Si 550 pirkti naudotą (9 998)

Būklė: naudotas, Lippert infeed and outfeed conveyors, belt conveyor GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical Specifications: - Conveyor length (NL): 640 mm or 815 mm with belt width 400, or 820 mm with belt width 600 - Frame width (NB): 550 mm / 750 mm - Belt width (GuB): 400 mm / 600 mm - Overall height (BH): 105 mm - Support feet: optionally available - Conveyor speed (v m/s): speed is adapted to main conveyor via gearing - Drive: toothed belt drive Rodpfx Aemqty Ujf Aet - Return pulley (UR): Ø = 81 mm - Drive drum (AT): Ø = 81 mm Optional Accessories: - Supports - Side guides (one-sided or double-sided) Please note: A suitable gear wheel must be installed on the output shaft for the drive transfer. This may require a different return pulley. If needed, please contact us for advice on this matter. Defective belts will be replaced prior to delivery. Prices are net, excluding VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg. For individual, professional advice, simply contact us. Contact us by phone or email. We are happy to assist you in the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics

Būklė: naudotas, Gamybos metai: 2001, Transnorm Belt Curve Conveyor Left GKF 20°-750-550 IR1300 RA1479 The Transnorm belt curve conveyor is in good (used) condition and is fully functional. It is equipped with a SEW brand gear motor. Supports and side guides are not included in the scope of delivery but are optionally available upon request. Belt curves are widely used in intralogistics for the in-house transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves impress with their performance and reliability. Thanks to a low-tension drive across the entire belt width, continuous operation over long periods is easily achievable. Conical drums and a specially designed belt guiding system ensure maximum running smoothness. The images shown depict the conveyor system while still installed at a logistics center. Technical Specifications: Rodpfx Afsk Abcge Ajt Model: Belt Curve Conveyor TS 1600-105 Conveying length (middle radius, NL): 640 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Height (BH): 210 mm Inner radius (IR): 1300 mm Conveyor angle: 20° Support feet and side guides available on both sides as an option Conveying speed (v m/s): 0.03–1.05 m/s Drive: SEW geared motor SA37/1 DT71D4/MM3/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Belt: double-layer, green, smooth, KT36 (see images for wear) Year of manufacture: 2001 Optionally available: - Supports - Side guides, single-sided or double-sided All prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert consultation, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, The team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Būklė: naudotas, Ritininių konvejeris su 90° grandinės stūmikliu RA1847 Tipas: Transnorm 9900-600-500 Transportavimo ilgis (FL): 9900 mm Ritinių plotis (RB): 550 mm Nominalus / išorinis plotis (NB): 600 mm Grandinės stūmiklio plotis: 700 mm Montavimo aukštis (BH): 140 mm Guolių ratukų atstumas: 80 mm Įskaitant pneumatinį stabdiklį Pasirenkami priedai: Laikikliai Redpok Abg Isfx Af Ast Krašto kreipiančiosios viena- arba abipusės Dažnio keitiklis Kainos nurodytos be PVM iš centrinio sandėlio Dr. Sonntag GmbH & Co KG, 97076 Würzburg Norėdami gauti individualią, profesionalią konsultaciją, susisiekite su mumis. Kreipkitės telefonu arba el. paštu. Mielai padėsime planuojant ir įgyvendinant Jūsų projektus. Laukiame Jūsų užklausos. Pagarbiai, Dr. Sonntag GmbH & Co. KG komanda Jūsų intralogistikos specialistas ir kontaktinis asmuo.

Būklė: naudotas, Lippert infeed and outfeed conveyors, belt conveyor GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical Specifications: - Conveyor length (NL): 640 mm or 815 mm with belt width 400, or 820 mm with belt width 600 - Frame width (NB): 550 mm / 750 mm - Belt width (GuB): 400 mm / 600 mm - Overall height (BH): 105 mm - Support feet: optionally available - Conveyor speed (v m/s): speed is adapted to main conveyor via gearing - Drive: toothed belt drive - Return pulley (UR): Ø = 81 mm Rsdpfemqty Rjx Af Aot - Drive drum (AT): Ø = 81 mm Optional Accessories: - Supports - Side guides (one-sided or double-sided) Please note: A suitable gear wheel must be installed on the output shaft for the drive transfer. This may require a different return pulley. If needed, please contact us for advice on this matter. Defective belts will be replaced prior to delivery. Prices are net, excluding VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg. For individual, professional advice, simply contact us. Contact us by phone or email. We are happy to assist you in the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics

Būklė: naudotas, Gamybos metai: 2007, Gebhardt 90° Roller Curve Conveyor Right 610-550 with 2 Straight Sections RA1282 The Gebhardt roller curve is from 2007 and is in very good (used) condition. It is equipped with an SEW brand motor. Supports are included in the scope of delivery. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 014.15 Year of manufacture: 2007 Condition: very good (used) Motor: fully functional Angle: 90° Inside radius (IR): 850 mm Nominal/Outside width (NB): 610 mm Usable width (NUB): 550 mm Length of straight sections: 1 x 300 mm + 1 x 150 mm Motor type: SEW geared motor Motor output: 0.37 kW/S1 50 Hz 2.00/1.15 A Conveying speed: 0.37 m/sec Drive: head drive Rollers: Type G6/50, glide-bearing with conical plastic end piece Weight: 110 kg Delivery includes: with supports, 670 mm upper edge of rollers Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Rodpfxjk Aa Ryo Af Aet For individual, expert advice, simply contact us. You can reach us easily by phone or email. We are happy to assist with planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics

Būklė: naudotas, Gamybos metai: 2001, Transnorm Belt Curve Conveyor Left, GKF 180°-750-550 IR1000 RA1483 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It features a SEW brand geared motor. Supports are not included in the delivery scope but are optionally available upon request. Belt curves are widely used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves excel with their performance and reliability. The low-tension drive across the entire belt width allows for extended operating times. Tapered rollers and a specially designed belt guidance system ensure maximum smooth running. The displayed images show the conveyor system in its currently installed state at a logistics center. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying length (center radius, NL): 4,820 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Frame height (BH): 210 mm Inner radius (IR): 1,000 mm Conveying angle: 180° Support legs: optionally available Conveying speed (v m/s): adjustable up and down via frequency inverter Drive: SEW geared motor SA37 DT80N4/MM07/BW1 Electrical data: 50 Hz, 380–500 V, 0.15 / 0.75 kW, S1 Belt: double-layered, green, smooth, KT36 (see images for wear) Year of manufacture: 2001 Special features / accessories: Side guides included on both sides Rjdok Abcropfx Af Ajt Optionally available: support legs Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert consultation, please feel free to contact us. Reach us by phone or email—we are happy to assist with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics.

Būklė: naudotas, Gamybos metai: 2001, Transnorm Belt Curve Conveyor GKF 3900-750-550 IR850 RA1382 The Transnorm belt curve is in good condition (used) and fully functional. It is equipped with a SEW brand geared motor. Support stands are not included in the scope of delivery, but are optionally available upon request. Rsdsk Aa T Ropfx Af Ast Belt curves are frequently used in intralogistics for in-plant transport of unit goods and have become indispensable in modern distribution centers. Transnorm belt curves are known for their performance and reliability. Thanks to a low-tension drive across the entire belt width, long operating times are not a problem. Tapered rollers and a specially developed belt guiding system ensure maximum running smoothness. The images shown of the conveyor system were taken in its installed state in a logistics center. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying length, middle radius (NL): 3900 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Conveyor height (BH): 210 mm Inner radius (IR): 850 mm Conveying angle: 160° Support feet: optionally available Conveying speed (v m/s): adjustable up and down via frequency inverter Drive: SEW geared motor SA37/T DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Belt: double-layer, green, smooth Year of manufacture: 2001 Special features / accessories: side guides included on both sides Optionally available: - Support stands - Side guide on one or both sides Prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Contact us by phone or email. We will be happy to assist you with the planning and realization of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG your expert partner for intralogistics.

Būklė: naudotas, Gamybos metai: 2007, Gebhardt Roller Diverter Sorter Ejector 45° 2400-1300-550 RA1147 Type 356.10 Year of manufacture: 2007 Permissible load: 30 kg/m Own weight: 40 kg/m Roller width: 550 mm Nominal/External width (NB): 610 mm Pusher element: Roller segments Set installation height: 680 mm Conveying speed: 0.35 m/sec. Brake for accumulation operation on ejection line Ejector mechanism drive: Electric Conveyed goods dimensions (L x W): 600 mm x 400 mm Optional: Rodpfx Afjk Aa Ebo Ajt Customised height upon request Electric add-ons such as photoelectric sensors, barcode readers Control/software Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Būklė: naudotas, Gamybos metai: 2007, Gebhardt Roller Conveyor Diverter 45° 1900-1800-550 RA1149 Year of manufacture: 2007 Permissible load: 30 kg/m Redsk Aa Eijpfx Af Ajt Dead weight: 40 kg/m Roller width: 550 mm Nominal/Outer width (NB): 610 / 1800 mm Conveyor length: 1900 mm Diverting element: Rollers Set installation height: 680 mm Conveying speed: 0.35 m/sec Brake for accumulation operation on outfeed conveyor Outfeed mechanism drive: Electric Dimensions of conveyed goods: L x W = 600 mm x 400 mm Optional: Adjustable height to customer specifications Electric add-on components such as photoelectric sensors, barcode scanners Control unit/software Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual and professional advice, please feel free to get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and partner for intralogistics

