Sraigtiniai Oro Kompresoriai pirkti naudotą (15 519)

Būklė: naudotas, Screw Compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6 Cpsdpfxofmim Ue Aahsw Serial No. 6240330200 Year of manufacture: 2003 Free air delivery: 4.6 m³/min Operating pressure: 10 bar Main motor power: 30 kW Power supply: 400 Volt, 50 Hz Connection thread: 1 1/2 inch - 36,004 switch-on hours (read off) - 19,256 load hours (read off) - Sound-insulated Dimensions (L x W x H): 1850 x 1050 x 1760 mm Weight: 910 kg In good condition

Būklė: naudotas, Screw Compressor KAESER Type BS 50 Serial No. 402852 Year of manufacture: 1990 Cjdpfx Aaoiyu Ifohepw Volume flow rate: 5 m³/min Pressure output: 7.5 bar Main motor power: 30 kW Power supply: 400 Volt, 50 Hz Connection thread: 1 1/2" inch - 1107.9 operating hours (read off) - 749.0 load hours (read off) - Sound-insulated Space requirement (L x W x H): 1600 x 1070 x 1350 mm Weight: 900 kg Very good condition Was used as a backup compressor and has only few operating hours

Gamybos metai: 2011, būklė: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, bendras svoris: 500 kg, bendras ilgis: 2 000 mm, bendras plotis: 1 000 mm, bendras aukštis: 2 400 mm, slėgis: 12,75 juosta, mašinos/transporto priemonės numeris: CAI709141, Nėra minimalių kainų – garantuotas pardavimas didžiausią kainą siūliusiam! Pasiūlymas įpareigoja laiku atsiimti: arba nuo 2026-05-11 iki 2026-05-13, arba nuo 2026-05-18 iki 2026-05-21! TECHNINĖ INFORMACIJA Didžiausias slėgis: 12,75 bar ĮRANGOS DUOMENYS Darbinė įtampa: 230 V Dažnis: 50 Hz Kompresoriaus įtampa: 400 V Kompresoriaus dažnis: 50 Hz Jungiamoji galia: 3 kW Matmenys ir svoris Matmenys (I x P x A): 2.000 x 1.000 x 2.400 mm Svoris: 500 kg Išorinė nuoroda: Pieper – Lot 55 Codpsym Rqfsfx Aahspw

Gamybos metai: 1994, būklė: geras (naudotas), Manufacturer: Boge Model: V LEX 45 Csdshtq Dvjpfx Aahepw Motor: 45 kW Capacity: 6.5 m³/min

Būklė: geras (naudotas), Gamybos metai: 2010, The unit has been well maintained. Comp. Air Pmax: 13 bar Refrigerant Pmax High: 18.7 bar Electrical connection data: 230 V / 50 Hz, 1 kW, single phase Width: 460 mm Depth: 500 mm Cedpfx Asvmqkheahjpw Height: 830 mm Weight: 60 kg

Būklė: naujas, Gamybos metai: 2022, veikimo valandos: 5 h, Funkcionalumas: visiškai funkcionalus, bendras svoris: 290 kg, bendras ilgis: 1 430 mm, bendras plotis: 660 mm, bendras aukštis: 1 250 mm, kuro tipas: elektrinis, tūrio srautas: 15 m³/val, triukšmo lygis: 54 dB, apsaugos tipas (IP kodas): IP55, aušinimo tipas: oras, Įranga: Tipinė plokštelė prieinama, dokumentacija / vadovas, šaldymo sausintuvas, Scroll compressor with integrated compressed air treatment system Manufacturer: AIRPOL (Poland) - 2022 Model: SRKT 2 Cjdpfx Aaexyhdbjhepw The compressor delivers completely oil-free air, dried to a pressure dew point of +3 °C. Operating hours: 5 h Overpressure: 0.8 MPa Capacity: 14.4 m³/h Dimensions (L x W x H): 1430 x 660 x 1250 mm Compressed air connection: G½ Weight: 290 kg Tank capacity: 240 litres Ambient temperature range: +5 to +40 °C Cooling air requirement: 400 m³/h Compressed air temperature: approx. 15 °C above ambient Refrigerant: R134A – 0.35 kg Noise level: 54 dB(A) Power transmission: Belt drive Nominal motor power: 2.2 kW Motor energy efficiency class: IE3 Motor protection class: IP55 Power supply: 400/3/50 V/Ph/Hz Recommended power cable cross-section: 5 x 1.5 mm² Protection: A16 Dryer pressure dew point: +3 °C Compressed air purity class per ISO 8573.1: 1.4.1 Microprocessor controller: MS-286 Airpol Power Control

