Sd 300 Tekinimo Staklės pirkti naudotą (56 226)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, veikimo valandos: 7 800 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: Puma 2600, sukimosi skersmuo virš skersinio stumduko: 630 mm, tekėjimo ilgis: 1 245 mm, tekėjimo skersmuo: 376 mm, veleno skylė: 102 mm, veleno greitis (maks.): 2 800 aps./min, ašies variklio galia: 26 W, įvesties srovės tipas: trifazis, valdiklių gamintojas: FANUC, ašies skaičius: 2, veleno veikimo valandos: 7 800 h, įrankių magazino lizdų skaičius: 12, Įranga: drožlių transporteris, For sale: turning center with sub-spindle and Y-axis. Condition: excellent. Purchased new in mid-2023, the machine is still in operation. It has clocked just under 8,000 hours and produces parts well below its technical capacity. Serviced exclusively by an authorized distributor. Adapted for work with a robot: features autodoor, communication signals available. Equipped with parts conveyor and oil mist filter. NOTE: The offer does not include the robot – sale and support with robot integration are possible based on a separate quote. TECHNICAL DATA (according to manufacturer specification): 1) Capacity Swing diameter over bed: 680 mm Swing diameter over cross slide: 630 mm Maximum turning diameter: 376 mm Recommended turning diameter: 315 mm Maximum turning length: 1245 mm Permissible weight (including chuck): In chuck: 500 kg (supported: 1000 kg) Bar diameter in spindle: 102 mm 2) Spindle Chuck: 315 mm Spindle taper: A2#11 ASA Front spindle bearing diameter: 160 mm Itedpfjx Rqkusx Agfed Spindle bore: 115 mm Chuck through-hole: 103 mm Spindle drive motor power (cont./30 min): 26/22/18.5 kW (S3 25%/S6 60%/S1 Cont.) Spindle speed range: 2–800 rpm Max spindle torque: 1123 Nm (15 min S3 15%) Power transmission: belt 3) Sub-spindle Chuck: 175 mm (optionally 210 mm) Spindle: A2#5 ASA Spindle bore: 62 mm Sub-spindle cylinder through-hole: 50 mm (H8) Sub-spindle drive motor power (cont./30 min): 7.5/5.5 kW (30 min/S1 Cont.) Sub-spindle speed range: 0–4500 rpm Max sub-spindle torque (30 min): 85 Nm Power transmission: belt 4) Travels X-axis: 260 mm Z-axis: 1350 mm Y-axis: 105 (±52.5) mm B-axis: 1350 mm C-axis 1,2: 360° (in 0.001° increments) Rapid traverse (X/Z/Y/B): 30/30/10/30 m/min C-axis rapid: 200 rpm 5) Bed and saddle Slant bed, inclination angle 30° Bed guideway width (Z): 437 mm Saddle guideway width (X,Y): 321/325 mm Sub-spindle override: 335 mm 6) Tool system Tool holders: BMT 65P Number of tools: 12 Tool dimensions: 25 x 25 mm Max drill diameter: 50/32 mm (main/sub-spindle) Driven tool power: 7.5/1.5 kW (5 min/cont.) Driven tool speed: 5000 rpm Driven tool torque: 95.5 Nm Driven tool collets (ER32): Φ3–Φ20 mm (option) Turret indexing: 1 station, 0.15 s (1.2 s full station) Max driven tool drilling diameter: φ20 mm/M20 x P2.5 7) Hydraulic system Tank capacity: 20 l Flow rate (60/50Hz): 25/20.8 l/min Pressure: 2.2 kW x 5.0 MPa 8) Coolant Tank capacity: 250 l Flow rate: 30 l/min Pressure: 0.7 kW x 0.15/0.1 MPa (60/50 Hz) 9) Machine accuracy Positioning: 0.01 mm Repeatability: 0.02 mm C-axis positioning: 0.0167° Positioning accuracy (X/Z/Y/C): ±0.002/±0.003/±0.003 mm/±0.006° For questions or further information, please send a message or contact us by phone.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2012, Bendrieji duomenys Matmenys plotis: 1270 mm Matmenys gylis: 2630 mm Matmenys aukštis: 1580 mm Staklių svoris: 2500 kg Itedpfox D Sccox Agfod Valdymo blokas Prekės ženklas: FANUC Modelis: nenurodytas Pagrindinė pavara Špindelio sukimosi greitis: 5000 aps./min. Špindelio variklio galia: 7,5 kW Ašių skaičius: 6 Šešių ašių ERGOMAT TBC-42 šveicariško tipo tekinimo staklės pagamintos 2012 m. Maksimalus ruošinio diametras – 42 mm, špindelio greitis iki 5000 aps./min. Įrengtos Fanuc 18i-TB Dual Path valdymo sistema, užtikrinančia preciziškumą ir universalumą, 8 įrankių pozicijos ir greitas padavimo judesys iki 30 m/min. Jei ieškote aukštos kokybės tekinimo sprendimo – rekomenduojame rinktis ERGOMAT TBC-42. Susisiekite su mumis dėl daugiau informacijos. Pritaikymo sritys Tekinimas

