Skylė Perforavimo Mašina pirkti naudotą (13 606)

Sąlyga: naudotas, Types of flutes: F/W/E/B/C, double flute types: FF/FE/FB/EB, greyboard weight: 600g-1200g/m², board thickness range: 0.15mm-6mm, grammage capacity: 180g-1200g/m², min. sheet format: 590mm/700mm, max. sheet format: 1015mm/1410mm, knife size X/Y: 995mm/1390mm, distance from sheet start to first knife: 15mm. Documentation available. An on-site inspection is possible. Gsdpfx Ajwltzxjczott

Sąlyga: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Mechanical roller feed BBV202/120 for mounting on BSTA25 or BSTA50 Left-hand installation Driven via the main shaft/cardanic shaft of the press – cardan shaft/mounting plate not included in delivery Mechanical feed length adjustment via spindle Drive shaft protection with tube system Gjdpfx Aor Hmpcsczett Including encoder mount

Sąlyga: naudotas, IMV automatinė štampavimo mašina Tipas: DM 125 Pagaminimo metai: 2016 Presavimo jėga: 1.250 t Eigos reguliavimas: 250 - 500 mm Stūmoklio reguliavimas: 300 mm Godpfxjxnxlxj Aczjtt Eigos per minutę: 5-35 Montavimo aukštis: 1.150 mm Stalo plotas: 4.500 x 1.800 mm Stūmoklio plotas: 4.500 x 2.000 mm

Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: PA-399, Print format: A3 Godpeh Eh U Rjfx Aczstt Paper size: approx. 31x45 cm

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2026, spaudimo jėga: 25 t, Pagal užsakymą gaminamas įrenginys Greitaeigis štampavimo presas B250-740 Gtjdpfxew U A Ewe Aczjt Stalo ilgis 740 mm, taip pat galima 850 mm, Reguliuojamas eigos ilgis nuo 13 iki 38 mm, Vietoje Bruderer BBV 190/85 ritininio padavimo galima sumontuoti servo padavimo įrenginį. Dėl išsamių pasiūlymų susisiekite su mumis.

Sąlyga: geras (naudotas), Gamybos metai: 1972, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 25 t, reikalingas aukštis: 2 800 mm, vietos reikalavimas ilgis: 1 600 mm, reikalingas plotis: 2 200 mm, Four-Column Punching Press Manufacturer: Hermann Raster KG Model: HR SL4S Working Area Distance from ram center or clearance between columns under guide: 160 mm Minimum / maximum distance from clamping table to ram at maximum stroke: 260 / 300 mm Minimum / maximum distance from clamping table to ram guide: 110 / 150 mm Clamping Table Clamping surface: 600 x 320 mm Ram Minimum / maximum stroke: 0 / 40 mm Ejector travel (max. 20 mm) Strokes: 200–1000 per min Ram adjustment: 70 mm Clamping surface: 400 x 250 mm Mounting pin: bore diameter 40 mm; depth 70 mm Gtodpfx Ajwcxccsczet Safety Device Electro-pneumatic clutch and spring-loaded brake Performance Nominal pressure: 25,000 kp Cutting capacity: 625 mm², K=40 kg/mm² Space requirements without soundproof enclosure: 1 m x 1 m x 2.45 m Weight without soundproof enclosure: 3,600 kg Space requirements with soundproof enclosure: 1.60 m x 2.20 m x 2.80 m Drive Type Voltage: 380–660 V Power supply: three-phase current Total connected load: 6 kW Drive: AEG, AM 132 MX4, power 7.5 kW, 2860 rpm Gearbox: PIV, FK NA HB 22 Control cabinet: AEG, 190300 Central lubrication: Woerner, PA 15.M1 Flat/V-belt: 3, 17 x 2220, material rubber Drive type: variable-speed drive Pulley width: 65 mm Pulley diameter: 224 mm Special Equipment Gripper feed Z2 Usable width: 180 mm Sound enclosure by sta Schalltechnische Anlagen GmbH Machine is connected to power and can be tested.

