Scm Flex 1 pirkti naudotą (629)

Būklė: naudotas, Gamybos metai: 1994, Variklis 6 / 7,5 kW su 4 volelių padavimo įrenginiu, pastovūs padavimo greičiai. Greičių plėtiniai. Darbo stalo aukštis: 920 mm. Veleno pakreipimas: -10° +45°. Maksimalus veleno išsikišimas virš stalo: 175 mm. Veleno apsukos: 3250/6500-5000/10000 aps./min. Maksimalus įrankio skersmuo: 250 mm. Svoris: apie 950 kg. Sandėlio vieta: Nattheim. Tjdpfx Aow Enw Ioa Doa

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, mašinos/transporto priemonės numeris: 2933751040F, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 3 940 h, įėjimo įtampa: 400 V, įėjimo srovė: 17 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, ruošinio aukštis (maks.): 40 mm, briaunos storis (maks.): 3 mm, aukščio reguliavimo tipas: mechaninis, X ašies padavimo greitis: 9 m/min, pavaros tipas: pneumatinis, bendras ilgis: 2 540 mm, bendras plotis: 1 485 mm, bendras svoris: 670 kg, paskutinio kapitalinio remonto metai: 2020, Įranga: CE žymėjimas, dokumentacija / vadovas, Siūlome labai geros būklės SCM OLIMPIC K201 kraštų apdirbimo staklę, pagamintą 2005 m. Staklių komplektacija: su pneumatiniu atpjovimo įrenginiu, tiesaus pjūvio įrenginiu, kampiniu/tiesaus pjūvio frezavimo įrenginiu, kampiniu šlifavimo įrenginiu, poliravimo įrenginiu. Kaina: 4900 EUR (be PVM), atsiimant iš gamyklos Rodgau, plius transportavimo ir siuntimo išlaidos. Jei turite klausimų arba norite gauti daugiau informacijos, rašykite arba skambinkite. Tsdezmxxiepfx Aa Doa

Būklė: naujas, Gamybos metai: 2026, CASADEI Libra 35 – Wide Belt Sander, Two-Belt Version Immediately available – Ex stock 54634 Bitburg Technical Data Sanding width: 1100 mm Min. / max. working height: 4 / 170 mm Abrasive belt width: 1115 mm Abrasive belt length: 1900 mm Feed speeds: 4.5 / 9 m/min Feed motor: 0.33 / 0.55 kW Table adjustment motor power: 0.25 kW Main drive motor power: 11 kW Electrical voltage: 400 V Phase(s): 3 Ph Mains frequency: 50 Hz Length: 1650 mm Width/depth: 1820 mm Height: 1960 mm Photo shows optional equipment. Wide belt sander in two-belt version for widths up to 1100 mm, featuring a range of options suitable for cost-conscious workshops. Robust, tube-reinforced monoblock steel machine frame with high-mounted working units for maximum rigidity. User-friendly controls with clearly arranged front control panel. Motorized table height adjustment. Digital display for working height. Electronically regulated belt oscillation with reduced compressed air consumption. Automatic star-delta starting for the main motor. Natural rubber feed belt with negative profile. Feed table fitted with two rollers at the infeed and outfeed ends of the feed belt. Feed belt driven by gear motor, selectable between two speeds. Flexible steel pressure bar in front of the first unit. Rubber pressure rollers in front of and behind each working unit. Tjdpfx Ajcr S Ecsa Dja Pneumatic belt tensioning per unit, with decimal correction for grit / belt thickness. Quality – Made in Europe. RTC Version 1st unit: diagonally grooved steel roller, Ø 120 mm, with fine adjustment for calibration. 2nd unit: combination unit with fine-adjustable working height for calibration and finish sanding, featuring a rubber-coated roller (Ø 120 mm, 45 Sh) and a hard sanding shoe with graphite lining on interchangeable insert. Scope of delivery: Table height adjustment with electronic height display Belt oscillation with electronic system Rubber-coated grooved pressure roller at infeed, 1st position, with anti-return feature (C.E.) Star-delta starting for the main motors Grooved calibration steel roller Selector switch for sanding shoe positioning from control panel Accessories: – Semi-hard flat sanding shoe – Automatic belt centering Location: Ex stock Bitburg – Special price

Būklė: naujas, Gamybos metai: 2025, Dimensions and Weights Length approx. 2000 mm Width/Depth approx. 1110 mm Weight approx. 430 kg Joiner (Planing Table) Infeed table length: 1034 mm Maximum cutting depth: 5 mm Dust extraction connection Thicknesser extraction port diameter: 2 x 120 mm Thicknesser Minimum working height: 3 mm Maximum working height: 230 mm Maximum cutting depth: 5 mm Electrical Data Drive motor power: 5 kW Rated voltage: 400 V Network frequency: 50 Hz Cutterblock Type: TERSA Number of blades: 4 pcs Speed: 5,200 rpm Maximum planing width: 410 mm Feed Feed speed: 6 / 12 m/min The TERSA cutter system allows for exceptionally quiet operation. Helically grooved steel infeed roller ensures consistent and even material feed. Material feed with two selectable speeds. Digital height readout for thickness table. The 2,000 mm long jointer tables make it easy to plane large workpieces. Tables are made of cast iron, stress-relieved and annealed, ensuring stability and long-term flatness. Heavy-duty, large aluminium jointer fence with round bar guide (1200 x 160 mm). Thickness table adjustment via handwheel with numeric height display. The high machine weight delivers maximum precision and extremely smooth running. Powerful industrial-grade motor. Robust steel/cast iron construction. Equipment Details Jointer Fence Stable, large jointer fence made from aluminium (1200 x 160 mm), with precise round bar guide. Extraction Hose Connection The extraction ports for both jointer and thicknesser face the same direction during operation. This allows the extraction hose to be connected from the same side for both planing operations, requiring no hose routing around the machine. Planer Unit Helically-grooved steel infeed rollers assure a constant and uniform material feed. Heavy-duty anti-kickback fingers prevent workpiece kickback. Four-knife cutterblock provides optimal planing results. Todjhkz E Tspfx Aa Dja Chain Drive Robust chain drive design. Drive sprockets made of steel. Massive cast iron bearing block. Two Feed Speeds Standard with two feed rates, easily selectable from the operator’s panel. Material Feed Helically-grooved steel infeed rollers provide consistent, mark-free material feed. Multiple teeth engage simultaneously for powerful feed force. Wear-free compared to rubber infeed rollers. Thickness Table Adjustment Adjustment via handwheel, with numeric digital height display, accurate to 0.1 mm. Tersa Cutterblock No setting or screwing required—blade changes in seconds, self-locking, exceptionally quiet, perfect planing results. Location: Ex-stock 54634 Bitburg - immediately available - Subject to prior sale.

