Skylė Perforavimo Mašina pirkti naudotą (39 372)

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1983, Press force: 2,000 kN Stroke rate: 60 strokes/min Adjustable stroke: 20 - 120 mm Installation height: 450 mm (maximum stroke, top position) Ram reinforcement: 100 mm Table size: 850 x 810 mm Itjdpfx Asgpxc Sjbvjg Pass-through opening: 00 x 0 mm Ram surface: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-fold ram guidance - Hydraulic overload protection - Motorized oil circulation lubrication - Motorized ram adjustment - Manual stroke adjustment - Pneumatic ram weight compensation cylinder - Vibration-damping machine feet

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Pressing Force: 2,000 kN Table Area: 2,300 x 1,100 mm (W x D) Pass-through Opening: 2 pcs., 700 x 300 mm Distance Between Columns: 2,460 mm Ram Clamping Surface: 2,300 x 1,100 mm Lateral Passage: 740 mm Installation Height: 550 mm (stroke down, adjustment up) Stroke Rate: 30 – 140 strokes/min, infinitely variable Stroke: 20...220 mm Ram Adjustment: 150 mm (motorized) Main Drive: 30 kW Weight: approx. 27,500 kg Version/Features: • Siemens + Beckhoff controls • 8-way slide guides • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromotive stroke adjustment • Siemens + Beckhoff controls • Visualization via Beckhoff panel • T-slots in table and ram (28 mm, 300 mm spacing) • Vibration-damping machine feet • 4 tool locks and 4 cam outputs • Ram with 20 mm central slot • Hydraulic die clamps on table and ram • Hydraulic rollblocks for tool change Strip Feeding Line by Kemmerich, consisting of: Uncoiler Type: V 5000 A – SH – 600 – S Load Capacity: 5,000 kg Strip Width: 100 – 600 mm Expansion Range: 470 – 520 mm Coil Outside Diameter: 2,000 mm • Auxiliary motor drive • Pneumatic disc brake • Hydraulic expansion via sliding wedges • Rear end plate and 3 plug-in side arms at the front • Hydraulic hold-down roller, motor-driven, laterally adjustable via handwheel • Coil car (stationary, uncoiler moves hydraulically), lifting height 770 mm with 4 limiting rods Straightening Machine Type: RMBMZ 50.600 UF Strip Width: 40 – 600 mm Strip Thickness: 0.5 – 4.0 mm Straightenable Cross-section: 1,200 mm² Number of Rolls: 9 pcs. Roll Diameter: 50 mm Number of Feed Rolls: 2 pcs. Feed Roll Diameter: 100 mm Itsdjv T Anlspfx Abvsg Speed: 3 – 25 m/min Features: • Rolls hardened, ground, and hard-chrome plated • Drive for lower straightening rolls and feed rolls via gear drive • Motorized roll stand adjustment via motors, adjustment accuracy 1/100 mm, values can be saved • Upper rolls can be opened by 100 mm • Feed rolls pneumatically releasable • Lateral strip guide at infeed with handwheel and leadscrew • Outfeed roller basket and loop bridge • Loop control by ultrasonic sensor • Hydraulic introduction aid, consisting of table with extendable tongue and upper bending roll Roll Feed Strip Width: max. 600 mm Features: • Rolls hardened, ground, and chrome plated • Driven by gearmotor • Upper roll pneumatically releasable • Height adjustment hydraulic • Lateral strip guide at infeed with handwheel • Roller basket Additional Features: • Pneumatically pivoting loop bridge between straightener and feed • Safety fence around complete system • Uncoiler and straightener on common base frame • Various spare rolls for the straightener The complete system can still be inspected under power at the seller’s site!

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 5 100 h, Pressing force: 4,000 kN Table surface: 3,000 x 1,400 mm (W x D) Table clamping area: 2,950 x 1,500 mm Ram clamping area: 2,950 x 1,240 mm Installation height: 600 mm (stroke bottom and upper adjustment) Stroke rate: 5 - 100 strokes/min, infinitely variable Stroke: 20...200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Features: - With servo technology, programmable ram speed - Table - mounting plates divided and manually movable - 8-fold slide guide - Motorized oil central lubrication - Automatic ram adjustment - Pneumatic ram weight compensation - Electromotive stroke adjustment - Siemens + Fanuc control - Visualization with Siemens Panel PC on movable console - 8-point tool safety system - Tool data storage - 2-channel pressing force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal slot in ram for tool centering - Vibration-damping machine feet - Pass-through opening in table - Hydraulic ball bars in table - Tool change consoles for hanging Equipped with a complete coil feeding line by Lorenz Decoiler Load capacity: 80 kN Strip width: 20 - 820 mm Expansion range: 470 – 520 mm Coil diameter: max. 1,800 mm Straightener Strip width: max. 820 mm Strip thickness: 0.5 – 4.0 mm Straightening cross-section: 1,600 mm² Number of rollers: 9 pcs., Ø 65 mm + 2 pcs. feed rollers Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross-section: max. 2,400 mm² Itedpfx Abepvlf Sevjg Number of rollers: 2 pcs. Ø 120 mm

