Scm Si 16 pirkti naudotą (584)

Sąlyga: naujas, Robust steel and grey cast iron construction High-precision format sliding table made of anodized aluminium, with a travel distance of 2250 mm Maximum saw blade diameter of 315 mm possible, saw blade tiltable to 45° Large squaring frame (960 x 600 mm) with extendable aluminium telescopic fence up to 2660 mm Strongly ribbed cast iron surfacing tables, stress-relieved and annealed for decades of stability and flatness Helically toothed steel infeed roller for uniform material feed Three manually adjustable spindle speeds Spindle moulder with reversing (right/left rotation) Three independent industrial motors With lockable main switch, motor protection switch, emergency stop switch Surfacing table width: 410 mm Surfacing table length: 1810 mm Maximum planing depth: 4 mm Thicknessing table length: 605 mm Thicknessing table width: 410 mm Minimum working height: 3 mm Maximum working height: 230 mm Feed speed: 7 m/min Maximum material removal: 4 mm Extraction port diameter: 4 x 120 mm Cutterblock type: TERSA (3 pcs) Cutterblock diameter: 72 mm Speed: 5200 rpm Panel saw crosscutting length: 2250 mm Cutting width with parallel fence: 900 mm Max. crosscut width left of saw blade: 2310 mm Saw blade tilt: 90–45° Max. cutting height at 90°: 90 mm Max. cutting height at 45°: 63 mm Saw blade diameter: 315 mm Saw blade speed: 4000 rpm Sliding table and worktable Sliding table length: 2600 mm Spindle diameter: 30 mm Spindle speeds: 3500/7000/10000 rpm Max. cutter diameter, retractable/non-retractable: 180/210 mm Main drive motor power: 3 x 5.0 kW, 400 V, 50 Hz Machine weight approx.: 560 kg INCLUDES OPTIONS - Handwheel with gravity numerical display for thickness table positioning - Sliding table length 2600 mm - Professional fences/stops Predpjiiynnsfx Adxoc - 'TERSA' cutterblock - Spindle moulder with reversing (right/left rotation)

Sąlyga: naudotas, Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus,

Sąlyga: labai geros būklės (naudotas), Four-side planer / four-side moulding machine Compact 23 Max. working width: 230 mm Max. working height: 125 mm Max. profile cutter diameter: 180 mm Surface planing spindle: 4 kW Pedpfx Adjt Dk Rxjxerc Vertical spindle: 5.5 kW Upper horizontal spindle: 4 kW Lower horizontal spindle: 4 kW Machine dimensions: 3200 x 1400 x 1600 mm Weight: 1850 kg

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, 4-side planer with 6 spindles, reconditioned in 2025, zero operating hours after overhaul, manufacturer SCM, Superset model. This professional industrial equipment delivers high-precision wood processing and is ideal for workshops or factories seeking superior performance and long-term reliability in solid wood machining. The machine represents a modern technological solution, originally manufactured in 2003 by renowned Italian producer SCM, brought up to current standards through a thorough reconditioning with zero hours of operation since the revision. Quality and operational safety are guaranteed, similar to a new machine. Main technical specifications: - Max working width: 240 mm (adjustable from 15 mm) - Max working height: 160 mm (adjustable from 10 mm) - 6 independent processing spindles, each with its own motor and electronic brake - First lower horizontal spindle: 5.5 kW, Ø 40 mm, 8300 rpm - Right vertical spindle: 5.5 kW, Ø 40 mm, 170 mm length, 8300 rpm - Left vertical spindle: 5.5 kW, Ø 40 mm, 170 mm length, 8300 rpm - Upper horizontal spindle: 11 kW, Ø 40 mm, 170 mm length, 8300 rpm - Second upper horizontal spindle: 13.8 kW with inverter, Ø 40 mm, 170 mm length, 10,000 rpm - Second lower horizontal spindle: 5.5 kW, Ø 40 mm, 240 mm length, 8300 rpm Feed system: - Cardan shaft transmission, each unit fitted with its own feed roller and universal joint - 4 kW feed motor with electronic brake - Continuously variable feed speed with frequency inverter: 6–30 m/min - Modernized electrical control cabinet, advanced safety systems, and improved ergonomics for easy operation and maintenance. Key benefits: - High precision and versatility in cutting, planing, and profiling solid wood, regardless of complexity - High reliability due to complete overhaul and top-quality spare parts - Optimized cost compared to new machines, with no compromise on performance - 5-year leasing options available for flexible investment management Recommended applications: - Production of cladding, solid parquet, beams, battens, boards, decorative profiles, and other solid wood products Psdpfx Aew Emlwodxjrc - Carpentry workshops and plants, door/window manufacturers, furniture production, industrial finished lumber manufacturing

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008115, Darbinis plotis X ašis: 5200 mm Darbinis plotis Y ašis: 1550 mm Darbinis paviršius: su vakuuminėmis konsolėmis Pagrindinio veleno galia: 11 kW Prjdpfxsw Idd Ue Adxsc Valdomų ašių skaičius: 5 ašių Gręžimo velenų skaičius: 19 Įrankių vietų skaičius: 26