Būklė: naudotas, Gamybos metai: 2016, Swing diameter: 366 mm Turning length: 700 mm Control: Celos Mitsubishi M730U Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Itodpfxsyvvt Ss Agfsd Max. spindle speed: 4,000 rpm Drive power - main spindle: 18.5/18.5/15 kW Max. bar diameter: 80 mm Number of tool stations: 12 positions Tool turret: BMT 80 X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis travel: +/- 50 mm Tailstock taper: MT5 Operating hours: approx. 20,564 h Power-on hours: approx. 28,664 h Machine weight: approx. 4.7 t The machine has been overhauled with the following components: - Ball screws for X, Y and Z axes - New main spindle - Complete maintenance package - Newly adjusted and calibrated As such, the machine is in as-new technical condition. Two machines available. Price per unit. Technical features: - Tool turret, 12 stations, BMT 80, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis - Overhang length for driven tools: 100 mm - Scraper belt chip conveyor - Coolant system with increased pressure, 5 bar Accessories: - Coolant shower at the main spindle chuck - Compressed air blow-off system for tool cutting edges - Inline filter for coolant system - Compressed air blow-off system for tailstock center - Mechanical interface for oil mist separator, 150 mm - 4-color signal light - EtherNET I/P interface for automation Accessories, tools, and clamping devices shown are only included in the delivery scope if specified in the additional information. Changes and errors in the technical data and information as well as prior sale reserved!

Būklė: geras (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 140 mm, veleno skylė: 45 mm, plotis centre: 500 mm, Ciklinė tekinimo staklės Gamintojas: Kern Tipas: CD 282 Pagaminimo metai: 2006 Techniniai duomenys Gamintojas: Kern Tipas: CD 282 Pagaminimo metai: 2006 Valdymas: Heidenhain Atstumas tarp centrų: 500 mm Sūkių skersmuo virš lovio: 280 mm Sūkių skersmuo virš skersinio vežimėlio: 140 mm Veleno anga: 45 mm Sūkių diapazonas: 1-5000 aps./min. Variklio galia: 11,5 kW Itjdpfx Aoyvugdjgfod Matmenys: Ilgis 2,20 x Plotis 1,60 x Aukštis 1,20 m Svoris: apie 1,6 t Priedai - Heidenhain valdymo sistema su skaitmeniniu ekranu - Dulkių nusodinimo įrenginys Clean Mist, tipas CM 1400/2, 2018 m. - Didelis priedų rinkinys pagal nuotraukas

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Doosan Puma 300MC C ašis, varomieji įrankiai, C ašis 360° (0,001°) Metai: 2007 Fanuc 21iTB su Manual Guide Griebtuvas 12 colių, 315 mm Samchully Veleno skersmuo 102 mm Maks. tekinimo skersmuo 355 mm Ašių eiga: X – 250 mm Iedpfx Agsyrb Urjfotd Z – 680 mm BMT 65 galva Griebtuvas Įrankių zondas Drožlių išmetėjas, vonelė su aušinimo siurbliu Įrankių laikikliai Įrenginio dokumentacija Labai gera būklė