Būklė: geras (naudotas), Gamybos metai: 1986, veikimo valandos: 10 000 h, Press force: 30 tons (US) approx. 270 kN Table size: 762 x 533 mm = 30" x 21" Ram area: 800 x 300 mm Strokes per minute: 100...1400 rpm Itsdpjnl Snsfx Abvsg Stroke (fixed): 25.4 mm = 1" Ram reinforcement: 44.5 mm = 1.75" Features: * Hydraulic clutch * Roller feed Manufacturer: Sankyo Model: Variax V70 Max. strip width: 100 mm Only approx. 10,000 operating hours

Būklė: geras (naudotas), Gamybos metai: 1984, Pressing force: 800 kN Strokes per minute: 30 – 200 1/min, adjustable via PIV gearbox Adjustable stroke: 20 – 100 mm Shut height: 500 mm (largest stroke, ram in top position) Ram reinforcement: 75 mm Table area: 1,010 x 800 mm Pass-through opening: 700 x 150 mm Ram area: 860 x 700 mm Drive power: 22 kW Features: - 2 connecting rods - 8-way ram guide - Hydraulic overload protection - Motorized oil circulation lubrication - Motorized ram adjustment - Electro-pneumatic stroke adjustment Including complete strip feeding line by ALBA, consisting of: Uncoiler Outside diameter max. 1,400 mm equipped with: • Uncoiler traversing device • Hydraulic loading station • Hydraulic auxiliary drive • Hydraulic expansion 480 – 530 mm • Hydraulic traversing device • Hydraulic hold-down roll, laterally adjustable by handwheel • Strip edge limit arms Straightening machine Type: Ma Ria 9 Strip width: max. 400 mm Strip thickness: 0.5 – 5.0 mm Number of feed rollers: 2 pcs, Ø 120 mm, upper hydraulically liftable Number of straightening rollers: 9 pcs, Ø 60 mm, upper rollers individually hydraulically adjustable, position indicated by micrometer, all rollers supported Equipped with: Itedpfx Abjdhzf Ievsg • Hydraulic strip threading aid, table with tongue and hold-down roll • Side strip guide at infeed with asymmetric adjustment • Side strip guide at outfeed • Outfeed roller basket • Loop control via sensors • Lateral loop guide Roller feeder Type: Vhy 400 Strip width: max. 400 mm Strip thickness: max. 5.0 mm Height adjustment via hydraulic jacks Press or strip line can also be offered separately.

Būklė: naudotas, used Manufacturer: Rapid Itjdpovwfmrofx Abvjg Number of spindles: 3 pcs. Wall-mounted machine Column reach: approx. 500 mm Storage location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-is condition as inspected, without warranty or guarantee

Būklė: naudotas, used, excellent condition, low operating hours Manufacturer: Ayen Model: ED 08-3 Iedevwgd Sspfx Abvstg Motor power: 0.6 kW Number of spindles: 3 units Wall-mounted machine, foldable Manual operation Column reach approx. 500 mm Drill chuck: Morse taper MK 1 Space requirements (LxWxH): approx. 1100 x 300 x 1000 mm Location: 97447 Gerolzhofen Sold as is - free loaded -

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Mechanical roller feeder BBV202/120 for mounting on BSTA60 Left-hand mounting Drive via main shaft/cardanic shaft of the press – cardan shaft/mounting plate not included in the scope of delivery Mechanical feed length adjustment via spindle Itjdpfx Asr Hmnmjbvsg No encoder attachment available

