Suslėgto Oro Džiovintuvai pirkti naudotą (11 814)

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Amano PiA-30U Entstauber Gedperyxmxsfx Aczjtt Guter Betriebszustand. Bitte sehen Sie sich auch unsere weiteren Angebote an.

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Gtedpfx Acovz Hq Tezot Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They have been developed for heating larger utility spaces such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no extended heat-up phases and can quickly warm up joinery, carpentry, or other production facilities. Solid wood and its by-products—e.g., solid wood board offcuts, chips, sawdust, pellets, or briquettes—serve as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety provisions of Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of required emission values according to the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output (kcal): 73,000 - Fuel consumption: 19 kg/h - Air flow rate: 6,400 m³/h - Firebox depth: 840 mm - Loading door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at rated load: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heat coverage area: approx. 300 m² - Space requirement: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue connection diameter: 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 291°C - Hot air outlet port: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connections for the air outlet are located at the lower rear section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3018/13, bakelio talpa: 200 l, bendras ilgis: 1 000 mm, bendras plotis: 500 mm, bendras aukštis: 1 470 mm, bendras svoris: 93 kg, darbinė temperatūra: 55 °C, slėgis (maks.): 10 juosta, Įranga: CE žymėjimas, Aircraft suslėgto oro technologija, KB 2x100/10 talpyklų baterija, labai gera būklė, pagaminimo metai 2013. Godpfx Acex Ext Hjzott Įrenginys yra patikrintas pagal tipą, todėl TÜV apžiūra nereikalinga. Yra jungiamieji vožtuvai ir manometras.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, rida: 76 430 km, pirmoji registracija: 04/2018, pavaros tipas: automatinis, krovimo vietos ilgis: 4 300 mm, krovinių skyriaus plotis: 2 050 mm, krovos erdvės aukštis: 1 830 mm, Įranga: AdBlue, Bluetooth, navigacijos sistema, oro kondicionavimas,

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 300 mm, transporto ilgis: 7 500 mm, tūrio srautas: 40 000 m³/val, bendras ilgis: 7 500 mm, consisting of: 1. CEFLA FEV E Dryer: LAMINAR FLOW DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW 2. CEFLA FEV EU Dryer: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW 3. CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU 4. CEFLA TR 3000 Roller Conveyor Heating medium - electric Installed electrical power for both dryers: approx. 210 kW 1. CEFLA FEV E Dryer: LAMINAR FLOW DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. Equipped with a laminar hot air flow in the opposite direction to the panel feed and with adjustable recirculation. Overall length: 7,500 mm Working width: 1,300 mm Total width: 1,783 mm Max. drying height: 1,780 mm (excluding conveyor) Usable pass-through height: 80 mm Exhausted solvent-laden air: 0–4,000 m³/h Machine control via LCD 5.7" touch panel VS spark-proof supply/recirculation fan: Power: 2.2 kW; Flow rate: 40,000 m³/h; Air supplied to room: 0–4,000 m³/h; Installed heating power: 76,400 kcal/h (heating coil 90 kW) 2. CEFLA FEV EU Dryer: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 115 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. Equipped with a laminar hot air flow in the opposite direction to the panel feed and with adjustable recirculation. Overall length: 7,500 mm Working width: 1,300 mm Total width: 1,783 mm Max. drying height: 1,780 mm (excluding conveyor) Gtjdpfx Ajw H Aw Sjczot Usable pass-through height: 80 mm Installed electric power: 115 kW Exhausted solvent-laden air: 0–4,000 m³/h Machine control via LCD 5.7" touch panel VS spark-proof supply/recirculation fan: Power: 2.2 kW; Flow rate: 40,000 m³/h; Output: 1.5 kW; Air supplied to room: 0–4,000 m³/h; Installed heating power: 76,400 kcal/h PR frost protection for N.1 heating battery, with probe and automatic control of shut-off damper 3. CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives, highly efficient for increased heat exchange thanks to high air velocity. The ventilation unit consists of: - Supply and recirculation fan: 3 kW; Flow rate: 6,000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6,000 m³/h Digital ventilation adjustment via touchscreen. The air knives are installed transversely across the entire tunnel area. Air knife outlet speed max. 32.5 m/sec Overall length: 3,000 mm Usable width: 1,300 mm Total width: 1,783 mm Usable pass-through height: 80 mm Max. tunnel height: 1,780 mm (excluding conveyor) Installed electric power: 4.5 kW Machine control via LCD 5.7" touch TT 4000 rod conveyor with double chain, steel guides, and chrome-plated rods. 4. CEFLA TR 3000 Roller Conveyor Motorized rollers coated with PVC Length: 3,000 mm Photoelectric barrier for thin panels, thickness 4 mm (Technical specifications subject to change and errors, prior sale reserved)

