Spiralės Frezavimo Įrenginys pirkti naudotą (10 380)

Sąlyga: geras (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, Control: SIEMENS 840D Solution Line (Electrical overhaul in 2017) x-axis: 7,000 mm y-axis: 2,100 mm z-axis: 1,500 mm z-travel (vertical spindle): 1,200 mm Credpfxsxhhb Nj Admoh Universal milling head in orthogonal design Power-driven swivel range of milling head holder: 340 degrees Swivel range of milling head: 180 degrees Tool holder: SK 50 Spindle speeds: 22 - 2240 rpm Feed rate X, Y, and Z axis: 2 - 12,000 mm/min Rapid traverse speed X, Y, and Z axis: 12,000 mm/min Drive power 100% DC / 60% DC: 31.5 / 39 kW Clamping table Dimensions (LxWxH): 6,000 x 1,500 x 300 mm T-slots: 6 pc. 28H7 (DIN650) T-slot spacing: 250 mm Max load: 10 t/m² Equipped with: NC rotary table PEISELER AWU with counter bearing (faceplate 650 mm) Automatic universal milling head (orthogonal) (completely overhauled in 2017, little use since) SIEMENS electronic handwheel 3 support tables Various prism supports MAYFRAN hinged belt conveyor Coolant system with paper band filter Operator platform movable in X-direction, safety enclosure with inspection window The machine is in exceptionally good condition and can be inspected under power. In 2017, a new SIEMENS 840D Solution Line control was installed, and all drive motors as well as the control cabinet were renewed.

Sąlyga: reikia remonto (naudotas), Gamybos metai: 1996, Funkcionalumas: neveikiantis, mašinos/transporto priemonės numeris: 340547, X ašies eiga: 400 mm, Y ašies eiga: 320 mm, Z ašies eigos atstumas: 400 mm, plunksnos brūkšnys: 60 mm, bendras svoris: 1 300 kg, stalo ilgis: 650 mm, ruošinio svoris (maks.): 250 kg, stalo plotis: 350 mm, galia: 10 kW (13,60 AG), valdiklio modelis: TNC 124, Įranga: sūkių greitis be galo kintamas, The listed milling machine is being sold as defective. Displayed error: Severe positioning error on the Z-axis. Otherwise, the machine is in good condition and was used exclusively for training purposes. The following parts have been newly installed by the service: - Supply module - Z-axis assembly with brake - Z-axis linear measurement system - Scrapers on all axes Codpfx Adjwlqtfsmorh - Filter mats - Timing belts - X-axis linear measurement system - Signal converter for measurement system Total costs for maintenance and repair amounted to €15,000. The error is still present. Due to the age of the machine and modernization of the workshop, repairs have been discontinued. The machine can be inspected by arrangement. All information is provided without any warranty.

Sąlyga: labai geros būklės (naudotas), Panhans gamintojo dantų pjovimo vežimėlis su spaustuvu, skirtas naudoti ant stalinių frezų. Gamintojas – Panhans, bet buvo sumontuotas ant Martin Schenk veleninės frezos. Csdpfxexb Sy Ae Admorh Pagrindo plokštės ilgis apie 1000 mm Stūmimo eiga apie 710 mm Ekscentrinis spaustuvas ruošiniui fiksuoti Kampinė atrama reguliuojama Įrenginį galima apžiūrėti ir išmėginti mūsų teritorijoje susitarus dėl laiko. Siūlome tik tas mašinas, kurios yra paruoštos demonstracijai mūsų sandėlyje, žr. „kiti šio pardavėjo pasiūlymai“.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1999, Universalioji įrankinė frezavimo staklė TOS FNGJ 32 Heidenhain 3 ašių skaitmeninis indikatorius Pagaminimo metai: 1999 Darbo eiga: X 600, Y 400, Z 400 mm Sūkių diapazonas: 40 – 2000 aps./min Su šia komplektacija: - Standus kampinis stalas, prispaudimo paviršius 800 x 400 mm Credpfx Ajxc It Iedmsh - Vertikali frezavimo galva - Ištraukiamas gręžimo pinolas - Įvairūs SK 40 įrankių laikikliai - Apsauginis įtaisas - Drožlių padėklas - Staklių lempa - Automatinė centralizuoto tepimo pompa X, Y, Z ašims - Aušinimo sistema - 4 vnt. staklių pėdų