Būklė: naujas, Gamybos metai: 2025, FS 41 Classic Tersa – Surface & Thickness Planer with TERSA Quick-Change Knife System Features: - Equipped with TERSA cutterhead for fast, tool-free knife changes within seconds - TERSA knife system ensures particularly quiet operation - Helically grooved steel infeed roller for consistent and uniform material feed - Extra-long, one-piece surfacing tables allow for easy straightening of workpieces - Large, robust fence remains in position when opening surface tables - Surface tables open to the rear for ergonomic access - High machine weight ensures maximum precision and vibration-free operation - Powerful industrial-grade motor - Heavy-duty steel and cast iron construction Model: FS 41 Classic Tersa Article No.: 5503414 Technical Data --- Surfacing (Jointer) Specifications --- Total table length: 1800 mm Infeed table length: 920 mm Todpfx Aaecnxays Dea Table height: 870 mm Working width: 410 mm Max. depth of cut: 4 mm --- Thicknessing Specifications --- Thickness table dimensions: 605 x 420 mm Min./max. working height: 3 / 230 mm Feed speed: 7 m/min. Cutterhead diameter/knives: 72 mm / 3 pcs. Cutterhead speed: 5200 rpm Motor: 400V/50Hz/S6 40% power cycle, 5.0 kW (6.6 HP) Extraction port diameter: 2 x 120 mm Weight: 270 kg TERSA Cutterhead - No adjustment or screwing required - Knife changes in seconds - Self-locking mechanism - Exceptionally quiet operation Cutter Block - Heavy-duty anti-kickback devices prevent material kickback - Tersa 3-knife cutterhead delivers optimal planing results Material Feed - Helically grooved steel feed rollers for constant and uniform wood feed without marking the material - 13 teeth simultaneously engage the workpiece for powerful feed - Wear-free compared to rubber feed rollers Dust Extraction Connection - Both surfacing and thicknessing extraction ports are aligned in the same direction - Hose connection is accessible from one side only - No hose routing required around the machine

Būklė: naujas, Gamybos metai: 2026, Maximum equipment for professionals. Multi-function combination machine with TERSA cutterblock, mitre cutting device, and tilting spindle moulder. Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is maintained even when the scoring saw blade is installed. Scoring unit with a separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from outside. High-precision sliding table made from anodised aluminium, running on hardened and milled steel guide rails. Large outrigger (1200 x 650 mm) with support roller and extendable aluminium telescopic stop, adjustable up to 3300 mm. Saw unit tiltable from 90° to -45°. Tilting spindle moulder from 90° to -45° towards the back into the fence. Four spindle speeds. Spindle moulder with forward and reverse rotation. Quick conversion to thickness planer thanks to parallel opening surfacing tables. Two-speed feed on the thicknessing table. Helical steel infeed roller for consistent timber feed. Three independent industrial motors. With separate saw rip fence and separate jointing fence. With lockable main switch. Equipment details: Format fence Immediate control Outrigger Outrigger with angle-adjustable telescopic crosscut stop, with degree scale. Sliding table with ball-contact system Made from anodised aluminium. Guides made of hardened and ground F550S steel, 15% harder than conventional steel. Rails are riveted, not glued. Smooth-running, quiet and reliable. 10-year HOLZKRAFT warranty on wear of the hardened guideways. Tjdpfx Aocnxa Sea Doa Cast iron dual trunnion saw unit Height adjustment via dovetail guide. Extremely robust and torsion-resistant for precise cuts. Located close to the saw blade, supported on both sides. Height and tilt adjustment up to 45°. Scoring unit as standard with separate scoring motor 0.55 kW. Dual trunnion spindle moulder unit Large dimensioned, tilting dual trunnion spindle moulder unit made of cast iron. Spindle fence Heavy-duty professional design. The high-quality cast iron spindle fence comes as standard with fine adjustment. 3-position for fast repeat settings. Fine adjustment via rack-and-pinion, numeric display, and aluminium fence faces. Planer units Helical steel infeed rollers for constant and even timber feed. Massive anti-kickback devices prevent workpiece kickback. 4-knife Tersa cutterblock ensures optimal planing finish. Table lips provide quieter operation. Tersa planing cutterblock No more setting and screwing. Cutter change in seconds. Self-locking. Particularly quiet. Thicknessing table The thicknessing table is mounted on four large-dimensioned spindles, ensuring maximum stability under all working conditions. A special lifting mechanism maintains the position of the table safely even without locking. Rip fence With fine adjustment and quick clamping. Stable round bar guide made of ground steel. Repositionable aluminium scale. No dimensional gap as guide rods are overlapping. Separate surfacing fence Large professional version (1800 x 150 mm). Tiltable 0–45°. With quick adjustment. Stable round bar guide made of ground steel. Simultaneous opening. Type: No. 5500557