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: AB00033534, obliavimo plotis: 520 mm, obliaus veleno skersmuo: 120 mm, obtotalinė obliavimo stalų ilgis: 2 310 mm, išlyginimo tvoros aukštis: 1 200 mm, obliavimo peilių skaičius: 4, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, sukimosi greitis (maks.): 5 000 aps./min, Įranga: variklio stabdis, Main Features: - Quick-change system for opening the tables - Speed, ergonomics, and safety - Worktable adjustment via parallelogram system - Long-lasting precision Technical Data: - Usable working width: 520 mm - Total table length: 2310 mm - Cutter block diameter: 120 mm - Planer shaft speed: 5000 rpm - 4 knives, 35 mm x 3 mm x 520 mm - Aluminium fence: 1200 mm x 190 mm - Fence tilting range: 90° to -45° - Min./max. planing height: 3 / 250 mm - Thicknessing feed speed: 5–8–12–18 m/min - Extraction hood diameter, surfacing: 120 mm - Extraction hood diameter, thicknessing: 120 mm Standard Equipment and Accessories - Infeed table adjustment via parallelogram system for chip removal setting by degree scale - Simultaneous height adjustment and locking of the worktables, complete with anti-tilt device – Quick-change system for switching from surface to thickness planing (CE version) via a special support for opening the surfacing tables and an automatic pneumatic positioning system for the extraction hood, with a hydraulic system – "READY" electronic control unit including: * Thickness table adjustment * Manual, semi-automatic, and automatic modes with 99 storable work programs * Additional functions: calculator and operating hours counter – Machine table height adjustment via 4 steel lead screws – Feed with independent drive for thicknessing Prodpfjwwv Ufox Adxjc – Outfeed roller coated with rubber – Sectional pressure pads at the infeed – Planer shaft and knife holder with markings as positioning aids, with setting gauge for planer knives – Automatic star-delta start for the main motor – Motor output: 9 kW 50 Hz (11 kW 60 Hz) (S6 -40%) [S1] 7.5 kW 10 HP 50 Hz (9 kW 12 HP 60 Hz) [S6 -40%] 9 kW 12 HP 50 Hz (11 kW 15 HP 60 Hz) – Operating tools Safety/Protection – Micro safety switches for correct positioning of surfacing tables and extraction hoods – Surfacing guard (CE version) – Automatic motor brake on main motor – Thermal protection switch – 110V auxiliary circuit – Emergency stop switch – Lockable main switch – CE declaration of conformity (CE version) Consisting of: R0.20.20 Linvincibile FS 7 CE version 93.07.31 Voltage: 400V EU 93.12.01 Frequency: 50 Hz 34.02.15 “TERSA” cutter block with disposable reversible knives Complete with one set of knives 24.06.15 Tiltable auxiliary fence for thin workpieces 08.32.28 Base