Būklė: labai geros būklės (naudotas), Trumpf We are offering a laser and punching machine for sale. Technical Specifications: Power Supply: 400V/50 Hz Fusing: 3 x 100 A Connected Load: 65 kVA Working Range X x Y (without repositioning): - Combined operation: 2585 x 1280 mm - Punching operation: 2585 x 1370 mm - Laser operation: 2585 x 1280 mm Performance: - Laser power: 2000 W - Maximum sheet thickness: 8 mm - Maximum punching force (incl. 20 kN stripper): 220 kN - Active stripper (program adjustable in stages): 4.5-20 kN - Maximum workpiece weight: 200 kg - Maximum pass-through height: - Punching: 35 mm - Laser: 22 mm Speeds: - X axis: 90 m/min Itedom Ak Huspfx Abvsg - Y axis: 60 m/min - Simultaneous stroke rate: - Punching: 900 strokes/min - Marking: 2800 strokes/min - C axis: - Punching: 60 rpm - Thread forming: 330 rpm Tools: - Tool stations in linear magazine: 19 (with 2 clamps) - Number of tools with multitool: 19 to 190 tools - 360° continuous rotation of all tools - Tool change time: 1.5-5 s Maximum punch diameter: - Single stroke: 76.2 mm at all tool stations - Standard Multicut: 200 mm - Maximum bending height: 25 mm - Maximum part size: 500 x 500 mm Accuracy: - Position deviation: ±0.1 mm - Mean position scatter: ±0.03 mm TRUMPF CNC Control: - Base: Siemens SINUMERIK 840D - Type: TC 6000 L 1300 Loading and dismantling must be handled by the buyer! Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors!) For further inquiries, feel free to contact us by phone.

Būklė: geras (naudotas), Stock number: 2832 Machine number: 3004/73 Manufacturer: Raster Year of manufacture: 1973 Type / Model: HR40NL Pressing force: 40 t Table size: 650 x 385 mm Ram size: 350 x 190 mm Throat depth: 175 mm Distance table to bottom edge of ram: 300 mm Pass-through hole: 350 x 130 mm Ram adjustment: 80 mm Ram stroke: Adjustable from 0 to 70 mm Installation height: 235 to 305 mm Sheet width: 10 to 200 mm Sheet thickness, continuous stroke: mm Strokes per minute: 40 to 180 /min Connection: 4 kW Accessories/Equipment: Gripper feed Condition: good Weight: approx. 4 t Iodpfx Aerdgncebvetg Machine dimensions: 1,400 x 1,800 x 2,250 mm

Būklė: naudotas, Gamybos metai: 1992, Number of spindles in row: 16 Number of horizontal spindles: 5 Cup hinge boring head: yes Drill pitch: 32 mm Hold-down device: yes / pneumatic Ijdewv Nb Nspfx Abvjtg Power consumption: 2.2 kW Drilling unit: swiveling

Būklė: naudotas, Gamybos metai: 1987, Funkcionalumas: nepatikrintas, spaudimo jėga: 20 t, eigos ilgis: 38 mm, bendras svoris: 3 600 kg, BSTA 20 H su BBV 190/85 padavimu iš kairės, pagaminimo metai 1987, reguliuojamas eiga 8–38 mm, vardinė spaudimo jėga 20 t, didžiausias įrankio montavimo plotis 420 mm. Tinka atsarginėms dalims arba remontui. Parduodama „kaip yra“ būklėje be techninės apžiūros. Susisiekite su mumis dėl daugiau informacijos! Isdpfjw S E Tlox Abvotg

Būklė: geras (naudotas), Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, Spaudimo jėga: 2x200 kN, kėlimų skaičius: 40 - 300 kėlimų/min., eiga: 50 mm, sankaba: pneumatinė, įtampa: 380 V, įrenginio svoris: 2.200 kg, papildomas išstūmiklis, gamykliškai sustiprinta konstrukcija. Itedpfx Aboxx T Hfsveg

Būklė: naudotas, Row drilling & fitting boring machine LAUTENSCHLÄGER Meplamat 300 - Pneumatic hold-down device Isdpfx Aovtm Ayjbvstg - Insertion unit - Stop rulers/guides

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2000, Renz Super 700 ir sunkiųjų popieriaus gręžimo mašinų serija. Sunki mašina su nauja pavaros sistema, pritaikyta nepertraukiamam gręžimui ir perforavimui. Gręžimo plotis iki 700 mm (27,5 colio) Super 700 modeliui. Paprastas valdymas kojiniu jungikliu. Horizontalus popieriaus įstatymas užtikrina tikslų gręžimą didelių formatų atveju. Be to, šis dizainas leidžia išilgai kiekvienoje lapo pozicijoje grioveliuoti arba perforuoti nuplėšimui. Atvira konstrukcija sudaro galimybę gręžti dvigubo ilgio formatus. Itin didelė gręžimo galia. Dar vienas didelis Super 700 privalumas – tinkantys daugumos konkurentų gamintojų gręžimo štampai, jei pakeičiate montavimo adapterį. Štampų keitimas greitas ir paprastas. Šioje mašinoje galima naudoti dvigubus štampus su 2 žingsniais arba tipais viename štampe, taip sumažinant nustatymo laiką keičiant gręžimo modelius. PRIDEDAMI ĮRANKIAI: - 2:1 žingsnis: 6x6 mm skylės - 3:1 žingsnis: 4,5 mm apvalios skylės Iodpfx Asxu Uqksbvetg - 3:1 žingsnis: 4,5 mm apvalios skylės su kalendoriaus įpjova