Gamybos metai: 1995, Sąlyga: paruoštas naudoti (naudotas), A Trumpf laser cutting and punching machine with an unknown defect (linear amplifier is functional) is available. Press force: 220 kN, laser power: 1500 W (1.5 kW), maximum punching diameter: 76 mm, maximum workpiece dimensions X/Y: 2585 mm / 1280 mm, maximum sheet thickness for mild steel/stainless steel/aluminium: 8 mm / 6 mm / 4 mm, maximum workpiece weight: 200 kg, part removal system X/Y: 500 mm / 500 mm, magazine positions: 18. Machine dimensions X/Y/Z: approx. 8000 mm / 7500 mm / 2400 mm, weight: approx. 16,000 kg. On-site inspection is possible. Gedpfx Acowftdgezott

Sąlyga: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Mechanical roller feeder BBV202/120 for mounting on BSTA60 Left-hand mounting Drive via main shaft/cardanic shaft of the press – cardan shaft/mounting plate not included in the scope of delivery Gtodor Hmnmopfx Aczst Mechanical feed length adjustment via spindle No encoder attachment available

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1976, Spaudimo jėga: 20 t Stalo dydis: 340 x 320 mm (P x G) Stūmoklio dydis: 160 x 230 mm su pleištine plokšte Anga stale: 70 x 180 mm Didžiausias smūgių skaičius: maks. 150 1/min, tolygiai reguliuojamas per PIV transmisiją Smūgio eiga: 10...50 mm Stūmoklio reguliavimas: 50 mm Gedpfx Acoxg Rvaezjtt Įrengta: • Pasukamas priedų laikiklis padavimui • Motorizuota centrinio tepimo sistema • V formos kreipiančiosios • Staklių korpusas iš ketaus • PIV transmisija smūgių dažniui reguliuoti • Laisvai stovintis valdymo pultas • 3 vnt. kumštelių padavimui ir kt. • Rankinis nustatymas su strypu • Darbas į priekį ir atgal • Dokumentacija ir elektros schemos neprieinamos Papildomai galime pasiūlyti pneumatinį padavimą portui prie presso.

Sąlyga: geras (naudotas), Gamybos metai: 1997, veikimo valandos: 30 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 5820387, perforavimo jėga: 30 t, bendras aukštis: 2 000 mm, bendras plotis: 5 000 mm, bendras ilgis: 15 000 mm, plieno lakšto storis (maks.): 8 mm, darbo diapazonas: 3 000 mm, įvesties srovės tipas: trifazis, X ašies eiga: 2 500 mm, Amada VIPROS 358 KING + LKI L III 250 automatinis pakrovėjas + PR III automatinis iškrovėjas + triukšmo apsaugos gaubtas. Gali veikti visiškai automatiškai, taip pat rūšiuoti jūsų detales ant padėklo. Gjdpfx Acovb Dn Aozjtt Įrenginys buvo labai gerai prižiūrėtas, mes įsigijome šią staklę, bet nebaigėme instaliacijos, nes įsigijome naują įrangą. Staklė turi SICK šviesos barjeras ir originalias apsaugines tvoreles. Dėl daugiau informacijos prašome susisiekti. CNC AMADAN 04 P-C 2 pneumatiniai perforatoriai Šepečių stalas tyliai veiklai ir be įbrėžimų apdirbimui Automatinis lakštinio metalo pozicionavimo įtaisas Oro pūtimo automatinė įrankių tepimo sistema

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2026, spaudimo jėga: 60 t, Pagal užsakymą gaminama staklė Gsdpfx Aoxb D Dajczjtt Greitoji štampavimo automatas BSTA 60 – atnaujintas / kapitalinis remontas Perdarymas į elektrinę pavarą ir naują Unidor PC valdymą. Galima įrankių įdėjimo erdvės plėtra. Susisiekite dėl detalių pasiūlymų.