Būklė: geras (naudotas), Gamybos metai: 2017, Boge C10 LDR-350 sraigtinis kompresorius + džiovintuvas + imtuvas Gamintojas: Boge Modelis: C10 LDR 350 Metai: 2017 Maksimalus slėgis: 10 bar Imtuvo talpa: 350 litrų Cedpfx Aaeyfpk Ushjpw Oro srautas: 1,03 m3/min Variklio apsukos: 1.500 min Variklio galia: 7,5 kW Įrenginio matmenys (IxPxA): 1.960 x 720 x 1.350 mm Įrenginio svoris: 350 kg.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, COMPAIR L80-A10 sraigtinis kompresorius su oro sausintuvu (už papildomą mokestį). Reguliariai aptarnaujamas, labai geros būklės. Kompresorius: • Modelis: COMPAIR L80-A10 Cjdpfswu Dhzsx Aahopw • Pagaminimo metai: 2015 • Darbo valandos: 14 782 h • Siurbimo laikas: 13 216 h • Nominali įtampa: 400 V / 3 fazės / 50 Hz • Nominali galia: 75 kW • Sukimosi greitis: 3000 aps./min. • Darbinis slėgis: 10 bar • Aplinkos temperatūros diapazonas: 1°C iki 45°C • Išmatavimai (ilgis x plotis x aukštis): 2158 x 1223 x 1971 mm • Svoris: 2010 kg • Kaina: 7900 € Oro sausintuvas: • Modelis: COMPAIR F0460HS • Min./Maks. oro slėgis: 1/14 bar • Nominali įtampa: 400 V / 3 fazės / 50 Hz • Nominali galia: 6,26 kW • Nominalioji srovė: 13,55 A • Aplinkos temperatūros diapazonas: 5°C iki 50°C • Svoris: 525 kg • Kaina: 2500 € Kaina už abu įrenginius: 9900 € Žymos: sraigtinis kompresorius, oro sausintuvas, pramoninis kompresorius, kompresoriaus pardavimas, naudotas kompresorius, pramoninė įranga, efektyvus kompresorius, kompresorius dirbtuvėms

Būklė: naujas, Gamybos metai: 2026, bendras ilgis: 1 010 mm, bendras plotis: 680 mm, bendras aukštis: 1 605 mm, galia: 7,5 kW (10,20 AG), kuro tipas: elektrinis, slėgis (min.): 6 juosta, slėgis (maks.): 8 juosta, Įranga: CE žymėjimas, DUCOMP BRD 7,5kW - Sraigtinis kompresorius + oro talpa + džiovintuvas BRD serijos kompresoriuose kompresorius ir džiovintuvas sumontuoti ant oro talpos ir tarpusavyje sujungti. Csdpeygdk Esfx Aahopw Dėl vidinės talpos ir džiovintuvo įrenginys pristatomas paruoštas naudojimui.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, veikimo valandos: 20 900 h, Funkcionalumas: visiškai funkcionalus, bendras svoris: 4 500 kg, galia: 45 kW (61,18 AG), kuro bako talpa: 2 000 l, darbinis slėgis: 10 juosta, aušinimo tipas: oras, Complete compressor room Atlas Copco GA75VSD, year 2013, 46,100 operating hours – 75 kW – Max 10 BAR Dimensions: L225 x W110 x H195 cm Atlas Copco GA45+, year 2007, 21,000 operating hours – 45 kW – Max 10 BAR Dimensions: L205 x W100 x H180 cm Atlas Copco FD245, year 2013, refrigerant dryer Dimensions: W120 x D110 x H100 cm MaBe 2000L tank, year 2016, height 2.85 m Including oil-water separator The system is currently still in operation, operating hours may vary. The system is fully functional and has been continuously serviced. Maintenance kits and oil are included. Very good condition, see pictures Cedpfxsv Snn Ie Aahjpw Forklift available for loading Collection by appointment only in 75053 Gondelsheim Shipping via freight carrier possible, please inquire with your postal code

