Contur pirkti naudotą (18)

Gamybos metai: 2010, Sąlyga: paruoštas naudoti (naudotas), Swing diameter over bed/cross slide/saddle: 460mm/258mm/785mm, centre distance: 1016mm, bed width: 300mm, spindle bore: 58mm, speed: 2000 rpm, leadscrew/tailstock quill diameter: 35mm/65mm, tailstock quill travel: 127mm. Machine dimensions (LxWxH): approx. 1900mm/850mm/1200mm, weight: approx. 1650kg. Documentation available. On-site inspection possible. Expected to be available from the end of May 2025. Knsdpfjwal H Aex Acuec

Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 280 mm, veleno skylė: 58 mm, tekinimo skersmuo virš slankiojančio stalo: 470 mm, centro aukštis: 235 mm, tekėjimo ilgis: 1 000 mm, plunksnos brūkšnys: 127 mm, quill skersmuo: 68 mm, bendras ilgis: 2 150 mm, bendras plotis: 810 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 20 aps./min, lovos plotis: 300 mm, bendras svoris: 1 800 kg, quillo laikiklis: MK 4, Centre height: 235 mm Centre distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20–2000 rpm Equipment includes: Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surfaces) of the cross and compound slides Manual central lubrication with a pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Control bar with 3 adjustable cams Machine lamp Fixed live centre Ksdpfecirnijx Acuenc Set of machine levelling plates

Sąlyga: naujas, WORK AREA – TURNING – - Max. Swing Diameter: 520 mm - Max. Turning Diameter: 260 mm - Max. Workpiece Length: 1,500 mm MAIN SPINDLE - Spindle Bore: 78 mm - Speed Range From: 20 rpm - Speed Range To: 2,000 rpm - Number of Gear Steps: 12 - Spindle Diameter: 78 mm LEAD AND FEED SCREW - Longitudinal Feeds (Z-axis) From: 0.05 mm/rev - Longitudinal Feeds (Z-axis) To: 0.82 mm/rev - Cross Feeds (X-axis) From: 0.02 mm/rev - Cross Feeds (X-axis) To: 0.4 mm/rev - Lead Screw Pitch: 6 mm TAILSTOCK - Quill Diameter: 68 mm - Quill Taper: MT 4 Knodpjfcqtdjfx Acuec ELECTRICAL CONNECTION DATA - Total Power Consumption: 5.5 kW DIMENSIONS / WEIGHTS - Total Weight approx.: 1,810 kg The machine is available with a center distance from 760 mm up to 2,000 mm. A machine with 1,500 mm center distance is in stock at A-6500 Landeck with the following options: - Item No. 5200 B Multifi type steel tool post head B (without tool holders) - Item No. 6405 DA3A-520-1500 ARBAH digital position display (Made in EU) for SJ-520/1500S, incl. counter, 3 scales, stand, covers, and installation - Item No. 5300 3544-250-8 3-jaw chuck BISON, steel body Ø 250 mm, Camlock D8, with hard, one-piece stepped jaws We would be pleased to provide you with a non-binding offer according to your specifications. → For technical description as well as standard and optional equipment, please refer to the PDF file.

Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 330 mm, veleno skylė: 78 mm, tekinimo skersmuo virš slankiojančio stalo: 520 mm, centro aukštis: 260 mm, tekėjimo ilgis: 1 500 mm, plunksnos brūkšnys: 127 mm, quill skersmuo: 68 mm, bendras ilgis: 2 670 mm, bendras plotis: 810 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 20 aps./min, lovos plotis: 300 mm, bendras svoris: 2 135 kg, quillo laikiklis: MK 4, Įranga: sūkių greitis be galo kintamas, Centre height: 260 mm Centre distance: 1500 mm Spindle bore: 78 mm Spindle nose according to DIN 55029 Camlock D8 Spindle speed range: 20–2000 rpm Drive power: 7.5 kW Weight approx. 2135 kg Equipment includes: - Stepless speed control - Hardened and precision-ground Z-axis guideways - Turcite coatings (on the mating surface) of the cross slide and compound slide - Manual central lubrication with a pump for the longitudinal and cross slides - Complete coolant system with rear splash guard and splash protection on the slide - Chuck guard - Control rod with 3 adjustable cams - Machine light - Fixed centre Knjdpfsctutmsx Acujc - Set of machine levelling pads

