Sraigtinis kompresorius

CORMAK LUFT 700 VSD+PM

Būklė: naujas, Gamybos metai: 2026, The LUFT 700 VSD+PM COMPACT oil-lubricated compressor with dryer stands out thanks to its traditional belt-driven transmission, which allows for much easier maintenance and lower service costs. Replacing the belt is simpler and less expensive than repairing a direct-drive system, and in case of wear, the belt can easily be replaced with a new one. This design also ensures a longer lifespan for the components. The lack of a rigid connection between the motor and the compressor’s working parts reduces wear and mechanical stress. The maximum pressure generated by this screw compressor is 10 bar. Full control over the machine’s operating parameters is provided by an intuitive MAM-series electronic control panel, giving you access to key device information, increasing both flexibility and process oversight. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V/50Hz Output at 0–6 bar: average 690 L/min Output at 6 bar: 690 L/min Output at 8 bar: 650 L/min Output at 10 bar: 650 L/min Outlet diameter (G): 1/2" Dimensions: 800 x 520 x 740 mm Weight: 95 kg Codpfx Ajybvkaokkerf

Būklė: naujas, Gamybos metai: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Set for Demanding Applications – ENERGY SAVER SET INCLUDES: - LUFT 700 VSD+PM COMPACT SCREW COMPRESSOR with integrated dryer - 500 L horizontal compressed air receiver tank Key features distinguishing these models: 1. Permanent Magnet Motor Technology (PM) Most compressors from the Energy Saver series utilize Permanent Magnet motors. Unlike standard induction motors: - They achieve efficiency levels compliant with IE4 or even IE5 standards - They maintain high efficiency even at very low RPMs (standard motors lose efficiency outside their nominal range) - They are smaller, lighter, and generate less heat 2. Advanced Variable Speed Drive (VSD) Control At the heart of the Energy Saver line is the frequency inverter (VSD). - Demand-based adjustment: The compressor does not operate in an "all or nothing" (load/unload) system. If your machine only requires 30% output, the compressor will reduce speed, consuming proportionately less energy. - Idle running eliminated: Classic compressors often run for several minutes after the tank is filled, consuming around 25–30% of nominal power without producing air. Energy Saver models virtually eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these devices start smoothly from 0 Hz. This means there are no sudden current peaks at startup, which: - Protects your facility’s electrical installation - Allows for more frequent starts and stops without risking winding overheating 4. Real Savings In practice, the Energy Saver series allows you to cut electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable line pressure (accuracy of up to 0.1 bar), essential for precision tools such as laser cutters. Extended service life: The absence of sudden pressure and temperature spikes prolongs the screw stage’s lifespan. Technical Specifications Cedoycg Ryopfx Akkjrf Motor power: 5.5 kW / 7.5 HP Voltage: 400V/50Hz Free air delivery 0-6 bar: approx. 690 L/min Free air delivery at 6 bar: 690 L/min Free air delivery at 8 bar: 650 L/min Free air delivery at 10 bar: 650 L/min Outlet connection diameter (G): 1/2" Dimensions: 1840 x 640 x 1470 mm Weight: 320 kg