Būklė: beveik kaip naujas (naudotas), Los compresores GA (W) VSDs (Accionamiento de Velocidad Variable) son compresores de tornillo de una sola etapa, inyectados con aceite, impulsados por motor eléctrico y estacionarios. El sistema de refrigeración está equipado con un enfriador de aire y un enfriador de aceite. Los modelos GA VSD son compresores enfriados por aire; el aire de refrigeración es generado por un ventilador. Características principales: - Temperatura máxima de entrada de aire: 40ºC - Temperatura máxima de salida del agua de refrigeración: 50ºC - Temperatura aproximada del aire a la salida de la válvula: 30ºC Cpjdjwxwxzspfx Aahsw - Capacidad aproximada de aceite: 17,9 L

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Un compresor de aire industrial es una máquina utilizada para aumentar la presión y el caudal de aire comprimido con el fin de alimentar diversas herramientas, equipos y procesos industriales. Cpedpfx Aownxzisahow

Būklė: naudotas, Gamybos metai: 2022, Atlas Copco GA22VSDs sraigtinis kompresorius Cedeynkyvopfx Aahjpw

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, SCREW COMPRESSOR ATLAS COPCO GA110VSD 120 kW 2011 Cpodpfx Aotqdlpjahow Atlas Copco GA110VSD screw compressor equipped with an inverter and heat exchanger Technical specifications: Capacity: 18.72 m³/min Motor power: 120 kW Max pressure: 10 bar Operating hours: 17,483 h Year: 2011 The compressor is fully operational and ready for work. Warranty provided. Service support available.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, veikimo valandos: 53 400 h, Funkcionalumas: visiškai funkcionalus, galia: 22 kW (29,91 AG), tūrio srautas: 2,94 m³/val, slėgis (maks.): 11 juosta, aplinkos temperatūra (min.): 3 °C, aplinkos temperatūra (maks.): 45 °C, Serijos nr.: 1170 Priežiūrą atliko Kaeser Cpedpfx Aasym Axzohow

Būklė: naujas, Gamybos metai: 2026, Polish brand CORMAK screw compressor, THEOR H1515.8 COMPACT series, with integrated dryer, represents the latest solutions in pneumatics, combining the use of high-quality materials and components. Low operating costs, user-friendly operation, ergonomic and robust design, as well as high unit efficiency, guarantee effective and trouble-free operation. Key advantages: - Rigid, compact screw compressor construction from a European manufacturer - Automation based on modern, proven quality components for safe and efficient operation - Specially designed cooler ensuring optimal working conditions even under heavy load - Connection of the cooler to the module via high-quality hydraulic lines - Applied technology allows substantial energy savings - Special air outlet design for more effective operation Cedomrmy Aopfx Aahjpw - The compressor is equipped with a reliable and efficient pump - Unique triple-stage filtration system for efficient operation - Reliable and proven direct drive system between the motor and the screw mechanism (via a jaw coupling), which ensures: high effective performance; better vibration dampening - Low noise levels from the screw compressor thanks to a specially designed sound-insulated enclosure (soundproof panels) - Electronic MAM series control allows setting parameters such as: intervals between maintenance, power failure alarms, phase reversal, phase loss, overheating. Optional air receiver available for purchase. Technical specifications: Compressor Motor power: 15 kW Dimensions: 1550x750x1200 mm Weight: 500 kg Outlet thread: G 3/4" General specifications: Performance at 0-6 bar: 1700 L/min Performance at 6 bar: 1650 L/min Performance at 8 bar: 1500 L/min Performance at 10 bar: 1500 L/min Performance at 12 bar: 1350 L/min Performance at 14 bar: 1350 L/min The price quoted is NET, excluding transport costs. For more information, please contact us by phone or email. We invite you to browse our full offer on our website.