Sąlyga: naujas, Drive power: 0.75 kW Angle: 45° Speed: 10,000 rpm Milling height: 4.0 mm Motor: 400 Volt Dimensions (L x W x H): 560 x 300 x 450 mm Weight: 44.0 kg Description: - Advantage of the adjustable guide rail: the workpiece does not need to be moved, preventing scratches - Ideally suited for deburring and chamfering (visible edges) of various materials, such as steel, aluminium, non-ferrous metals, plastics, etc. - Optimal for creating visible edges with outstanding surface quality - High dead weight for vibration-free operation Scope of delivery: - Adjustable guide rail, 500 mm - Milling head - Carbide indexable inserts - Operating tools Codpfx Adjxab H Njmjrh

Gamybos metai: 1989, Sąlyga: beveik kaip naujas (naudotas), Spindle diameter: 30 mm Motor power: 5.5 kW Credpfx Aehi Tv Hsdmoh 5 spindle speeds: 3000/4500/6000/8000/10000 rpm Year: 1989 Option to purchase without feed unit

Sąlyga: naudotas, Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 106546-11, bendras aukštis: 3 550 mm, bendras ilgis: 7 185 mm, bendras plotis: 4 720 mm, bendras svoris: 8 000 kg, The drilling method used by the deep hole drilling machine is single-lip (gun drilling). Drilling Unit Information: - Number of spindles: 1 - Spindle speed infinitely variable: 500 - 8,000 rpm - Spindle drive power: 11 kW at 60% duty cycle - Max. drilling depth: 1,000 mm (in one stroke without retraction) - Drilling diameter: 3 - 35 mm (based on ST 60) - Drilling diameter / indexable inserts: 40 mm - Max. thread tapping: M27 - Milling material removal rate: 250 ccm/min Travel: - X-axis travel: 1,050 mm - Y-axis travel: 600 mm - Z-axis travel: 800 mm - W-axis travel: 1,250 mm (with 2 steady rests) Travel Speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 1,200 liters - 1x scraper belt chip conveyor - 1x screw conveyor system - 1x hydraulic and pneumatic power unit / equipment - 1x central lubrication system - 1x immersion pump: Pump output: 200 l/min - 1x low pressure pump: Pump output: 100 l/min Pump drive: 2.2 kW - 1x compact band filter: Filtration capacity: 175 l/min for machining steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1x air cooler (heat exchanger) 22.5 kW - 1x oil mist extraction unit, Suction capacity: 1,250 m³/h Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with tool holder SK 40 Tool Changer Magazine includes: - Tool magazine with intermediate gripper - Tool holder SK 40 - Max. permissible tool diameter: 80 mm - Max. permissible tool length: 250 mm - Number of tool stations: 80 - 2x swiveling tool steady rests for guiding and supporting long drilling tools, with automatic return to home position. Clamping Table with B-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - B-axis: 360° - Positioning accuracy B-axis: +/- 30 arcseconds - Table travel: 800 mm Crsdpfxsxdm Awe Admjh - Payload (central): 1,500 daN Electrical Equipment Information: - 1x CNC controller, Heidenhain iTNC 530 - 1x drilling process monitoring system - 1x RENISHAW probe Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 26 kW