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, Multi-spindle moulder with 9 spindles and SCM Control 100 PC control for all spindles Max. working width: 240 mm Min. working width: 25 mm Max. working height: 120 mm Min. working height: 10 mm Minimum workpiece length: 640 mm Feed speed: 6 - 36 m/min, variable Spindle speed: 6000/8300 rpm Spindle diameter: 40 mm Usable length of vertical spindles: 140 mm Usable length of horizontal spindles: 250 mm Axial adjustment of vertical spindles relative to worktable: 0 - 80 mm Axial adjustment of horizontal spindles to the right guide: 0 - 45 mm Predpfsg Umrmox Adxjc Min. and max. diameter of profile tools: 100 - 220 mm Min. and max. diameter of tools on the planing spindle: 120 - 140 mm Profile capacity of the second lower horizontal spindle with tool Ø 200 mm = 15 mm Feed motor power: 5.5 kW Feed roller diameter: 140 mm Infeed table length: 2,500 mm Quick adjustment of infeed table and guide: 10 mm Extraction capacity: 7,500 m³/h Compressed air supply: 6 – 10 bar Weight: 6,000 kg Dimensions L x W x H = 6300 x 1620 x 1655 mm Spindle arrangement: Lower horizontal spindle: Motor power: 11.0 kW Spindle speed: 6,000 rpm Right vertical spindle: Motor power: 7.5 kW Spindle speed: 8,300 rpm Left vertical spindle: Motor power: 7.5 kW Spindle speed: 8,300 rpm 2nd right vertical spindle: Motor power: 7.5 kW Spindle speed: 8,300 rpm 2nd left vertical spindle: Motor power: 7.5 kW Spindle speed: 8,300 rpm Upper horizontal spindle: Motor power: 11.0 kW Spindle speed: 8,300 rpm 2nd lower horizontal spindle: Motor power: 12.0 kW Spindle speed: 8,300 rpm 2nd upper horizontal spindle: Motor power: 11.0 kW Spindle speed: 8,300 rpm 3rd lower horizontal spindle: Motor power: 7.5 kW Spindle speed: 8,300 rpm SET-UP quick adjustment system Worktables with fine adjustment of all units via Control 100 PC control Axial travel of vertical spindle 80 mm for large tool diameters Pneumatically operated full safety cabin Feed system with universal joint drive Infinitely variable feed speed Motorized height adjustment of feed system and spindles with independent control Segmented pressure shoes after the upper horizontal spindles Fine adjustment of outfeed table Pneumatic device for spindle locking in working position Automatically adjustable left vertical spindle Including ZIWO CL 15 automatic loader Note on used machinery: • Technical data and prior sale subject to change. • All prices quoted are ex-site – loaded free of charge! • The machines have been cleaned and functionally tested. • All machines are purchased as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Sąlyga: dilaminuotas dirbtuvėje (naudotas), 3-AXIS DRILLING & MILLING CENTRE WITH FIXED ANGLE HEAD AND TWIN HORIZONTAL SPINDLES Brand: SCM Model: TECH Z 2 27 C Year: 2007 (Offered machine is operational, refurbished, sold without warranty) TECHNICAL SPECIFICATIONS: - Machining areas Between side stops in X: 2650 mm Electrospindle travel in X: 2903 mm Electrospindle travel in Y: 1240 mm Vertical drill bits in Y: 1018 mm - Max. panel size for double-station machining: 1180 mm - Max. panel thickness: 180 mm - X-Y axes vector speed: 54 m/min - Z axis speed: 11.5 m/min - Z axis stroke: 200 mm - Main motor power: 2.2 kW (3 hp) - Spindle rotation speed: 4,000 rpm - Spindle taper: M10 - Machine weight: approx. 2800 kg CONFIGURATION: WORKTABLE 4 support beams for suction cups, L=1000 mm for automatic round suction cups with aluminium bodies (2 per beam) 2 additional universal supports H=25 mm 4 suction cup holders for contouring VACUUM PUMP capacity = 100 m3/h Centralized extraction conveyor Automatic centralized lubrication for axes X & Y Pneumatic workpiece support system for tables L=1000 mm MILLING: HSK 63 electrospindle with increased power to 7.5 kW - Speed: 1,500/24,000 rpm, controlled by inverter - Clockwise and counter-clockwise selection via CNC - Cone (1) HSK 63 with tool holder (straight) included - Collet not included (tools excluded) Rear tool change magazine, 8 positions: R8L - Up to 8 tools Ø120 mm each - Each tool holder pocket supports up to 4.5 kg - Maximum total weight, tools & tool holders, magazine "R8L": 22 kg HORIZONTAL UNIT WITH 2 OUTPUTS for MILLING and GROOVING: - Speed: 9,000/18,000 rpm - Motor power: 3 kW (4 hp) - Milling tool (front output): max. Ø20 mm - Usable length of the milling tool (front output): 110 mm - Milling tool (rear output): max. Ø12 mm - Usable length of the milling tool (rear output): 80 mm - Saw blade Ø100 mm DRILLING: 12 independent spindles for vertical drilling (7 in X direction, 5 in Y direction) 3 independent heads, each with 2 spindles, for horizontal drilling: * 2 heads in "X" direction (64 mm pitch) Psdow E Hb Sspfx Adxjrc * 1 head in "Y" direction INTEGRATED OPERATOR GROUP for FIXED disc cutter for grooving along "X" - Disc cutter rotation speed: 4,000 rpm - Motor power: 2.2 kW - Disc cutter: max. Ø120 mm - Compressed air consumption: 150 nl/min - Extraction port: Ø160 mm PC-OFFICE (Hardware configuration) - Operating system: Windows XP - Colour CRT display 15" - Qwerty keyboard - Intel Celeron 2 GHz CPU - Hard disk 40 GB - RAM 128 MB - 3.5" floppy disk drive 1.44 MB - 52x CD-ROM drive (Machine offered is operational, refurbished, sold without warranty)

Sąlyga: labai geros būklės (naudotas), Centru de prelucrare SCM Prodpowmxkusfx Adxjc

Sąlyga: naudotas, Gamybos metai: 2007, used, top specification, including new outfeed rollers with Tersa cutterhead large planing height Make: SCM Model: S630 E- Linvincibile Year of manufacture: 2007 Machine no.: AB/184684 GS tested CE type-tested GS wood dust tested Motor power upgraded: 7.5 kW Planing width approx. 630 mm Planing height approx. 300 mm Table feed rollers: 2 adjustable pieces Segmented pressure bar Predpswqg R Dofx Adxsc Segmented infeed roller Rubber outfeed rollers: 2x new Feed speed up to 20 m/min, stepless Number of knives: 4 automatic motor brake Knife system: Tersa reversible knives Digital display for planing height electric height adjustment Extraction port 160 mm Space requirement approx. 1400 x 1000 x 1200 mm Weight approx. 1000 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Handover in as-inspected condition, without any warranty or guarantee