Būklė: naujas, Gamybos metai: 2026, The CORMAK THEOR H1520 COMPACT series rotary screw compressor by the Polish brand CORMAK, featuring an integrated dryer, offers state-of-the-art solutions in pneumatics combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Key advantages: - Strong, compact design from a European manufacturer - Automation based on modern and proven quality components for safe and efficient operation - Specially designed cooler provides optimal working conditions, even under heavy load - Cooler connected to the module via high-quality hydraulic hoses - Applied technology enables significant energy savings - Special air outlet construction for more efficient operation - Equipped with a high-performance, durable pump - Unique three-stage filtration system ensures efficient operation - The compressor employs a reliable, direct drive system with claw coupling between the motor and the screw mechanism, providing: high effective output and improved vibration reduction - Low noise emission due to specially designed soundproof casing (sound-insulating panels) - Electronic control system from the MAM series allows parameter settings such as: maintenance intervals, power failure alarms, phase reversal, phase loss, and overheating detection. Optional air receiver available. Technical specifications: Compressor Motor power: 15 kW Dimensions: 1550x750x1200 mm Weight: 500 kg Outlet thread: G 3/4" General parameters: Output at 0-6 bar: 1350 L/min Output at 6 bar: 1350 L/min Csdpfx Aomrmx Toahepw Output at 8 bar: 1250 L/min Output at 10 bar: 1250 L/min Output at 12 bar: 1150 L/min Output at 14 bar: 1150 L/min Output at 16 bar: 1050 L/min Output at 18 bar: 930 L/min Output at 20 bar: 930 L/min The price shown is NET (excluding VAT). The price does not include transportation costs. For more information, please contact us by phone or email. We invite you to visit our website to explore our full product range.

Būklė: naujas, Gamybos metai: 2026, NEW TO THE POLISH MARKET Screw Compressor 230 V CORMAK screw compressors, a Polish brand, guarantee quality and reliability. Our many years of experience in compressor sales have enabled us to create models with an excellent price-to-quality ratio. The presented model is ideal for small workshops or small production facilities. It is distinguished by its high output (380 l/min) relative to its compact size, allowing multiple devices to be operated at once. Its very low noise level (60 dB) means working in the same room is not disruptive. Thanks to high-quality components, this compressor is designed for continuous operation and can be used in industrial applications. CORMAK Screw Compressors: When you expect the highest quality and performance! Looking for solutions that go beyond market standards? CORMAK screw compressors are synonymous with innovation and reliability, crafted for even the most demanding applications. Innovative Design: Our compressors are built on advanced engineering and European manufacturing precision. The robust construction, enhanced with modern components, ensures long-lasting and trouble-free operation under all conditions. Optimized Efficiency: Thanks to inverter technology and smart algorithms, the LUFT 400 dynamically adjusts energy consumption to the current compressed air demand. This significantly reduces operational costs while maintaining maximum performance. Proven Drive System: The LUFT 400 compressor uses a direct drive system for maximum reliability, minimizing stress on the screw block and motor, ensuring efficient operation and extended lifespan. Quiet Operation and Comfort: Designed with attention to detail, our compressors feature exceptionally low noise levels. Effective sound attenuation and vibration reduction systems provide a comfortable work environment, boosting operator concentration and wellbeing. Intelligent Control: The intuitive MAM electronic control panel is the command center for your compressor. It enables precise parameter monitoring, maintenance scheduling, and rapid diagnostics, ensuring stability and safeguarding key components. Tailored to Your Needs: We understand that every application is unique. CORMAK compressors can be configured with additional air treatment systems for perfect adaptation to your industry's specific requirements. Dynamic Working Pressure: Automatic pressure regulation ensures the compressor delivers exactly the amount of compressed air needed at any given moment, maximizing energy efficiency and minimizing losses. Sustainable Solutions: We prioritize environmentally friendly solutions. The energy-saving technologies in our compressors not only lower your operating costs but also reduce environmental impact, and the heat recovery option ensures maximum energy utilization. Technical Specifications Motor Power: 3.0 kW / 4 HP Voltage: 230V/50Hz Output 0–6 bar: avg. 400 L/min Output @ 6 bar: 390 L/min Output @ 8 bar: 380 L/min Output @ 10 bar: 380 L/min Outlet connection diameter (G): 1/2" Dimensions: 800 x 520 x 740 mm Weight: 95 kg Manufacturer: Cormak Cpodpfxetz S H No Aahjw