Sąlyga: geras (naudotas), High-quality Airpad machine from a renowned manufacturer. Suitable for the production of individually defined air-filled protective and void fill elements made from PA and PE film, as well as paper air cushions. Each work cycle typically produces four air cushions, and different formats can be manufactured. Ten programs are available for storing multiple parameters. By selecting the appropriate program via the display, air cushions from 4 cm to 16 cm in length and with a custom-defined fill level can be produced. The resulting air cushion strips are wound onto rolls using a motorized device. When the roll is full, the machine switches off automatically. The finished roll can then be removed manually and subsequently used as packaging material. The machine can be moved on rollers and secured in place with brakes. A demonstration under power is possible. Gtodpokkcqqefx Aczjt

Sąlyga: beveik kaip naujas (parodų įrenginys), Visiškai naujas, nenaudotas. Prašome peržiūrėti ir kitus mūsų skelbimus. Gtsdpfx Acju Uth Hezst

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are an ideal solution for energy recovery in wood-processing industrial and craft businesses. They are designed to heat large areas, such as workshops and working spaces in trade and industrial operations. These hot air systems require no lengthy warm-up phases and can heat up workshop halls of joineries or carpentries, as well as other production facilities, in a very short time. Solid wood and its by-products (e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes) serve as fuel materials. The MARTINA hot air furnaces comply with EU Directive 98/37CE and Italian Presidential Decree No. 459 dated July 24, 1996, as well as the safety directive of 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission stages according to the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output Kcal: 43,000 - Fuel consumption: 15 kg/h - Air output: 4,900 m3/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm Godpovz Hq Hofx Aczstt - Hot air blower: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 1,000 m3 - Heatable area: approx. 220 m2 - Space requirement: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (collar): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney discharge pressure: 13 PA - Flue gas temperature: 290°C - Hot air outlet spigots: 2 x Ø 200 mm - For additional technical data, please refer to the attached data sheet The two pipes for outgoing hot air are located at the lower part of the rear side of the furnace. A maximum of 20 meters of ducting per spigot is permitted for air distribution.

Sąlyga: geras (naudotas), Filter (Luftfilter) -Typ: MS 246 ALR Gtedpfxob S Htao Aczot -Abmessungen: 305 x 305 x H246 mm -Gewicht: 40 kg

Sąlyga: naudotas, Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, Mašinos tipas: Alyvos nenaudojantis oro kompresorius • Produkto pavadinimas: ZH 7000-6 • CE žymėjimas: Taip Gamintojas • Gamintojas: Atlas Copco • Gamybos šalis (pagal tipinę lentelę): Belgija Identifikacija • Tipas: ZH7000-6-7 • Serijinis numeris: AIF124949 Godpsx Iudtjfx Aczett • Gamybos metai: 2007 Techniniai duomenys (tipinė lentelė) • Didžiausias darbinis slėgis: 7,7 bar(e) 112 psig • Įėjimo galia: 620 kW 831 AG • Veleno apsukos: 2 980 aps./min Valdymas ir eksploatavimas • Valdymo sistema: Elektronikon® • Integruotas ekranas su membranine klaviatūra • Avarinio stabdymo mygtukas priekinėje plokštėje

Gamybos metai: 2015, Sąlyga: labai geros būklės (naudotas), Clean air workbench Heraguard HPH 15 Thermo Scientific Used, located in Cologne Regularly maintained Gtodpfxsiv S Agj Aczot Laboratory liquidation, various microscopes and additional equipment available on request

Gamybos metai: 1990, veikimo valandos: 23 710 h, Sąlyga: paruoštas naudoti (naudotas),

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, nominali srautas: 30 000 m³/val, Dulkių surinkimo silosas ir dulkėto oro filtravimo įrenginys. Dulkių sandėliavimas: 30 m³. Oro filtravimas: oro našumas 30 000 m³/h. Siurblys: 45 kW. Elektros valdymo skydas. Gedpfx Acox Tcfvozstt

