Schaublin 102 Vm pirkti naudotą (53)

Sąlyga: naudotas, TECHNICAL DATA - Max. swing over bed: 270 mm - Max. swing over cross slide: 130 mm - Distance between centers: 440 mm - Spindle nose: CAMLOCK D1-3' - Max. bar diameter: 28 mm - Power: 7.5 kW - Spindle speed: 0–5000 rpm with variator - Travel (X x Z): 180 x 400 mm - Feed rates: 0–5000 mm/min with variator - Rapid traverse: 7500 mm/min - Power supply: 3-phase 380V 50Hz, 14 kW - Dimensions: 1700 x 1226 x 1660 mm - Weight: 1415 kg EQUIPMENT/ACCESSORIES - FANUC 20-T CNC controller - Multifix 'A' quick-change tool turret Lhedpfsuhcarsx Af Ijb - SCHAUBLIN B32 collet chuck - Tailstock with handwheel - Coolant tank with pump

Sąlyga: naudotas, TECHNICAL DATA - Strokes: 320 x 150 x 375 [mm] - Distance from vertical spindle to table surface: 310 [mm] - Distance from horizontal spindle to table surface: 410 [mm] - Spindle speeds (stepwise adjustment): 58–2000 [rpm] - Spindle taper: ISO 30 - Feeds: 12–400 [mm/min] - Rapid traverse: 1200 [mm/min] - Power supply: 3 x 380 [V/50 Hz] - Motor power: 1.5 [kW] - Total installed power: 2.1 [kW] - Machine dimensions (L x W x H): 1500 x 1100 x 1600 [mm] - Machine weight: approx. 700 [kg] Lhjdpeuhbw Nefx Af Ijb ACCESSORIES - Swivelling vice - Coolant system

Sąlyga: naudotas, TECHNINIAI DUOMENYS - žiūrėkite nuotraukas Lhjdpfx Afjw Ihtyo Ijb

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Schaublin 102 VM Ljdexq D Nujpfx Af Iehb Iš viso sandėlyje bus 8 vnt Kaina nurodyta už vienetą

Sąlyga: naudotas, Working Area Centre Height: 102 mm Centre Distance: - with standard headstock: 450 mm - with reduction gear headstock: 375 mm - over bed: 200 mm - over cross-slide: 120 mm Headstocks Spindle nose for collets type Schaublin W25 Spindle bore: 25 mm Collet through-hole: 20 mm Reduction gear ratio: 1:5 Bed Height x width x length: 168 x 130 x 1000 mm Bed made of cast iron, trapezoidal profile as on lathe 102 N, hardened and ground dovetail guideways. Slides Maximum travel on bed: 400 mm Tool slide width – length: 80 – 194 mm Manual adjustment travel: 90 mm Centre height over tool slide: 20 mm Tool holder shank: 12 x 12 mm Cross-slide width – length: 94 – 300 mm Manual adjustment travel: 100 mm Saddle guide length on the bed: 250 mm Leadscrew Leadscrew for longitudinal turning and thread cutting, Ø 40 mm Leadscrew hardened, thread ground, pitch 4 mm Lodpfx Afebxkl Te Ishb Speed Range Spindle speed: 270 – 3000 rpm Longitudinal feed: 0.02 – 0.3 mm/rev Thread Cutting Maximum pitch with standard change gear set: 4 mm Machine plate for 20 metric pitches: 0.25 – 4 mm Machine plate for 25 imperial pitches: 80 – 6 TPI Tailstock Quill diameter: 30 mm Quill taper: 2 Morse Quill travel: 80 mm Coolant Equipment Coolant tank capacity: 23 litres Net Weights Lathe on workbench, approx. 225 kg Lathe on cabinet base, approx. 550 kg