Sąlyga: naujas, Gamybos metai: 2025, Robust cast iron and steel construction Large-dimension cast iron milling unit, tiltable up to -45° to the rear Csdpfx Aoiidnfedmjrh Milling speeds indicated by LEDs Quick, easy speed change via eccentric clamping Forward/reverse rotation Height and tilt indicated to an accuracy of 0.1 mm Heavy-duty professional milling fence: with rack-and-pinion fine adjustment, digital readout, aluminum fence jaws, 3-way positionable for rapid repeated settings TECHNICAL DATA Extraction connection Extraction port diameter 2 x 120 mm Worktable Worktable length 2500 mm Worktable width 655 mm Electrical Data Connection voltage 400 V Mains frequency 50 Hz Drive motor power 5.0 kW Milling spindle Spindle tilt 0 – -45° Usable spindle length 125 mm Spindle speeds 3500/6000/8000/10000 rpm Spindle shaft diameter 30 mm Max. milling tool diameter Max. tool diameter 240 mm Max. lowerable tool diameter 230 mm Max. tool diameter for profile milling 210 – 240 mm Max. tool diameter for tenoning 320 mm SCOPE OF DELIVERY Aluminum milling fence jaws Curved profile milling safety guard Motorized height- and angle-adjustable milling spindle Digital readout of set values Speed display on the machine front via LED Table extension left and right Location: Ex stock 54634 Bitburg - Available immediately -

Sąlyga: naudotas, Multi-speed machine with flexible shaft BIAX Type MB 4-2 Machine No. 9/50/55 Year of manufacture: approx. 1970 Length of flexible shaft: 2 meters Speed: 900 - 9000 rpm, infinitely variable Motor speed: 3000 rpm Motor power: 1.2 kW = 1.5 HP Power supply: 380 Volt, 50 Hz - Straight hand grinder with 6 mm collet - Swiveling and rotatable base - Transport trolley with 2 drawers Overall dimensions: 850 x 550 x 1100 mm Weight: approx. 80 kg Cedpfxjfim Tij Admsrh Good condition Universal use for milling, grinding, and polishing tasks

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1996, Universal Tool Milling Machine KUNZMANN WF 4/3 With 3 axes Heidenhain digital readout Year of manufacture: 1996 Travel distances: X 400 Y 320 Z 400 mm Speed range: 40 – 2550 rpm Including the following accessories: Credpoq Ulucefx Admoh Rigid angle table, 800 mm x 360 mm clamping surface Mechanical handwheels for X, Y, and Z axes Hydraulic tool clamping Automatic central lubrication pump for X, Y, and Z axes Machine lamp 4 machine feet Coolant unit Operating manual THE MACHINE WAS USED EXCLUSIVELY FOR APPRENTICE TRAINING!! THE MACHINE IS IN GOOD CONDITION!!

Gamybos metai: 2000, Sąlyga: naudotas, Pallets, 3 pieces Dimensions (length/width/height): see images (mm) Machine weight approx. . t Cedpjupmwlefx Admjrh

Sąlyga: naudotas, Table size 900 x 460 mm X/Y/Z travel – 600/400/420 mm Spindle speed 20–4000 rpm Spindle taper ISO 40 Hydraulic tool clamping Tool changer with 32 stations Drilling stroke in vertical head 75 mm Swiveling vertical head +/- 90° Control: Heidenhain TNC 407 Equipped with: Crjdpfx Adol Dvx Esmjh Machine vice 19 tool holders Coolant system

Sąlyga: naudotas, Gamybos metai: 1965, x-travel 1000 mm y-travel 600 mm Total power requirement 2.5 kW Cedpfx Ajwqrw Nodmerh Description to follow!

