Scm Si 16 pirkti naudotą (616)

Būklė: labai geros būklės (naudotas), Wide Belt Sander for Calibration and Fine Finishing Manufacturer: SCM Model: RCS 1st Unit: Calibrating Roller, Steel 2nd Unit: Combination Unit (Roller 60 Sh, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable Dodpfxjxqggcs Ah Hoci 2 emergency stops Table extension with 2 rollers, front and rear Sanding pad inserts covered with new graphite cloth Including nearly new sanding belts All documentation included Note – Used Machines: • Technical data and prior sale subject to change. • Prices quoted are ex location – loaded free on truck! • The machine has been cleaned and tested for functionality. • All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Būklė: labai geros būklės (naudotas), Wide Belt Sander for Calibration and Fine Sanding Working width: 1100 mm Min./max. workpiece height: 3 - 120 mm Feed motor power: 0.8 kW Abrasive belt speed: 18 m/sec Abrasive belt dimensions: 1115 x 2620 mm Feed speed: 4.5 / 9 m/min Extraction connection: 3 x 160 mm Compressed air connection: 6 bar 1st Unit: Sanding roller rubber-coated, 90 Shore Motor power: 11 kW 2nd Unit: Combination unit Sanding roller, rubber-coated, 60 Shore Sanding pad, fixed Motor power: 11 kW 3rd Unit: Cleaning brush Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Outfeed table extension Dimensions (approx.) L x W x H = 2291 x 1784 x 2350 mm Weight (approx.): 3000 kg Note for used machines: Dcedpfx Astwzyfoh Hoi • Technical data subject to error and prior sale. • Listed prices are ex-works, loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are free to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to enquiries including your address and telephone number!)

Būklė: naujas, Wide belt sanding machine for calibration and fine sanding Working width mm: 1,100 Min./Max. working height mm: 4 / 170 Abrasive belt width mm: 1,115 Abrasive belt length mm: 2,150 Geared motor kW: 2.2 Feed speed m/min: variable Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning blower, unit 1 Oscillating belt cleaning blower, unit 2 Oscillating belt cleaning blower, unit 3 10” touch screen control panel "eye-S" 1st unit: steel roller 2nd unit: rubber-coated calibrating roller 85SH 3rd unit: combination unit with pneumatically segmented sanding pad / rubber-coated sanding roller 35SH Motor power 1st unit kW: 18.5 Motor power 2nd & 3rd unit kW: 18.5 Version "B" for RRCS with: Pneumatic activation and deactivation, 1st unit Pneumatic activation and deactivation, 2nd unit Pneumatic activation and deactivation, 3rd unit “MESAR” elastic segmented sanding pad Pneumatic activation and deactivation of sanding pad unit Electronic adjustment of working height Dodpfx Asitvkuoh Hsci SPECIAL PRICE! AVAILABLE IMMEDIATELY!

Būklė: naujas, Technical Data: Working width mm: 1,350 Min./max. working height mm: 4 - 170 Abrasive belt width/length mm: 1,370/2,620 Main motor power kW: 18.5 with inverter Feed speed variable m/min: 3.5 - 18 Working Units: 1st Unit: "RA" angled-ribbed contact roller, Sh 86, diameter 160 mm 2nd Unit: Combo: Rubber-coated sanding roller, diameter 160 mm, 45 Sh Elastic electronic segmented sanding shoe “MESAR” with 24 segments Version C: - Elastic electronic segmented sanding shoe “MESAR” complete with: - Pneumatic cylinder (On/Off) for automatic engagement/disengagement of the sanding roller/sanding shoe unit - Sector activation via electronic control, synchronizing engagement with the feed speed and adjusting the number of active segments depending on the workpiece geometry, enabling selection of more or fewer sectors to the left and right of the workpiece. - Versions 135: Dcjdehtuvropfx Ah Hoi “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece scanning bar at infeed Additional Equipment: Roller table infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with 4 kW electric fan (5.5 HP) integrated into the machine frame Oscillating blow-off device 2nd unit Touch screen 10.4” display with ‘eye S’ software integration ATTENTION: IMAGES ARE SAMPLE PICTURES OF A SIMILAR SD70!