Būklė: naudotas, Gamybos metai: 2000, Transnorm Belt Curve Conveyor Right GKF 70°-730-550 IR600 RA1936 Rsdpfx Aek Ablpsf Aet The Transnorm belt curve is fully operational. It comes equipped with an SEW gear motor. Support legs are not included in the scope of delivery but are optionally available on request. Belt curves are frequently used in intralogistics for internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive across the entire belt width, they are suitable for long operating times. Tapered drums and a specially developed belt guiding system ensure maximum running smoothness. Technical data: Frame width (NB): 730 mm Belt width (GuB): 550 mm Height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees Support feet: optionally available Conveying speed (v m/s): continuously adjustable with frequency converter between 0.032–1.17 m/s Drive: SEW gear motor Electrical data: 50Hz V380–500, kW 0.55 / S1 Year of manufacture: 2000 Scope of delivery: without support legs Optionally available: Support legs Side guides (single- or double-sided) Prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For tailored, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and execution of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics.

Būklė: naudotas, Gamybos metai: 2001, Transnorm Belt Curve Conveyor Left GKF 45°-750-550 IR700 RA1451 The Transnorm belt curve is in good condition (used) and fully operational. It is equipped with a SEW brand gear motor. Supports are not included in the scope of delivery but are optionally available upon request. Belt curves are frequently used in intralogistics for in-house transport of piece goods and are indispensable in modern distribution centers. Transnorm belt curves are renowned for their performance and reliability. Thanks to a low-tension drive system across the entire belt width, long operating cycles are no issue. Tapered rollers and a specially designed belt guidance system ensure maximum running smoothness. The displayed photos show the conveyor system while still installed in a logistics center. Technical Specifications: Model designation: Belt Curve Conveyor TS 1600-105 Conveyor length at center radius (NL): 680 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Installation height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 45° degrees Support legs: optionally available Conveying speed (v m/s): 0.03–1.05 m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz, V380-500, kW 0.11 / 0.55 / S1 Belt: double-ply, green, smooth, KT36 (wear as shown in the photos) Year of manufacture: 2001 Optional items included: - Supports Rodpfx Aek Aba Tof Aot - Side guide (single-sided and double-sided) Prices net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert consultation, simply get in touch with us. Contact us by phone or e-mail. We are happy to support you in the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Būklė: naudotas, Gamybos metai: 2007, Gebhardt Roller Curve Conveyor 2 x 90° Left 610-550-300 with Straight Section RA1210 The Gebhardt roller curve conveyors with straight section are from 2007 and in good (used) condition. They feature a central motor by SEW. Supports are not included in the scope of delivery but are optionally available upon request. Technical Specifications: Manufacturer: Gebhardt Type: 1070.113 Year of manufacture: 2007 Condition: good (used) Motor: fully functional Rsdpfx Aek Aa Nbsf Aet Angle: 2 x 90° with straight section Outer width: 610 mm Clamping length: 550 mm Length of straight section: 300 mm Roller type: G6/50, gliding bearing with conical plastic moulded part Load capacity: 30 kg/m Motor type: SEW geared motor Motor power: 0.37 kW/S1 Frequency: 50 Hz, Amps: 2/1.15 Conveying speed: 0.35 m/s Weight: 110 kg Scope of delivery: without supports (available on request) Optional: Supports For customised, professional advice, please do not hesitate to contact us. Get in touch with us by phone or email. We will be happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and partner for intralogistics