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 38 mm, tekinimo skersmuo virš slankiojančio stalo: 320 mm, tekėjimo ilgis: 910 mm, bendras ilgis: 700 mm, bendras plotis: 1 610 mm, bendras aukštis: 1 350 mm, veleno greitis (maks.): 1 650 aps./min, veleno greitis (min.): 65 aps./min, didžiausias metrinės sriegio skersmuo: 6 mm, metrinės sriegio eigos: 23, bendras svoris: 272 kg, trijų žandikaulių griebtuvo skersmuo: 160 mm, The HOBBY 910 G lathe, in its standard configuration, is equipped with a leadscrew and a feed shaft for threading, or for automatic longitudinal and cross feed. The 12-speed gearbox allows rapid spindle speed adjustments—without the need to change the V-belt. Thanks to its compact design and high weight, the machine ensures quiet yet highly precise operation. -Easy and quick spindle speed change via gearbox -High concentricity thanks to precision ball bearings -Powerful drive motor with high torque, spindle speed range 65 – 1650 rpm -Wide range of applications: precision mechanics, vocational training centers, education, etc. -Simple feed adjustment, smooth and precise switching -Robust machine bed with induction-hardened and ground guideways -Machine ideal for machining steel, non-ferrous metals, and plastics -Standard equipment includes a leadscrew for automatic longitudinal and cross feed -Carriage with handwheels and precision graduated scales Technical specifications: Centre distance: 910 mm Centre height: 160 mm Swing over bed: 320 mm Bed width: 160 mm Spindle bore: 38 mm Spindle mount taper: MT 5 Spindle speed (min): 65 rpm Spindle speed (max): 1650 rpm Number of spindle speeds: 12 Longitudinal feed range: 0.087 – 2.049 mm/rev Cross feed range: 0.019 – 0.444 mm/rev Metric threads: (23) 0.25 – 6 mm Itedpeyn Amnefx Agfjd Imperial threads: 4 – 120 TPI Tailstock quill travel: 75 mm Tailstock taper: MT 3 Motor power: 1.5 kW Motor power S1 100%: 1.1 kW Voltage: 230 V Dimensions (W x D x H): 1610 x 700 x 1350 mm Weight approx.: 272 kg Scope of delivery: 160 mm 3-jaw chuck Cross slide Fixed centres Change gears Four-way tool post LED work lamp Chuck guard Chip tray Leadscrew guard Operation tools Stand/base

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, CNC Lathe with 4 Guideways | Manufacturer: GURUTZPE | Model: A-1600 4G Year of manufacture: 2007 Maximum versatility for machining heavier workpieces with larger dimensions. Bedways are prismatic and precision-ground. Condition: Fully operational (normal mechanical wear commensurate with age). Operating hours (as of February 2026): approx. 26,000 h. Machine can be inspected by appointment. TECHNICAL DATA: - Distance between centers: 4,000 mm - Center height: 800 mm - Bed width: 1,350 mm - Spindle bore: 150 mm - Main spindle nose: DIN 55026, type: A15 - Quill diameter (tailstock): 220 mm - Spindle speed: 480 rpm - Workpiece weight: max. 10 t Electrical data: - Main spindle motor power S1: 39 kW - Total installed power: 54 kW - Voltage / Frequency: 400 V, 50 Hz Ijdoynuaaspfx Agfetd - Phases: 3 EQUIPMENT: - CNC control: SINUMERIK 840D pl - Electronic handwheel - Chip conveyor - CE marking - Documentation No guarantee for completeness and accuracy of technical data or equipment. Subject to prior sale.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1980, tekėjimo aukštis: 3 100 mm, tekėjimo skersmuo: 4 100 mm, priekinės plokštės skersmuo: 3 600 mm, Lenkiškos gamybos karuselinis tekinimo staklės RAFAMET tipas KCF 400. Staklės geros techninės būklės – prijungtos ir paruoštos darbui. Stalo skersmuo: 3600 mm, tekinimo skersmuo: 4100 mm, tekinimo aukštis: 3100 mm. Itsdpfxjyrz Eqe Agfsd

Gamybos metai: 1997, veikimo valandos: 54 646 h, būklė: naudotas, Traub TNA500 Isdpfoyt Slwox Agfstd SN 253 Velenas 2800 aps./min 12-ių įrankių revolveris Yra pavaromi įrankiai Galia 46 kVA