Būklė: naujas, Gamybos metai: 2026, LAB 300 PLUS F 16 TERSA – Universal Combination Machine with Aluminium Sliding Table and Multiple Spindle Speeds For sawing, milling, surface and thickness planing, and optional slot mortising - Torsion-resistant steel and cast iron construction - Machine table made of hardened and ground cast iron - Smooth-running anodised aluminium sliding table, with a 10-year warranty on guideways - Large squaring frame with extendable aluminium telescopic fence and flip stops - Combination saw jointing fence with 45° quick adjustment - Max. saw blade Ø 315 mm with optional scoring unit, tiltable from 90° to 45° - Helical-toothed steel feed roller for uniform wood feed during thickness planing - Four manually adjustable spindle speeds - Standard reversible spindle rotation (right/left) Tsdpfx Aecnxa Nsa Dja - Three independent motors for each working unit Scope of delivery: - Combination surface/parallel fence - Curved milling protection hood - Tersa cutterblock - Anodised aluminium sliding table - Aluminium fence jaws - Flip stops - Eccentric clamping arm Model: LAB 300 PLUS F 16 Tersa Article No.: 5500314 Technical Data ---Circular Saw--- Cutting length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90°/45°: 100/79 mm Max. cross-cut width left of saw blade: 1660 mm Cutting width at parallel fence: 800 mm Saw spindle speed: 3500 rpm Saw blade tilting: 90° - 45° ---Surface Planer--- Working width: 300 mm Planer table length: 1260 mm Cutterblock diameter / number of knives: 72 mm / 3 pcs. ---Thickness Planer--- Table size: 300 x 450 mm Min./max. working height: 3 mm / 220 mm Max. stock removal: 4 mm Feed speed: 7 m/min ---Spindle Moulder--- Usable spindle length: 100 mm Max. tool diameter (retractable): 180 mm Max. tenoning tool diameter: 275 mm Max. retractable tool diameter: 140 mm Spindle speed: 3500/6000/8000 rpm Spindle diameter: 30 mm Motor power (400 V / 50 Hz / S6 - 40%): 4 kW (5.5 HP) S6 40% Weight: 430 kg Extraction port diameter: 4 x 120 mm Saw blade guard extraction port Ø: 60 mm Sliding Table with Ball Bearing System - Equipped with a proven ball contact system, tested millions of times - Permanently smooth running due to hardened and ground guides - Not sensitive to dust and dirt, thanks to minimal contact point between ball and trapezoidal rail - 10-year Holzkraft warranty on wear of carbide guideways Extraction Hose Connection The extraction ports on both the surface planer (1) and thickness planer (2) face the same direction. The extraction hose can therefore be connected to the machine from the same side for both modes, eliminating the need for the hose to reach around the machine. Planer Units - Helical-toothed steel infeed rollers ensure constant, even wood feed - Heavy-duty anti-kickback devices prevent workpiece kickback - 3-knife cutterblock ensures optimal surface finish

Būklė: naujas, Gamybos metai: 2026, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder and anodised aluminium sliding table Robust steel and cast iron construction Large supporting surface and precise cast iron table High-precision format sliding table made of anodised aluminium (travel 2250 mm) Large crosscut frame (900 x 600 mm) with extendable aluminium telescopic fence up to 2660 mm, fitted with professional flip-over stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° to 45° Rip fence with fine adjustment Stable saw unit and large double trunnion spindle moulder unit for maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-relieved cast iron Three manually adjustable spindle speeds, 3500-10000 rpm Spindle moulder with right/left rotation Standard supplied hood guard for curved work Safety reversing aluminium fence jaws Two powerful motors with high power reserves Two plug-in handwheels for quick and convenient operation Dimensions and Weights Weight approx. 470 kg Extraction Connection Extraction nozzle diameter: 2 x 120 mm Extraction nozzle diameter (saw blade guard): 60 mm Electrical Data Drive motor power: 2 x 5.0 kW Connection voltage: 400 V Network frequency: 50 Hz Spindle Moulder Spindle tilt: 0 to -45° Usable spindle length: 100 mm Spindle speeds: 3500/7000/10000 rpm Max. cutter diameter non-retractable: 210 mm retractable: 180 mm Tenoning: 275 mm Circular Saw Unit Tedpfx Aashp Rdlo Dja Crosscut length: 1600 mm Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 2660 mm Saw blade tilt: 90-45° Max. cutting height 90°: 90 mm Max. cutting height 45°: 63 mm Max. saw blade projection 90°: 100 mm Max. saw blade projection 45°: 78 mm (Main) saw blade diameter: 315 mm (Main) saw blade diameter explained: independent of scorer (Main) saw blade speed: 4000 rpm Sliding Table and Table Table length: 1112 mm Table width: 430 mm Scope of delivery: Hood guard for curved work Anodised aluminium format sliding table Aluminium fence jaws Flip stops Location: Ex stock 54634 Bitburg - immediately available -