Būklė: naudotas, Gamybos metai: 2001, Transnorm Belt Curve Conveyor, Left-Hand GKF 45°-750-550 IR700 RA1390 The Transnorm belt curve conveyor is in good condition (used) and is fully functional. It is equipped with a SEW brand gear motor. Supports are not included in the scope of delivery but are available as an option on request. Belt curves are frequently used in intralogistics for internal transportation of unit loads and have become indispensable in modern distribution centers. Transnorm belt curves are renowned for their performance and reliability. Thanks to a low-strain drive across the entire belt width, they are designed for prolonged operating times. Conical drums and a specially developed belt guidance system ensure maximum running smoothness. Rjdpsk Aa T Hofx Af Aot The images shown depict the conveyor system in its installed condition in a logistics center. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying length (center radius, NL): 766 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 700 mm Conveying angle: 45° Support legs: optionally available Conveying speed (V m/s): 0.03–1.05 m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz, v380-500, kW 0.11 / 0.55 / S1 Belt: double-layer, green, smooth Year of manufacture: 2001 Optional extras: Supports Side guides (single-sided or double-sided) All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional consultation, please do not hesitate to contact us directly by phone or email. We are happy to support you with the planning and implementation of your projects. We look forward to hearing from you. Kind regards, Your Team at Dr. Sonntag GmbH & Co. KG Your partner and specialist for intralogistics

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2017, veikimo valandos: 19 995 h, keliamoji galia: 1 300 kg, kėlimo aukštis: 5 500 mm, laisvas kėlimas: 1 895 mm, kuro tipas: elektrinis, stiebo tipas: triplex, statybinis aukštis: 2 400 mm, šakių laikiklio plotis: 980 mm, šakių ilgis: 1 150 mm, tuščias svoris: 3 076 kg, bendras ilgis: 1 800 mm, pavaros tipas: Elektro, statybos plotis: 1 070 mm, Elektrinis 3 ratų krautuvas Krovos centras: 500 mm Šakių plotis: 100 mm Šakių storis: 35 mm ISO klasė: ISO 2 klasė = 1 000 - 2 500 kg Stiebo tipas: Triplex Techninė būklė: gera Priekinės padangos tipas: superelastinės Priekinės padangos dydis: 18x7-8 Priekinės padangos būklė: 60 - 80% Galinės padangos tipas: superelastinės Galinės padangos dydis: 140/55-9 Galinės padangos būklė: 60 - 80% Baterijos voltai: 48V Baterijos talpa: 500Ah Baterijos gamintojas: Northbatt Baterijos gamybos metai: 2025 Rsdpfxsw Hicnj Af Ast Baterijos būklė: nauja Šoninis poslinkis, 4-asis vožtuvas, priekiniai darbo žibintai,

Būklė: naujas, Gamybos metai: 2026, kuro tipas: dyzelinas, galia: 440 kW (598,23 AG), variklių gamintojas: Scania DC16, Naudojimo paskirtis: statyba Generatoriaus galia: 550 kVA Krovinių skyriaus matmenys: 500 x 190 x 235 cm Rodpjwtwlwjfx Af Aet CE ženklinimas: taip Išmetamųjų teršalų lygis: Stage V / Tier IV final Vandens bako talpa: 310 l Gamybos šalis: IT Daugiau informacijos teiraukitės Ronald van der Laar, Kenny Bongers, Tijmen Pesselse arba Arjen van Dijk. = Papildomos parinktys ir priedai = - Akumuliatorius - Valdymo pultas - Plieninis stogas - Cisterninis sunkvežimis

Būklė: naudotas, Gamybos metai: 2014, veikimo valandos: 7 700 h, Įranga: visų varančiųjų ratų pavara,

Būklė: naudotas, Gamybos metai: 1986, Funkcionalumas: visiškai funkcionalus, šildymo galia: 1 500 kW (2 039,43 AG), nominali šilumos galia: 1 500 kW (2 039,43 AG), darbinis slėgis: 6 juosta, slėgis: 6 juosta, Įranga: dokumentacija / vadovas, karštas vanduo, We offer this used MAWERA FU 1300 RA heating system, year of manufacture 1986. Including control cabinet, flue gas cleaning system and induced draught fan. Type: FU 1300 RA Year of manufacture: 1986 Nominal thermal output: 1,500 kW Permissible operating overpressure: 6 bar Permissible flow temperature: 120°C Price: €3,000 We also offer a used MAWERA FU 550 RIA heating system, year of manufacture 2001. Type: FU 550 RIA Year of manufacture: 2001 Nominal thermal output: 550 kW Permissible operating overpressure: 6 bar The FU 550 RIA has already been dismantled. Price: €3,000 Rsdpfx Aeykmd Ajf Ast In addition, we offer the sliding floor discharge system including cylinder with double trough screw conveyor and hydraulic unit. Bunker: 10x4 m Price: €3,000 Furthermore, we have an Eder pressure maintenance and degassing system for sale. Fully functional, rubber membranes were replaced a few years ago. Price: €2,000 For system dimensions, please refer to the images. Parts of the system are still in operation and can be inspected at any time. Planned dismantling date: mid-May 2026. If you have any questions or require further information, please feel free to send us a message or give us a call.

