Apdirbimo centras

SCM TECH Z1

Būklė: naudotas, Gamybos metai: 2013, bendras aukštis: 2 240 mm, bendras ilgis: 5 240 mm, bendras plotis: 2 500 mm, Unladen weight: 2,700 kg - Year of manufacture: 2013 - Documentation available: Yes - CE marking present: Yes - CE certificate available: No - Serial number: AA1/017355 - Number of milling spindles [pcs]: 1 - └ Milling spindle 1: Dcodpfx Afewnii Rj Aog - - Number of controlled axes [pcs]: 3 - - Max. spindle speed [rpm]: 24,000 - - Main motor power [kW]: 9.5 - Type of router table: Beam table - Drilling unit included: Yes - └ Horizontal drilling spindles [pcs]: 6 - └ Vertical drilling spindles [pcs]: 12 - Sawing unit included: Yes - System/software: SCM Maestro - Working area X [mm]: 3050 - Working area Y [mm]: 1250 - Z-axis working range [mm]: 1810 - Y-axis maximum stroke [mm]: 1550 - Voltage [V]: 400 - Power consumption [A]: 31 - Transport dimensions: 5240mm x 2500mm x 2244mm (L x W x H) - Transport weight [kg]: 2700 kg - Transport packages [pcs]: 1 Financial Information VAT: The stated price is net of VAT VAT/margin scheme: VAT is deductible for businesses Delivery and trade-in possible at any time for all types of industrial equipment Glenn Smeets

Būklė: naudotas, Gamybos metai: 2005, 2005 BIESSE ROVER B 4.40 FT 3 ašių CNC apdirbimo centras Techninės specifikacijos paskutinėje nuotraukoje Darbo valandos (įjungtas): 45.343 Dedpowmdynofx Af Ascg Darbo valandos automatiniame režime: 27.267

Būklė: naudotas, mašinos/transporto priemonės numeris: 007716, Working area X-axis: 3250 mm Working area Y-axis: 1220 mm Working table: With vacuum pod supports Main spindle power: 12 kW Number of controlled axes: 4 axes Number of drilling spindles: 18 Number of tool changers: 16 Djdpfx Afjwuz N Ns Ajcg

Būklė: naudotas, Painting line consisting of: Pos.1 Belt Conveyor Infeed - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm Dodpev I Akvsfx Af Aecg - Feed rate adjustable via handwheel ~ 2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.2 Cefla Dust Removal Machine - Manufacturer: Sorbini - Model: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm ± 20 mm - Operator side: right - Roller transport - 2 upper air blast ducts - 1 lower air blast duct - Dust removal brush - With ionizing bar above - With ionizing bar below - With own drive - With independent control system - Length: approx. 910 mm - Width: approx. 2,600 mm - Weight: 1,260 kg - Extraction port diameter: 180 mm + 120 mm - Total connected load: 7.6 kW - Voltage, Frequency: 400 V / 50 Hz Pos.3 Venjakob VEN SPRAY Perfect Automatic Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY PERFECT - Year of manufacture: 2013 - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Operator side: left - IR pre-heating, number of emitters: 2 pcs. - Dual spray gun drive - Dry extraction - Extraction port diameter: 600 mm - Exhaust air capacity: 10,000 m³/h - Belt conveyor system - Continuously variable feed rate ~ 4–10 m/min - Belt cleaning system - Paint recovery via V-belt system - Gun control EPS-CNC 7000 - Color management system for 3+1 pump units - Number of installed Airless spray guns: 4 pcs. - Quick-change system for spray units - Remote maintenance system - Dust protection hood at the machine outlet - Exhaust air recirculation system - Extraction fan air control - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length: 5,509 mm - Width: 4,500 mm + 2,400 mm - Height: 3,380 mm + 510 mm - Total connected load: ~20–26 kW - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 - Kremlin AVX AirMix spray guns - Small batch container - Spray gun boom system for quick removal of 4 AirMix spray guns from the spray cabin, incl. quick couplings for pneumatic and material hoses. Pos.4 Venjakob Belt Conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.5 Cefla Vertical Dryer - Manufacturer: Cefla - Model: VN 2000/5500/190.5/30 - Year of manufacture: 2003 - Working width: 1,300 mm - Number of pallets: 30 pcs. - Pallet length: 5,600 mm - Usable pallet length: 5,300 mm - Load capacity per pallet: 300 kg - Max. part height: ~110 mm - Clear height between pallets: 120 mm - Distance: center of pallet to center of pallet: 3,658 mm - Max. part length: ~5,200 mm - Number of controllable temperature zones: 2 pcs. - Fresh air capacity: 6,000 m³/h - Exhaust air capacity: 6,000 m³/h - Max. heating capacity: 175 kW - Max. drying temperature: ~55–60 °C - With heat exchanger, hot water - Without hot water control valves - U-shaped pass-through configuration - Infeed side right - Feed speed via frequency inverter ~2–20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length: 7,820 mm - Width: 6,130 mm - Height: 3,905 mm - Total connected load: ~23 kW - Voltage, Frequency: 400 V / 50 Hz - Voltage fluctuations max. ±5% - Without control valves and water pumps Pos.6 Belt Conveyor Infeed - Manufacturer: Cefla - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035