Sąlyga: geras (naudotas), Centre height: 102 mm Centre distance: 450 mm Lead / feed screw W20 collets available Speed: approx. 210 – 3000 rpm Reduction gearbox Left and right rotation 2-speed drive Lhedpfxjcug H Se Af Ijb Dimensions (L x W x H): approx. 1760 x 595 x 1230 mm Weight: approx. 650 kg Various "Schaublin 102" models available in stock!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Schaublin 102N-VM-CF hochpräzisions-Drehmaschine aus Schweizer Fertigung Baujahr: 2005 Max. zulässiger Umlaufdurchmesser über Bett: 200 mm Max. zulässiger Umlaufdurchmesser über Support: 120 mm Spitzenhöhe: 102 mm Spitzenweite: 450 mm Bettlänge: 1000 mm Betthöhe: 168 mm Ledpjw N Rh Asfx Af Iehb Motorleistung: 4,2 kW Spindeldrehzahl: 100 - 3000 U/min Spindelaufnahme: W25 Querweg X-Achse: 100 mm Auflösung X-Achse (Radius): 0,01 mm Längsweg Z-Achse: 90 mm Auflösung Z-Achse (Radius): 0,01 mm Leitspindel: - 8 Längsvorschübe - Größere Vorschübe möglich bei Nutzung der Gewindesteuerung zum Drehen Maximaler Werkzeugquerschnitt (Multifix-System): 10x10 mm Stangenspanner (Multifix-System), Durchmesser: 20 mm Höhen- und seiteneinstellbarer Reitstock: Innenkonus Hülse: MK2 Reitstockdorn-Ø: 30 mm Reitstockweg: 80 mm Kühlmitteltank: 23 Liter Elektr. Anschlusswert: 400 V Abmessungen (L x B x H): 1500 x 510 x 1550 mm Zubehör / Optionen: - ACU-RITE Digitalanzeige, 3-Achsen (X-Z-Z1): X-Auflösung 0,001 mm Z-Auflösung 0,005 mm Z1-Auflösung 0,005 mm - Kühlmittelanlage - Rückseitige Blechverkleidung - Doppeltes Start/Stopp-Pedal mit Spindelumkehr - Schaublin W25 Spannzangensatz - Gussfutter W25 Ø110 mm mit Backen - Multifix-A Schnellwechselrevolver mit Haltern - Antriebssystem für Zusatzaggregate mit Riemen, verstell- und schwenkbare Riemenspannvorrichtung, kompletter Antrieb mit Motor, Riemen Ø6x2.500 mm - Reitstock - usw. Unter Strom in unserem Lager verfügbar.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, High-Precision Lead Screw Lathe Schaublin 102N-VM Technical Data: >> Machine No.: 283152 >> Centre Height: 102 mm >> Distance Between Centres: 450 mm Lhodpswvq Tmefx Af Ieb >> Spindle Bore: 25 mm >> Longitudinal Feeds: 8 settings from 0.02–0.3 mm/rev >> Metric Threads: 20 pitches from 0.25 to 4 mm >> Imperial Threads: 25 pitches from 80 to 6 TPI >> Tailstock: Morse Taper 2 (MT2) >> Infinitely Variable Speed Range: 270–3000 rpm >> Weight: approx. 700 kg Accessories: >> 3-jaw chuck with 2 sets of jaws >> Tool holder with 6 tool pockets >> Quick collet closer, draw tube, and 34 collets >> Coolant system >> Cutting tools, drill chuck (see photos) >> Operating manual with spare parts list About the Machine: For sale is a Schaublin 102VM lead screw lathe in very good condition. The machine is, of course, fully functional. All slides run smoothly and evenly. Even at high speeds, the 102VM runs quietly. The gear set for thread cutting is included, although it may not be complete. Take advantage of the opportunity to inspect this machine under power on site and see its excellent condition for yourself.

Sąlyga: naudotas, Gamintojas: Schaublin Mūsų vertinimu, įrenginys yra geros naudotos būklės ir gali būti apžiūrėtas prijungtas prie elektros pagal susitarimą dėl laiko. Įskaitant priedų paketą, žiūrėkite nuotraukas. Priedai, nuotraukose pavaizduoti įrankiai ir tvirtinimo priemonės yra įtraukti į pristatymą tik tuo atveju, jei tai nurodyta papildomoje informacijoje. Lhsdpfxew A Ap To Af Iob Techninių duomenų ir informacijos pakeitimai bei klaidos, taip pat tarp pardavimų, yra rezervuoti!