Būklė: geras (naudotas), Emco Compact 10 tekinimo staklės Itodpfeyl Rz Uex Agfjd Pagaminta Austrijoje. Staklės puikios būklės, beveik nenaudotos. Atkelia iš spaustuvės techninės priežiūros dirbtuvių. Nenaudotos gamyboje. Komplekte yra priedai.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2019, veikimo valandos: 3 450 h, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 300 mm, tekėjimo ilgis: 525 mm, tekėjimo skersmuo: 356 mm, veleno skylė: 64 mm, veleno greitis (maks.): 4 000 aps./min, Mašina puikios būklės. Pagaminimo metai: 2019. TM8i mašinos specifikacija Pjūviai ir darbo sritis Atstumas tarp centrų: 597 mm Skersmuo virš staklių lovos: 525 mm Skersmuo virš skersinio vežimo: 300 mm Didžiausias tekinimo skersmuo: 356 mm Didžiausias tekinimo ilgis: 525 mm Maksimalus strypo skersmuo: 64 mm X / Z ašių eiga: 203 / 550 mm Velenas Maksimalus veleno greitis: 4000 aps./min Itedpeyfhynsfx Agfod Maksimalus sukimo momentas (aukšta pavara): 133,83 ft·lbs prie 1000 aps./min (100,7 Nm prie 1000 aps./min) Veleno galia: 25,48 AG (19 kW) Veleno galva: A2-6 Griebtuvo skersmuo: 210 mm Revolverinė galvutė Įrankių tipas: diskinė su grioveliais Pozicijų skaičius: 12 Indeksavimo laikas (šalia esančios pozicijos): 1,3 s Indeksavimo laikas (tolimiausios pozicijos): 3,6 s Pavaros Greitos X/Z ašių pastumos: 30 m/min Matmenys Didžiausias užimamas plotas: 4336 × 3114 mm Mašinos aukštis: 2193 mm Mašinos svoris: 4030 kg Ruoinio griebtuvo matmenys 150 × 95 × 70 mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, veikimo valandos: 11 454 h, tekėjimo ilgis: 450 mm, tekėjimo skersmuo: 300 mm, veleno greitis (maks.): 5 000 aps./min, bendras svoris: 4 300 kg, Strypo skersmuo (maks.): 65 mm, Įranga: dokumentacija / vadovas, Parduodama tekinimo staklės DMG CTX GILDEMEISTER 320 V5. Staklės anksčiau buvo aptarnautos, su nauja hidrauline pompa. Tekinimo skersmuo: 300 mm Tekinimo ilgis: 450 mm X ašies eiga: 160 mm Pagrindinio veleno apsukų diapazonas: 5 000 aps./min Priešinio veleno apsukų diapazonas: 5 000 aps./min Strypo skersmuo: 65 mm Įrankio laikiklis: VDI 30 Vairuojamų įrankių stotys: 12 Vairuojamų įrankių apsukos: 5 000 aps./min X ašies greitoji eiga: 60 m/min Z ašies greitoji eiga: 45 m/min STAKLIŲ DETALĖS Valdymas: Siemens 840D ShopTurn Matmenys & Svoris Reikalinga vieta su drožlių transporteriu: 6 895 x 2 284 x 1 885 mm Staklių svoris: apie 4,3 t DARBO LAIKAS Įjungimo valandos: 59 643 h Iedoyuzq Sjpfx Agfjtd Veleno darbo valandos: 28 339 h ĮRANGA Drožlių transporteris Priešinis velenu Hainbuch 65 mm greitaeigė spaustuvė Hainbuch 42 mm greitaeigė spaustuvė Detalės imtuvas Konvejerinė juosta C ašis Vairuojami įrankiai Dokumentacija

Būklė: naujas, Gamybos metai: 2025, OTINUS PROMOTION: 0% LEASING! Don't wait for a better moment – it's now. Otinus machines with financing at no additional cost. A straightforward offer: you only pay the price of the machine. Optimize your taxes in 2026 and choose proven equipment. Contact us for details! CNC Lathe HLC-4055 with Fanuc 0i TF Control Machining range: - Max turning diameter over bed: Φ 560 mm - Max turning diameter over carriage: Φ 320 mm - Maximum turning diameter: Φ 400 mm - Maximum turning length: 548 mm - Distance from spindle center to floor: 980 mm - X-axis travel: 210 mm - Z-axis travel: 610 mm Tool turret: - Turret type: Hydraulic V12 - External tool holder size: 25x25 mm - Internal diameter: Φ 40 mm - Indexing time: Φ 0.55 s Spindle: - Drive type: Belt drive - Maximum spindle speed: 4500 rpm Itodpfx Agowdt Szsfjd - Power consumption (15 min): 11/15 kW - Torque (15 min): 140/250 Nm - Spindle nose: JISA2-6 - Spindle through-hole: Φ 76 mm - Max workpiece diameter: Φ 50 mm - Front spindle bearing diameter: Φ 100 mm - Spindle diameter: 208 mm Feed rates: - Rapid traverse X: 24 m/min - Rapid traverse Z: 30 m/min - Servo motor power X/Z: 1.8/1.8 kW Tailstock: - Quill diameter: Φ 100 mm - Center type: MT NO.4 - Quill stroke: 120 mm - Travel: 410 mm Other parameters: - Control: FANUC - Power supply: 25 kVA - Coolant tank capacity: 200 l - Machine weight: 4.5 t - Dimensions [length × width × height]: 4200×2050×1850 mm