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007981, Taikomo krašto tipas: plonas kraštas, storas kraštas, masyvi mediena Klijavimo sistema: EVA Sujungimo frezavimas: taip Daugiafunkcis įrenginys: taip Maks. padavimo greitis: 20 m/min Maksimali plokštės storis: 60 mm Darbiniai agregatai: 7 vnt Pjdpfxow Ic Tzj Adxerc

Sąlyga: naujas, Particularly long jointer tables (2250 mm) made from a single piece allow for easy straightening of workpieces. - Work tables are made of cast iron, stress-relieved and tension-free, making them highly resistant and permanently flat. - Simultaneous opening & closing of the jointer tables with a single locking mechanism. - High-performance industrial motor. - Fixed mounted extraction hood. - Robust steel/cast iron construction. - Large jointer fence 1200 x 150 mm (standard with auxiliary fence). - Material feed with four speeds via separate motor. Pjdpocq E Uujfx Adxerc - Thicknessing table is lifted on 4 robust columns protected by dust bellows. - Helical feed roller on thickness planer. - Rubber outfeed roller at the outlet of the thickness planer. - Preparation for slot mortising unit. - Digital display for thicknessing height position (1/10 mm). - Automatic star-delta switching. Technical data: Total table length: 2250 mm Working width: 520 mm Max. depth of cut: 5 mm Thicknessing table dimensions: 850 x 520 mm Min/max. working height: 3/240 mm Feed speeds: 5/8/12/18 m/min Cutter block diameter/cutting knives: 120 mm/with 4 HSS knives Speed: 5000 rpm Self-braking motor: 400 V/50 Hz/S6 – 40% 7.0 kW Extraction port diameter: 1 x 120 mm Weight: approx. 650 kg Including options: - “Teresa” cutter block Ø 120 mm, monoblock, with 4 quick-release knives - Additional auxiliary fence for thin workpieces - Motorized height adjustment of the thicknessing table with digital display - Thicknessing table with 2 swing-away idle rollers

Sąlyga: naujas, - NEW - - Cutting line directly at the saw blade - Large-dimensioned saw assembly made of cast iron, double-mounted to the cast table – guarantees stability, precision, smooth operation, and long service life - Precision-guided format sliding carriage made of aluminium, anodised as standard - 10-year HOLZKRAFT warranty on wear of the sliding carriage guideways - Parallel fence with round bar guide and fine adjustment as standard - Large work table made of machined cast iron Prodpfx Adjvyup Ujxoc - Smooth operation and precise cuts - Standard table extension and table enlargement for easy handling of larger workpieces - Extendable aluminium telescopic fence with angle adjustment and two professional folding stops - Made in Italy TECHNICAL DATA Dimensions and Weights Net weight approx. 295 kg Dust Extraction Connection Extraction port diameter 120 mm Extraction port diameter (saw blade guard) 60 mm Setup Information Transport width 700 mm Machine body length 802 mm Machine body width/depth 615 mm Required space length 3,860 mm Required space width/depth 2,750 mm Explanation of required space: Dimensions account for maximum travel distances or usable lengths Working Area Working area length 1,000 mm Working area width/depth 2,000 mm Explanation working area: Please add the specified dimensions to the required space to obtain the recommended free installation area for the machine. Electrical Data Connection voltage 400 V Mains frequency 50 Hz Drive motor power 4.0 kW Drive motor duty cycle S 6 Drive motor duty cycle 40 % Sliding Carriage and Table Format sliding carriage length 1,600 mm Format sliding carriage width 270 mm Format sliding carriage height 124 mm Table length 1,020 mm Table width 325 mm Table height 860 mm Circular Saw Unit Cutting width with parallel fence 900 mm Max. crosscut width left of saw blade 1,660 mm Edging length 1,600 mm Saw blade tilt 90 - 45° Max. cutting height 90° 100 mm Max. cutting height 45° 79 mm Saw blade diameter 315 mm Saw blade speed 4,000 rpm EQUIPMENT Anodised aluminium format sliding carriage Sliding carriage handle Edging frame Saw parallel fence with round bar guide Stops: Two professional folding stops Edging shoe Eccentric clamp Table extension Table enlargement Saw blade guard cover

Sąlyga: naujas, The best-selling edge banding machine in its class with an unrivaled price-performance ratio. SCM edge banding machine for plastic edging from 0.4 - 3 mm and solid wood edging up to 5 mm, equipped with a new corner rounding unit. Edgebanding thickness for roll material: 0.4 - 3 mm Maximum edgebanding thickness for strip material: 5 mm Min. – max. workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9,000 rpm Glue pot: 0.18 kW, 0.8 kg capacity Saw cross-cut unit: 0.19 kW, 12,000 rpm Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL FEATURES Radius scraper Flat scraper Grooving unit: 1.1 kW, 12,000 rpm, groove width 4mm Buffing unit with 2 independent motors Pedpfxsc S Di Ro Adxorc Flush/radius trimming unit with tracing rollers Heated infeed fence Glue pot quick-change system ...