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, minimax ti 55es LL – Spindle Moulder Image shows T 55 i elite s standard version Cededqzh Repfx Admerh Professional workshop machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting. Robust steel and cast iron construction. Large-dimension grey cast iron milling unit, tiltable up to -45° to the rear. Spindle speeds displayed via LEDs. Quick and easy speed change via eccentric clamping. Reversible direction of rotation (right/left). Height and tilt display accurate to 1/10 mm. Heavy-duty industrial fence: with rack-and-pinion fine adjustment, digital display, aluminium fence jaws, 3-position repeat setting for quick adjustment. Scope of delivery: Aluminium fence jaws Curved milling protection hood Table extensions left and right Model: minimax ti 55es LL Article No.: 5502252 Technical data: Worktable dimensions: 2500 x 655 mm Sliding table dimensions: — Usable spindle length: 125 mm Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tenoning cutter diameter: 320 mm Spindle tilting range: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400V / 50 Hz / S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm

Sąlyga: naudotas, Gamybos metai: 2005, 1 pre-owned, very well-maintained crankshaft milling attachment for installation, e.g. on a lathe, for milling crankshafts or for other milling operations Manufacturer: SEMA, Origin: Austria Model: SE 100 Year of manufacture: 2005 Technical data: Spindle taper: ISO 50, runout/test arbor L = 300 mm = 0.01 mm Speed range, stepless: currently set to 2,000 rpm Spindle is rated for up to 3,000 rpm Drive power: currently 15 kW The milling spindle is designed for up to 25 kW Bearing diameter: 110 mm The two bolted adapter plates beneath the milling spindle are each fastened. These plates can be used for your lathe, reworked, or may need to be custom manufactured. Bolting surface of the milling spindle: L x W: 490 x 250 mm Accessories / Special features: Milling spindle: • The milling spindle is mounted onto the cross slide of your lathe • Infinitely variable speed adjustment, frequency inverter by LENZE, rated up to 30 kW • Forward / reverse • Lifetime-lubricated spindle bearings • Robust construction with hardened and ground spindle • High precision • Double-supported spindle with 5 spindle bearings • Tool clamping via a drawbar • Mobile trolley with control panel • Emergency stop • Lockable main switch Driver gearbox for main spindle: • A long drive shaft is mounted into the spindle bore and connected to the gearbox • Infinitely variable speed adjustment, frequency inverter by LENZE • Forward / reverse • Jog mode fast/slow The images show this unit installed on a SARO SPA 10 x 3000 universal lathe for crankshaft milling. This lathe is not included in the scope of delivery! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel Cedpeddziyefx Admjrh

Gamybos metai: 2010, Sąlyga: beveik kaip naujas (naudotas), I am selling a radius copy milling unit suitable for edge processing on CNC machining centers with edge banding from brands such as HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI, HOLZ-HER, IMA, FELDER, MASTERWOOD, BUSELLATO, etc. Credpfx Adshw Db Iemsh Rotation speed: 12,000 rpm Radius: R2mm HSK63 interface Available immediately.

Sąlyga: naudotas, Aggregate construction kit, format processing unit, cutting unit, milling unit, profiling milling unit, jointing milling unit, cross-cutting unit, double-end profiler, edge processing machine, scoring motor, cutting motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit from edge banding machine BRANDT KM 36 / KM 35 -Motor: 2x Homag type LF-55L 0.55 kW / 12,000 rpm Crsdpfsgy Dbhox Admjh -Voltage: 220V / 200 Hz -Quantity: 2 milling units available -Price: per unit -Dimensions: 500/350/H570 mm -Weight: 55 kg

Sąlyga: naudotas, x-travel 600 mm y-travel 400 mm z-travel 500 mm Total power requirement 6 kW Description to follow! Codpfewqrxmsx Admjrh