Būklė: naudotas, Gamybos metai: 2001, Sukimosi skersmuo 340 mm Sukimosi ilgis 750 mm Valdymas SYSTEM TX 8H Veleno perėjimo skersmuo 80 mm Apskritimo skersmuo virš skersinio stalo 530 mm Apskritimo skersmuo virš lovio 665 mm Pagrindinio veleno greičių diapazonas 3.150 min/-1 Pagrindinio veleno variklio galia 22 kW Įrankių vietų skaičius 12 pozicijų. Mūsų vertinimu, įrenginys yra geros naudotos būklės, apžiūrėti galima prijungus prie elektros pagal susitarimą. Yra 2 įrenginiai. Kaina už vienetą. 1 įrenginys: - Nuotraukos 1-5 - Darbo valandos apie 55.790 h 2 įrenginys: - Nuotraukos 6-10 - Darbo valandos apie 54.347 h Techninės charakteristikos ir priedai: - Y ašis - Priedų paketas su fiksuotais ir varomais įrankių laikikliais - Drožlių transporterio sistema Priedai, darbo įrankiai ir spaustuvai, matomi nuotraukose, į pristatymo komplektą įtraukiami tik jei tai nurodyta papildomoje informacijoje. Itjdpexwdw Eefx Agfod Techniniai duomenys ir informacija gali būti keičiami, galimi netikslumai. Galimas tarpinis pardavimas!

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, Vertical Turning Lathe - Double Column / Vertical Turning Machine Make: WALDRICH SIEGEN | Year of manufacture: 2018, Commissioned: 2019 High-performance turning and milling unit with modular design for optimal adaptation to customer requirements. Fully hydrostatic guidance of all main axes ensures maximum machining performance and precision. Main components are made of high-performance cast material for optimal damping properties and high rigidity. Condition: Fully functional / Ready for operation. The machine can be inspected by appointment. Total operating hours: 65,432 h TECHNICAL DATA: Portal, clearance width: 6,000 mm Travel paths: - Cross slide horizontal (X1/X2-axis): 5,160 mm - Ram vertical (Z1/Z2-axis): 2,000 mm - Distance X1/X2 (spindle center): min. 2,100 mm - Crossrail vertical (W-axis): 1,800 mm - Measuring system horizontal (X3-axis): 7,065 mm - Measuring system vertical (Z3-axis): 2,350 mm Faceplate: - Clamping surface diameter: 5,000 mm Rotary table: - Drive power: 2 x 110 kW - Number of gear stages: 2 Slide Spindle drive: - Spindle drive power: 63 kW - Number of gear stages: 2 - Speed range, stage 1: 0 - 600 rpm - Speed range, stage 2: 0 - 3,000 rpm Ram: - Cross-section: 400 x 400 mm Electrical system: - Total connected load: approx. 361 kVA EQUIPMENT: - 2 turning and milling slides - CNC control: SINUMERIK 840D sl - External and internal coolant supply - Chip conveyor (belt filter) - Extraction and filter system, Keller Vario - Probe for workpiece measurement: Renishaw, RMP 60 - Further accessories ... No guarantee for completeness or correctness of technical details and equipment. Ijdjynbxcjpfx Agfstd Detailed technical datasheet and information about the equipment available upon request.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 90 mm, tekėjimo skersmuo: 630 mm, tekinimo skersmuo virš slankiojančio stalo: 630 mm, tekinimo skersmuo virš viršutinio vežimo: 380 mm, tekėjimo ilgis: 2 000 mm, bendras ilgis: 3 900 mm, bendras plotis: 1 420 mm, bendras aukštis: 1 590 mm, bendras svoris: 3 400 kg, ruošinio svoris (maks.): 1 500 kg, The FAT TUR 630M/2M universal lathe has been extensively refurbished and modernized by us. It features technical specifications matching the documentation of a new machine, complies with WOT acceptance standards and Polish norms, and also meets EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: Order-specific general overhaul within 3 to 3.5 months from order placement. Technical Data: - Centre distance / Turning length: 2000 mm - Swing over bed: 630 mm - Swing over cross slide: 380 mm - Spindle bore: 90 mm - Max. workpiece weight between centres: 1500 kg - Number of spindle speeds: 21 - Speed range (rpm): 18 – 1800 - Feed range (mm/rev): Longitudinal: 0.05 – 3.26 Cross: 0.25 – 1.63 - Motor power: 15 kW - Overall dimensions: Total length: 3900 mm Width: 1420 mm Isdped Ead Tjfx Agfjtd Height: 1500 mm - Total weight: 3400 kg Standard equipment: Tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and configurations - Digital Read Out for 2 axes, including display, installation and calibration - Steady rest 10–140 mm, with rollers - Steady rest 10–180 mm, with rollers - Steady rest 140–300 mm, with rollers - MULTIFIX quick-change toolpost

