Sraigtas Mašinos pirkti naudotą (28 271)

Sąlyga: naujas, Bending length: 3100 mm Sheet thickness: 35 mm Upper roll diameter: 430 mm Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls mounted with bearings - Top roll cover hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements driven hydraulically Options: - Variable rotation speed: EUR 5,858 - Material feed table on request Lrjdpfx Aed Ab Stjaasw - Oil cooler standard - Central support: EUR 13,600 - Side supports: EUR 12,000 We have numerous references!

Sąlyga: naujas, Bending length: 2100 mm Sheet thickness: 30 mm Upper roller diameter: 360 mm Technical specifications: - Hardened and polished rollers - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rollers - Mobile control console - Rollers mounted with bearings - Upper roller cover hydraulically openable and closable via control panel Ledpfxsd Ab S Es Aaaerw - All rollers are driven by hydraulic motors and planetary gear units - Lateral movements are hydraulically driven Options: - Variable rotation speed: EUR 4,682 - Material feed table on request - Oil cooler: EUR 1,040 - Central support: EUR 13,600 - Side supports: EUR 9,060

Sąlyga: naujas, Sheet length: 2600 mm Sheet thickness: 20 mm Top roll diameter: 330 mm Technical data: - Hardened and polished rollers - Full body made from ST-52 steel - Conical bending device - Digital display for side rollers - Portable control panel - Rollers mounted with bearings - Top roller cover, hydraulically openable and lockable via control panel - All rollers powered by hydraulic motor and planetary gear system - Lateral movements are hydraulically driven Options: - Variable rotation speed EURO 4,682 Lrsdpfx Aed Ab S Njaaow - Material feed table upon request - Oil cooler EURO 1,040 - Central support EURO 13,600 - Side supports EURO 9,200 We have numerous references!

Sąlyga: naujas, Bending length: 2100 mm Sheet thickness: 25 mm Top roll diameter: 330 mm Technical data: - Hardened and polished rolls - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls mounted with bearings - Top roll cover, hydraulically openable and lockable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Side movements are hydraulically powered Options: - Variable rotation speed EURO 4,682 - Material feed table on request - Oil cooler EURO 1,040 - Central support EURO 13,600 Lodpfx Aod Ab S Reaasrw - Side supports EURO 8,400 We have many references!

Sąlyga: naujas, Bending length: 2600 mm Sheet thickness: 16 mm Top roll diameter: 300 mm Technical specifications: Lodpod Ab S Usfx Aaasrw - Hardened and polished rolls - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control console - Rolls mounted with bearings - Top roll cover, hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Side movements are hydraulically powered Options: - Variable rotation speed EURO 4,682 - Material feed table on request - Oil cooler EURO 1,040 - Central support EURO 13,600 - Side supports EURO 8,250 We have numerous references!

Sąlyga: naujas, Bending length: 2600 mm Sheet thickness: 10 mm Top roll diameter: 230 mm Technical specifications: - Hardened and polished rolls - Full body made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls are mounted with bearings - Top roll cover, hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements hydraulically powered Ljdpfx Aod Ab Thsaaerw Options: - Variable rotation speed EUR 4,682 - Material feed table on request - Oil cooler EUR 1,040 - Central support EUR 8,250 - Side supports EUR 6,600 We have numerous references!

Sąlyga: naujas, Bending length: 2050 mm Sheet thickness: 1.8 mm Upper roll diameter: 95 mm Sheet length: 2050 mm Technical specifications: - Cast iron frame Lrjdpfx Ajd Ab Tueaajw - Manual or optionally motorized bending - After bending, the upper roll can be swung aside to easily remove the material - Cone bending device - Rear and lower rolls adjustable up and down manually via handwheel - Portable control panel - Complies with CE regulations Options: - Motorized rear roll - Digital display for rear roll position - Body cover EURO 432,-- - Hardened rolls EURO 940,-- - Variable rotation speed We have a large number of references!

Sąlyga: naujas, Bending length: 1550 mm Sheet thickness: 2.5 mm Top roll diameter: 90 mm Technical data: - Cast iron frame - Manual or motorized (optional) bending - After bending, the top roller can be swung out to easily remove the material - Conical bending device - Rear roll and lower roll can be adjusted manually up and down using the handwheel - Mobile control panel Lrodjd Ab Twepfx Aaajw - In compliance with CE standards Options: - Motorized rear roll - Digital display for rear roll position - Body cover for EUR 362,-- - Hardened rollers for EUR 650,-- - Variable rotation speed We have numerous references!