Būklė: naudotas, null I: 950, P: 550, A: 600 (mm). Produktas: plieninės sukraunamos dėžės. Tipas: tvirta konstrukcija. Vykdymas: su keturiomis uždaromis sienelėmis. Pardavimo vienetas: po vieną. Medžiaga: plienas. Sienelės: profiliuotas plieninis lakštas. Dugnas: profiliuotas plieninis lakštas. Euronomas (mm): nėra. Spalva: įvairios. Rjdpfsx Aht Uox Af Aet

Būklė: naudotas, Gamybos metai: 2022, Used machine Year of manufacture: 2022 Features and technical data: - Professional sliding table panel saw in heavy-duty design - With scoring unit; adjustable from the outside with separate drive motor - Sliding table made from anodised aluminium with a proven, permanently smooth-running ball contact system on hardened guide rails (10-year manufacturer's warranty from date of initial commissioning) - Saw rip fence with round bar guide; foldable for large panels, with quick-release and integrated fine adjustment - Table extension - Table widening - With integrated on/off switch on the sliding table - Motorised height and tilt adjustment of the saw unit, digital display for tilt angle - Programmed control for saw blade height, tilt, and rip fence position - Swiveling control panel at eye level - Quality made in Italy - Cutting length: 3200 mm - Cutting height 90°/45° with scorer max.: 136.5/97 mm - Crosscut width left of the saw blade max.: 3260 mm - Cutting width with rip fence: 1270 mm - Saw blade tilt: 90 - 45 ° - Saw blade diameter with scorer max.: 400 mm - Scoring saw blade: 120 mm Rsdpfx Afex Hbruj Aot - Main saw blade speed: 3500/5000 rpm - Scoring saw blade speed: 9200 rpm - Sliding table dimensions: 360 x 142 x 3200 mm - Extraction port: 120 + 80 mm - Main motor power: 7.0 kW, 400 V - Scoring unit motor power: 0.55 kW Dimensions: approx. 3200 x 950 mm Weight: approx. 745 kg Availability: short-term Location: Röllbach

Būklė: geras (naudotas), Gamybos metai: 1956, Sunkioji tekinimo staklės, tekinimo staklės, tekinimo suolas, priekinės ir galinės ašies tekinimo staklės - Gamintojas: Meuser, priekinės ir galinės ašies tekinimo staklės tipas M3A - Tekinimo ilgis: 1400 mm - Tekinimo Ø virš lovos: 550 mm Rodpfx Ajh Uuzyjf Ajt - Tekinimo Ø be lovos: 800 mm - Tekinimo Ø virš suporto: 300 mm - Špindelio skylė: Ø 58 mm - Špindelio apsisukimai: 15 - 810 aps./min - 3 žandikaulių griebtuvas: Röhm Ø 250 mm - Diskinė plokštuma: 500 mm - Priedai: įskaitant įrankių laikiklį/įrankius, žr. nuotraukas - Galinės atramos tvirtinimas: MK5 - Matmenys: 2770/1160/H1310 mm

Būklė: geras (naudotas), Padanga, pilnavidurė padanga, krautuvo padanga, pilnas ratas - Gamintojas: Vorwerk, pilnavidurė padanga su ratlankiu - Padangos dydis: 120 x 410/550 - Stebulo skylė: Ø 68 mm - Skylių išdėstymas: Ø110 mm x 18 mm - Kiekis: 1 vnt. turimas - Matmenys: Ø 550 x 120 mm Rjdpfjyx Svnex Af Aet - Svoris: 33 kg

Būklė: dilaminuotas dirbtuvėje (naudotas), Fully overhauled grinding machine manufactured by LŽT Kikinda, type URB 550/750/1000. Machine specifications: - Table surface: 880/1130/1500 x 300 mm - Max. grinding length: 550/750/1000 mm - Max. grinding width: 350 mm - Max. grinding wheel center height: 500 mm - Max. cross travel of table: 300 mm - Max. longitudinal travel of table at maximum speed: 570/770/1020 mm - Standard magnetic chuck size: 500/750/1000 x 300 mm - Grinding wheel: 300x50x127 mm - Grinding accuracy: 5 microns - New electrical cabinet fitted with components from ABB, Schneider - Painting in final color as per customer request Rodpfev Tah Nex Af Aet Warranty on workmanship: 6 or 12 months. Delivery time: to be agreed. For any further information, feel free to contact us.