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 90 mm, tekėjimo skersmuo: 630 mm, tekinimo skersmuo virš slankiojančio stalo: 630 mm, tekinimo skersmuo virš viršutinio vežimo: 380 mm, tekėjimo ilgis: 3 000 mm, quill skersmuo: 90 mm, bendras ilgis: 4 900 mm, bendras plotis: 1 420 mm, bendras aukštis: 1 590 mm, sukimosi greitis (maks.): 1 800 aps./min, sukimosi greitis (min.): 18 aps./min, bendras svoris: 3 700 kg, ruošinio svoris (maks.): 1 500 kg, veleno tvirtinimas: MK 6, The FAT TUR 630M/3M universal lathe has been comprehensively rebuilt and modernized by us. It features technical specifications that correspond to the technical and operational documentation of a new machine, meets the technical inspection requirements of the WOT and Polish standards, and also complies with EU regulations. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: in stock, powered up, ready for technical inspection. Technical specifications: - Distance between centers/turning length: 3000 mm - Swing over bed: 630 mm - Swing over cross slide: 380 mm - Spindle bore diameter: 90 mm - Maximum workpiece weight between centers: 1500 kg - Number of spindle speeds: 21 - Spindle speed range (rpm): 18 - 1800 - Feed range (mm/rev): Longitudinal: 0.05 – 3.26 Cross: 0.25 – 1.63 - Motor power: 15 kW - Overall dimensions: Overall length: 4900 mm Width: 1420 mm Itjdpfx Aged Eaa Eofsd Height: 1500 mm Total weight: 3650 kg Standard equipment: tailstock, coolant pump, chuck guard, toolholder Optional equipment available at additional cost: - 3- or 4-jaw chuck, various diameters and types - Digital Read Out for 2 axes, including display, with installation and calibration - Steady rest 10-140 mm, with rollers - Steady rest 10-180 mm, with rollers - Steady rest 140-300 mm, with rollers - MULTIFIX quick-change toolpost

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, This universal lathe is thoroughly overhauled and modernized by our specialists in our workshop, based on order specifications. The machine fully meets all technical standards and parameters of a comparable new machine of this type. It will be ready for collection within a maximum of 3 to 3.5 months from the customer order date. Warranty: 12 months warranty on the modernized, overhauled machine. Technical Data: TPK 90 - Swing over bed [mm]: 930 mm - Swing over cross slide [mm]: 650 mm - Swing in gap [mm]: 1200 mm - Spindle bore diameter [mm]: 95 mm - Distance between centers [mm]: 10,000 mm - Max. workpiece weight between centers [kg]: 6,000 kg - Max. workpiece weight with 1 steady rest [kg]: 7,500 kg - Max. workpiece weight with 2 steady rests [kg]: 9,000 kg - Number of spindle speeds: 21 - Speed range [rpm]: 8–800 - Number of feeds: 80 - Feed range [mm/rev]: longitudinal: 0.1–12.8 - Feed range [mm/rev]: cross: 0.05–6.4 - Machine dimensions [mm]: Length: 12,500 mm Itjdpfx Agskh D Txsfod Width: 1,800 mm Height: 1,800 mm - Motor power [kW]: 22 - Machine weight [kg]: 11,000 kg

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 95 mm, tekėjimo skersmuo: 930 mm, tekinimo skersmuo virš slankiojančio stalo: 930 mm, tekinimo skersmuo virš viršutinio vežimo: 650 mm, tekėjimo ilgis: 6 000 mm, bendras ilgis: 8 500 mm, bendras plotis: 1 800 mm, bendras aukštis: 1 800 mm, veleno greitis (maks.): 800 aps./min, veleno greitis (min.): 8 aps./min, bendras svoris: 8 000 kg, veleno tvirtinimas: MK 6, The universal lathe PORĘBA TPK-90/6M has been extensively rebuilt and modernized by us. It features technical specifications that match those stated in the technical and operational documentation of a new machine, meets the technical acceptance conditions of the WOT and Polish standards, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: Delivery time from 3 to 3.5 months, general overhaul according to customer order. Technical data: Iedpfx Aeiwa Iaogfjtd - Distance between centers / turning length: 6000 mm - Swing over bed: 930 mm - Swing over cross slide: 650 mm - Swing in gap: 1200 mm - Spindle bore: 95 mm - Maximum workpiece weight between centers: 6,000 kg - Maximum workpiece weight between centers + 1 steady rest: 7,500 kg - Maximum workpiece weight between centers + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 – 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Overall dimensions: - Total length: 8500 mm - Width: 1800 mm - Height: 1800 mm - Net weight: 8000 kg Standard equipment: Tailstock, coolant pump, chuck guard, toolholder. Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and models - Digital read out for 2 axes, incl. display, installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-600 mm, with rollers - MULTIFIX quick-change toolpost