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, 5222454 LIBRA 45/2 RTC 135 Wide Belt Sander 5257433 "Z" Version for RTC 135 5257452 Vacuum table with electric fan, 3 kW 5257453 Oscillating belt air-blast device for 5257454 Oscillating belt air-blast device for 5257462 Reinforced motor, 15 kW (20 HP) 5257485 Roller table at infeed and outfeed for 5257499 Profiled rubber pressure rollers, 2nd position 5257500 Profiled rubber pressure rollers, 3rd position 5257504 Stepless conveyor feed with inverter 5257605 Inspection door with window 5257606 LED lamp for internal lighting TECHNICAL DATA Dimensions and Weights Length (product) approx. 1800 mm Width/Depth (product) approx. 2000 mm Height (product) approx. 2070 mm Extraction Connection Number of extraction ports: 2 Todpey Ehiwofx Aa Doa Extraction port diameter: 200 mm Electrical Data Feed motor power: 0.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Height adjustment motor power: 0.25 kW Output power (motor rating): 11 kW Sanding Unit Sanding belt length: 2150 mm Sanding belt width: 1370 mm Max. sanding width: 1350 mm Feed Unit Feed speed: 4.5 / 9 m/min Workpiece Minimum workpiece height: 4 mm Maximum workpiece height: 170 mm Product information EU 2023/2854 Type of generated data: Usage data Format of generated data: Common, machine-readable formats such as JSON Data volume: Up to 5 MB Continuous real-time data generation: Yes Data storage location: On device and on a remote server Data access: On device and via physical as well as wireless interfaces Location: from stock 54634 Bitburg - Available immediately -

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Combined woodworking machine, 4-function, HOLZKRAFT CU 410c F 26 N Tersa -- Technical Data -- - Circular Saw - Cutting length: 2,600 mm Max. saw blade diameter: 315 mm Max. cutting height at 90° / 45°: 100 / 79 mm Max. crosscut width left of saw blade: 2,310 mm Cutting width at rip fence: 900 mm Saw blade tilting: 90° - 45° - Planer (Jointer) - Working width: 410 mm Planer table length: 1,660 mm Cutterblock diameter / number of knives: 72 mm / 3 pcs. - Thickness Planer - Tjdpfx Aasd Dtc To Dea Table dimensions: 410 x 605 mm Min./max. working height: 3 / 230 mm Max. cutting depth: 4 mm Feed speed: 7 m/min - Spindle Moulder - Usable spindle length: 100 mm Max. tenoning cutter diameter: 275 mm Max. tool diameter: 210 mm Spindle speed: 3,500 / 6,000 / 10,000 rpm Spindle diameter: 30 mm - General - Motor power: 400 V / 50 Hz, 3 x 5.0 kW (6.6 HP) Extraction port diameter: 4 x 120 mm Extraction port diameter (saw blade guard): 60 mm - Special offer price - Location: Ex stock 54634 Bitburg

Būklė: naujas, Gamybos metai: 2025, 4-knife cutterhead for superior planing results Smooth operation thanks to precision unit and heavy cast iron design Front steel feed roller with helical toothing for optimal material feed Satin-finished steel outfeed roller, optionally with rubber roller outfeed The work table is mounted on four oversized columns, ensuring maximum stability under all operating conditions. Planer table height adjustment via handwheel with digital readout (accurate to 0.1 mm) Standard with two feed speeds, conveniently selectable from the operator front High-performance industrial motor Robust steel and cast iron construction Equipment Details: Work Table Mounted on four large-diameter spindles, ensuring maximum stability under all operating conditions Special lifting system maintains table position perfectly, even without locking Tersa Planer Cutterhead No setup or screwing required Knife changes completed in seconds Self-locking system Extremely quiet operation Thickness Table Adjustment for S 41 elite s Via handwheel with digital display for set planing height (accurate to 0.1 mm) Dimensions and Weights Length approx. 900 mm Tjdpfx Ajd Hx Hnea Dea Width/Depth approx. 1070 mm Weight approx. 361 kg Dust Extraction Connection Extraction port diameter thicknessing: 120 mm Drive Performance Main motor: 5 kW Setup Information Required length: 1070 mm Required width/depth: 900 mm Required height: 1100 mm Explanation required space: Dimensions account for maximum travel or usable lengths. Machine Body Length: 1040 mm Machine Body Width/Depth: 900 mm Length: 3000 mm Width: 1600 mm Working Area Explanation: Please add stated values to required space to calculate the total recommended free installation area for the machine. Thicknessing Table Thickness table length: 423 mm Thickness table width: 775 mm Working height min.: 3 mm Working height max.: 240 mm Minimum working length: 180 mm Maximum chip removal: 5 mm Electrical Data Connection voltage: 400 V Planer Cutterhead Type: TERSA Diameter: 95 mm Number of knives: 4 pcs Speed: 5000 rpm Maximum planing width: 410 mm Feed Speed: 6/12 m/min

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Compact wide belt sander with combination sanding unit Special action equipment: - On/off control of the sanding pad from the operator panel - On/off control of the roller from the operator panel - Electronic control Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning with pushbutton Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard with diagonally grooved steel roller Ø 120 mm for calibration Fine adjustment of working height Clear control panel on the front Robust mono-block steel machine body with tubular reinforcement, robot-welded, aggregates mounted high for maximum rigidity Motor-driven height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via geared motor with two speeds Natural rubber feed belt with negative profile Flexible steel pressure rail in front of the first aggregate Rubber pressure rollers, in front of and behind each sanding unit Pneumatic belt tensioning for each unit with decimal adjustment for grit/belt thickness Universally usable for solid wood and veneer, thanks to the combination unit Entry-level model for small businesses Working width 950 mm Equipment details Combination unit for calibration and sanding Diagonally grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite insert Tjdpfxegf Sw Ns Aa Dsa Universal design for calibration and sanding of solid wood, particleboard, and veneer Technical data Product length approx.: 1388 mm Product height approx.: 1668 mm Product width/depth approx.: 1545 mm Extraction connection Extraction nozzle diameter: 140 mm Electrical data Connection voltage: 400V Current type: AC Phase(s): 3Ph Mains frequency: 50Hz Feed motor power: 0.33 / 0.55 kW Height adjustment motor power: 0.25 kW Drive motor power: 7.5kW Sanding unit Sanding belt length: 1525 mm Maximum sanding width: 950 mm Sanding belt width: 970 mm Feed unit Feed speed: 4.5 / 9 m/min Workpiece Workpiece height min.: 4 mm Workpiece height max.: 170 mm