Būklė: naujas, DMC SD 90 RCS 135 C-Plus version Technical Specifications Useful working width: 1350 mm Min./max. working height (with fixed table): 4 – 200 mm Abrasive belt dimensions: 1,370 x 2,620 mm Feed speed: 3.5–18 m/min Working Units: - “MESAR 46” elastic electronic segmented sanding pad with 46 sectors (30 mm), complete with B/46 workpiece sensing bar at infeed • 1st position: “RA” diagonally ribbed steel contact roller D=250 mm • 2nd position: COMBI unit with rubber-coated sanding roller D=175 mm, 65 Sh - Floating pressure shoe in 1st position, pneumatically adjustable - Two grooved rubber-coated pressure rollers in 2nd and 3rd positions - Oscillating air jet cleaning device for 1st and 2nd unit - Workpiece cleaning unit with rotating air nozzles Power: • 1st unit motor: 18.5 kW • 2nd motor with inverter: 15 kW Table: - Fixed table, working height 900 mm - Roller table at infeed for long workpieces - Roller table at outfeed for long workpieces - Perforated table and conveyor belt 50 Sh - Vacuum table with 4 kW electric fan integrated in the machine frame - Stepless conveyor belt feed from 3.5–18 m/min (gear motor 0.75 kW) Control: - Electronic programming unit "Pro-Sand" - Touch-screen with 10.4" display Dcsdpfxod E Ixzj Ah Hoi - Door with inspection window on setup side for machines with two working units - LED interior lighting Note for used machines: - Technical data subject to errors and prior sale. - Prices quoted are ex-works, loaded free on truck. - The machines have been cleaned and function tested. - All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines at our site. - Special agreements are valid only if made in writing. (We will respond to inquiries only if you provide your address and telephone number!)

Būklė: naujas, Tilting Spindle Moulder Simple and practical machining operations thanks to the ergonomic arrangement of controls on the front of the machine Digital display for height and tilt position of the spindle Spindle speed display Spindle rotation reversible (clockwise/anticlockwise) 8 speeds Spindle diameter: 30 mm Spindle clamping length: 125 mm Max. tool diameter under table: 240 x 80 mm Extraction port diameter: 2 x 120 mm INCLUDES OPTIONS: 57.02.63 "LL" version for profiling work with 2 table extensions 57.03.30 Motorised height and angle adjustment of the working unit with digital displays 57.01.56 Three-phase motor 7.0 kW 50Hz with star-delta switch Dcsdpjcuwptefx Ah Hsi 57.00.76 Fence with handwheel adjustment - Fence with stepless adjustment via handwheels easily accessible from the front: – Adjustment of the entire fence relative to the tool – Adjustment of the front ruler to change chip removal – Mechanical digital displays – Wooden fence jaws and connector bars Dimensions (L x W x H): 2500 x 855 x 900 mm Weight: approx. 550 kg Note on used machines: • Errors in technical details and prior sale reserved. • Stated prices are ex-location – free loading! • The machines have been cleaned and function-tested. • All machines are sold as inspected, without any warranty whatsoever. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only answer enquiries that include your address and telephone number!)