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Fine turning lathe, Manufacturer: SCHAUBLIN, Model: 102 N 80 Serial no.: BL 280280 Technical data: Center distance approx.: 400 mm Center height: 102 mm Spindle bore: 26 mm Speeds: see speed chart Width x depth approx.: 1.3 x 0.5 m Lsdpsycczbsfx Af Ijhb Machine weight approx.: 0.4 t

Sąlyga: naudotas, Schaublin 102-N80 Šveicariškas precizinis tekinimo staklės Techninės specifikacijos: Centro aukštis: 102 mm Atstumas tarp centrų: 450 mm Veleno kiaurymė: 32 mm reduktorius kairės / dešinės eigos 2 pakopų pavara Vario greitis: 270-3000 aps./min knee circuit Tekėjimo skersmuo virš staklių: 200 mm Veleno antgalis: W20 Galinė atrama: MK 2 Matmenys (IxPxA): apie 140x56x123 cm Svoris: apie 550 kg Lhedpjxxavgefx Af Ijb Priedai / pasirinkimai: - 3 žandikaulių griebtuvas su žandikauliais - 4 žandikaulių griebtuvas su žandikauliais - Įrankių laikikliai - Schaublin įvorės nuo 0,5 mm Po įtampa mūsų sandėlyje.

Sąlyga: naudotas, Rankinė svirties tekinimo staklės SCHAUBLIN, modelis 102 Mechaniko tekinimo staklės Staklių Nr. 208322 Gamybos metai apie 1970 Viso ilgio lova 650 mm Aukštis virš lovos 102 mm Aukštis virš skersinio stalo 53 mm Vidutinė pagrindinio veleno apsisukimų dažnis apie 2.800 aps./min (3 greičių pakopos) Variklis 0,37 kW, 2800 aps./min Maitinimo įtampa 380 V, 50 Hz - Rankinė svirties įpjovimo ir atpjovimo stovas su tiksliai reguliuojamais ribotuvais - Įrankio laikiklis su precizišku aukščio nustatymu - Spaustuvo įranga (yra tik viena spaustuvinė įvorė) - Sukimosi greičio keitimas perjungiant pavaros diržą Reikalinga vieta su stalu pagrindu I x P x A 1150 x 600 x 1200 mm Svoris su stalu pagrindu 130 kg Gera būklė Lsdpfew Iq Umex Af Ishb

Sąlyga: naudotas, Centre height 102 mm Centre distance 450 mm Spindle bore 25 mm Spindle speed: 220 - 2600 Accessories have not been checked for completeness Cabinets are not included in the scope of delivery. Lhodpfswbi Hpsx Af Isb

Sąlyga: geras (naudotas), Centre height: 102 mm Distance between centres: 450 mm Spindle bore: 32 mm Reduction gearbox Left/right rotation 2-speed drive Variable speed: 270–3000 rpm Knee lever operation Swing over bed: 200 mm Spindle nose: W 20 Tailstock quill: MK 2 Dimensions (LxWxH): approx. 140x56x123 cm Lodpfscpznhjx Af Ishb Weight: approx. 550 kg Accessories available Manual available Various 'Schaublin 102' models in stock!

Sąlyga: geras (naudotas), Right- & left-hand rotation with knee reversing switch 2-speed variable drive Headstock with reduction gearbox Cross slide with 90 mm travel Tripan tool holder 1 set of W20 collets 2 drawers Lamp 380 VAC Centre distance: 350 mm Lhsdpfx Afod Htvdo Ieb Centre height: 102 mm Swing diameter over bed: 200 mm Swing diameter over cross slide: 120 mm Spindle bore: 20 mm Spindle speed: 55 - 3000 rpm / infinitely variable Tailstock quill: MT 2 Weight: approx. 500 kg Machine dimensions (W x D x H): approx. 1300 x 600 x 1300 mm Various versions of "Schaublin 102" available from stock!

Sąlyga: geras (naudotas), Center height: 130 mm Center distance: 450 mm Speed: approx. 55–3000 rpm Pneumatic clamping system Spindle nose: W 25 Various W25 collets available Various holders available BERGER LAHR axis motors Combitec EIP E-500 control unit Manual for control included Coolant system included Machine lamp included Machine feet included Dimensions (LxWxH): approx. 1400x560x1230 mm Weight: approx. 550 kg Ledpscuhvujfx Af Iohb Various versions of "Schaublin 102" in stock!