Būklė: naujas, Gamybos metai: 2026, Set including THEOR 20 INVERTER Screw Compressor and N20S Refrigerant Air Dryer. The CORMAK THEOR series screw compressor, a Polish brand, represents state-of-the-art pneumatic solutions combined with high-quality materials and components. Low operating costs, ease of use, ergonomic and robust construction, as well as high performance ensure efficient and trouble-free operation. Additional dual filtration at the dryer! SET INCLUDES: - THEOR 20 Compressor with inverter (version equipped with inverter) - N20S Refrigerant Air Dryer The set does not include an air receiver! Option to purchase air receiver separately. Technical specifications THEOR 20 COMPACT: Compressor: Motor power: 15 kW Dryer: Motor power: 0.69 kW General parameters: Capacity at 6 bar: 1800 l/min Cpedemqlqdopfx Aahow Capacity at 8 bar: 1700 l/min Capacity at 10 bar: 1600 l/min Outlet: G3/4” The listed price is NET. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to visit our website for the full offer.

Būklė: naujas, Gamybos metai: 2026, LUFT 1500 COMPACT Screw Compressor with Refrigeration Air Dryer. The CORMAK LUFT series screw compressor, made by the Polish brand Cormak, represents the latest technological advancements in pneumatics, combined with high-quality materials and components. Featuring low operating costs, ease of use, ergonomic and robust design, as well as high performance, it guarantees efficient and trouble-free operation. Key features of screw modules in CORMAK compressors: - Modern technology and efficiency: Screw modules ensure excellent performance and outstanding operational efficiency. Their design focuses on maximum output with minimal energy consumption. Cpjdpfx Aasxnk Acohjw - Precision and control: Thanks to advanced technical solutions, screw modules offer precise control of the compressed air production process. This results in stable pressure and the optimal performance of the entire pneumatic system. - Durability and reliability: The screw modules used in CORMAK compressors are engineered for longevity. Their solid construction and use of high-quality materials ensure reliability even in demanding industrial environments, minimizing downtime and reducing the need for frequent repairs. Integrated Refrigeration Dryer – Top-Quality Air - Two-stage drying system: Provides effective moisture removal and protects the pneumatic installation. - Variable speed fan: Automatically adjusts cooling performance to operating conditions, allowing for energy savings. - Dual filtration system: Pre-filter with 3.0 µm accuracy for removing larger solid contaminants, and a fine filter with 0.1 µm accuracy that traps small oil particles (aerosols) and other impurities, ensuring the highest air purity. Technical specifications: Motor power: 11 kW Voltage: 400V/50Hz Capacity at 0–6 bar: 1620 L/min Capacity at 6 bar: 1580 L/min Capacity at 8 bar: 1350 L/min Capacity at 10 bar: 1230 L/min Discharge port diameter (G): 1" Dimensions: 1550 x 740 x 1150 mm Weight: 500 kg Manufacturer: Cormak