Sąlyga: naujas, - New - - Cutting level directly on the sliding table - Heavy-duty steel and cast iron construction - Precision-guided aluminum sliding table, standard anodized - Large support table extension mounted on a telescopic arm, longitudinally adjustable - Extendable aluminum telescopic fence, angle-adjustable with professional stop flaps - Parallel fence with quick release and fine adjustment - Large worktable made of machined cast iron remains perfectly flat over time - Standard table extension and table widening enable easy handling of larger workpieces - Smooth running and precise cuts - Equipped with a powerful three-phase motor - The large-dimensioned saw unit made of cast iron is doubly mounted to the cast table and guarantees stability, precision, smooth operation and long service life - Maximum cutting height is achieved even with scoring unit installed Made in Italy Equipment Details: Double trunnion saw unit - Large dimensions, made of steel/cast iron - Close to the saw blade, supported on both sides for precision, smoothness and durability - Height and tilt adjustable up to 45° via handwheel - Maximum cutting height also achievable with scoring unit installed - Also available with a scoring saw unit Telescopic Fence - Extendable telescopic fence up to max. 2550 mm - Angle-adjustable - With professional stop flaps Aluminum Sliding Table - Time-tested ball contact system, proven thousands of times - Resistant to dust and dirt, owing to minimal contact area between balls and trapezoidal rail - 10-year Holzkraft warranty against wear on the guideways Parallel Fence with Round Bar Guidance - With fine adjustment and quick locking - Stable round bar guidance made of precision-ground steel, 45 mm diameter - Standard fold-down mechanism for cutting large workpieces Technical Data: Dimensions and Weight Weight approx. 385 kg Dust Extraction Connector Extraction port diameter 120 mm Extraction port diameter saw blade guard 60 mm Electrical Data Drive motor power 5.0 kW Supply voltage 400 V Sliding Table and Table Sliding table length 2600 mm Sliding table width 270 mm Sliding table height 124 mm Table length 840 mm Table width 560 mm Table height 900 mm Saw Unit Cutting width with parallel fence 900 mm Max. crosscut width left of saw blade 2310 mm Edging length 2600 mm Saw blade tilt 90 - 45° Prsdpfx Adsvyupzoxec Max. cutting height at 90° 90 mm Max. cutting height at 45° 63 mm (Main) saw blade diameter 315 mm (Main) saw blade speed 4000 rpm VPE 1 Scope of Delivery: Table extension and table widening Anodized aluminum sliding table Aluminum folding stops Parallel fence with round bar guidance and fine adjustment Art. No. 5504326

Sąlyga: naujas, Working width (finished dimension) 23 – 180 mm Working height (finished dimension) 6 – 105 mm Min. length of individual workpiece 300 mm Feed speed 6 – 12 m/min Motor power horizontal spindles 2 x 7.5 kW Motor power vertical spindle 1 x 7.5 kW Spindle speed 6000 rpm Pjdpeiiv Dcsfx Adxorc Spindle diameter 35 mm Clamping length vertical spindles 120 mm Clamping length horizontal spindles 190 mm Manual lubricant pump Profile capacity without axial adjustment on vertical spindle 10 mm Loose roller integrated in outfeed table Extraction diameter 4 x 120 mm Including OPTIONS - Motor-driven feed roller before the jointer with lever for quick adjustment - Front vertical pressure unit before the left vertical spindle - Infeed table length 2300 mm - Tool package consisting of 4 planing heads and one edge-jointing cutter

Sąlyga: naujas, The work table made from heavily ribbed grey cast iron and the base frame made from welded steel ensure torsional rigidity and vibration-free operation. High-quality machine at a true entry-level price. Unique in this performance class: - Format sliding table made of anodized aluminium for highest cutting precision - Cutting plane directly at the saw blade - Saw blade unit tiltable from 90 to 45 ° - Table extension with aluminium crosscut fence and adjustable end stop for panels and large workpieces - Parallel fence with round bar guidance and fine adjustment - Powerful motor - Manufactured in Europe Dimensions and Weights Weight (net) approx. 170 kg Dust Extraction Connection Extraction port diameter 120 mm Extraction port diameter, saw blade guard 60 mm Transport width 680 mm Work area 1600 mm x 2300 mm Space requirement 2613.5 mm x 2134 mm Please add the specified dimensions to the space requirement to determine the recommended free installation area for the machine. The dimensions take into account maximum travelling distances or usable lengths. Electrical Data Connection voltage 400 V Drive motor 1.8 kW Phase(s) 3 Ph Duty type drive motor S6 Current type AC Duty cycle drive motor 40% Mains frequency 50 Hz Sliding Table and Table Format sliding table 1140 mm x 200 mm x 70 mm Table 1024 mm x 224 mm x 900 mm Prjdjvxr S Rjpfx Adxsc Circular Saw Unit Cutting width with parallel fence 700 mm Max. cutting height 90° 67 mm Max. crosscut width left of saw blade 1200 mm Max. cutting height 45° 40 mm Edging length 1200 mm Saw blade diameter 250 mm Saw blade tilt 90 - 45° Saw blade speed 3900 min⁻¹ Scope of Delivery Table extension Anodized aluminium format sliding table Parallel fence with round bar guidance and fine adjustment Aluminium folding stop Eccentric clamp Item no. 5504113