Būklė: naudotas, Gamybos metai: 2011, AXES Working area X-Y-Z axes * mm: 3050-1300-180 Workpiece length in pendulum operation mm: 1390 Stroke X-Y-Z axes mm: 3460-1735-250 Max. traverse speed of X-Y axes m/min: 60 WORK TABLE Number of workpiece supports and vacuum cups: 6 / 2 standard type Standard end stops / Position: 1 / rear Vacuum pump m³/h: 90/108 DRILLING UNIT Vertical spindles Std/Quantity/Speed rpm: 12 (8X-5Y) / 4000 Horizontal spindles Std/Quantity/Speed rpm: 6 (4X-2Y) / 4000 Integrated groove/sawing unit in X Ømm/rpm: 120 / 6000 Motor power kW (hp): 2.2 (3) ELECTROSPINDLE Motor power Std./Opt. (S6) kW (hp): 7.5 (10) / 11 (15) Max. speed rpm: 24,000 Traveling tool changer on the aggregate holder in X: 4 positions, pneumatic INSTALLATION Installed power KVA: 23÷28.5 Compressed air requirement Nl/min: 450 Extraction air requirement m³/h: 1900+1900 (3400) Required extraction air speed m/sec: 30 Extraction connection diameter mm: 150+150 (200) Machine weight kg: 3000 * X: Distance between stops – Y: Cutter center as reference point; Z: Workpiece passage GENERAL FEATURES CNC-controlled drilling and milling center in C-frame design and worktable with adjustable workpiece supports and vacuum cups, designed for: - Vertical drilling on the panel surface - Horizontal drilling on all four panel sides - Grooving with disc cutter in the X direction - General milling operations Self-supporting structure and worktable Structure made of welded steel construction with control cabinet integrated in the machine frame. Available in two different lengths and with standard workpiece supports or TV-compatible aggregate holder. Box construction made of cold-rolled steel with internal reinforcement ribs, protective devices, consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit, and an SCM electrospindle with HSK 63 F quick-change tool system. Travel paths of the portal and the aggregate carrier Movement in X, Y, and Z axes is achieved on linear prismatic ball-bearing guides using preloaded drives. X-axis drive (moving column) via a preloaded, backlash-free helical rack and pinion system. Movement of the aggregate carrier in Y and Z directions via preloaded systems. Positioning of the working units and machine function control via AC brushless servomotors and digital drives. CNC CONTROL The control unit consists of a numerical controller for the milling and drilling machines, and a connected personal computer with graphical user interface "XILOG PLUS". PC-office system: Windows XP - 17" color LCD monitor - QWERTY keyboard - Swiveling control panel - Machine software: Xilog Plus Dedpfxjyymz Ue Ah Hjci Xilog Plus features Programming - Parametric, graphic and ISO programming - Import of DXF and ASCII files - Straight or circular interpolation in three axes, linear in space, or spiral in the selected plane - Supported programming assistants for graphics and syntax in drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Option for workpiece zero-point offset to perform drilling on inclined or curved panel sides - Full compatibility with CAD/CAM Routocam (SCM) and AlphaCam Integrated additional functions - Calculator for direct transfer of computed data - …

Būklė: naudotas, Gamybos metai: 2011, Naudojamas darbinis plotis: 520 mm Storio stalo matmenys: 520 x 900 mm Didžiausias darbinis aukštis: 300 mm Mažiausias darbinis aukštis: 3,5 mm Mažiausias ruošinio ilgis: 220 mm Didžiausias nuėmimo gylis: 8 mm Peilių veleno skersmuo (peilių skaičius): 120 mm (4 vnt.) Peilių veleno apsukos: 4500 aps./min Padavimo greitis: 5-8-12-18 m/min Variklio galia: 7 kW Nusiurbimo angos skersmuo: 150 mm Nusiurbimo tūris: 1300 m³/h Svoris: apie 680 kg Matmenys: 1150 x 1100 x 1250 mm Dcodpfx Aezimbdjh Hsi Sandėliavimo vieta: Garbsen

Būklė: naudotas, Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, Platusis juostinis šlifuoklis SCM Sandya 10 SCM 1100 R+R+RT Specifikacija: • Būklė – naudotas, po kompleksinės apžiūros • Gamintojas – SCM • Modelis – Sandya 10 • Darbinis plotis – 1100 mm • Maksimalus darbinis aukštis – 160 mm • 4 šlifavimo agregatai iš eilės: - kalibruojantis plieninis velenas – 160 mm skersmens - kietos gumos velenas – 160 mm skersmens - kombinuotas agregatas (guminis velenas + sekcijinė batelio tipo šlifavimo galvutė su papildomos prispaudimo funkcija) - dulkių nuėmimo šepetys • Pagrindiniai varikliai – 18,5 ir 12/15 kW galingumo • 2 darbiniai greičiai (antrajame variklyje) • Transporterio greitis reguliuojamas tolygiai • Elektroninis šlifuojamo elemento storio indikatorius • Optinis svyravimas • 2-ojo ir 3-iojo agregatų nupūtimo funkcija • Galimybė kiekvieną agregatą nuleisti/pakelti atskirai • Šlifuojamo elemento storio matuoklis • Stalas paruoštas vakuumo siurbliui (siurblys į komplektą neįeina) • Šlifavimo juostos matmenys – 2150 x 1115 mm • Dulkių ištraukimo jungtys: 4 x 155 mm ir 4 x 120 mm • Svoris apie 1800 kg • Gamybos metai – 1995 • Bendrieji matmenys 215 x 170 x 210 cm (ilgis x plotis x aukštis) Papildoma informacija: • Mašina yra geros techninės būklės, paruošta tiesioginiam naudojimui • Nuotraukose pavaizduota faktinė parduodamo daikto būklė • Galima įjungti ir patikrinti įrenginį vietoje • Nemokamas mokymas dirbti su mašina (įmonės būstinėje) • Aukcione nurodyta kaina nurodyta be PVM ir transporto išlaidų Dcsdpfx Ahozcy I Eo Hji Finansavimas ir transportas: • Organizuojame transportavimą su MDD autoparku, kurjerių įmonėmis ar išoriniais vežėjais • Teikiame finansavimo galimybes – lizingas arba lizingo paskola