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces are an ideal solution for energy utilization in wood-processing industrial and craft businesses. They have been developed for heating large utility areas, such as workshops and working spaces of trade and industrial enterprises. These hot air systems require no long heat-up phases and heat up woodworking shops, carpentries, and other production areas within a very short time. The furnaces can use solid wood and its by-products as fuel, e.g. solid wood panel residues, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and safety guideline Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of emission limits stipulated by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2–0.3 mbar - Flue draft requirement at nominal output: 0.18 mbar - Heatable room volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space requirement: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connection): 300 mm Gtsdpfovz Hqyox Aczst - Chimney diameter (reference value): 350 mm - Efficiency: 85–90% - Chimney draft: 11.5 Pa - Flue gas temperature: 289°C - Hot air discharge nozzles: 2 x Ø 450 mm - For additional data, please refer to the data sheet. The two pipe fittings for outgoing hot air are located at the rear of the furnace near the bottom. For each pipe fitting, a maximum pipe length of 20 meters is allowed for air distribution. Longer lengths are optionally available upon arrangement with the manufacturer. Please contact us for more details.

Sąlyga: labai geros būklės (naudotas), Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter enclosure, generator air filter -Manufacturer: Mann + Hummel, Piclon air filter with filter element -Filter type: C 30 850/2 Gtjdpfxoh Ra Hco Aczot -Maintenance indicator: Knecht TB 745/1 -Quantity: 1x air filter available -Dimensions: 700/403/H610 mm -Weight: 21 kg

Sąlyga: naudotas, Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, • Įrenginio tipas: Alyvos nenaudojantis oro kompresorius • Produkto pavadinimas: ZR 500 VSD • CE žymėjimas: Taip (CE 0038) Gamintojas • Gamintojas: Atlas Copco • Gamybos vieta (pagal tipinę lentelę): Pagaminta Belgijoje Identifikacija • Tipas: ZR 500 VSD • Serijos numeris: AIF118346 • Pagaminimo metai: 2007 Techniniai duomenys (pagal tipinę lentelę) • Didžiausias darbinis slėgis: 8,60 bar(e) • Įėjimo galingumas: 497 kW • Veleno apsukos: 2 180 sūkių/min Gtsdpjx Iuc Aefx Aczot Valdymas ir eksploatavimas • Valdymo sistema: Elektronikon® (nurodyta valdymo pultelyje) • Integruotas ekranas su membranine klaviatūra • Avarinio stabdymo mygtukas priekinėje panelėje

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces are an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger functional areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems require no long heat-up phases and warm up the workshop or production hall—such as those in carpentry, joinery, or other manufacturing environments—in a very short time. Suitable fuels include solid wood and its by-products, e.g. solid wood board offcuts, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated 24 July 1996, and the safety directive of installation 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, 350) meet both emission stages required by the 1st BImSchV (Federal Emission Control Ordinance). - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 Kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm Godpjvz Hqtsfx Aczstt - Loading door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Hot air outlet connectors: 2 x Ø 200 mm - For further specifications, please refer to the attached data sheet The two duct connectors for warm air outlet are located at the lower rear side of the unit. A maximum pipe length of 20 meters per connector is permitted for air distribution.

Sąlyga: labai geros būklės (naudotas), Oro filtras Gtjdpfxjb A Iwlo Aczst -Tipas: 6.0690.16.7.0110 -Kiekis: yra 8 vnt. -Kaina: už vienetą

Sąlyga: naudotas, Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, • Machine type: Refrigerated Air Dryer • Product designation: FD 2400 VSD • CE-marked: Yes (CE 0038) Manufacturer • Manufacturer: Atlas Copco Airpower n.v. • Manufacturing location: Wilrijk, Belgium • Brand name on housing: Atlas Copco Identification • Type: FD 2400 VSD • Serial number: AIF125258 • Year of manufacture: 2007 Godpfsx Iub Ejx Aczett Electrical data • Supply voltage: 400 V • Frequency: 50 Hz • Electrical power: 3.5 kW • Phase: as indicated on the nameplate (exact number of phases not specified) Operating data • Maximum compressed air pressure (Pmax): 13 bar(e) • Maximum air temperature (Tmax): 55 °C • Ambient temperature range: Max: 45 °C Min: 3 °C Cooling system • Refrigerant type: R404A • Refrigerant charge: 15 kg • Maximum refrigerant pressure (high-pressure side): 29 bar • Refrigerant pressure on low-pressure side: not specified Weight • Machine weight: 1,180 kg Control and interfaces • Control system: Elektronikon® (as indicated on the control panel) • Integrated display and membrane keypad on the front door