Sąlyga: naujas, Adjustment of the infeed worktable via parallelogram system Chip removal indication using degree scale Simultaneous height adjustment and locking of the worktables, complete with anti-tilt device Quick-change system for switching between surfacing and thicknessing operations (CE version) featuring a special support for opening the surfacing tables and an automatic pneumatic positioning system for the extraction hood, hydraulically assisted "READY" electronic control includes: – Thickness table adjustment – Manual, semi-automatic and automatic modes with 99 storable working programs – Additional features: calculator and operating hours counter Automatic star-delta start for main motor Machine table height adjustment via 4 steel threaded spindles Rubber-coated outfeed feed roller Replaceable feed rollers Segmented pressure shoes at infeed Planer cutterblock and setting gauge for planer knives Micro safety switches for correct positioning of the surfacing tables and extraction hoods Surfacing guard (CE version) Automatic motor brake on main motor Thermal protection switch Emergency stop switch Lockable main switch CE declaration of conformity Technical Data: Usable working width [mm]: 520 Total table length [mm]: 2310 Cutterblock diameter [mm]: 120 Motor power [kW]: 9.0, 50 Hz, 400 V Cutterblock speed [rpm]: 5000 4 knives [mm]: 35 x 3 x 520 Aluminum surfacing fence [mm]: 1200 x 190 Surfacing fence tilting range: from 90° to -45° Min./max. Planing height [mm]: 3 / 250 Thicknessing feed speed [m/min]: 5-8-12-18 Extraction hood diameter for surfacing [mm]: 120 Extraction hood diameter for thicknessing [mm]: 120 Including options: - "TERSA" cutterblock with disposable reversible knives - Tiltable auxiliary fence for thin workpieces Predpfed Akyzox Adxoc

Sąlyga: naujas, - NEW - Brand: Holzkraft Model: FS 41 elite S Tersa Digital Digital version with motorized thicknessing table adjustment - The planer knife system allows for blade changes in seconds and ensures exceptionally quiet operation - Extra-long surfacing tables (2200 mm) made from a single piece for easy straightening of workpieces - Work tables are made of cast iron, annealed and stress-relieved for high durability and permanent flatness - Simultaneous table opening - Rearward, simultaneous opening of surfacing tables for short setup times - Powerful industrial motor - Fixed-mounted extraction hood - Robust steel/cast iron construction - Large surfacing fence (standard with auxiliary fence) - Material feed with two speeds via separate motor Technical data: Total table length: 2200 mm Working width: 410 mm Max. chip removal: 5 mm Thicknessing: Thicknessing table dimensions: 775x410 mm Min/max working height: 3/240 mm Feed speeds: 6/12 m/min Cutterblock diameter/knives: 95 mm / 4 pieces Predpfevwgc Uex Adxsc Speed: 5000 rpm Motor: 400 V / 50 Hz / S6 - 40% 5.0 kW (6.6 HP) Extraction port diameter: 1 x 120 mm Weight: 450 kg Item no.: 550 3441 Location: 97447 Gerolzhofen - free loaded -

Sąlyga: naujas, Work Table Dimensions mm 640 x 1000 Usable Working Width mm 630 Max. (Min.) Workpiece Thickness mm 300 (3.5) Pedjdccukepfx Adxerc Min. Workpiece Length mm 260 Min. Workpiece Width mm 10 Max. Material Removal per Pass mm 8 Cutterhead Speed rpm 4500 Cutting Tools 4-knife cutterblock (35 x 3 x 640 mm) Feed Speed m/min 4 - 20 variable Main Motor Power kW (HP) 7 (9.5) Extraction Port Diameter mm 150 Equipment: Motorized table elevation with 2 speeds and micrometric fine adjustment Electronic digital display for working height, precise to tenths Infinitely variable feed speed from 4 to 20 m/min, electronically controlled via inverter Machine table height adjustable via 4 steel spindle screws 1st ribbed infeed roller made of steel Two upper rubber-coated feed rollers in the outfeed Interchangeable feed rollers – one machine meets all needs: perfect finishing via quick and easy roller exchange, allowing the feed system to be adapted to specific requirements. Two-component roller – ensures perfect results even with varying material thicknesses. Consistent feed guarantees top quality, even when processing different thicknesses simultaneously. Workpiece edges remain undamaged even if not perfectly aligned – excellent results even with minimal stock removal. Manual star-delta starter Protective lamellas at infeed and outfeed Emergency stop switch at the rear of the machine Micro-safety switch on the guard cover Lockable main switch Thermal overload protection 110V auxiliary circuit Automatic motor brake CE declaration of conformity