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, perforavimo jėga: 16 t, maks. lakšto storis: 6 mm, X ašies eiga: 2 070 mm, Y ašies eiga: 1 280 mm, punchingo skersmuo: 76 mm, TECHNICAL DETAILS Punching force: 165 kN Working area: 2,070 x 1,280 mm Sheet thickness: 6.4 mm Workpiece weight: 150 kg Punching diameter: 76.2 mm X-axis: 80 m/min Y-axis: 55 m/min Gtedpfx Acjwur Aaszot MACHINE DETAILS Machine weight: approx. 8,000 kg Control: CC 220 EQUIPMENT

Sąlyga: geras (naudotas), Gamybos metai: 1991, mašinos/transporto priemonės numeris: 0504791315452, Offer 25218 Technical Data: - Pressing force: 350 kN - Punching capacity: e.g. up to 30 mm Ø in steel, 9 mm - or up to 28 mm Ø in steel, 10 mm - or up to 23 mm Ø in steel, 12 mm - Stroke rate: 72 strokes/min - Throat depth: 200 mm - Installation height: 293 mm - Drive: 400 V / 1.5 kW - Required space: approx. W 550 x H 1450 x D 700 mm - Weight: approx. 400 kg Gedpjwuqprjfx Aczjtt Includes: - Stop table with adjustable stops - Electric foot switch - Machine base - Various punch dies with matrix

Sąlyga: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 4203773681008, stalo ilgis: 1 400 mm, stalo plotis: 600 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obliges the buyer to collect the item on time between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Table dimensions: 1,400 x 600 mm Motor: 11.4 kW MACHINE DETAILS Overall width: 2,500 mm Overall length: 2,200 mm Overall height: 2,000 mm Total weight: 1,500 kg Operating voltage: 380 V Frequency: 50 Hz Rated current: 25 A Gtsdpfowvi N Tex Aczot Control voltage: 220 V with transformer Auxiliary voltage: 24 V Circuit breaker tripping current: 0.165 kA Drawings and Numbers Controller No.: 42037.301.01.00 Wiring diagram: 42037.301.01.01 Manufacturer’s serial number: 42037.736.81.008

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Pressing Force: 2,000 kN Table Area: 2,300 x 1,100 mm (W x D) Pass-through Opening: 2 pcs., 700 x 300 mm Distance Between Columns: 2,460 mm Ram Clamping Surface: 2,300 x 1,100 mm Lateral Passage: 740 mm Installation Height: 550 mm (stroke down, adjustment up) Stroke Rate: 30 – 140 strokes/min, infinitely variable Stroke: 20...220 mm Ram Adjustment: 150 mm (motorized) Main Drive: 30 kW Weight: approx. 27,500 kg Version/Features: • Siemens + Beckhoff controls • 8-way slide guides • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromotive stroke adjustment • Siemens + Beckhoff controls • Visualization via Beckhoff panel • T-slots in table and ram (28 mm, 300 mm spacing) • Vibration-damping machine feet • 4 tool locks and 4 cam outputs • Ram with 20 mm central slot • Hydraulic die clamps on table and ram • Hydraulic rollblocks for tool change Strip Feeding Line by Kemmerich, consisting of: Uncoiler Type: V 5000 A – SH – 600 – S Load Capacity: 5,000 kg Strip Width: 100 – 600 mm Expansion Range: 470 – 520 mm Coil Outside Diameter: 2,000 mm • Auxiliary motor drive • Pneumatic disc brake • Hydraulic expansion via sliding wedges • Rear end plate and 3 plug-in side arms at the front • Hydraulic hold-down roller, motor-driven, laterally adjustable via handwheel • Coil car (stationary, uncoiler moves hydraulically), lifting height 770 mm with 4 limiting rods Straightening Machine Type: RMBMZ 50.600 UF Strip Width: 40 – 600 mm Gjdjv T Anljpfx Aczstt Strip Thickness: 0.5 – 4.0 mm Straightenable Cross-section: 1,200 mm² Number of Rolls: 9 pcs. Roll Diameter: 50 mm Number of Feed Rolls: 2 pcs. Feed Roll Diameter: 100 mm Speed: 3 – 25 m/min Features: • Rolls hardened, ground, and hard-chrome plated • Drive for lower straightening rolls and feed rolls via gear drive • Motorized roll stand adjustment via motors, adjustment accuracy 1/100 mm, values can be saved • Upper rolls can be opened by 100 mm • Feed rolls pneumatically releasable • Lateral strip guide at infeed with handwheel and leadscrew • Outfeed roller basket and loop bridge • Loop control by ultrasonic sensor • Hydraulic introduction aid, consisting of table with extendable tongue and upper bending roll Roll Feed Strip Width: max. 600 mm Features: • Rolls hardened, ground, and chrome plated • Driven by gearmotor • Upper roll pneumatically releasable • Height adjustment hydraulic • Lateral strip guide at infeed with handwheel • Roller basket Additional Features: • Pneumatically pivoting loop bridge between straightener and feed • Safety fence around complete system • Uncoiler and straightener on common base frame • Various spare rolls for the straightener The complete system can still be inspected under power at the seller’s site!