Sąlyga: labai geros būklės (naudotas), The used SCHAUBLIN 120 VM precision centre lathe is a Swiss-made manual lathe of medium/small size, with a centre height of 120 mm, a distance between centres of 600 mm, and a spindle bore of 25 mm. The machine is equipped with feeds and various accessories, already complete with electrical cabinet and wiring compliant with standards; accessories and condition as per photos. Lsdpswqxcfjfx Af Iehb

Sąlyga: naudotas, TECHNINIAI DUOMENYS - Viršūnės aukštis: 102 [mm] - Didž. skersmuo virš lovos: 200 [mm] Lhodpfx Aow Ihttef Isb - Atstumas tarp viršūnių: 470 [mm] - Ašies laikiklio tipas: W20 - Skylė: 20 [mm] - Perėjimas nuo strypo prie įvorės: 14,5 [mm] SVORIS IR IŠMATAVIMAI - Užimamas plotas: 1500 x 800 [mm] - Staklių aukštis: 1300 [mm] - Staklių svoris: 500 [kg]

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 310435, Completely overhauled – new paintwork, New workbench Country of manufacture: Switzerland Voltage: 380V, 50Hz, 3Ph Customs code: 8458.1930 TECHNICAL DATA - Centre height: 102 mm - Centre distance, headstock type W, standard: 470 mm - Centre distance, headstock W with reduction gearbox: 375 mm - Swing over bed: 200 mm - Swing over cross-slide: 120 mm Bed: - Height-width-length: 168-100-1000 mm Cast iron bed with ground trapezoidal profile Headstocks: - Spindle nose for collets: W-25 Ljdpfjdr R Tcox Af Ishb - Collet through-hole: 19.0 mm - Reduction ratio of gear drives: 1:5 Cross slide: - Longitudinal travel: 90 mm - Cross travel: 100 mm - Tool shank cross-section: 12x12 mm Tailstocks: - Quill taper: Morse 2 - Quill travel (tailstock with leadscrew and handwheel): 80 mm Errors or omissions excepted Technical data are provided without obligation Inventory no. 2250006, machine consisting of: 1 NEW workbench 2000x800 mm with blue Urphen slab 2000x800x50 mm 1 base, 1 cabinet B750 with 7 drawers 1xD50/2xD75/2xD100/1xD150/1xD200 1 bed drive from above 1 workpiece headstock W-20 without gear drive and overhauled clamping key 1 overhauled cross-slide 1 overhauled, aligned tailstock 1 motor 380V/50Hz/3ph, 2 speeds 1 set of W-20 collets 1 3-jaw chuck Ø 100 mm on W-20 flange 1 new set of Multifix toolholders consisting of: - 1 turret A with bolt AG20 - 3 toolholders AD1675 - 1 bar toolholder AH2085 1 self-tightening drill chuck capacity 1-13 mm on Morse taper 2 1 live centre MK2 OPTIONAL 1 used clamping device with new belt CHF 500.-- + VAT 1 GRINDING MACHINE TYPE B-8 with 360° swiveling spindle, max. speed 28,000 rpm, height adjustable, with fine adjustment, Ref. 800053 CHF 1,325.-- + VAT.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, veleno greitis (maks.): 5 000 aps./min, bendras aukštis: 1 840 mm, bendras svoris: 3 040 kg, valdiklių gamintojas: FANUC, valdiklio modelis: 18i-TB, ašių skaičius: 4, Šios 4 ašių "Schaublin 140R" CNC horizontalios tekinimo staklės pagamintos 2008 m. Staklės turi CNC "Fanuc 18i-TB" valdymą, maksimalų 300 mm tekinimo skersmenį ir 50-5 000 apsukų per minutę suklio sukimosi dažnį. Joje įrengta Y ašis ir papildomas suklys, revolveris su 12 varomųjų įrankių stočių. Jei ieškote aukštos kokybės tekinimo galimybių, apsvarstykite mūsų parduodamas "Schaublin 140R CNC" stakles. Susisiekite su mumis ir gaukite daugiau informacijos. Papildoma įranga • Įrenginys tiekiamas su instrukcijomis ir CE atitikties deklaracija Mašinos privalumai Techninės mašinos privalumai • Varomų įrankių stotys: 12 • Maksimalus įrankio dydis: 20 x 20 mm • Varomojo įrankio greitis: 30–6000 aps. /min. • Uodegos atrama a2-3 • Galimybė montuoti 3 žandikaulių griebtuvą: taip • Rekomenduojamas maksimalus tekinimo skersmuo: 200 mm • Aušinimo skysčio sistema: bako talpa 180 l, siurblio našumas 20 l/min, siurblio slėgis 6 bar • Maks. Tekinimo skersmuo: 300 mm • Rekomenduojamas maksimalus tekinimo skersmuo: 250 mm • Įrengta y ašimi ir subvelenu Lodpeyalqgefx Af Ishb Papildoma informacija Mašina vis dar įjungta Dimensions Machine Depth 2650 mm