Būklė: naudotas, Gamybos metai: 2011, Base Machine M800 X5 TV 1 WORKING AREA X: 5,020mm Y: 1,830mm Z: 675mm Clearance Height: 300mm (starting from 50mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic design made from thick-walled steel. It is reinforced with welded-in parts across the entire machine bed, providing extreme stability. The table design, with a large base, is the key to ensuring lasting precision and stability. The machine layout allows users to maintain an optimal workflow while requiring minimal floor space. The movable gantry beam is built from a solid monoblock. It is positioned along the X-axis on prismatic, ground guides using recirculating ball carriages. On this mobile unit carrier, the working unit is also mounted on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axis movements take place on prism linear guides with large cross-sections and recirculating ball shoes with large contact areas, ensuring optimal sliding even at maximum speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large-diameter recirculating ball screws guarantee accurate positioning of the working unit along the movable gantry (Y and Z axes). Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality actuators and brushless motors. Maximum axis speeds: · X-axis = 90 m/min Dcsdpsxy Tmnofx Af Aog · Y-axis = 90 m/min · Z-axis = 30 m/min Safety Device with Bumper and Light Curtain 1 Bumpers with sensors are installed around the movable stand, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the access restrictions of floor mat systems. It prevents unwanted interruptions of the machining cycle and gives greater freedom of movement around the worktable. CE Certification for the Safety System 1 Safety protection fence 1 Protective fencing at the sides and rear Automatic Central Lubrication controlled by CNC 1 Lubrication of the X, Y, and Z axes is managed by CNC control at regular intervals, eliminating manual intervention at the machine. Central Extraction Connection 1 All individual extraction ports of the processing units are combined into a central extraction nozzle. Various slide gates inside the nozzle are controlled by the NC unit, reducing the required extraction air flow. Chip Conveyor 1 Maxi - 5-axis Electrospindle 11 kW HSK-63 "Prisma K 1" 5-axis electrospindle with 11 kW output at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Left/right rotation Liquid cooling Tool interface: HSK 63F 18 kW Inverter provides stepless, even power delivery Max. rotation: B-axis = 200° (±100°) C-axis = 650° Thanks to non-orthogonal axes, it is possible to perform complex horizontal positioning within a small working area. This enables the machining of complex geometries without collision risk.

Būklė: naudotas, Gamybos metai: 2014, bendras aukštis: 2 400 mm, bendras ilgis: 4 500 mm, bendras plotis: 2 200 mm, Unladen weight: 2,500 kg CNC Machining Centre Biesse Skill 12 24 G FT Year of manufacture: 2014 Machine no.: 60961 Spindle mount: HSK F63 10x vertical drilling units 12 tool changing positions Software: BiesseWorks X-axis: 2,465 mm Dsdpfx Afjwnhane Ajcg Y-axis: 1,260 mm Z-axis: 324 mm Disassembled for transport on a standard trailer; 4,500 x 2,200 x 2,400 mm; net weight 2,000 kg - Special features: - Description: The pallet with the white control box is not part of this machine - Year of manufacture: 2014 - Documentation available: Yes - CE certificate present: No - Serial number: 60961 - Number of milling spindles [units]: 1 - Type of machining table: flat table - Drilling tools included: Yes - Vertical drilling spindles [units]: 10 - Tool changer positions [units]: 12 - Vacuum pump included: Yes - Quantity [units]: 1 - Brand: Becker - Working area X [mm]: 2,465 - Working area Y [mm]: 1,260 - Working area Z [mm]: 324 - Transport dimensions: 4,500 mm x 2,200 mm x 2,400 mm (L x W x H) - Transport weight [kg]: 2,500 kg - Number of transport packages: 1 Financial information VAT: The stated price is exclusive of VAT VAT/margin scheme: VAT deductible for business customers Delivery and trade-in possible at any time for all items from the industrial sector Glenn Smeets