Sąlyga: naujas, WORKING RANGE - TURNING - - Max. Swing diameter: 470 mm - Max. Turning diameter: 235 mm - Max. Workpiece length: 1000 mm Kodpfx Acofcqtcjuonc BED GAP / BRIDGE - Swing diameter in bed gap: 690 mm MAIN SPINDLE - Spindle bore: 58 mm - Speed range from: 20 rpm - Speed range up to: 2000 rpm - Number of gear steps: 12 - Spindle diameter: 58 mm LEADSCREW AND FEED SHAFT - Longitudinal feed (z) from: 0.05 mm/rev - Longitudinal feed (z) up to: 0.82 mm/rev - Cross feed (x) from: 0.02 mm/rev - Cross feed (x) up to: 0.4 mm/rev TAILSTOCK - Quill taper: MT 4 ELECTRICAL CONNECTION DATA - Total power consumption: 5.5 kW DIMENSIONS / WEIGHT - Space requirement - left/right: 1900 mm - Space requirement - front/back: 810 mm - Overall height: 1220 mm - Approx. total weight: 1800 kg The machine is available with centre distances from 760 mm to 2000 mm. This is a stock machine offered at a special price (New price including these options: 28,962.- €) The machine is in stock at 6500 Landeck / TIROL and can be inspected under power. We will be happy to send you a non-binding offer tailored to your required specifications. --> For a detailed description as well as standard and special equipment, please refer to the PDF file. This stock machine is equipped as follows: Including the following standard accessories, among others: - Triple-support precision spindle with SKF (FAG) bearings - Mechanical spindle brake - Complete electrical equipment - Coolant system with rear splash guard and splash protection at the carriage - Chuck guard - Control rod with 3 adjustable cams - Fixed centre - Covered leadscrew - Set of machine leveling plates - 24 V machine lamp - Operating instructions with inspection protocol - CE declaration of conformity Including special accessories, among others: Item No. 5200 B Toolpost head B, Multifix type (without tool holders) Item No. 6405 DA3A-470-1000 Digital position indicator ARBAH (Made in EU) 1 for SJ-470/1000S, including counter, 3 scales, stand, covers and installation Item No. 5300 3544-250-6 3-jaw chuck BISON, steel body Ø 250 mm, Camlock D-6, self-centering, bore Ø 76 mm, each with one set of one-piece turning and boring jaws

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 420 mm, Y ašies eiga: 220 mm, Z ašies eigos atstumas: 380 mm, veleno greitis (maks.): 2 600 aps./min, veleno greitis (min.): 65 aps./min, plunksnos brūkšnys: 100 mm, bendras aukštis: 1 800 mm, bendras plotis: 1 500 mm, bendras ilgis: 1 200 mm, stalo plotis: 390 mm, stalo ilgis: 840 mm, ruošinio svoris (maks.): 200 kg, atstumas nuo stalo iki veleno centro: 470 mm, Įranga: dokumentacija / vadovas, Table surface (tilting table): 390 x 840 mm Max. workpiece weight: 200 kg Travel X: 420 mm Travel Y: 220 mm Travel Z: 380 mm Kodpfx Asu Nytzocuonc Quill travel Z1: 100 mm Spindle speed range: 65 - 2,600 rpm Number of gearbox steps: 12 Drive power: 2.2 kW Tool taper: SK 40 (DIN 2080) Weight approx.: 1,200 kg Including comprehensive standard accessories, among others: Work area enclosure with front doors 3-axis digital display Pneumatic tool clamping system for vertical spindle with SK-40 (DIN 2080) Double-monitored spindle guard 3 conventional handwheels Complete electrical equipment for 400 V, 50 Hz three-phase current Ball screw drives for X, Y and Z axes Vertical milling head Fixed angle table, 840 x 390 mm clamping surface Swiveling device for vertical milling head LED machine light Protective bellows for vertical and horizontal guideways Automatic central lubrication for the axes and ball screws Coolant system with pump Set (4 pcs.) of mounting elements