Sąlyga: naujas, - NEW - - Equipped with TERSA cutterhead for lightning-fast planer knife changes - The TERSA planer knife system ensures particularly quiet operation - Helically serrated steel feed roller for consistent and uniform wood feed - Extra-long one-piece jointer tables facilitate effortless surfacing of workpieces - Large jointer fence remains in position when opening the tables - Jointer tables open to the rear - The heavy machine weight guarantees maximum precision and smooth operation - Powerful industrial motor - Robust steel/cast iron construction - Work tables made from annealed cast iron, stress-relieved for maximum durability and permanent flatness - Table lips for quiet operation Equipment Details TERSA Planer Cutterhead - No more knife adjustment or screwing - Planer knife change in seconds - Self-locking mechanism - Exceptionally quiet - Perfect planing results Predsvwgaaepfx Adxsc Extraction Hose Connection - Extraction ports for surfacing and thicknessing point in the same direction - Hose connection from only one side - No hose required to run around the machine Drive - Heavy-duty chain drive - Drive wheels made of steel - Solid cast iron bearing support Planing Unit - Heavy-duty anti-kickback fingers prevent workpiece kickback - TERSA cutterhead with three knives ensures an optimal planed finish Material Feed - Helically serrated steel feed rollers for consistent and uniform material feed without impressions - Multiple teeth engage simultaneously for powerful feed - Maintenance-free compared to rubber feed rollers Technical Data: Length approx. 1,725 mm Width/depth approx. 880 mm Weight approx. 270 kg Maximum jointing depth: 4 mm Extraction port diameter thicknesser: 2 x 120 mm Minimum working height thicknesser: 3 mm Maximum working height thicknesser: 230 mm Maximum thicknessing depth: 4 mm Motor output: 4 kW Voltage: 400 V Frequency: 50 Hz Cutterhead type: TERSA Number of knives: 3 pcs. Speed: 5,200 rpm Maximum planing width: 300 mm Feed speed: 7 m/min Art. No. 5503031 Location: 97447 Gerolzhofen - free loaded -

Sąlyga: naujas, – New – Description: TERSA quick-change system for lightning-fast planer knife replacement Four-knife cutterblock for top-quality planing results Smooth operation thanks to precision unit and heavy cast-iron construction Long surfacing tables for precise planing Sturdy surfacing tables made from ribbed, milled, and stress-relieved cast iron—resistant to deformation and permanently flat Large, stable aluminum planer fence with round-bar guide (1200 x 150 mm), easy to adjust and tiltable up to 45° Supplied as standard with auxiliary fence Powerful 5.0 kW industrial motor Robust steel/cast-iron construction Prjdpfx Aevwf Hrodxjc Optionally retrofittable mortising unit Dimensions (Product Length) approx. 2250mm Dimensions (Product Width/Depth) approx. 1370mm Net Weight approx. 465kg

Sąlyga: naujas, - New - Description: - For sawing, milling, surface planing, thickness planing, and optionally mortising - Work tables made from heavily ribbed cast iron and the machine base made from welded steel ensure torsional rigidity and vibration-free operation - Unique in this performance class: smooth-running, anodised aluminium sliding table with ball contact system - Tiltable saw blade from 90° - 45° - Table extension with degree scale and aluminium crosscut fence for angle cuts on panels and large workpieces - Planer unit with TERSA quick-change system with three planer knives - Helically toothed steel infeed roller for consistent workpiece feed during thickness planing - Overhead milling safety guard for profiling, standard with fine adjustment - Milling unit with two speeds - Driven by three independent motors - Quality Made in Italy Technical Specifications: Dimensions and Weights Weight (net) approx. 245 kg Surface Planer Surface table width: 300 mm Surface table length: 1200 mm Angle adjustment saw/planer fence: 90/45° Max. planing depth: 3 mm Extraction Connector Extraction port diameter: 4 x 120 mm Extraction port diameter for saw blade guard: 60 mm Installation Information Required space length: 2460 mm Required space width/depth: 2155 mm Note on required space: Dimensions account for maximum traverse paths or usable lengths. Thickness Planer Thickness table length: 450 mm Thickness table width: 300 mm Min. working height: 3 mm Max. working height: 200 mm Max. thicknessing depth: 3 mm Electrical Data Connection voltage: 400 V Network frequency: 50 Hz Duty rating drive motor: S6 Duty cycle drive motor: 40 % Drive motor power: 3 x 1.8 kW Sliding Table and Table Sliding table length: 1140 mm Sliding table width: 201 mm Sliding table height: 70 mm Table length: 1024 mm Table width: 224 mm Table height: 900 mm Spindle Moulder Spindle tilt: 0° Spindle shaft diameter: 30 mm Usable spindle length: 75 mm Prodpfxovwf Ens Adxsc Spindle speeds: 5,000 – 7,500 rpm Max. Cutter Diameter Max. tool diameter: 160 mm Max. retractable tool diameter: 180 mm Max. tenoning cutter diameter: 275 mm Planer Cutter Block Planer cutter block type: TERSA Planer cutter block diameter: 62 mm Number of knives: 3 pcs Circular Saw Unit Ripping length: 1200 mm Cutting width with parallel fence: 540 mm Max. cross-cut width left of saw blade: 1200 mm Saw blade tilt: 90 - 45° Max. cutting height at 90°: 67 mm Max. cutting height at 45°: 40 mm Max. saw blade projection 90°: 75 mm Max. saw blade projection 45°: 60 mm Feed Feed speed: 6 m/min Scope of Delivery: - Tersa quick-change planer cutter block - Anodised aluminium sliding table - Multifunctional fence for rip and surface planing operations - Table extension with crosscut fence and fence jaw - Eccentric clamp arm Article no.: 5500030

