximate Depth: 2000 mm - Bottom Table Height from Floor: 1250 mm - Pre-fill Valve: NG 100 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Distance Scale: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Panel Screen: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 9 Tons Cpjdex N T Uyepfx Ab Sjt Production Note This machine is manufactured by CRONOSSTECH in Turkey.