Būklė: beveik kaip naujas (parodų įrenginys), pneumatic single-head boring machine with 21 spindles Todpfx Aed Supgsa Dja MAGGI Model: Boring System 21 STANDARD EQUIPMENT: Aluminium fence with 2 stops (1,500 mm each on right and left) No. 5 quick-change drill chucks No. 2 patented safety clamping cylinders Connection for extraction unit in accordance with EU standards KEY FEATURES: Worktable made of cast iron Boring head made of aluminium Patented helical system for fine adjustment of drilling depth Pneumatic lowering of the boring head with locking at any position between 0° - 90° Extendable cast iron side fences with millimetre adjustment, scale with magnifier Drilling height adjustment via counter with decimal display Fixed stops at 37 mm for hinge boring The machine is built according to CE standards. TECHNICAL DATA: Drill spindles (left red/right black) 21 pcs (10/11) Distance between drill spindles 32 mm Working width 640 mm Max. drilling depth 65 mm Clamping cylinders 2 pcs Max. workpiece size 900 x 3000 x 60 mm Max. workpiece height 65 mm Number of motors 1 pc Motor power 1.5 kW, 400 V, 50 Hz Motor speed 2800 rpm Operating pressure 6-8 bar Air consumption per cycle 10 l/cycle Extraction port diameter 80 mm Worktable height 860 mm Overall dimensions approx. L x W x H 1030 x 1030 x 1285 mm Weight approx. 260 kg

Būklė: naujas, Clean air extraction unit / Dust extractor Tested for dust class H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum performance in this class Very quiet operation Designed for industrial/commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle easily reversible from left to right, allowing flexible use Large inspection openings Large-capacity, mobile chip containers with clamping bracket and chip collection bag Dust extractor delivered fully assembled, ready for immediate use Tsdpfx Aaor A Eq Rs Dja All models are mobile Filter material made of polyester fleece, aluminium-coated for extended service life Filters are antistatic as standard, tested and approved to Category M-BIA The fan is positioned downstream of the filter Extraction motor efficiency class: IE3 Rated air flow: 1,448 m³/h Rated negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter extraction nozzle (inlet): 160 mm Filter area: 9.21 m² Residual dust content: < 0.1 mg/m³ Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a wiper frame

Būklė: naujas, Digital version with motorized thickness table adjustment Todpedvn Hwsfx Aa Dea • Helical-toothed steel infeed roller for consistent and even material feed • Material feed with two speeds • Especially long jointer tables enable easy and precise surfacing of workpieces • Work tables made of cast iron, annealed and stress-relieved, making them durable and permanently flat • Rearward, simultaneously opening jointer tables for short setup times • High machine weight ensures maximum precision and smooth operation • Powerful industrial motor • Robust steel/cast iron construction • Chip removal from as little as 0.2 mm (with a minimum workpiece thickness of 3 mm) thanks to the helical-toothed infeed roller (ideal for economical planing of precious hardwood) Technical Data: Working width: 410 mm Cutterhead diameter: 95 mm Max. chip removal: 5 mm Total jointer table length: 2200 mm Thickness table dimensions: 410 x 775 mm Feed speed thickness table: 6/12 m/min Min. ÷ max. working height of thickness table: 3 ÷ 240 mm Min. working length thicknessing: 180 mm Motor power: 5.0 kW, 400V, 50 Hz Including the following options: • Motorized thickness table height adjustment with digital display • Fold-away auxiliary fence for thin workpieces • TERSA cutterhead

Būklė: naujas, Robust steel and grey cast iron construction High-precision format sliding table made of anodized aluminium, with a travel distance of 2250 mm Maximum saw blade diameter of 315 mm possible, saw blade tiltable to 45° Large squaring frame (960 x 600 mm) with extendable aluminium telescopic fence up to 2660 mm Strongly ribbed cast iron surfacing tables, stress-relieved and annealed for decades of stability and flatness Helically toothed steel infeed roller for uniform material feed Three manually adjustable spindle speeds Spindle moulder with reversing (right/left rotation) Three independent industrial motors With lockable main switch, motor protection switch, emergency stop switch Surfacing table width: 410 mm Surfacing table length: 1810 mm Maximum planing depth: 4 mm Thicknessing table length: 605 mm Thicknessing table width: 410 mm Minimum working height: 3 mm Maximum working height: 230 mm Feed speed: 7 m/min Maximum material removal: 4 mm Extraction port diameter: 4 x 120 mm Cutterblock type: TERSA (3 pcs) Cutterblock diameter: 72 mm Speed: 5200 rpm Panel saw crosscutting length: 2250 mm Cutting width with parallel fence: 900 mm Max. crosscut width left of saw blade: 2310 mm Saw blade tilt: 90–45° Max. cutting height at 90°: 90 mm Max. cutting height at 45°: 63 mm Saw blade diameter: 315 mm Saw blade speed: 4000 rpm Sliding table and worktable Sliding table length: 2600 mm Spindle diameter: 30 mm Spindle speeds: 3500/7000/10000 rpm Max. cutter diameter, retractable/non-retractable: 180/210 mm Main drive motor power: 3 x 5.0 kW, 400 V, 50 Hz Machine weight approx.: 560 kg INCLUDES OPTIONS - Handwheel with gravity numerical display for thickness table positioning Tedpjiiynnjfx Aa Dea - Sliding table length 2600 mm - Professional fences/stops - 'TERSA' cutterblock - Spindle moulder with reversing (right/left rotation)