Sąlyga: geras (naudotas), Manufacturer: LVD STRIPPIT Model: Global 20 FANUC Control: FANUC 180i-P Year of manufacture: 2006 Thick turret WILSON tool system Inspection under power possible Large package of WILSON tooling Auto-indexing rotary tools included Laser safety guards included Specifications Gedpfx Ajv Ic Tqeczett Metric US Standard Table load capacity: 150 kg Working area X axis: 2500 mm Working area Y axis: 1250 mm Working area X axis with sheet repositioning: 5000 mm Punching force: 20 t Max. sheet thickness: 6 mm Turret stations: 30 Auto-index stations: 4 Positioning speed X and Y axes: 4500 mm/min Turret indexing speed: 900 rpm Dimensions (approximate) Length: 6400 mm Width: 5600 mm Height: 2445 mm Weight: 16,500 kg Please note: The information on this page is provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are implied. We recommend verifying all critical details independently.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2026, spaudimo jėga: 50 t, Individualaus užsakymo staklės Greitaeigis štampavimo automatas B500-950 Gedpfx Ajw U A Dyeczjtt Stalo ilgis – 950 mm, galimi ir 1150 mm arba 1250 mm variantai, Reguliuojama eiga 16–51 mm, Vietoje Bruderer BBV 202/120 ritininio padaviklio galima įrengti servo padaviklį. Susisiekite dėl išsamių pasiūlymų.

Sąlyga: naudotas, Gamybos metai: 1987, Pressure: 40 t Strokes: 500 strokes/min Total Power Requirement: 5.5 kW O F F E R We can offer you the following from stock, subject to prior sale and errors, on a non-binding basis: SCHAAL High-Speed Punching Press Type: SEP 40 Year of Manufacture: 1987 _____ Nominal Press Force: 40 t Stroke Range (min. – max.): 100 - 500 strokes/min Adjustable Stroke Lengths: 8 - 70 mm Ram Adjustment: 70 mm Table Size: 550 x 580 mm Ram Surface (top, approx.): 300 x 340 mm Die Height: 255 mm Front Opening for Tool Change (approx.): 560 mm Adjustable Strip Entry Height: 120 mm Max. Strip Width / Side Clearance (left): 260 / 260 mm Main Drive: approx. 7.5 kW Total Drive: approx. 10 kW - 380 V – 50 Hz Weight: approx. 4,000 kg Accessories / Special Equipment • Strip gripper feed device mounted on the left, Type SZV 2, stroke adjustable, height adjustable • SANDER & EBERT horizontal decoiler, tension-controlled • Continuous and single stroke adjustable, or jog mode, piece counter, blow-off device • Separate floor-standing control cabinet and switchgear cabinet, vibration dampers • Large, complex sound insulation booth (disassembled) Condition: Very good! Was used for precision electronic connectors, regularly maintained! Please click here shortly for a video of the machine: Delivery: Ex stock, immediate availability, FCA Metzingen Payment: strictly net - upon receipt of invoice We look forward to receiving your order. Further mechanical and hydraulic presses and other machine tools available from stock – please check our current inventory on our website: geiger- Gjdpsvu E Iwefx Aczjtt