Sąlyga: naujas, Sheet thickness: 3 Bending length: 1250 Upper roll diameter: 90 Sheet length: 1250 Technical data: - Cast iron body - Manual or motorized (optional) bending - After bending, the top roll can be opened to the side for easy removal of the material - Conical bending device - Movement of the rear roll and lower roll up and down manually via handwheel - Portable control panel - In compliance with CE standards Working length: 1250 mm Maximum sheet thickness: Pre-bending: 2.5 mm Bending: 3.0 mm Yield strength: 240 N/mm² Number of rolls: 3 Upper roll Ø: 90 mm Min. bending diameter: 130 mm Motor power: 1.1 kW Length (machine): 1950 mm Height: 1130 mm Width: 900 mm Weight: 500 kg Options: - Motorized rear roll EURO 825,-- - Digital display for rear roll position EURO 1,010,-- - Body covering EURO 314,-- - Hardened rolls EURO 550,-- Lrsdpfjd Ab Tzox Aaaow We have numerous references!

Sąlyga: naujas, Working width: 4010 mm Lrodperzx D Njfx Aaaow Bending beam rotation: approx. 140° Power supply: Three-phase 230 V / 400 V – 1.5 kW Max. bending angle: 180° Bending length: 4010 mm - HIGH COST-EFFICIENCY - FULLY HYDRAULIC - HIGH-QUALITY STEEL - CONSISTENT PRESSURE APPLICATION - MANUAL SHEAR - WITH PROFILING UNIT - ELECTRONIC ANGLE ADJUSTMENT The RULI long folding machine is the ideal machine for tinsmiths and both large and small sheet metal processing workshops. It is particularly distinguished by its simple and well-engineered design, making it low-maintenance. The RULI long folding machine operates fully hydraulically, with clamping and bending each controlled by a small lever. The swing-mounted, vertically closing upper beam ensures evenly distributed clamping pressure along the entire working length and prevents sheet displacement during clamping. Two angle scales allow for easy reading and setting of individual bending angles. The machine should be installed on a concrete floor or ceiling (minimum thickness: 12 cm).

Sąlyga: naujas, Column diameter: 260 mm Dimensions (LxWxH): 1725 x 745 x 2550 mm Weight approx.: 1800 kg Drilling capacity: Steel (S235JR) - 42 mm Drill table T-slot size: 19 mm Drill table T-slot spacing: 171 mm Clamping table length: 635 mm Clamping table height: 415 mm Connected load: 4 kW Max. spindle-to-table distance: 1270 mm Speed range: 37 - 1253 rpm Number of speed ranges: 12 - Versatile applications such as drilling, reaming, and tapping - Electrically braked motor - 24 V DC electrics and 2-channel safety circuit according to DIN EN 12717 - Heavy, solid, high-quality cast construction - Wide reach due to horizontally adjustable machine head - Clearly arranged control panel - Smooth-operating swivel and travel axes - Elaborate column swivel mechanism with optimized clamping for maximum stability and minimal clamping offset - Robust, torsion-resistant boom construction - Boom height adjustment via powerful motorized drive and lifting spindle - Drill head gearbox operates in an oil bath - Boom guideways hardened and precision-ground - Gear wheels made of case-hardened and precision-ground chrome-nickel steel for quiet and smooth running Lrsdpfx Aajwrukzjajw - Drill head and column can be clamped or released together or separately - Forward/reverse drive - Solid, precise and large drill table - Hardened and ground clamping table with parallel T-slots - Machine lamp - Overload protection - Thick-walled cast column ensures high smoothness and stability - LED lamp - Coolant system with coolant tank integrated in the machine base RD 4 / RD 5 - All axes are clamped manually

Sąlyga: naujas, Column diameter: 432 mm Dimensions (LxWxH): 3050 x 1185 x 3050 mm Approximate weight: 5600 kg Drilling capacity: Steel (S235JR) - 70 mm Clamping table length: 1000 mm Clamping table height: 500 mm Connected load: 11 kW Speed range: 44 - 1023 rpm Number of speed ranges: 29 - 1575 rpm Travel path - x: 1185 mm Travel path - y: 1000 mm - Versatile range of applications such as drilling, reaming, and tapping - Electrically braked motor - 24V DC electrics and two-channel safety circuit compliant with DIN EN 12717 - Heavy, massive, high-quality cast iron construction - Wide outreach thanks to horizontally adjustable machine head - Clearly arranged control panel - Smooth-running swivel and travel axes - Elaborately engineered column swivel mechanism with optimized clamping for maximum stability and minimal clamping deviation Ljdpfx Ajwruk Ujaaerw - Rigid, torsion-resistant design of the arm - Arm height adjustment via powerful motor drive and lifting spindle - Drill head gearbox operates in an oil bath - Arm guideways hardened and precision-ground - Gearbox gears made from hardened and precision-ground chromium-nickel steel for quiet and uniform operation - Drill head and column can be clamped or released together or separately - Forward and reverse operation - Solid, precise drill table, generously dimensioned - Hardened and ground clamping table with parallel T-slots - Machine lamp - Overload protection - Thick-walled cast column for maximum stability and smooth running - LED light - Coolant system with coolant tank integrated in the machine base RD 6 / RD 7 - Column is hydraulically clamped