Būklė: naujas, Gamybos metai: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Set for Demanding Applications - ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT Screw Compressor with integrated dryer. 270 L Horizontal Compressed Air Receiver Tank. Here are the key features that set these models apart: 1. Permanent Magnet Motor Technology (PM) Most compressors in the Energy Saver series utilize Permanent Magnet motors. Unlike standard induction motors: They offer efficiency levels compliant with IE4 or even IE5 standards. Maintain high performance even at very low rpm (standard motors lose efficiency outside their nominal range). Cjdpfx Ajycg I Sekkjrf They are smaller, lighter, and generate less heat. 2. Advanced Inverter Control (VSD) The heart of the Energy Saver line is the frequency inverter (VSD). Demand-based operation: The compressor does not operate in a simple on/off (load/unload) mode. If your machine only requires 30% capacity, the compressor reduces its speed accordingly, consuming proportionally less energy. Idle run elimination: Classic compressors often operate for several minutes after the tank is full, using approx. 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process entirely. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means there are no sudden current surges during startup, which: Protects your facility’s electrical installation. Allows for more frequent start/stop cycles without the risk of winding overheating. 4. Significant Energy Savings In practice, using the Energy Saver line allows electricity bills to be reduced by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable network pressure (accurate to 0.1 bar), which is crucial for precise devices such as laser cutters. Longer service life: The absence of sudden pressure and temperature fluctuations extends the lifespan of the screw block. Technical specifications Motor Power: 5.5 kW / 7.5 HP Voltage: 400V/50Hz Output 0-6 bar: avg. 690 L/min Output at 6 bar: 690 L/min Output at 8 bar: 650 L/min Output at 10 bar: 650 L/min Outlet port diameter (G): 1/2" Dimensions: 1495 x 520 x 1340 mm Weight: 250 kg

Būklė: naujas, Gamybos metai: 2026, Set including LUFT 700 VSD+PM screw compressor, a vertical compressed air receiver with fittings, 200 L capacity, and IZBERG N10S dryer. The CORMAK LUFT series screw compressor by the Polish manufacturer features state-of-the-art solutions in pneumatics combined with high-quality materials and components. Low operating costs, easy operation, ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Technical specifications of the compressor: Cedpfxoyguq Ae Akkorf Motor power: 5.5 kW / 7.5 HP Voltage: 400V/50Hz Capacity 0-6 bar: approx. 690 L/min Capacity at 6 bar: 690 L/min Capacity at 8 bar: 650 L/min Capacity at 10 bar: 650 L/min Discharge outlet diameter (G): 1/2" Dimensions: 800 x 520 x 740 mm Weight: 95 kg Technical specifications of the IZBERG N10S air dryer: Inlet/outlet pipe diameter (BSP): 1" Max. working pressure: 10 bar Max. inlet air temperature: ≤ 38°C Dew point: 3°C Capacity: 1500 l/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L x W x H): 380 x 600 x 625 mm Weight: 31 kg Type and quantity of refrigerant: R134a, 400 g Technical specifications of the 200 L pressure vessel: Weight (kg): 80 Fittings: 6 Fitting sizes: 1/2", 1", 2" Size: 166.5 x 45 cm Tank capacity (l): 200 Working pressure (bar): 11 Wall thickness (mm): 4 Diameter (mm): Ø 450 Height (mm): 1665 Included accessories: • 1/2" plug – 2 pcs. • 1/2" nipple – 1 pc. • 1/2" tee – 1 pc. • 1/2" to 1/4" reducer – 1 pc. • 1/4" pressure gauge – 1 pc. • 1" to 3/4" reducer – 2 pcs. • 1/2" ball valve – 1 pc. Please note: The set does not include a safety valve, which must be sourced separately.

Būklė: naujas, Gamybos metai: 2026, Set including LUFT 700 VSD+PM screw compressor and a vertical compressed air receiver with equipment, capacity 200 l. The Polish brand CORMAK LUFT series screw compressor features the latest solutions in pneumatics combined with high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, as well as high device efficiency, guarantee effective and trouble-free operation. Technical specifications of the compressor: Motor power: 5.5 kW / 7.5 HP Voltage: 400V/50Hz Performance at 0-6 bar: average 690 L/min Performance at 6 bar: 690 L/min Performance at 8 bar: 650 L/min Credpfxsyguirj Akkef Performance at 10 bar: 650 L/min Outlet connector diameter (G): 1/2" Dimensions: 800 x 520 x 740 mm Weight: 100 kg Technical specifications of the 200 L pressure vessel: Weight (kg): 80 Connections: 6 Connection sizes: 1/2", 1", 2" Dimensions: 166.5 x 45 cm Tank capacity (l): 200 Working pressure (bar): 11 Wall thickness (mm): 4 Diameter (mm): Ø 450 Height (mm): 1665 Note!!! The equipment does not include a safety valve, which must be purchased separately.