Būklė: naujas, Gamybos metai: 2026, Set includes: THEOR 20 screw compressor, N20S refrigerated air dryer, and a 500L compressed air tank. The CORMAK THEOR series screw compressor, manufactured in Poland, represents the latest solutions in pneumatics, combining high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance ensure efficient and trouble-free operation. Additional double filtration at the dryer! THE SET INCLUDES: - THEOR 20 COMPRESSOR Cedpfemqlm Tjx Aahjpw - N20S REFRIGERATED AIR DRYER - 500L AIR TANK (POLISH MANUFACTURE) Technical Specifications THEOR 20 COMPACT: Compressor Motor power: 15 kW Dryer Motor power: 0.69 kW General Parameters Output at 6 bar: 1800 l/min Output at 8 bar: 1700 l/min Output at 10 bar: 1600 l/min Outlet: G3/4" The listed price is NET. Price does not include transport costs. For more information, please contact us by phone or email. We invite you to view our full offer on our website.

Būklė: naujas, Gamybos metai: 2026, Set including LUFT 1000 VSD screw compressor and N10S refrigerated air dryer. The LUFT series screw compressor from the Polish brand CORMAK incorporates state-of-the-art solutions used in pneumatics, combined with high-quality materials and components. Low operating costs, ease of use, ergonomic and robust construction, and high device performance ensure efficient and trouble-free operation. Additional dual filtration on the dryer! Technical specifications LUFT 1000 COMPACT VSD Compressor Motor power: 7.5 kW Dryer Motor power: 0.29 kW General parameters Performance at 0–6 bar: 990 l/min Performance at 6 bar: 950 l/min Performance at 8 bar: 950 l/min Performance at 10 bar: 930 l/min Outlet: G 3/4" Cpodpfjkly Itex Aahjw Overall dimensions: 1320 x 650 x 945 mm Weight: 500 kg Manufacturer: Cormak

Būklė: naujas, Gamybos metai: 2026, The LUFT screw compressor represents the latest advancements in pneumatics, combined with the use of high-quality materials and components. Low operating costs, user-friendly operation, ergonomic and robust construction, and high efficiency guarantee reliable and trouble-free operation. CORMAK Screw Compressors: When you demand the highest quality and performance! Looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, engineered for the most demanding applications. • Innovative design: Our compressors are based on advanced engineering and European precision manufacturing. The solid construction, enhanced with modern components, ensures long-lasting and trouble-free operation under any conditions. • Quiet operation and comfort: Designed with attention to detail, our compressors feature exceptionally low noise levels. Efficient soundproofing and vibration reduction systems ensure a comfortable working environment, resulting in improved concentration and wellbeing for operators. • Smart control: The intuitive MAM series electronic control panel is your compressor’s command center. It enables precise parameter monitoring, maintenance planning, and quick diagnostics, ensuring stability and protecting key components. • Adaptability: We understand every application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing for perfect adaptation to your industry’s specific requirements. • Dynamic operating pressure: Automatic pressure regulation ensures the compressor delivers exactly the amount of compressed air required at any given moment, maximizing energy efficiency and minimizing losses. • Sustainability: We are committed to environmentally friendly solutions. The energy-saving technologies implemented in our compressors lower your operating costs while minimizing environmental impact, and the heat recovery option allows for maximum energy utilization. CORMAK: Technology that drives your success! Technical Specifications Motor power: 5.5 kW Voltage: 400V/50Hz Capacity 0-6 bar: 690 L/min Capacity at 6 bar: 650 L/min Capacity at 8 bar: 650 L/min Capacity at 10 bar:630 L/min Outlet port diameter (G): 1/2" Cpsdpfx Ajmqlguoahow Dimensions: 810 x 610 x 850 mm Weight: 120 kg Manufacturer: Cormak