Būklė: naudotas, Gamybos metai: 2013, bendras aukštis: 2 240 mm, bendras ilgis: 5 240 mm, bendras plotis: 2 400 mm, Tuščioji masė: 2700 kg - Pagaminimo metai: 2013 m. - Dokumentacija: yra - CE žymėjimas: yra - CE sertifikatas: nėra - Serijos numeris: AA1/017355 - Frezavimo velenų skaičius [vnt.]: 1 - Frezavimo velenas Nr. 1: - Valdomų ašių skaičius [vnt.]: 3 - Maksimalus veleno sūkių skaičius [aps./min.]: 24 000 - Pagrindinio variklio galia [kW]: 9,5 - Frezavimo stalo tipas: balkinis stalas - Gręžimo įrankiai: yra - Horizontalūs gręžimo velenai [vnt.]: 6 - Vertikalūs gręžimo velenai [vnt.]: 12 - Pjovimo įrenginys: yra - Sistema/programinė įranga: SCM Maestro - Darbinis plotas X [mm]: 3050 - Darbinis plotas Y [mm]: 1250 - Z ašies darbinis plotas [mm]: 1810 - Y ašies maksimalus eiga [mm]: 1550 - Įtampa [V]: 400 - Srovės suvartojimas [A]: 31 - Transportavimo matmenys: 5240 mm x 2400 mm x 2244 mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 2700 kg - Transportavimo pakuočių skaičius [vnt.]: 1 Finansinė informacija PVM: nurodyta kaina yra be PVM Dcodewnii Repfx Ah Hei PVM / diferencinis apmokestinimas: įmonėms PVM galima atskaityti Pristatymas ir senos įrangos atpirkimas galimi bet kuriuo metu, visoms pramoninėms prekėms Glenn Smeets

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, working width 220 mm working height 120 mm 4 heads spindle diameter 40 mm variable feed speed control star-delta start head adjustment in two axes electric adjustment of pressure beam spring-loaded feed roller clamps spindle speed 6000 rpm Dcsdpfoyxlqxsx Ah Hoi

Būklė: naudotas, Gamybos metai: 2011, Base Machine M800 X5 TV 1 WORKING AREA X: 5,020mm Y: 1,830mm Z: 675mm Clearance Height: 300mm (starting from 50mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic design made from thick-walled steel. It is reinforced with welded-in parts across the entire machine bed, providing extreme stability. The table design, with a large base, is the key to ensuring lasting precision and stability. The machine layout allows users to maintain an optimal workflow while requiring minimal floor space. The movable gantry beam is built from a solid monoblock. It is positioned along the X-axis on prismatic, ground guides using recirculating ball carriages. On this mobile unit carrier, the working unit is also mounted on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axis movements take place on prism linear guides with large cross-sections and recirculating ball shoes with large contact areas, ensuring optimal sliding even at maximum speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large-diameter recirculating ball screws guarantee accurate positioning of the working unit along the movable gantry (Y and Z axes). Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality actuators and brushless motors. Maximum axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min Dcsdpfxjxy Tmns Ah Hji · Z-axis = 30 m/min Safety Device with Bumper and Light Curtain 1 Bumpers with sensors are installed around the movable stand, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the access restrictions of floor mat systems. It prevents unwanted interruptions of the machining cycle and gives greater freedom of movement around the worktable. CE Certification for the Safety System 1 Safety protection fence 1 Protective fencing at the sides and rear Automatic Central Lubrication controlled by CNC 1 Lubrication of the X, Y, and Z axes is managed by CNC control at regular intervals, eliminating manual intervention at the machine. Central Extraction Connection 1 All individual extraction ports of the processing units are combined into a central extraction nozzle. Various slide gates inside the nozzle are controlled by the NC unit, reducing the required extraction air flow. Chip Conveyor 1 Maxi - 5-axis Electrospindle 11 kW HSK-63 "Prisma K 1" 5-axis electrospindle with 11 kW output at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Left/right rotation Liquid cooling Tool interface: HSK 63F 18 kW Inverter provides stepless, even power delivery Max. rotation: B-axis = 200° (±100°) C-axis = 650° Thanks to non-orthogonal axes, it is possible to perform complex horizontal positioning within a small working area. This enables the machining of complex geometries without collision risk.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Pagaminimo metai: 2013 Frezavimo galva Darbo zona X: 3000 Darbo zona Y: 900 Darbo zona Z: 50 Atskiri agregatai: 1 Vertikali gręžtuvas: 12 Horizontali gręžtuvas X: 4 Horizontali gręžtuvas Y: 2 Griovelių pjūklas: Taip Djdow Npyqspfx Ah Heci Stacionarus įrenginys: Taip Tvirtinimo sistema: Spaustuvai Apsauga: šviesos užtvara Valdymas ir programinė įranga SCM XILOG Minimali užimama vieta: 3920x1170x2150