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 200 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 800 mm, greitas poslinkis X ašimi: 36 m/min, greitas poslinkis Y ašis: 36 m/min, greitasis eiga Z ašyje: 36 m/min, valdiklių gamintojas: Siemens, valdiklio modelis: 828D + Shopmill, bendras aukštis: 2 826 mm, bendras ilgis: 2 900 mm, bendras plotis: 2 239 mm, stalo plotis: 600 mm, stalo ilgis: 1 300 mm, stalo apkrova: 1 400 kg, sukimosi greitis (min.): 100 aps./min, sukimosi greitis (maks.): 10 000 aps./min, bendras svoris: 6 200 kg, aušinimo skysčio tiekimas: 25 juosta, atstumas nuo stalo centro iki veleno galo: 910 mm, veleno nosis: SK 40, įrankių magazino lizdų skaičius: 30, įrankio ilgis: 300 mm, įrankio skersmuo: 76 mm, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Travels X/Y/Z: 1200/600/600 mm Maximum spindle speed: 10,000 rpm Drive power AC (S6-40%/S1-100%): 18/12 kW Tool holder: SK 40 Rapid traverse X/Y/Z: 36/36/36 m/min Included features, among others: - Robust roller guides on all axes - Spindle cooling system (oil cooling) - Fast double-arm tool changer with preselection and vertical magazine for 30 tools - Hinged belt chip conveyor - Coolant through spindle with 25 bar high-pressure pump - Air blast through spindle Knsdpfx Asu T Ir Recusc - Coolant gun - Portable electronic handwheel

Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, X ašies eiga: 850 mm, Y ašies eiga: 550 mm, Z ašies eigos atstumas: 550 mm, greitas poslinkis X ašimi: 36 m/min, greitas poslinkis Y ašis: 36 m/min, greitasis eiga Z ašyje: 36 m/min, valdiklių gamintojas: Heidenhain, valdiklio modelis: TNC-620, bendras aukštis: 2 560 mm, bendras ilgis: 2 350 mm, bendras plotis: 2 160 mm, stalo plotis: 550 mm, stalo ilgis: 1 000 mm, stalo apkrova: 800 kg, bendras svoris: 4 300 kg, veleno greitis (min.): 100 aps./min, veleno greitis (maks.): 10 000 aps./min, aušinimo skysčio tiekimas: 20 juosta, atstumas nuo stalo centro iki veleno galo: 700 mm, veleno nosis: SK 40, įrankių magazino lizdų skaičius: 30, įrankio ilgis: 300 mm, įrankio skersmuo: 76 mm, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Travels X/Y/Z: 850/550/550 mm Knsdpfx Aou T Irqocuec Maximum speed range: 10,000 rpm Drive power AC (40% duty cycle): 14 kW Vertical tool magazine for 30 tools Tool holder: SK 40 Rapid traverse X/Y/Z: 36/36/36 m/min Including features such as: Robust roller guides on all axes Spindle cooling system (oil cooling) Fast double-arm tool changer with pre-selection and vertical magazine for 30 tool positions Hinged belt chip conveyor Coolant through the spindle with 20 bar high-pressure pump Air blast through the spindle Coolant gun Portable electronic handwheel

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 600 mm, Y ašies eiga: 720 mm, Z ašies eigos atstumas: 700 mm, greitas poslinkis X ašimi: 36 m/min, greitas poslinkis Y ašis: 36 m/min, greitasis eiga Z ašyje: 36 m/min, valdiklių gamintojas: Heidenhain, valdiklio modelis: TNC-620, bendras aukštis: 3 300 mm, bendras ilgis: 3 800 mm, bendras plotis: 2 600 mm, stalo plotis: 700 mm, stalo ilgis: 1 700 mm, stalo apkrova: 1 600 kg, sukimosi greitis (min.): 100 aps./min, sukimosi greitis (maks.): 10 000 aps./min, bendras svoris: 10 000 kg, aušinimo skysčio tiekimas: 25 juosta, atstumas nuo stalo centro iki veleno galo: 850 mm, veleno nosis: SK 40, įrankių magazino lizdų skaičius: 40, įrankio ilgis: 300 mm, įrankio skersmuo: 76 mm, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Travel X/Y/Z: 1600/720/700 mm Maximum spindle speed: 10,000 rpm Drive power AC (S6-40%/S1-100%): 25 kW Tool holder: SK 40 Rapid traverse X/Y/Z: 36/36/36 m/min Ksdpfx Acou T Ildeuonc Including equipment such as: - Robust roller guides on all axes - Spindle cooling system (oil cooling) - Fast double-arm tool changer with tool pre-selection and vertical magazine for 40 tools - Hinged belt chip conveyor - Coolant through spindle with 25 bar high-pressure pump - Air blast through spindle - Coolant gun - Portable electronic handwheel

Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 280 mm, veleno skylė: 58 mm, tekinimo skersmuo virš slankiojančio stalo: 470 mm, centro aukštis: 235 mm, tekėjimo ilgis: 1 000 mm, plunksnos brūkšnys: 127 mm, quill skersmuo: 68 mm, bendras ilgis: 2 150 mm, bendras plotis: 810 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 20 aps./min, lovos plotis: 300 mm, bendras svoris: 1 800 kg, quillo laikiklis: MK 4, Įranga: sūkių greitis be galo kintamas, Centre height: 235 mm Knsdou T Hiuepfx Acuec Centre distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 7.5 kW Spindle speed range: 20–2000 rpm Equipment includes, among others: Stepless speed control Hardened and precision-ground Z-axis guideways Turcite coatings (on the counter surface) of the tool and cross slide Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Shift rod with 3 adjustable cams Machine lamp Fixed centre Set of machine mounting plates

Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 240 mm, veleno skylė: 58 mm, tekinimo skersmuo virš slankiojančio stalo: 430 mm, centro aukštis: 215 mm, tekėjimo ilgis: 760 mm, plunksnos brūkšnys: 127 mm, quill skersmuo: 58 mm, bendras ilgis: 1 885 mm, bendras plotis: 810 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 20 aps./min, lovos plotis: 300 mm, bendras svoris: 1 680 kg, quillo laikiklis: MK 4, Įranga: sūkių greitis be galo kintamas, Centre height: 215 mm Centre distance: 760 mm Kodsu T E Ehopfx Acujnc Spindle bore: 58 mm Spindle nose according to DIN 55029 Camlock D6 Motor power: 7.5 kW Spindle speed range: 20-2000 rpm Weight approx. 1680 kg Equipment includes, among others: - Infinitely variable speed control - Hardened and precision-ground Z-axis guideways - Turcite coatings (on mating surfaces) for tool and cross slides - Manual central lubrication with a pump for longitudinal and cross slides - Complete coolant system with rear splash guard and carriage splash protection - Chuck guard - Actuating bar with 3 adjustable cams - Machine lamp - Fixed centre - Set of machine levelling pads

Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 240 mm, veleno skylė: 58 mm, tekinimo skersmuo virš slankiojančio stalo: 430 mm, centro aukštis: 215 mm, tekėjimo ilgis: 760 mm, plunksnos brūkšnys: 127 mm, quill skersmuo: 58 mm, bendras ilgis: 1 885 mm, bendras plotis: 810 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 20 aps./min, lovos plotis: 300 mm, bendras svoris: 1 680 kg, quillo laikiklis: MK 4, Centre height: 215 mm Centre distance: 760 mm Spindle bore: 58 mm Spindle nose: DIN 55029 Camlock D6 Motor power: 5.5 kW Spindle speed range: 20–2000 rpm Weight approx. 1680 kg Equipment includes: - Hardened and precision-ground Z-axis guideways - Turcite coatings (on mating surfaces) of the tool and cross slides Knsdpecir Anjfx Acuoc - Manual central lubrication with a pump for the saddle and cross slide - Complete coolant system with rear splash guard and carriage splash protection - Chuck guard - Feed rod with 3 adjustable cams - Machine lamp - Fixed centre - Set of machine leveling pads

Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 330 mm, veleno skylė: 78 mm, tekinimo skersmuo virš slankiojančio stalo: 520 mm, centro aukštis: 260 mm, tekėjimo ilgis: 1 000 mm, plunksnos brūkšnys: 127 mm, quill skersmuo: 68 mm, bendras ilgis: 2 160 mm, bendras plotis: 810 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 20 aps./min, lovos plotis: 300 mm, bendras svoris: 1 810 kg, quillo laikiklis: MK 4, Įranga: sūkių greitis be galo kintamas, Centre height: 260 mm Centre distance: 1000 mm Spindle bore: 78 mm Spindle nose according to DIN 55029 Camlock D8 Spindle speed range: 20–2000 rpm Drive power: 7.5 kW Equipment includes, among others: - Infinitely variable speed control Knedpfxoh Rvxhs Acuec - Hardened and precision-ground Z-axis guideways - Turcite-coated counter surfaces on the tool and cross slides - Manual central lubrication with one pump for longitudinal and cross slide - Complete coolant system with rear splash guard and splash guard on the slide - Chuck guard - Shift bar with 3 adjustable cams - Machine lamp - Fixed centre - Set of machine leveling pads

Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 438 mm, veleno skylė: 85 mm, tekinimo skersmuo virš slankiojančio stalo: 660 mm, centro aukštis: 330 mm, tekėjimo ilgis: 1 500 mm, plunksnos brūkšnys: 165 mm, quill skersmuo: 85 mm, veleno greitis (maks.): 1 500 aps./min, veleno greitis (min.): 15 aps./min, lovos plotis: 400 mm, quillo laikiklis: MK 5, Įranga: sūkių greitis be galo kintamas, Centre height: 330 mm Centre distance: 1500 mm Spindle bore: 85 mm Spindle nose according to DIN 55029: Camlock D8 Number of gear stages: 12 Spindle speed range: 15-1500 rpm Drive power: 11 kW Weight approx. 2135 kg Knsdom E Umiepfx Acujc Equipment includes, among others: Each gear stage is continuously variable from 50% to 100% Hardened and precision-ground Z-axis guideways Turcite coatings (on the mating surface) of the tool and cross slides Manual central lubrication with a pump for the longitudinal and cross slides Complete coolant system with rear splash guard and splash protection on the carriage Chuck guard Switching rod with 3 adjustable cams Machine lamp Fixed centre Set of machine levelling plates

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 620 mm, veleno skylė: 153 mm, tekinimo skersmuo virš slankiojančio stalo: 860 mm, centro aukštis: 430 mm, tekėjimo ilgis: 3 000 mm, plunksnos brūkšnys: 250 mm, quill skersmuo: 120 mm, bendras ilgis: 5 250 mm, bendras plotis: 1 700 mm, veleno greitis (maks.): 680 aps./min, veleno greitis (min.): 8 aps./min, lovos plotis: 510 mm, bendras svoris: 6 800 kg, quillo laikiklis: MK 6, Centre height: 430 mm Knjdsm E U Ufopfx Acujc Centre distance: 3300 mm Spindle bore: 153 mm Spindle nose (DIN 55026): A2-11 Number of gearbox speeds: 12 Spindle speed range: 8–680 rpm Drive power: 22 kW Weight approx.: 6,800 kg Equipment includes: Rapid traverse on X and Z axes Star-delta connection Fixed steady rest with rollers (max. clamping range 300 mm) Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the carriage and cross slide Foot brake Manual central lubrication Complete coolant system with rear splash guard and splash guard on the carriage Sliding chuck guard Control rod with 4 adjustable cams Machine lamp Fixed centre Set of machine mounting plates

Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, X ašies eiga: 850 mm, Y ašies eiga: 550 mm, Z ašies eigos atstumas: 550 mm, greitas poslinkis X ašimi: 36 m/min, greitas poslinkis Y ašis: 36 m/min, greitasis eiga Z ašyje: 36 m/min, valdiklių gamintojas: Siemens, valdiklio modelis: 828D + Shopmill, bendras aukštis: 2 560 mm, bendras ilgis: 2 350 mm, bendras plotis: 2 160 mm, stalo plotis: 550 mm, stalo ilgis: 1 000 mm, stalo apkrova: 800 kg, bendras svoris: 4 300 kg, veleno greitis (min.): 100 aps./min, veleno greitis (maks.): 10 000 aps./min, aušinimo skysčio tiekimas: 20 juosta, atstumas nuo stalo centro iki veleno galo: 700 mm, veleno nosis: SK 40, įrankių magazino lizdų skaičius: 30, įrankio ilgis: 300 mm, įrankio skersmuo: 76 mm, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Travel paths X/Y/Z: 850/550/550 mm Maximum spindle speed: 10,000 rpm Drive power AC (40%): 13.5 kW (Siemens) Vertical tool magazine for 30 tools Tool holder: SK 40 Rapid traverse X/Y/Z: 36/36/36 m/min Includes equipment such as: Preparation for 4th & 5th axis Robust roller guides on all axes Spindle cooling system (oil cooling) Fast double-arm changer with preselection and vertical magazine for 30 tool positions Hinged belt chip conveyor Kjdpfxsdkh Tij Acujnc Coolant through the spindle with 20 bar high-pressure pump Air through the spindle Coolant gun Mobile electronic handwheel On request, we can offer this machine including a suitable rotary table for the 4th & 5th axis. Please mention this in your inquiry!