Sąlyga: naudotas, Gamybos metai: 2006, SEMA SE 100 Milling Spindle Unit, e.g. for the Production of Crankshafts Spindle Mount: Flange Speed with this gearbox: 97 rpm Spindle rated up to 3,000 rpm Drive power, currently: 22 kW Milling spindle rated up to 25 kW Bearing diameter: 110 mm Disc milling cutter SANDVIK Ø 700 x 25 mm Cutting depth of disc milling cutter: 235 mm Accessories / Special Features: - Disc milling cutter SANDVIK Ø 700 x 25 mm - Spindle bearings with lifetime lubrication - Robust design with hardened and ground spindle - High precision - Spindle supported by 5 bearings (double-supported) Cjdjddzi Aspfx Admsrh - Tool clamping via flange Original new price: approx. €34,500.00 net Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Sąlyga: naudotas, Aggregate modular system; profiling processing unit; cutting unit; milling unit; contour milling unit; joining milling unit; cross-cutting unit; double-end profiler; edge processing machine; scoring motor; cutting motor; milling motor for edge processing machine - Manufacturer: Katt, milling unit with 3 cutters - Motor: Type N132M, 12 kW / 2960 rpm - Protection class: IP 44 - Shaft: double-sided Ø 40 x 235 mm - Cutter width: 20/10/18 mm - Dimensions: 840/320/H380 mm - Weight: 99 kg Cedpfx Adsgy Dbpsmsrh

Sąlyga: naudotas, Aggregate construction kit, format processing aggregate, cutting aggregate, milling aggregate, contour milling aggregate, jointing milling aggregate, cross-cut aggregate, double-end profiler, edge processing machine, scoring motor, cutting motor, milling motor for edge processing machine -for sawing: edges on the front and rear edges of workpieces Cedpfednca Njx Admorh -1x: Perske motor -Type: KN60.09/2 -Power: 1.5 kW -Voltage: 220/380 Volt -Frequency: 50 Hz -Speed: 2810 rpm -Dimensions: 900/575/H450 mm -Weight: 112 kg

Sąlyga: naudotas, double-end profiler, edge processing machine, flush router, edge router, spindle motor, milling motor - 2x motor: 0.4 kW, 20 mm shaft, 11,300 rpm at 200 Hz - Motor: mounted on guides - Motors: swiveling - Cutter: with indexable inserts - 3x consoles: each equipped with 2 motors - Price: per unit - Weight: 60 kg/unit Csdpfxsb A Im Ro Admsrh

Gamybos metai: 1994, Sąlyga: naudotas, Modular aggregate system, contour processing unit, cutting unit, milling unit, form milling unit, jointing milling unit, cross-cut unit, double-end tenoner, edge processing machine, scoring motor, cutting motor, milling motor for edge processing machine -With HOMAG milling units, you can rebate, groove, and profile -with sensing from 2 sides each -Milling unit: tiltable -2x Perske motors Codpfx Ajb Uhqaodmjrh -Power: 0.3 kW -Voltage: 165 Volts -Frequency: 300 Hz -Speed: 18,000 rpm -Other motors with different power ratings available from stock at additional cost -Weight: 64 kg

Sąlyga: naudotas, modular aggregate system, format processing unit, machining unit, milling unit, profile milling unit, joining milling unit, cross-cutting unit, double-end profiler, edge processing machine, scribing motor, machining motor, milling motor for edge processing machine -HOMAG milling units allow you to rabbet, groove, and profile -with sensing on 2 sides each -Milling unit: swiveling -2x Perske motors -Power: 0.6 kW -Voltage: 165 volts -Frequency: 300 Hz Crodpfx Adjb Uhrgomsh -Speed: 18,000 rpm -Other motors with different power ratings available from stock at extra cost -Dimensions: 480/350/H570 mm -Weight: 55 kg

Sąlyga: naudotas, Aggregate modular system, format processing unit, machining unit, milling unit, contour milling unit, jointing milling unit, cross-cut unit, double-end profiler, edge processing machine, scoring motor, machining motor, milling motor for edge processing machine - The dual-motor HOMAG contour milling units ensure precise corner rounding even during veneer processing - For rounding the edges on the front and rear of the workpiece, as well as the lower edge - 2 sets of corner copying units each - 2 Perske motors - Power: 0.3 kW - Voltage: 165 Volt - Frequency: 300 Hz Codpfx Adeb Uhr Ajmorh - Speed: 18,000 rpm - Dimensions: mm - Weight: 65 kg