Būklė: naudotas, Gamybos metai: 2011, Technical Details: x-axis travel: 800 mm y-axis travel: 950 mm z-axis travel: 1020 mm Control: Sinumerik 840D sl MDynamics Operate Speed: 10,000 rpm Spindle power: 26/20 kW Spindle torque: 340/262 Nm Tool holder: HSK-A 100 Tool changer: 120 (2x60) positions Pallet changer, double: 630 x 630 mm Table load capacity: 800 kg Machine weight approx.: 20 t Space requirement approx.: 3.3 x 6.15 x 3.2 m 6-axis simultaneous horizontal machining center with controlled rotary/swivel table (A/B axis) The B axis has a swivel range of 180°, which means the part can be machined overhead, allowing chips to fall freely downward. U-axis = CNC-controlled radial movement of the tool, enabling different diameters of a bore to be machined with a single tool in one operation. Double pallet changer, pallets 630 x 630 mm 6-way hydraulic feed to pallets with coupling mechanisms, rotary unions in A and B axes, Special hydraulic pump system. ICS (internal coolant supply) (10–80 bar), one clamping channel in the work area with proportional valve 10–200 bar Electromechanical tool length measurement device by GROB BLUM laser for tool monitoring Tool coding Chip conveyor 3D touch probe M&H Oil mist extraction Siemens HT8 electronic handwheel Rinsing gun Coolant flushing in the work area Air gun Oil skimmer Rjdeyzza Ispfx Af Ast Automatic door Remote diagnostics The price includes a 6th axis MAPAL Tooltronic with 2 U-axis heads: 1. LAT125-HSK100 2. LAT160-HSK100

Būklė: naujas, Gamybos metai: 2024, Swing diameter over bed: 250 mm Swing diameter over cross slide: 145 mm Turning length: 550 mm Centre height over bed: 125 mm Distance between centres: 550 mm Bed width: 135 mm Spindle bore: 26 mm Rjdpfjwlvk Aox Af Aot Speed range – stepless: 50 – 2,000 rpm Drive power: 750 W Three-jaw chuck diameter: 125 mm Tailstock quill taper: MT 2 Quill diameter: 30 mm Quill stroke: 70 mm Operating voltage: 230 V Machine weight approx.: 120 kg Space requirements approx.: 1.25 x 0.60 x 0.50 m Item no.: 88111 - Infinitely variable speed adjustment - Digital speed display - Three-jaw chuck ø 125 mm - Centre point MT 4 - Centre point MT 2 - Emergency stop button / no-voltage release - Chuck guard with safety interlock - Chip tray / splash guard - Toolbox / operating manual / CE

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2021, Šis "Felder FORMAT 4 KAPPA 550" plokščių pjūklas buvo pagamintas 2021 m. Jis turi stumdomą stalinį pjūklą, kurio pjūklo skersmuo yra 250-550 mm, o pjovimo aukštis - 202 mm 90° kampu ir 140 mm 45° kampu. Jis palaiko tris greičius: 3000, 4000 ir 5000 aps/min, jo pjovimo plotis - 1250 mm, o ilgis - 2800 mm. Mašina taip pat pasižymi "e-motion" valdymu ir teleskopiniu ribotuvu, skirtu skersiniams pjūviams iki 3200 mm. Susisiekite su mumis ir gaukite daugiau informacijos. • Pjūklo skersmuo: 250-550 mm Rodpfx Afex D Exqe Aot • Pjovimo aukštis: 202 mm (90°), 140 mm (45°) • Pjūklo greitis: 3000 / 4000 / 5000 aps/min. • Pjovimo plotis: 1250 mm • Pjovimo ilgis (stumdomojo stalo eiga): 2800 mm • Valdymas: Kappa 550 e-motion • Konsolinio stalo atraminis paviršius: 1250 x 650 mm • Teleskopinis ribotuvas skersiniams pjūviams iki 3200 mm • Kryžminio pjovimo ribotuvo pasukimo diapazonas: nuo 90° iki 45° • Galinis stalo ištraukimas už pjūklo ašies: 1200 mm • Išpjovimo tvorelė: elektroniniu būdu reguliuojama rutuliniu sraigtu, įmontuota į stalą ir apsaugota nuo dulkių