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 480 mm, Z ašies eigos atstumas: 310 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 40 aps./min, plunksnos brūkšnys: 120 mm, bendras aukštis: 1 820 mm, bendras plotis: 1 780 mm, bendras ilgis: 1 400 mm, stalo plotis: 500 mm, stalo ilgis: 900 mm, ruošinio svoris (maks.): 190 kg, atstumas nuo stalo iki veleno centro: 390 mm, Įranga: dokumentacija / vadovas, Table surface (tilting table): 900 x 500 mm Maximum workpiece weight: 190 kg Travel X: 600 mm Travel Y: 450 mm Travel Z: 380 mm Quill stroke Z1: 120 mm Spindle speed range: 40 - 2000 rpm Number of gear steps: 18 Drive power: 3.75 kW Tool taper: SK 40 (DIN 69871A) Weight approx.: 1,560 kg Including comprehensive standard accessories, such as: Work area enclosure 3-axis digital readout CONTUR Knsdpfxjhu Rwfs Acuoc Hydraulic tool clamping system for vertical spindle, tool holder SK 40, DIN 69871A, pull stud DIN 69872, including hydraulic unit Monitored spindle guard 3 conventional handwheels Complete electrical equipment for 400 V, 50 Hz three-phase current Ball screw drives for X, Y, and Z axes Vertical milling head Fixed tilting table 900 x 500 mm clamping surface Swivel device for vertical milling head LED machine lamp Protective bellows for vertical and horizontal guideways Automatic central lubrication for the axes and ball screw drives Coolant system with pump Set of 4 mounting elements Including tool holder package consisting of: 1 x ER40 collet chuck 7 x collets (Ø 6, 8, 10, 12, 16, 20, 25 mm)

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 130 kg, plotis centre: 600 mm, šlifavimo disko skersmuo: 450 mm, bendras plotis: 2 110 mm, bendras ilgis: 3 120 mm, bendras aukštis: 1 435 mm, šlifavimo skersmuo: 350 mm, plunksnos brūkšnys: 30 mm, šlifavimo ratuko plotis: 50 mm, šlifavimo veleno greitis: 2 000 aps./min, bendras svoris: 3 100 kg, Max. grinding diameter: Ø350 mm Max. workpiece weight: 130 kg Grinding length between centers: 600 mm Grinding spindle speed: 1500 or 2000 rpm (manual belt change) Standard grinding wheel: Ø 450 x Ø127 x 50 mm Grinding wheel width: from 25 to 50 mm Z-axis travel: 750 mm X-axis travel: 265 mm Grinding spindle power: 3.7 kW Including the following standard accessories: - Coolant tank 120 liters with 0.4 kW pump (200 l/min) and magnetic separator - Hydraulic tailstock - Removable splash guard plate - Hydraulic power unit - Standard grinding wheel Ø 450 x Ø127 x 50 mm - 1 grinding wheel flange - 1 grinding wheel flange puller Kodpfxjc Tnq Is Acuonc - Dressing holder with diamond dresser at the tailstock - 2 dead centers - Dial gauge for table alignment to 0° - Machine lamp - 3 detachable lifting hooks for crane transport - Leveling bolts with mounting plates - Machine documentation Including the following special accessories: - Internal grinding attachment - Inverter (Mitsubishi) for main spindle speed control - Inverter for grinding spindle speed control with 5.5 kW motor, incl. display - 2-axis digital readout Heidenhain ND 780