Sąlyga: naujas, Sheet length: 3100 mm Sheet thickness: 10.0 mm Pre-bending capacity: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 9.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 10.0 mm » at 3x top roller diameter Pre-bending: 8.0 mm » at 1.5x top roller diameter Top roller diameter: 270 mm Lower roller diameter: 250 mm Side roller diameter: 220 mm Max. opening: 50 mm Working height: 825 mm • Fully hydraulic drive of top and bottom rollers via planetary gearbox • Digital display for side roller positions • Hydraulic drop-end bearing • Cone bending device • Hardened rollers • Hydraulic side roller adjustment, synchronized via PLC • Hydraulic lower roller adjustment via torsion bar • Pressure-adjustable lower roller • Electric and hydraulic overload protection • Mobile control panel • Operating manual in GERMAN and ENGLISH Lrjdpfx Ajd Ab H Eoaaew • Machine and equipment in compliance with CE regulations Important points for cone rolling: • Maximum sheet thickness is 50% of the nominal capacity • Cone length may be max. 30% or must be more than 60% of the roller length • Hardened rollers are recommended

Sąlyga: naujas, Bending length: 3100 mm Sheet thickness: 5 mm Top roller diameter: 190 mm Technical specifications: - Rear roller motor-driven - Conical bending device - Hardened and polished rollers - Entire frame made of St 52 steel - Asymmetric design for perfect bending results Lredsd Ab Nijpfx Aaasw - Top and bottom rollers powered by brake electric motors and planetary gears in the gearbox - Mobile control panel - In compliance with CE standards Options: - Bottom roller driven by electric motor: EUR 1,925 - Digital display for rear roller position: EUR 1,010 - Extended rollers: EUR 966 - Profile rollers: EUR 1,190 We have numerous references!

Sąlyga: naujas, Bending length: 2600 mm Sheet thickness: 4 mm Top roll diameter: 140 mm Sheet length: 2,600 mm Technical specifications: - Rear roll is motor-driven - Cone bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls powered by brake motors and planetary gearboxes inside the gearbox - Portable control panel - Compliant with CE standards Options: - Bottom roll driven by electric motor EURO 1,513 - Digital display for rear roll position EURO 1,010 Lredsd Ab Nrspfx Aaaew - Extended rolls EURO 966 - Profile rolls EURO 1,190 We have numerous references!

Sąlyga: naujas, Bending length: 1600 mm Sheet thickness: 6 mm Upper roller diameter: 140 mm Technical specifications: - Rear roller driven by motor - Conical bending device - Hardened and polished rollers - Entire body made of ST 52 steel Lrjdpfxsd Ab Nto Aaajw - Asymmetric design for perfect bending - Upper and lower rollers powered by brake electric motors and planetary gearbox integrated in the transmission - Portable control panel - In compliance with CE standards Options: - Lower roller driven by electric motor EURO 1,512,-- - Digital display for rear roller position EURO 1,010,-- - Extended rollers EURO 966,-- - Profile rollers EURO 1,190,-- We have numerous references!

Sąlyga: naujas, Bending length: 1050 mm Sheet thickness: 5 mm Top roller diameter: 110 mm Technical specifications: - Rear roller motor-driven - Cone bending device - Hardened and polished rollers - Entire frame made of St 52 steel - Main motor with brake system - Top and bottom rollers driven by electric motor, gearbox, and gear system - Portable control panel - Cast iron body - Manual adjustment of rear and lower rollers - Compliant with CE standards Options: - Top roller driven by electric motor EURO 1,166 - Digital display for rear roller position EURO 1,010 Ledped Ab N Hefx Aaajrw - Hardened rollers EURO 725 - Special voltage EURO 480 - Sheet feed table - Bottom roller driven by electric motor We have a large number of references!