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, Table clamping surface: 600 x 300 mm Coordinate travel: X 350 / Y 250 mm Adjustment range W-axis (motorized): 200 mm Servo-controlled EDM axis Z: 340 mm Drilling with electrodes from Ø 0.2 to 4 mm Itodew Hyfyepfx Abveg Max. workpiece weight: 300 kg Connected load: 3.5 kVA Machine weight: 700 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, A used four-column punching press MABU with MPC200 control in very good technical condition. Press force, 30° before BDC: 250 kN Stroke rate, steplessly adjustable: 80–400 strokes/min Iodpfeuh U Etex Abvjtg Stroke adjustment: 7–62 mm Tool holder: Diameter 40H7 x 90 mm Clearance between uprights (front/side): 404/334 mm For further technical data, see PDF document. Technical data and dimensions: subject to change/errors excepted.

Gamybos metai: 1986, būklė: naudotas, • Working length (mm): 3200 • Drilling units: 3 from below with 3-spindle drilling head Ieds Drmxjpfx Abvotg • Hold-downs: 2 from above • Pressure cylinder: 1 lateral • Control system: Siemens, newer model year

Būklė: labai geros būklės (naudotas), Gamybos metai: 1968, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 32250, Išmatavimai 64 x 90 cm, tik iškirtimui, puikios būklės Mašinos Nr.: SBDS32250 Iedpfx Abow Inz Djvetg

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, gręžimo gylis: 1 000 mm, padavimo ilgis X ašis: 1 650 mm, padavimo eiga Y ašimi: 1 000 mm, Z ašies eigos atstumas: 360 mm, veleno greitis (maks.): 4 200 aps./min, gręžimo skersmuo: 40 mm, greitas poslinkis X ašimi: 10 m/min, greitas poslinkis Y ašis: 10 m/min, greitasis eiga Z ašyje: 10 m/min, ašies variklio galia: 10 000 W, stalo ilgis: 700 mm, stalo plotis: 1 400 mm, stalo apkrova: 4 000 kg, padavimo ilgis W ašis: 500 mm, Selca S4040D Numerical Control Drilling depth, transverse movement V-axis: 1,000 mm Column, longitudinal movement X-axis: 1,650 mm Drilling slide, vertical movement Y-axis: 1,000 mm Drilling slide, workpiece support movement W-axis: 500 mm Drilling slide, vertical swiveling max – A-axis: +20° / -20° Rapid traverses, adjustable speed up to 10,000 mm/min Drilling diameter in solid material, min-max: 5 - 40 mm Drilling spindle, rotation, adjustable speed: 1 - 4,200 rpm Drilling spindle motor power: 10 kW Fixed clamping table, dimensions: 700 x 1,400 mm Iedpfoxpwf Tex Abvjtg Standard T-slots for clamping: 18 mm Hydraulic pump motor power: 7.5 kW Gun drill holder; shank for drills > 6: 10 x 40 mm Gun drill holder; shank for drills < 6: 25 x 70 mm Clamping table (B-axis): ROTARY & "BARRASENO" Dimensions: 800 x 1,000 mm Standard T-slots for clamping: 18 mm Maximum axial load (rotary): 4,000 kg Continuous radial resolution B-axis: 360,000 div/rev Maximum vertical tilt "BARRASENO" – B1-axis: +20° / -20° Small milling – tapping head etc. Maximum horizontal working stroke Z-axis (830): 360 mm Spindle rotation, adjustable speed up to 2,200 rpm Tapping spindle motor power: 10 kW ISO40 tool changer with 10 rotating/translating stations USED MACHINE

Būklė: geras (naudotas), Gamybos metai: 1998, Clean, used punching machine from Euromac Model: CX 1000 30 Capacity: 30 tons Itodpfxoxld R Ij Abvog Throat depth: 1000 mm Repositioning up to 10,000 mm Includes tool cabinet with extensive tooling and multitool