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 95 mm, tekėjimo skersmuo: 930 mm, tekinimo skersmuo virš slankiojančio stalo: 930 mm, tekinimo skersmuo virš viršutinio vežimo: 650 mm, tekėjimo ilgis: 5 000 mm, bendras ilgis: 8 500 mm, bendras plotis: 1 800 mm, bendras aukštis: 1 800 mm, veleno greitis (maks.): 800 aps./min, veleno greitis (min.): 8 aps./min, bendras svoris: 8 000 kg, veleno tvirtinimas: MK 6, The universal lathe PORĘBA TPK-90/5M has been thoroughly rebuilt and modernized by us. It features technical parameters that correspond to the technical and operational documentation of a new machine, meets the technical acceptance criteria of WOT and Polish standards, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: Available from stock, under power, can be inspected at any time Technical data: - Distance between centers / Turning length: 5000 mm - Swing over bed: 930 mm Itodpfowk Iq Eex Agfod - Swing over cross slide: 650 mm - Swing in gap: 1200 mm - Spindle bore diameter: 95 mm - Maximum workpiece weight between centers: 6,000 kg - Maximum workpiece weight between centers + 1 steady rest: 7,500 kg - Maximum workpiece weight between centers + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Overall dimensions: Overall length: 7500 mm Width: 1800 mm Height: 1800 mm - Total weight: 7300 kg Standard equipment: Tailstock, coolant pump, chuck guard, tool holder Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and versions - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-600 mm, with rollers - MULTIFIX quick-change toolpost

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 120 mm, tekėjimo skersmuo: 1 550 mm, tekinimo skersmuo virš slankiojančio stalo: 1 550 mm, tekinimo skersmuo virš viršutinio vežimo: 1 220 mm, tekėjimo ilgis: 6 000 mm, bendras ilgis: 8 500 mm, bendras plotis: 1 600 mm, bendras aukštis: 1 600 mm, ruošinio svoris (maks.): 15 000 kg, veleno tvirtinimas: MK 6, The universal lathe PORĘBA TR-155B2/6M has been comprehensively rebuilt and modernized by us. It features technical parameters that correspond to the technical and operational documentation of a new machine, meets the technical acceptance conditions of WOT and Polish standards, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrics. Availability: Overhaul on order, delivery time 3.5 months from order confirmation. Technical specifications: - Distance between centers/turning length: 6,000 mm - Swing over bed: 1,550 mm - Swing over cross slide: 1,220 mm - Swing in gap: 1,880 mm - Spindle bore diameter: 120 mm - Max. workpiece weight between centers: 9,000 kg - Max. workpiece weight between centers + 1 steady rest: 12,000 kg Itodov Ab Dqopfx Agfjd - Max. workpiece weight between centers + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) - Overall dimensions: Length: 8,500 mm Width: 2,130 mm Height: 1,550 mm - Overall weight: 14,100 kg Standard equipment: Tailstock, coolant pump, chuck guard, tool holder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and models - Digital Read Out for 2 axes with display, including installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change tool post - Full-length rear safety guard - Inverter including soft-start function and potentiometer for stepless speed control

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 105 mm, tekėjimo skersmuo: 900 mm, tekinimo skersmuo virš slankiojančio stalo: 900 mm, tekinimo skersmuo virš viršutinio vežimo: 570 mm, tekėjimo ilgis: 5 000 mm, bendras ilgis: 7 500 mm, bendras plotis: 2 130 mm, bendras aukštis: 1 550 mm, veleno greitis (maks.): 630 aps./min, veleno greitis (min.): 5 aps./min, veleno tvirtinimas: MK 6, The universal lathe PORĘBA TR-90B/5M has been extensively rebuilt and modernized by us. It features technical specifications that match those found in the technical and operational documentation of a new machine, complies with the WOT technical acceptance standards and Polish norms, and also meets EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: general overhaul to order, delivery time 3.5 months from order confirmation Technical data: - Distance between centers / turning length: 5,000 mm - Swing over bed: 900 mm - Swing over cross slide: 570 mm - Swing in the gap: 1,150 mm - Spindle bore diameter: 105 mm - Maximum workpiece weight between centers: 8,000 kg - Maximum workpiece weight between centers + 1 steady rest: 10,000 kg - Maximum workpiece weight between support points + 2 steady rests: 11,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power: 27/41 kW (1st gear / 2nd gear) - Overall dimensions: Total length: 7,500 mm Width: 2,130 mm Height: 1,550 mm Total weight: 13,200 kg Iodpfx Agonnz Sxjfotd Standard equipment: tailstock, coolant pump, chuck guard, tool holder Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and types - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change toolpost