Būklė: naujas, Electric Heated Platen Press Manufacturer: SCM Model: GS 6/90 30-13 Offer type: New machine Technical Data: Dimensions of heating platens: 3000 x 1300 mm Number of heating platens: 2 pcs Max. temperature of heating platens: 120°C Recommended working temperature of platens: 90°C Number of press cylinders: 6 pcs Hydraulic pump motor power: 3.0 kW, 400 V, 50 Hz Pressing force: 90 t (900 kN) Press cylinder diameter: 70 mm Number of daylight openings: 1 pc Daylight opening approx.: 400 mm Connected load: 26.0 kW, 400 V, 50 Hz Tsdofh Tmmspfx Aa Dsa Heating Platens: Electrically heated aluminum sandwich platens by ELKOM - Germany. Continuously adjustable up to 120°C, up to 150°C on request. Thermal insulation between platens and press frame. The heating platens are mounted with special brackets to allow necessary thermal expansion. Hydraulics: Compact hydraulic pump by HAWE Germany, integrated in the press frame. 2-stage design for closing and pressure build-up phases. Hydraulic cylinders made from high-grade, tempered, and ground steel with large diameters. Press Frame: The press frame is constructed from heavy-duty, torsion-resistant, stress-relieved welded steel. Presses of the GS series can be loaded from all four sides. Press tables are welded from HEA profiles. Precision machining of all assemblies is performed on state-of-the-art CNC machining centers. Uniform and precise movement of the press table is ensured by rack-and-pinion drives and self-lubricating guides at two corners of the press frame. Control System: Side-mounted control panel with SIEMENS 7'' color touchscreen. SCM's proprietary software enables simple and intuitive control of the press. The following parameters can be programmed, retrieved, and changed: - Automatic calculation of the maximum permissible hydraulic pressing force based on the workpiece size. - Ability to store up to 100 programs (temperature, specific pressure, pressing time, platen size). - Direct setting of hydraulic pressure - Option for internet connectivity for remote service. - Electronic control of pressing time - Electronic monitoring of platen temperature - Automatic pressure recovery - Complete diagnostics and fault messages displayed on the screen. OPTIONAL: - Electronic flatness control (misplacement monitoring) - MYLAR film for protection and easy cleaning of electric platens - Surcharge for pressing force 120 t - ELKOM platens with gold anodized finish

Būklė: labai geros būklės (naudotas), Wide Belt Sander for Calibration and Fine Sanding Working width: 1100 mm Tjdpfx Aajtwzyfs Dsa Min./max. workpiece height: 3 - 120 mm Feed motor power: 0.8 kW Abrasive belt speed: 18 m/sec Abrasive belt dimensions: 1115 x 2620 mm Feed speed: 4.5 / 9 m/min Extraction connection: 3 x 160 mm Compressed air connection: 6 bar 1st Unit: Sanding roller rubber-coated, 90 Shore Motor power: 11 kW 2nd Unit: Combination unit Sanding roller, rubber-coated, 60 Shore Sanding pad, fixed Motor power: 11 kW 3rd Unit: Cleaning brush Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Outfeed table extension Dimensions (approx.) L x W x H = 2291 x 1784 x 2350 mm Weight (approx.): 3000 kg Note for used machines: • Technical data subject to error and prior sale. • Listed prices are ex-works, loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are free to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to enquiries including your address and telephone number!)

Būklė: naujas, Technical Data: Working width mm: 1,350 Min./max. working height mm: 4 - 170 Abrasive belt width/length mm: 1,370/2,620 Main motor power kW: 18.5 with inverter Feed speed variable m/min: 3.5 - 18 Working Units: 1st Unit: "RA" angled-ribbed contact roller, Sh 86, diameter 160 mm 2nd Unit: Combo: Rubber-coated sanding roller, diameter 160 mm, 45 Sh Elastic electronic segmented sanding shoe “MESAR” with 24 segments Tjdpohtuvrjfx Aa Dja Version C: - Elastic electronic segmented sanding shoe “MESAR” complete with: - Pneumatic cylinder (On/Off) for automatic engagement/disengagement of the sanding roller/sanding shoe unit - Sector activation via electronic control, synchronizing engagement with the feed speed and adjusting the number of active segments depending on the workpiece geometry, enabling selection of more or fewer sectors to the left and right of the workpiece. - Versions 135: “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece scanning bar at infeed Additional Equipment: Roller table infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with 4 kW electric fan (5.5 HP) integrated into the machine frame Oscillating blow-off device 2nd unit Touch screen 10.4” display with ‘eye S’ software integration ATTENTION: IMAGES ARE SAMPLE PICTURES OF A SIMILAR SD70!