Būklė: naujas, Gamybos metai: 2026, THEOR 50 Screw Compressor equipped with an inverter by the Polish brand CORMAK, THEOR series, features state-of-the-art solutions used in pneumatics, combined with high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, as well as high machine efficiency guarantee effective and trouble-free operation. The CORMAK THEOR series screw compressor from the Polish manufacturer offers the most advanced pneumatic solutions alongside top-grade materials and components. Low operating costs, user-friendly operation, ergonomic and solid construction, and high output ensure efficient and hassle-free performance. Our company has been active in the market for over a dozen years, boasting extensive experience in the distribution of piston and screw compressors. As a European manufacturer, we provide our customers with proven and recognized pneumatic solutions. Cpedpfx Aom Nb Tpoahjw Technical Specifications: • Motor Power: 37 kW • Voltage: 400V/50Hz • Air Flow: 5,600 l/min • Dimensions: 1500 x 1000 x 1330 mm • Weight: 830 kg Key Advantages: - INVERTER – The stepless speed control system is the most economical regulation method. Its main benefit is reduced energy consumption compared to traditional control systems and maintaining a stable preset pressure. - Sturdy, compact design of the screw compressor from a European manufacturer - Automation based on modern, high-quality components to ensure safe and efficient operation - Specially designed cooler ensures optimal working conditions even under high load - The cooler is connected to the module using high-quality hydraulic hoses - The applied technology allows for significant energy savings - Specially designed air outlet for more efficient operation - The compressor is fitted with a powerful and robust pump - Unique three-stage filtration system guarantees efficient operation - A reliable and proven solution: direct drive coupling (jaw-type clutch) between motor and screw unit, providing high effective efficiency, better vibration reduction, and eliminating the need for adjustments required in traditional belt drives - Low noise levels from the screw compressor due to a specially designed soundproofed enclosure (sound insulation panels) - Electronic MAM series control system allows configuration of parameters such as service intervals, power failure alarms, phase reversal, phase loss, overheating, master/slave operation mode, network connection for up to 16 devices, remote computer control, and more The listed price is NET (excluding VAT). Transport costs are not included. For more information, please contact us by phone or email. You are invited to visit our website for the full offer.

Būklė: naujas, Gamybos metai: 2026, THEOR 30 screw compressor equipped with an inverter from the Polish brand CORMAK, THEOR series, represents the most advanced solutions used in pneumatics combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, as well as high device efficiency, guarantee effective and trouble-free operation. Cpsdpfx Aajmt Dt Iehsw The screw compressor from the Polish brand CORMAK, THEOR series, offers state-of-the-art pneumatic solutions, utilizing top-grade materials and components. Low operating costs, user-friendly operation, ergonomic and durable construction, and high performance ensure efficient, uninterrupted operation. Our company has been active in the market for several years and we have extensive experience in the distribution of piston and screw compressors. As a European manufacturer, we provide our clients with proven and widely recognized pneumatic solutions. Technical specifications THEOR 30: - Motor power: 22 kW - Voltage: 400 V / 50 Hz - Theoretical air flow: 3200 l/min - Actual air flow: 2803-3090 l/min - Dimensions: 1380 x 850 x 1160 mm - Weight: 640 kg Key advantages: - INVERTER – The stepless speed control system is the most economical way of regulation. The main advantage is reduced energy consumption compared to compressors with conventional control systems, and maintaining a constant preset pressure. - Robust, compact screw compressor design from a European manufacturer - Automation based on modern and proven high-quality components for safe and efficient operation - Specially designed cooler ensures optimal working conditions even under heavy load - Cooler connection to the module via high-quality hydraulic hoses - The applied technology allows for significant energy savings - Special air outlet construction for more efficient operation - The compressor is equipped with a high-performance and robust pump - Unique three-stage filtration system for efficient operation - Reliable and proven direct drive system (via claw coupling) between the motor and screw mechanism, ensuring: high effective output, better vibration reduction, and eliminating the need for tension adjustments typical for conventional belt drives - Low noise level due to a specially designed soundproof housing (sound insulation panels) - Electronic control from the MAM series allows parameter settings including: service interval programming, power failure alarms, phase reversal, phase loss, overheating, Master/Slave mode, networking up to 16 devices in the pneumatic system, remote computer control, and more. The price quoted is NET. Price does not include shipping costs. For more information, please contact us by phone or email. Please visit our website to view our full offer.