Sąlyga: naujas, - New - Description: - Premium equipment for high productivity in a compact footprint! - Intuitive operation with the eye-S control system and large 10" touchscreen: HMI Maestro Active Edge. Graphical display of all machining units and their operating status, graphic simulation of processes, control of all machining units, temperature regulation of the glue pot, assistant functions for setting up the machine according to the machining program, error diagnosis for quick resolution of basic faults, statistics of machining parameters, USB port, prepared for network connection, prepared for Industry 4.0 with API REST data transfer protocol. - Excellent accessibility to the working units thanks to the large hood, which ensures protection and noise reduction - Monoblock steel construction guarantees high stability and rigidity - Automatic positioning of units when changing panel thickness - Automatic feeding of strip edging with edge magazine (me 35 t s): Solid wood strips are automatically loaded and synchronized with the panel feed - Panel feed by chain conveyor with rubber sliding shoes - Extendable workpiece support - Adjustment of the infeed fence via spacer plates Technical Data: Dimensions and Weights Length: approx. 3,314 mm Height: approx. 1,300 mm Width/Depth: approx. 1,085 mm Weight: approx. 545 kg Podpfx Adsvwfmlexsrc Flush Radius Milling Unit Flush radius milling unit motor power: 2 x 0.35 kW Flush radius milling unit spindle speed: 12,000 rpm Flush radius milling unit cutter diameter (carbide tipped): 55.3 mm Dust extraction port diameter: 2 x 60 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Glue Unit Glue pot power: 0.25 kW Glue pot dust extraction port: 60 mm Glue pot operating temperature: 190 °C Glue pot capacity: 0.8 kg Pneumatic Connection Operating pressure: 6.5 bar Air consumption: 470 l/min Feed Feed motor power: 0.55 kW Feed speed: 7 m/min Edging Edging thickness, roll material: 0.4 – 3.0 mm Edging thickness, strip material: 0.5 – 5.0 mm Pre-milling Unit Pre-milling unit motor power: 3 kW Pre-milling unit diamond cutter diameter: 80 mm Pre-milling unit material removal: 0.5 / 1 / 1.5 / 2 mm Pre-milling unit cutter speed: 7,200 rpm Pre-milling unit cutter height: 56 mm Pre-milling unit dust extraction port diameter: 2 x 80 mm Scraper Units Radius scraper: 2 mm Buffing Unit Buffing unit motor power: 2 x 0.14 kW Buffing unit speed: 2,800 rpm Workpiece Workpiece thickness: 8 – 50 mm Minimum workpiece width: 110 mm Minimum workpiece length: 120 mm Item no. 5507235

Sąlyga: naujas, Exhibition machine Technical Data: Working width (machine table) [mm]: 520 Total table length [mm]: 2750 Front table length [mm]: 1550 Rear table length [mm]: 1200 Cutter block diameter [mm]: 120 Cutter block speed [rpm]: 5000 4 knives [mm]: 35x3x520 Aluminium fence [mm]: 1200x190 Fence tilting range: from 90° to -45° Table height from floor [mm]: 845 Extraction hood diameter [mm]: 120 Maximum chip thickness [mm]: 8 Controls/Functions - Manual adjustment of the front table - Chip thickness indication via scale Safety/Protection - Cutter guard with parallelogram adjustment below the working line (CE version) - "Boomerang" cutter guard (versions with electronic safety devices) - No possible insertion work (CE version) - Lockable main switch - Thermal protection switch - 110V auxiliary control circuit - Automatic motor brake (CE version) - Emergency stop button - CE Declaration of Conformity (CE version) Accessories - Cutter block and knife holder with markings as positioning aid, complete with setting gauge for planer knives - Service tool set - Motor with direct drive: (S1): 4 kW 5.5 HP 50Hz (4.8kW 6.6HP 60Hz) (S6 -40%): 5kW 7 HP 50 Hz (6 kW 8HP 60Hz) 109999 Version according to Safety Regulations No. 1   R11163 nova f 520 CE version   930731 Voltage 400 EU   931201 Frequency 50 Hz   Pedpfxovwf Amj Adxsrc 555014 P1 version - CE and electrical safety devices Motor power 7kW 50 Hz with automatic star-delta switch   570127 Additional folding fence for processing thin parts 570135 TERSA cutter block with reversible knives, complete with one set of knives 083250 Base   109993 MACHINE LANGUAGE: German