Būklė: naujas, Tilting Spindle Moulder Simple and practical machining operations thanks to the ergonomic arrangement of controls on the front of the machine Digital display for height and tilt position of the spindle Spindle speed display Spindle rotation reversible (clockwise/anticlockwise) 8 speeds Spindle diameter: 30 mm Spindle clamping length: 125 mm Max. tool diameter under table: 240 x 80 mm Extraction port diameter: 2 x 120 mm INCLUDES OPTIONS: 57.02.63 "LL" version for profiling work with 2 table extensions 57.03.30 Motorised height and angle adjustment of the working unit with digital displays 57.01.56 Three-phase motor 7.0 kW 50Hz with star-delta switch 57.00.76 Fence with handwheel adjustment - Fence with stepless adjustment via handwheels easily accessible from the front: – Adjustment of the entire fence relative to the tool – Adjustment of the front ruler to change chip removal – Mechanical digital displays – Wooden fence jaws and connector bars Dimensions (L x W x H): 2500 x 855 x 900 mm Weight: approx. 550 kg Note on used machines: Tedpjcuwptofx Aa Dea • Errors in technical details and prior sale reserved. • Stated prices are ex-location – free loading! • The machines have been cleaned and function-tested. • All machines are sold as inspected, without any warranty whatsoever. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only answer enquiries that include your address and telephone number!)

Būklė: naudotas, Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, Platusis juostinis šlifuoklis SCM Sandya 10 SCM 1100 R+R+RT Specifikacija: • Būklė – naudotas, po kompleksinės apžiūros • Gamintojas – SCM • Modelis – Sandya 10 • Darbinis plotis – 1100 mm • Maksimalus darbinis aukštis – 160 mm • 4 šlifavimo agregatai iš eilės: - kalibruojantis plieninis velenas – 160 mm skersmens - kietos gumos velenas – 160 mm skersmens - kombinuotas agregatas (guminis velenas + sekcijinė batelio tipo šlifavimo galvutė su papildomos prispaudimo funkcija) - dulkių nuėmimo šepetys • Pagrindiniai varikliai – 18,5 ir 12/15 kW galingumo • 2 darbiniai greičiai (antrajame variklyje) • Transporterio greitis reguliuojamas tolygiai • Elektroninis šlifuojamo elemento storio indikatorius • Optinis svyravimas • 2-ojo ir 3-iojo agregatų nupūtimo funkcija • Galimybė kiekvieną agregatą nuleisti/pakelti atskirai • Šlifuojamo elemento storio matuoklis • Stalas paruoštas vakuumo siurbliui (siurblys į komplektą neįeina) • Šlifavimo juostos matmenys – 2150 x 1115 mm • Dulkių ištraukimo jungtys: 4 x 155 mm ir 4 x 120 mm • Svoris apie 1800 kg • Gamybos metai – 1995 • Bendrieji matmenys 215 x 170 x 210 cm (ilgis x plotis x aukštis) Papildoma informacija: • Mašina yra geros techninės būklės, paruošta tiesioginiam naudojimui • Nuotraukose pavaizduota faktinė parduodamo daikto būklė • Galima įjungti ir patikrinti įrenginį vietoje • Nemokamas mokymas dirbti su mašina (įmonės būstinėje) • Aukcione nurodyta kaina nurodyta be PVM ir transporto išlaidų Finansavimas ir transportas: • Organizuojame transportavimą su MDD autoparku, kurjerių įmonėmis ar išoriniais vežėjais Tjdpfxozcy I Eo Aa Dsa • Teikiame finansavimo galimybes – lizingas arba lizingo paskola

Būklė: naudotas, Gamybos metai: 1996, Medžio apdirbimo velenas Medžio skersmuo 50 mm Tsdpfx Aaezlcx Re Dsa Įrankis, skirtas profiliuoti iki 350 mm ilgio detales Parduodamas toks, koks yra, be valymo ar apžiūros.