Būklė: naudotas, Gamybos metai: 1996, Darbo plotis: 520 mm Obliavimo velenas: Tersa Peilių skaičius: 4 Obliavimo stalo ilgis: 2300 mm Obliavimo tvorelės kampo reguliavimas: taip Obliavimo stalų pakėlimas: pneumatinis Maksimali storapjūvio aukščio pravaža: 250 mm Storio stalo aukščio reguliavimas: elektrinis Obliavimo storio rodmuo: skaitmeninis Padavimo greitis: 5 / 8 / 12 / 19 m/min Įtraukimo volas: plienas Ištraukimo volas: guma Spaudimo sija: segmentinė Stalo volai: ne Variklio galia: 5,5 kW Variklio stabdis: taip, automatinis Nusiurbimo jungtis: 120 mm Dcodpfx Ajy A Hh Toh Hji Staklių ilgis: 2300 mm Staklių plotis: 1100 mm Svoris: 980 kg

Būklė: naudotas, Gamybos metai: 1992, Darbinis plotis: 520 mm Obliavimo aukštis: 250 mm Obliavimo velenas: juostiniai peiliai Peilių skaičius: 4 Aukščio reguliavimas: elektrinis Obliavimo storio rodmuo: skalė Padavimo greitis: 2 greičiai Įtraukimo volas: plienas Ištraukimo volas: plienas Dsdpfx Aeyt E Raoh Hsci Stalo volai: nėra Variklio galia: 5,5 kW Ištraukimo prijungimas: 140 mm Staklių ilgis: 1200 mm Staklių plotis: 1400 mm Svoris: apie 900 kg

Būklė: naudotas, Techniniai duomenys: Veleno skersmuo: 30 mm Veleno aukštis: 130 mm Apsisukimai: 3000/6000/8000/10000 aps./min. Rankinis veleno aukščio reguliavimas Veleno fiksavimas Darbo stalo matmenys: 1800x650 mm Reguliuojamos liniuotės rankos Dedpfjzd Eufjx Ah Hsci Variklio galia: 4 kW Maitinimas: 400 V Bendri matmenys: Ilgis: 650 mm Plotis: 1080 mm Aukštis: 1300 mm

Būklė: naudotas, Techniniai duomenys: Vikšro plotis: 220 mm Maksimalus pjovimo aukštis: 120 mm Maksimalus pjūklo disko skersmuo: 350 mm Sklandus padavimo reguliavimas Automatinė tepimo sistema Atgalinio smūgio apsauga Vartytuvas Ištraukimo antgalis: 180 mm Saugos jungiklis Maitinimas: 380 V Pagrindinio variklio galia: 18,5 kW Bendri matmenys: Dcjdpfx Ahozd En Ej Hji Ilgis: 1700 mm Plotis: 1600 mm Aukštis: 1250 mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, working area 2700x1250mm table size: 2700x1250 mm Z-axis travel: 160 mm rotary axis: C spindle motor power: 8.5 kW spindle speed: 24,000 rpm tool change magazine (auxiliary): 8 tools main tool magazine: 10 tools saw aggregate on X and Y axes vertical drills in X-axis: 8 pcs Dsdpfx Aswp R Eioh Hsci vertical drills in Y-axis: 5 pcs horizontal drills in X-axis: 4 pcs horizontal drills in Y-axis: 4 pcs tool holder: HSK 63 central lubrication pump vacuum raster table edge milling unit in X-axis year of manufacture: 2011