Būklė: naudotas, Gamybos metai: 2005, Apdirbimo matmenys: 3000 x 1600 x 180 mm Aukšto slėgio siurblys 60 AG / 45 kW Modelis E-60 Darbinis slėgis 4 130 BAR Vandens suvartojimas 4,69 litro/min. Programinė įranga: Watercad-CAM Automatinis pjovimo optimizavimas Sandėliavimo vieta: klientas Dodpfx Asxgfbqof Ascg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, - 3-osiowe centrum CNC SCM Pratix S - model PRATIX 12B z 2012 roku. - Zakres osi X, Y, Z: 2500x1250x150+ mm - Liczba pozycji narzędzi w magazynie: 8 - Stół maszyny: stół rastrowy aluminiowy, 2 sekcje. - Sterowanie: sterowanie PC - Oprogramowanie: SCM NESTING, SCM XILOG MAESTRO - Numer seryjny: AH/115920 Liczba osi frezujących: 1 Agregat wiertarski: 1 – praktycznie nieużywany Maksymalna prędkość wrzeciona: 24 000 obr/min Dodpfxsuu Ntgs Af Ajcg Uchwyt narzędziowy: HSK-F63 Silnik główny: 6,6 kW Konstrukcja portalowa: maszyna z ruchomym portalem Pompy próżniowe: 2 szt. BECKER z 2012 roku – jedna ustawiona na zewnątrz, druga zamontowana w maszynie. Wydajność pompy próżniowej m³/h: 240/280 m³/h Interfejs do odczytu formatu CAD (.dxf) Zabezpieczenia: Odrzuty Waga ok. 2 500 kg Długość: 5 900 mm Szerokość: 2 790 mm Wysokość: 2 190 mm Automatyczny pomiar długości narzędzia

Būklė: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm 0.4 / 3 Edge thickness for solid strips/slats (min/max) mm 0.4 / 8 (12)* Dcodpfxjxlqnts Af Asg Panel thickness (min/max) mm 8 / 60 Control system "StarTouch" + "Touch 7" Feed speed m/min 12-18 Top pressure driven by V-belt (C.N.) Sprayer unit (for liquid anti-adhesive) AAR Adjustable fence, CNC-controlled "EASY SIZE PLUS" Jointing cutter unit 2 x kW Infrared heating for workpiece edge Gluing unit (P.U.R. glue + premelter) "VC/800" - "VC/6" + "AirFusion AF15" Edge pressure zone (CNC-controlled) Edge magazine for rolls - 1 End trimming unit K/SEL Premilling unit RS/K Milling unit RI / 800 (3 positions) Multi-function unit (radius/profile milling) "4 EDGE" KIT Spraying units (for sliding liquid) Profile scraper unit RAS/1000 Flat scraper unit RCA / 2C Universal milling unit for grooving/rebating and profiling K-100 (1 x kW 1.8) 90° Hot air blower - edge finisher Return direction "SAG" Mod. SPINNER 47 / 63

Būklė: labai geros būklės (naudotas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Working head safety cabin. Complete machine safety enclosure Infeed support table (workpiece support). Outfeed table (with conveyor belts) Workpiece feed with no. 3 conveyor belts (feed speed (m/min) max approx. 130) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Total installed power (kW) 99 Dcjdpfx Aegwbbqsf Asg No. 2 WORKING UNITS (TOP): (SERVO-MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles 40) No. 3 WORKING UNITS (BOTTOM): (SERVO-MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + no. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue application and dowel insertion (right side) No. 8 injection nozzles for glue application and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)