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 105 mm, tekėjimo skersmuo: 1 350 mm, tekinimo skersmuo virš slankiojančio stalo: 1 350 mm, tekinimo skersmuo virš viršutinio vežimo: 1 000 mm, bendras ilgis: 5 500 mm, bendras plotis: 2 130 mm, bendras aukštis: 1 550 mm, bendras svoris: 12 300 kg, ruošinio svoris (maks.): 11 000 kg, veleno tvirtinimas: MK 6, The PORĘBA TR-135B/4M universal lathe has been comprehensively rebuilt and modernized by us. It features technical specifications that match the technical and operational documentation of a new machine, meets the technical acceptance conditions of the WOT and Polish standards, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrics. Availability: General overhaul to order; delivery time 3.5 months from order placement. Technical data: - Centre distance / turning length: 4000 mm - Swing over bed: 1350 mm - Swing over cross slide: 1000 mm - Swing in gap: 1650 mm - Spindle bore: 105 mm - Max. workpiece weight between centers: 8,000 kg - Max. workpiece weight between centers + 1 steady rest: 10,000 kg - Max. workpiece weight between centers + 2 steady rests: 11,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Itjdpfx Aeflaxvegfjd Cross: 0.035 – 5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) - Overall dimensions: - Total length: 6500 mm - Width: 2130 mm - Height: 1550 mm - Total weight: 12300 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and versions - Digital Read Out for 2 axes, including display, installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change toolpost

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 120 mm, tekėjimo skersmuo: 1 350 mm, tekinimo skersmuo virš slankiojančio stalo: 1 350 mm, tekinimo skersmuo virš viršutinio vežimo: 1 000 mm, tekėjimo ilgis: 5 000 mm, bendras ilgis: 7 500 mm, bendras plotis: 2 130 mm, bendras aukštis: 1 550 mm, sukimosi greitis (maks.): 630 aps./min, sukimosi greitis (min.): 5 aps./min, ruošinio svoris (maks.): 11 000 kg, veleno tvirtinimas: MK 6, The PORĘBA TR-135B1/5M universal lathe has undergone a comprehensive general overhaul and has been fully modernized by us. It features technical specifications that correspond to the technical and operational documentation of a brand-new machine, meets the technical acceptance requirements of the WOT and the Polish standard, and also fulfills EU requirements (CE Declaration of Conformity). The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: in stock, powered up, ready for technical acceptance. Technical data: - Centre distance / Turning length: 5000 mm - Swing over bed: 1350 mm - Swing over carriage: 1000 mm - Swing in bridge gap: 1650 mm - Spindle bore diameter: 120 mm - Power drive for the top slide cross-feed for taper turning up to 450 mm in length, 90° scale - Maximum workpiece weight between centres: 8,000 kg - Maximum workpiece weight between centres + 1 steady rest: 10,000 kg - Maximum workpiece weight between centres + 2 steady rests: 11,000 kg - Number of spindle speeds: 21 - Speed range (RPM): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 22/41 (1st gear / 2nd gear) - Overall dimensions: - Total length: 7500 mm - Width: 2130 mm - Height: 1550 mm - Total weight: 13,200 kg Standard equipment: Tailstock, coolant pump, chuck guard, tool holder, chip trays Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and types - Digital Read Out for 2 axes, including display, with installation and calibration - Steady rest 40–400 mm, with rollers Ijdpfxova Elae Agfstd - Steady rest 400–700 mm, with rollers - Steady rest 450–900 mm, with rollers - MULTIFIX quick-change tool post

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 120 mm, tekėjimo skersmuo: 1 350 mm, tekinimo skersmuo virš slankiojančio stalo: 1 350 mm, tekinimo skersmuo virš viršutinio vežimo: 1 000 mm, bendras ilgis: 8 500 mm, bendras plotis: 2 130 mm, bendras aukštis: 1 550 mm, sukimosi greitis (maks.): 630 aps./min, sukimosi greitis (min.): 5 aps./min, ruošinio svoris (maks.): 15 000 kg, veleno tvirtinimas: MK 6, The universal lathe PORĘBA TR-135B2/6M has been comprehensively rebuilt and modernized by us. It features technical parameters that comply with the technical and operational documentation of a new machine, meets the technical approval criteria of WOT and the Polish standard, and also fulfills EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: customized general overhaul, delivery time 3.5 months from order placement Technical data: - Distance between centers/turning length: 6000 mm - Swing over bed: 1350 mm Itsdjkyt Hlspfx Agfjd - Swing over cross slide: 1000 mm - Swing in gap: 1650 mm - Spindle bore diameter: 120 mm - Motor drive for the top slide - Maximum workpiece weight between centers: 9,000 kg - Maximum workpiece weight between centers + 1 steady rest: 12,000 kg - Maximum workpiece weight between centers + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power: 27/41 kW (1st gear / 2nd gear) - Overall dimensions: Total length: 8500 mm Width: 2130 mm Height: 1550 mm - Total weight: 14,100 kg Standard equipment: tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and types - Digital readout for 2 axes, incl. display, installation, and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change toolpost