Būklė: naudotas, Techniniai duomenys: Veleno skersmuo: 30 mm Veleno aukštis: 160 mm Pakreipiamas velenas: -10° - 45° Apsisukimai: 3000/4500/6000/8000/10000 aps./min Rankinis veleno aukščio ir kampo reguliavimas Veleno fiksatorius Darbo stalo matmenys: 760/2500x1000/1500 mm Reguliuojamos liniuotės rankenos Variklio galia: 4 kW Maitinimas: 380 V Bendri matmenys: Dcjdpfezd Ap Tox Ah Hji Ilgis: 1500 mm Plotis: 2500 mm Aukštis: 1350 mm

Būklė: naudotas, Gamybos metai: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800 / 0 x 800 Travel of X axis mm 750 Max. traverse speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles Quantity 7 (4X-4Y, one shared) Horizontal spindles (Y axis) Quantity 2 (1+1) Horizontal spindles (X axis) Quantity 1 Fixed grooving saw (direction) X Saw blade diameter mm 100 Max. saw blade thickness mm 5 Motor output kW (HP) 1.5 (2) Spindle speed rpm 3350 Saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m³/h 1200 Extraction air velocity m/sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill shank D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1+1 drill shank D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor output 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drilling unit Workpiece positioning and aggregate drive A CNC-controlled vacuum suction system clamps and positions the workpiece sequentially under the working unit during machining. X and Y axis movement is on THK guides with transmission via reinforced toothed belts. Z axis movement is pneumatic on ball-bushing guides with positioning via adjustable stops. Positioning of working units is achieved with DC technology and drives. CNC CONTROL The control was specially developed for use in drilling and milling machines. CN - 7" color display with touchscreen functionality - Alphanumeric keyboard - Self-diagnosis and operator language-specific error or fault messages Programming - Programming via CN - automatic optimization of drilling operations - Option for panel zero-point shift - Storage and import of drilling programs via USB dongle - Import of drilling programs from external CAD/CAM software Configuration - User interface in same language as instruction manuals Graphical representation of unit configuration Vacuum suction system "B-Power" Vacuum suction cup with double vacuum connector, recommended for highly porous panels (e.g. light MDF). Machine operation interface Software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; multicore processor recommended - RAM: 1GB min., 2GB recommended - Free disk space: 5GB - Graphics card: OpenGL compatible (The code includes a DVD for installation and a USB key) Xilog Maestro features Programming - parametric, graphical programming - Supported programming with graphics and syntax assistance for drilling operations - Ability to create and save machining macros Integrated additional functions - Self-diagnosis and operator-language error or fault messages - User interface in Dsdpfsvvi I Rsx Ah Hoci

Būklė: naudotas, Gamybos metai: 2018, Startech CN MAIN FEATURES FLEXIBLE AND INDIVIDUALLY CONFIGURED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP SIDE OF THE PANEL ALLOWS FOR ABSOLUTE PRECISE PROCESSING NUMERICAL CONTROL WITH 7" COLOUR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800 / 0 x 800 Stroke of X-axis mm 750 Max. traversing speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y, one shared) Horizontal spindles (along Y-axis) number 2 (1+1) Horizontal spindles (along X-axis) number 1 Fixed groove saw (direction) X Diameter of groove saw mm 100 Max. thickness of groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Groove saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m³/h 1200 Extraction air speed m/sec 20 Extraction connection diameter mm 120 GENERAL FEATURES Universal CNC drilling machine with a working table with fixed gantry and moving workpiece for performing the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving with an integrated groove saw in the 'X' direction Self-supporting structure Machine base made of steel tubular construction to provide a large base for accommodating the working table. The structure rests on 3 self-levelling feet. The electrical control cabinet is integrated into the machine base. Central Bakelite support table 'Easy Motion': - an MDF sector for through drilling, automatically retractable for horizontal drilling - an infeed roller to facilitate panel loading - a rear roller track to ease panel sliding - left and right stops - a central alignment device with manual adjustment The left and right stops must be used to drill horizontally in the 'X' direction on the two opposite panel sides. Panel positioning along the X-axis is via vacuum suction cups. Aggregates carrier This is a gantry structure made from steel tube. The main working unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - drill shank D10 mm - spindle pitch 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill bit, 1 double drilling head in Y direction (1 + 1, drill shank D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - pneumatic vertical travel per spindle 70 mm - pneumatic horizontal travel of the drilling unit Workpiece positioning and drive of the working unit A CNC-controlled vacuum cup clamps and positions the workpiece sequentially under the working unit during processing. Movement along the X and Y axes is on THK guides with motion transmission via reinforced toothed racks. Z-axis movement is pneumatic on ball-bushing guides with stop position adjustable via the unit's positioning. Working unit positioning uses advanced drive and technology. -CONTROL The control software is specifically designed for use Dcjdpfjvwbp Aex Ah Hji