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed to heat larger usable spaces such as production halls and work areas in trade and industrial facilities. These hot air systems require no lengthy heat-up phases and can quickly warm up carpentry or joinery workshops as well as other manufacturing sites. Fuel types include solid wood and its by-products, such as remnants of solid wood boards, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety directive of Equipment 89/392/CE. All MARTINA series hot air furnaces (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission threshold stages required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air mode - Thermal output: 29.8 kW - Thermal output (Kcal): 25,700 - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox underpressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 600 m³ - Heatable surface area: approx. 120 m² - Footprint: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg - Flue outlet diameter (collar): 160 mm Gtjdevz Hqmepfx Aczot - Chimney diameter (reference value): 200 mm - Efficiency: 85–90% - Chimney draft: 11 Pa - Exhaust gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet The two pipe collars for the outgoing hot air are located on the rear side of the furnace in the lower section. A maximum pipe length of 20 metres is permitted per collar for air distribution.

Sąlyga: naudotas, Oro vamzdžių paketo ekstraktorius, oro vamzdžių paketo montavimo stotis šilumokaičiams, aušinimo spiralėms, aušinimo vamzdžiams, aušinimo spiralei, vamzdžių paketiniams šilumokaičiams - Perdavimo sąlygos: esama būsena, kaip apžiūrėta (be dokumentacijos) - Būklė: dyzelinis variklis šiuo metu neveikia - Oro vamzdžių paketo ekstraktorius: Hydro-Extractors INC - Tipas: 504- Diesel - Matmenys: 8400/1900/H2850 mm - Transportavimo matmenys: 8400/1900/H1700 mm Gjdpew Ty Dnjfx Aczott - Svoris: 6860 kg

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total connected load: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and craft businesses. They are designed for heating large usable spaces such as workshops and production areas in craft or industrial enterprises. These hot air systems do not require long heating-up phases and are capable of rapidly warming up joinery and carpentry workshops or other production facilities. The units can burn solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree No. 459 of 24 July 1996, and safety guideline 89/392/EEC. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output (kcal): 199,000 - Fuel consumption: 50 kg/h - Airflow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air fan: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Nominal output draft requirement: 0.18 mbar - Heatable volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space required: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90 % Gedpfevz Hqgex Aczstt - Chimney fan pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet connections: 2 x Ø 450 mm - Further data available in the attached data sheet The two duct connections for outgoing hot air are located on the lower rear side of the unit. A maximum of 20 meters of duct per outlet is allowed for air distribution.

Sąlyga: geras (naudotas), Gamybos metai: 1998, air receiver, pressure vessel, pressure tank, compressed air tank, compressed air vessel, compressor tank - Manufacturer: Maschinen- und Behälterbau, vertical air receiver - Capacity: 3,000 l - Working pressure: 11 bar Gtodpfophun Esx Aczst - Accessories: incl. mounted components, see photos - Dimensions: Ø 1,475 x 2,760 mm - Weight: 700 kg

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Warm Air Furnace MARTINA 120 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. They have been developed for heating larger areas, such as workshops and production halls in both craft and industrial operations. These warm air systems require no lengthy preheating times and are capable of warming up joinery or carpentry workshops and other production facilities in a very short period. The furnace can be fueled with solid wood and its by-products, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guideline of Directive 89/392/EEC. All warm air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) fulfill both stages of the emission limits required by the 1st Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air performance: 9,000 m³/h - Combustion chamber depth: 950 mm - Loading door: 460 x 440 mm - Warm air blower: 1.05 kW / 230 V - Combustion chamber negative pressure: 0.2–0.3 mbar - Flue draught at nominal load: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Required space: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm - Chimney diameter (recommendation): 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 287°C Gtodpfx Acjvz Hhxszot - Warm air outlet nozzles: 2 x Ø 220 mm - For further data, please refer to the enclosed data sheet The two pipe connectors for outgoing warm air are located at the rear bottom side of the furnace. A maximum pipe length of 20 meters per nozzle is permitted for air distribution.

Sąlyga: geras (naudotas), Rotary actuator for air dampers, air damper rotary actuator -Shaft mounting (hollow shaft): approx. Ø 32 mm -24 VAC -Protection class: IP 54 -20 Nm 90° -Price: per unit Gsdjb A H N Rspfx Aczott -Quantity: 1x available -Weight: 1.8 kg