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2004, veikimo valandos: 5 000 h, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 4 300 mm, hidraulinio cilindro reguliavimas: 100 mm, įrengimo aukštis: 500 mm, stalo aukštis: 1 000 mm, bendras plotis: 2 200 mm, stalo ilgis: 1 400 mm, spaudimo jėga: 200 t, valdymo spintos plotis: 2 000 mm, eigos ilgis: 160 mm, tarpas tarp stulpų: 1 450 mm, darbinis plotis: 1 100 mm, atstumas tarp šoninių atramų: 400 mm, bendras svoris: 27 000 kg, aukščio reguliavimo tipas: elektrinis, reikalingas aukštis: 4 500 mm, vietos reikalavimas ilgis: 2 200 mm, reikalingas plotis: 1 800 mm, High-precision cutting and embossing press, U.T accuracy +/- 0.01 mm, ideal for the production of fuel cell stacks or hydrogen electrolyzers. The press is also suitable for (flat) fine blanking applications, with a stroke rate of 1 - 70 strokes per minute. Thanks to four connecting rod rams, off-center loads are handled with ease. Jamming of the press is impossible. The press is completely overhauled and delivered with a new Siemens S7 control system. Gedpet Nf Agefx Aczjtt

Sąlyga: naujas, AUTOMATINĖ KALENDORIŲ PERFORAVIMO IR ĮRIŠIMO MAŠINA Gedpfxsi Arm Rs Aczott RILECART PB-796

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 5 100 h, Pressing force: 4,000 kN Table surface: 3,000 x 1,400 mm (W x D) Table clamping area: 2,950 x 1,500 mm Ram clamping area: 2,950 x 1,240 mm Installation height: 600 mm (stroke bottom and upper adjustment) Stroke rate: 5 - 100 strokes/min, infinitely variable Stroke: 20...200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Features: - With servo technology, programmable ram speed - Table - mounting plates divided and manually movable - 8-fold slide guide - Motorized oil central lubrication - Automatic ram adjustment - Pneumatic ram weight compensation - Electromotive stroke adjustment - Siemens + Fanuc control - Visualization with Siemens Panel PC on movable console - 8-point tool safety system - Tool data storage - 2-channel pressing force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal slot in ram for tool centering - Vibration-damping machine feet - Pass-through opening in table - Hydraulic ball bars in table - Tool change consoles for hanging Equipped with a complete coil feeding line by Lorenz Decoiler Gjdpepvlf Sjfx Aczjtt Load capacity: 80 kN Strip width: 20 - 820 mm Expansion range: 470 – 520 mm Coil diameter: max. 1,800 mm Straightener Strip width: max. 820 mm Strip thickness: 0.5 – 4.0 mm Straightening cross-section: 1,600 mm² Number of rollers: 9 pcs., Ø 65 mm + 2 pcs. feed rollers Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross-section: max. 2,400 mm² Number of rollers: 2 pcs. Ø 120 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: W400-RM-016, įvesties srovės tipas: trifazis, bendras svoris: 1 700 kg, Zemat rotary die cutting machine W-18-200 Working width: 1800 mm, daylight between rollers: 100 mm Gtedpfx Aswcm Tieczjt

Sąlyga: naudotas, An automated punching press in format 72 x 102 cm Equipped with: Max. sheet size: 720 x 1020 mm Min. sheet size: 350 x 400 mm Press force: 2.5 MN (250 tons) Feed and delivery without gripper edge Max. speed: 7,500 sheets/hour Gsdpfxswvmgio Aczott Quick-lock system Suction head feeder Cutting section Stripping section and waste removal In good condition

Sąlyga: naudotas, Gamybos metai: 1993, Sheet width 1550 mm Sheet length 2525 mm Sheet thickness 6.4 mm Punching force 200 kN Gtodpfx Acsvh Ndpszot Positioning speed X-axis 50 m/min Positioning speed Y-axis 50 m/min Stroke rate 200 / 400 strokes/min Control unit MNC 32000 Tool changer 22 positions Total power requirement 7.5 kW

Sąlyga: naudotas, Žirklės/skylamušis FICEP 604 N Pagaminimo metai: 2002 Kirpimo galia: 60 T Gedpfxsxnixve Aczstt Ketaus kirpimo pajėgumas: 100 x 100 x 10 mm Apvalių strypų kirpimo pajėgumas: Ø 45 mm Kvadratinių strypų kirpimo pajėgumas: 42 mm Plieninių lakštų kirpimas: ilgis 350 x 16 mm maks. (žiūrėti lentelę) Skylamušimas: maks. Ø 32 x 16 mm storis Parduodama su daugybe skirtingų skylių štampų Įtampa: 380 V Matmenys (I x P x A): 1700 x 800 x 2200 mm Svoris: apie 2 T