Būklė: naudotas, Gamybos metai: 2011, APIEŠOS DARBO ZONA X-Y-Z ašys * mm 3050-1300-180 Ruošinio ilgis, dirbant metodais, kai ruošinys judinamas mm 1390 Eiga X-Y-Z ašyse mm 3460-1735-250 Maksimalus X-Y ašių judėjimo greitis m/min 60 DARBINIS STALAS Ruošinių laikiklių ir vakuuminų siurblių skaičius 6 / 2 Standartinis tipas Standartiniai galiniai ribotuvai / padėtis 1 / gale Vakuuminis siurblys m3/h 90/108 GRĄŽTO AGREGATAS Vertikalus velenas Std/skaičius/apsukos 1/min 12 (8X-5Y) / 4000 Horizontalus velenas Std/skaičius/apsukos 1/min 6 (4X-2Y) / 4000 Integruotas griovelio / pjūklo agregatas X Ø mm / 1 / min 120 / 6000 Variklio galia kW (AG) 2,2 (3) ELEKTROVELENAS Variklio galia Std. / Opt. (S6) kW (AG) 7,5 (10) / 11 (15) Maksimalios apsukos 1/min 24000 Įrankių keitiklis, montuojamas ant agregato laikiklio X ašyje 4 vietos, pneumatinis MONTAVIMAS Įdiegta galia KVA 23÷28,5 Suspausto oro sąnaudos Nl/min 450 Ištraukiamo oro sąnaudos m3/h 1900+1900 (3400) Reikalingas ištraukiamo oro greitis m/s 30 Ištraukimo vamzdžio skersmuo mm 150+150 (200) Staklių svoris Kg 3000 * X - atstumas tarp ribotuvų; Y - frezos centras, kaip atskaitos taškas; Z - ruošinio praėjimo angos bendrosios CHARAKTERISTIKOS CNC valdomas gręžimo ir frezavimo centras, C formos konstrukcija, su dariniu stalu, kuriame yra reguliuojami ruošinių laikikliai ir vakuuminiai siurbliai, skirtas atlikti: - vertikalius gręžimus plokštės paviršiuje, - horizontalius gręžimus visose keturiose ruošinio pusėse, - griovelių frezavimą diskinėmis frezomis "X" kryptimi, - bendrus frezavimo darbus. Savilaikė konstrukcija ir darbinis stalas. Konstrukcija pagaminta iš plieninių suvirintų dalių, su valdymo spinta, integruota į staklių korpusą. Galima pasirinkti du skirtingus ilgį ir standartinius ruošinių laikiklius arba TV laikiklius. Judrus agregato laikiklis. Dėžės konstrukcija, pagaminta iš šalto valcuoto plieno su vidiniais sustiprinimo šonkauliais, apsaugos įtaisai su buferiais. Darbinis agregatas susideda iš gręžimo galvutės su vertikaliaisiais velenais, horizontaliais velenais, integruoto griovelio ir pjūklo agregato bei SCME elektroveleno su HSK 63 F tipo įrankių greito keitimo sistema. Portalo ir agregato laikiklio judėjimo diapazonai Judėjimas X, Y ir Z ašyse vyksta linijiniais prizminiais rutuliniais bėgiais, naudojant iš anksto įtemptus judėjimo elementus. X ašies judėjimo perdavimas (judrus stovas) atliekamas per iš anksto įtemptą, be tarpelio dantų stovo pavarą, su įstrižai esančiu judėjimu. Agregato laikiklio judėjimas Y ir Z ašyse atliekamas per iš anksto įtemptus judėjimo elementus. Darbinių agregatų padėties nustatymas ir staklių funkcijų valdymas atliekamas naudojant "Brushless" trifazius servo variklius ir skaitmeninius pavaras. CNC VALDYMAS Valdymo blokas susideda iš skaitmeninio valdymo įrenginio, skirto frezavimo ir gręžimo staklėms, ir išankstinio asmeninio kompiuterio su grafine vartotojo sąsaja "XILOG PLUS". PC - biuro operacinė sistema Windows XP - LCD spalvotas ekranas 17 - Qwerty klaviatūra - pasukamas valdymo pultas - staklių valdymo programinė įranga Xilog Plus Xilog Plus savybės Programavimas - parametrinis, grafinis ir ISO programavimas - DXF ir ASCII failų importavimas - tiesinių ar apskritų interpolacijų atlikimas trijose ašyse, tiesiškai erdvėje, spiralės formos pasirinktoje plokštumoje - palaikomas programavimas su grafine ir sintaksės pagalba gręžimo ir frezavimo operacijoms - automatinė gręžimo operacijų ir įrankių keitimo ciklų optimizacija - galimybė pakeisti plokštės nulinį tašką, kad būtų galima g Tsdpfxjyymz Ue Aa Dja

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: AB/129942, Reismusinis oblius F410 Obliavimo plotis: 410 mm Stalo bendras ilgis: 2600 mm Stalo aukštis: 855 mm Tjdpfx Aezadchsa Dja Padavimo stalo ilgis: 1450 mm Aliumininis tvorėlė pasvirusi iki 45° Tvorėlės matmenys: 1100 x 170 mm 4 peilių velenas, skersmuo: 120 mm Veleno sukimosi greitis: 5000 aps./min Variklio galia: 4 kW Grovės apsaugos įtaisas SCM, integruotas į staklių korpusą Siurbimo anga, diametras 120 mm Rankinis žvaigždė-trikampis jungiklis Variklio jungiklis su įtampos kritimo išjungimu Pagrindinis jungiklis, užrakinamas Automatinis variklio stabdis Reguliuojama pagalbinė atrama Apžiūrėti galima ARDENNE regione

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, šlifavimo plotis: 1 350 mm, SCM Wide Belt Calibrating and Fine Sanding Machine Model: dmc sd 60 RCS 135 Technical specifications: Working width: 1,100 mm Min./max. working height: 4–170 mm Abrasive belt width: 1,120 mm Abrasive belt length: 2,150 mm Main motor power: 11 (15) kW (hp) Feed gearbox motor: 0.45/0.8 (0.6/1.1) kW (hp) Feed speed: 4.5 / 9 m/min Standard equipment: - R140/85 rubber-coated calibrating roller, 140 mm diameter, 85 Shore – 1st position - R160/45 rubber-coated sanding roller, 160 mm diameter, 45 Shore – 2nd position - Hard sanding pad with manual working height adjustment - Motor power for 1st unit: 11 kW (15 hp) - Electronic ammeter for main motor current display - Electronic display of working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Anti-kickback device at infeed before first unit - Rubber feed belt, 60 Shore - Roller table with two rollers at infeed and outfeed of working table - Feed belt with two speeds (4.5 / 9 m/min) with gearbox motor - Automatic belt tracking Including the following special accessories: 1 pc. Version “B” for RCS, including: pneumatic on/off switching of roller on 1st unit “R”, pneumatic on/off switching of roller on 2nd unit “CS”, “MESAR” elastic segmented sanding pad, pneumatic on/off switching of sanding pad unit, electronic programming unit “LOGIC 50”, electronic adjustment of working height 1 pc. CE safety compliance 1 pc. roller table at infeed and outfeed for long workpieces, fitted with 5 non-driven rollers 1 pc. “RA” skewed-ribbed steel contact roller, 1st unit 1 pc. main motor 15 kW 1 pc. sanding belt wear optimizer 1 pc. LED internal lighting Tsdpfotwqn Sjx Aa Dea 1 pc. rear door with inspection window 1 pc. Logic SC control system