Sąlyga: naujas, Sheet thickness: 30 mm Bending length: 4100 mm Top roll diameter: 510 mm Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls are driven by hydraulics and gearbox - The vertical movement of the lower roll is hydraulically powered - Movable control panel - In compliance with CE standards Options: Lrsdpfxod Ab N To Aaajw - Variable rotation speed: EUR 5,858 - Material feed table: EUR 5,100 - Oil cooler: standard - Central support: EUR 18,750 - Side supports: EUR 16,800 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Sąlyga: naujas, Sheet thickness: 25 mm Bending length: 4100 mm Top roll diameter: 460 mm Technical data: - Hardened and polished rolls - Complete frame made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulic motors and gearbox - Vertical movements of the lower roll are hydraulically powered - Mobile control panel - In accordance with CE standards Lodjd Ab Rdspfx Aaasrw Options: - Variable rotation speed EUR 5,858.00 - Material feed table EUR 5,100.00 - Oil cooler STD. - Central support EUR 18,750.00 - Side supports EUR 15,400.00 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Exchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Sąlyga: naujas, Sheet thickness: 50 | Bending length: 2100 | Top roll diameter: 460 Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulics and gearbox - Vertical movement of the lower roll is hydraulically driven - Movable control panel - In compliance with CE standards Options: - Variable rotation speed EUR 5,858 - Material feed table EUR 5,100 Ledsd Ab Riepfx Aaasrw - Oil cooler STD - Central support EUR 18,750 - Side supports EUR 9,700 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Sąlyga: naujas, Sheet thickness: 30 mm Bending length: 2600 mm Top roll diameter: 390 mm Lrjdpfjd Ab Rrsx Aaaow Technical Data: - Hardened and polished rolls - Complete body made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulic system and gearbox - Vertical movement of the lower roll is hydraulically powered - Mobile control panel - In compliance with CE standards Options: - Variable rotation speed: EUR 4,681 - Material feed table: EUR 3,400 - Oil cooler: EUR 1,040 - Central support: EUR 13,600 - Side supports: EUR 9,450 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for custom requirements) We have numerous references!

Sąlyga: naujas, Sheet thickness: 25 mm Bending length: 2600 mm Top roller diameter: 360 mm Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - 4 rolls arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roller positions - Hydraulic feed adjustment - Top and bottom rolls driven by hydraulic system and gearbox - Vertical movements of the lower roll are hydraulically driven - Movable control panel - In compliance with CE standards Options: - Variable rotation speed EUR 4,681 - Material feed table EUR 3,400 - Oil cooler EUR 1,040 - Central support EUR 13,600 - Side supports EUR 9,200 - Automatic material extractor Lrodpfx Aed Ab Rwsaasw - PLC control system - CNC control system - Automatic material loading system - Interchangeable top roll - Adjustable support system for lower roll (for specific customer requirements) We have numerous references!

Sąlyga: naujas, Sheet thickness: 25mm Bending length: 2100mm Top roll diameter: 330mm Technical data: - Hardened and polished rolls - Entire frame made from ST-52 steel - 4 rolls symmetrically arranged - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll position - Hydraulic feed - Top and bottom rolls driven by hydraulic system and gearbox - Vertical movements of the lower roll are hydraulically powered - Movable control panel - In compliance with CE standards Options: - Variable rotation speed: EUR 4,681 - Material feed table: EUR 3,400 - Oil cooler: EUR 1,040 - Central support: EUR 13,600 - Side supports: EUR 8,400 - Automatic material extractor - PLC control system Lrodod Ab R Depfx Aaaow - CNC control system - Automatic material loading system - Exchangeable top roll - Adjustable lower roll support system (for special customer requirements)

Sąlyga: naujas, Sheet thickness: 16 Bending length: 2600 mm Lredpfjd Ab R Ijx Aaasw Top roll diameter: 300 mm Technical Specifications: - Hardened and polished rolls - Complete body made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically operated top opening for easy material removal - Digital display for lower and side roll position - Hydraulic adjustment - Top and bottom rolls powered by hydraulics and gearbox - Vertical movements of the lower roll are hydraulically driven - Mobile control panel - In compliance with CE standards Options: - Variable rotation speed EURO 4,681 - Material feed table EURO 3,400 - Oil cooler EURO 1,040 - Central support EURO 13,600 - Side supports EURO 8,250 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have many references!

Sąlyga: naujas, Sheet thickness: 20 Bending length: 2100 Top roll diameter: 300 Technical data: - Hardened and polished rolls - Complete frame made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic feed-in - Top and bottom rolls driven by hydraulic system and gearbox - Vertical movements of the lower roll are hydraulically driven - Mobile control console - Compliant with CE standards Optional: - Variable rotation speed - Sheet feeding table - Oil cooler - Central support - Side supports - Automatic material ejector - PLC control - CNC control - Automatic material loading system Lrjdpfed Ab R Nsx Aaasw - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!