Būklė: naudotas, Gamybos metai: 2011, Apdirbimo dydis X kryptimi: 2770 mm. Apdirbimo dydis Y kryptimi: 1220 mm. Apdirbimo storis (Z matmuo): 80 mm. Mašinos konstrukcija: portalo tipo staklės. Pagrindinio veleno galia: 11,0 kW. Pagrindinio veleno greitis: 1500–24000 aps./min. Vektoriškai valdomas velenas: taip. Tvirtinimo sistema: HSK 63 F. Veleno aušinimas: oro aušinimas. Ašių skaičius: 3. Įrankių keitiklis: taip, vnt. Įrankių keitimo vietų skaičius: 10 vnt. Rašomosios mašinėlės klaviatūra: taip. Pelė: taip. Programinė sistema: Xilog Plus. DXF sąsaja: taip. Galima prisijungti prie interneto: taip. CD-ROM įrenginys: taip. Stalo tipas: tinklelinis stalas. Atramų sistema: atraminiai cilindrai. Vakuuminių siurblių skaičius: 1. Vakuuminio siurblio galia: 250 m³/val. Apsauga: saugos kiliminiai takai. Dcodpfevvi Htox Ah Hoi Sandėlio vieta: Sonnefeld

Būklė: naudotas, Gamybos metai: 2004, Sandėlio vieta: Nattheim Dsdpjvvi Hysfx Ah Hoci

Būklė: naudotas, Gamybos metai: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTION TABLE – WORK CELL VERSION X400 CELL Drilling and milling made for you! The numerically controlled machining center is equipped with a comprehensive range of milling and drilling tools to meet any requirement in the processing of wood and similar materials. - Powerful drilling spindles with 8,000 rpm and proprietary technology, featuring the most robust spindle available on the market, with over 1,000 maintenance-free operating hours - Better equipped, with a wide range of configuration options via the multifunction table to optimally adapt the machine to specific requirements - Easier and more intuitive programming with the integrated Cad-Cam module MAESTRO CNC - User-friendly operation: the worktable is always accessible, the control cabinet and vacuum pump are integrated, and with the PRO SPACE configuration, there are no safety barriers Structural Frame The structural frame is composed of a particularly robust monolithic steel base, highly ribbed and extremely rigid; the exceptionally wide support surface has been specially designed to give the machine enhanced stability, ensuring lasting precision regardless of working conditions and eliminating the need for anchoring to the floor. The base provides a large and solid support for the moving gantry: the work unit is thus furnished with a balanced, stable, and resilient structure which withstands the highest loads, delivering superior performance and greater accuracy. The moving gantry is formed from a single robust component that is anchored to the base on both sides and glides on high-quality prismatic guides with recirculating ball carriages. Dual drives along the X-axis ensure maximum performance even under intensive workloads. Movement of the lower moving unit (X-axis) and the working unit along the beam of the moving unit (Y-axis) is accomplished via a helical rack and pinion drive; this provides greater tooth-to-tooth force, resulting in increased acceleration and higher speeds along both the X and Y axes. The specially designed helical gearing reduces mechanical wear and ensures quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance under dynamic loading and rapid acceleration/deceleration. The main milling unit is directly coupled to the carriage of the Z-axis, ensuring absolute finishing quality by completely eliminating vibration. Motion along each axis (X-Y-Z) is achieved using brushless motors powered by static inverters, providing: Dcedpfx Ahjvvi N Ij Hoi - Reduced processing times thanks to improved acceleration - Increased positioning accuracy with high-resolution encoders - Automatic zero-point referencing when the machine is powered on due to absolute encoders - Elimination of general maintenance associated with brushes, as the brushless system is maintenance-free Axis movement management and overall machine function control is performed via an industrial NS module with digital D

Būklė: naudotas, Gamybos metai: 1999, Sandėlio vieta: Nattheim Dedjvvi Rxopfx Ah Hjci