Būklė: geras (naudotas), Gamybos metai: 1990, veikimo valandos: 39 687 h, Funkcionalumas: visiškai funkcionalus, Bruderer BSTA 200 Itedpetraadsfx Abvjg High-Speed Punching Press. Max. Pressing Force: 200 kN / 20 t Speed Range: 100 – 600 spm Year of Manufacture: 1990. Feed Unit BBV on the left side. Adjustable Stroke: 8; 13; 19; 25; 32; 38; 44; 51 mm Ram Height Adjustment: 51 mm Clamping Plate Dimensions: 510 x 400 mm Bed Opening: 400 x 160 mm Max. Tool Width Between Columns: 410 mm Connected Load: 36 kVA Power Supply: 400 V 50 Hz Control Voltage: 24 V Machine Dimensions: H 2540 x W 1661 x D 855 mm Machine Weight: approx. 3100 kg Control cabinet and control system included. Includes all original technical documentation. Also available in stock: High-speed presses by Mabu, Schaal, Bihler, and other Bruderer models.

Būklė: visiškai atnaujintas (naudotas), Maximum pressing force: 180 kN (18 tons). Strokes per minute: 100 to 600. Maximum strip width: 60 mm. Maximum feed length: 60 mm. Maximum strip thickness: 2 mm. Itodpofmavxjfx Abvsg Adjustable stroke: 4 - 36 mm. In very good condition. Programmable speed and stroke count. Three operating modes: manual, single stroke, and automatic. Pneumatic clutch and brake. Machine supplied with a 6-month warranty. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx. 1.2 tons. Power consumption: 2.2 kW. Compressed air: 8 bar. We have more high-speed presses in stock from Bruderer (models BSTA 18, 20, 30, 200, 50), as well as presses from Schaal and Mabu.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1995, veikimo valandos: 41 000 h, Funkcionalumas: visiškai funkcionalus, FOR SALE: BRUDERER BSTA 50USL High-Speed Stamping Press With automatic feeder BBV 190 500 kN | 100–1120 strokes/min | Fully automatic | Swiss top quality Technical Highlights: Rated force: 500 kN Stroke rate: 100–1120 strokes per minute Operating hours: 41,000 h Main drive: 22 kW Control voltage: 24V DC Power supply: 400V / 50Hz / 62 kVA Adjustable stroke: 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment: 64 mm Working Areas: Max. tool installation width: 1100 mm Strip feed width: up to 256 mm Ram area: 980 × 420 mm Table area: 1080 × 650 mm Adjustable strip entry height: 60–140 mm Max. strip width: 120 mm Max. feed length: 85 mm Max. material thickness: 4 mm Feed angle: 180° Itodewpg Rbepfx Abveg Machine Dimensions (incl. BBV 190): Setup dimensions (L × W × H): 2407 × 1278 × 3150 mm Weight (approx.): 8,000 kg Features: Feeding system BBV 190 – fully synchronized mechanical strip feeder Integrated control cabinet Pneumatic clutch and brake Adjustable stroke and ram height Compressed air connection: 6–10 bar Oil cooling unit included Ready for integration into peripheral systems Condition & Delivery: Machine in excellent technical and visual condition Fully serviced and tested Immediately available ex Europe Worldwide shipping and installation support available Contact us today for pricing and further technical details. We are happy to help you modernize your production line with Swiss precision.

Būklė: geras (naudotas), Gamybos metai: 1996, veikimo valandos: 51 573 h, hidraulinio cilindro reguliavimas: 51 mm, stalo ilgis: 510 mm, stalo plotis: 400 mm, įėjimo įtampa: 400 V, Bruderer BSTA200M High-Performance Punching Press. Max. pressing force: 200 kN (20 tons). Speed range: 100 – 1800 spm. Year of manufacture: 1996. BBV 101/75 feeder on the right side. Max. strip width: 160 mm. Max. feed length: 85 mm. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 mm. Ram height adjustment: 51 mm. Isdpfeq A Uahox Abvetg Dimensions of clamping plate: 510 x 400 mm. Bed opening: 400 x 160 mm. Max. tool width between columns: 410 mm. Max. material passage width: 260 mm. Connected load: 36 kVA. Power supply: 400 V / 50 Hz. Control voltage: 24 V. Machine dimensions: H 2540 x W 1661 x D 855 mm. Machine weight: approx. 3100 kg. Safety enclosure (Schaal guard) is not included with the machine and is sold separately. Control cabinet and control system included. All original technical documentation included. Also available from stock: High-speed presses by Mabu, Schaal, Bihler, and other Bruderer models.