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Schaublin 150 High-Precision Lathe with 2-Axis Digital Readout ND780 Technical Specifications: >> Year of manufacture: approx. 1980 >> Centre height: 150 mm >> Centre distance: 630 mm Lhodpfx Afewynlue Ijb >> Swing over bed: 340 mm >> Spindle nose: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025–0.35 mm/rev >> Metric threads: 0.25–14 mm >> Tailstock: MT3 >> Infinitely variable spindle speeds: 55–3000 rpm >> Rapid traverse motor: 1500 rpm >> Total power requirement: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> 160 mm 3-jaw chuck, 1 set of jaws >> Multifix B, 3 holders >> Collet system with collets >> Change gears >> Stops >> Coolant system >> 1 box of change jaws >> Centres >> Operating manual About the machine: For sale is a Schaublin 150 high-precision lathe. The machine is operational, equipped with rapid traverse, and is in good used condition. Take the opportunity to inspect the machine under power on site and see its condition for yourself.

Sąlyga: geras (naudotas), Tailstock for lathe, counter bearing for dividing head, indexing device Lhjdpfx Afed Riw He Iob - From: Schaublin 102 - Collet chuck mount: W25 - Drawing: see photos - Dimensions: 450/360/H170 mm - Weight: 11 kg

Sąlyga: geras (naudotas), gerai veikiantis Schaublin su priedais pagal nuotraukas, su daugybe laikiklių Ljdpfx Asyaaztsf Ishb

Sąlyga: labai geros būklės (naudotas), Centre height 125 mm Centre distance 500 mm Spindle speeds 40–3000 rpm Various accessories MARCELS MASCHINEN CH Ljdslyrciopfx Af Iehb

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2002, veikimo valandos: 2 500 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 350523, Įranga: CE žymėjimas, Voltage: 380V Net weight: 1,400 kg Customs tariff number: 8458.1120 Dimensions: 180 x 128 x 172 cm TECHNICAL SPECIFICATIONS CAPACITIES Maximum turning diameter: 270 mm Maximum diameter over cross slide: 115 mm Center height over cross slide: 60 mm Turning length B32: 265 mm Center height above floor: 1,162 mm HEADSTOCK A2-4 / Camlock D1-3’’ Spindle for collets Schaublin Hainbuch / F38 / B32 Spindle speed: 50 – 5,000 rpm AC motor drive – continuous/intermittent power: 5.5 / 7.5 kW AC motor drive – continuous/intermittent torque: 42 / 58 Nm Spindle bore (without clamping key): 39 mm Maximum bar capacity with collet: 32 mm Maximum bar capacity with automatic chuck: 32 mm PNEUMATIC CLAMPING Adjustable axial clamping force, force at 5 bar: 1,150 daN CROSS SLIDE Transverse travel, X-axis: 190 mm Resolution, X-axis (radial): 0.0005 mm AC motor drive – continuous/intermittent torque: 4 / 14 Nm Ball screw, Ø x pitch: Ø 20 x 5 mm Longitudinal travel, Z-axis: 390 mm Resolution, Z-axis: 0.001 mm AC motor drive – continuous/intermittent torque: 4 / 14 Nm Ball screw, Ø x pitch: Ø 32 x 5 mm FEEDS Working feed, X and Z axes, stepless: 0 – 5 m/min Rapid traverse, X and Z axes: 8 m/min REVOLVER TOOL SYSTEM Standard tool holder interface: VDI 20 Number of fixed/rotating tool stations: 8 / - Max. tool size: 16 x 16 mm Integrated coolant supply and bi-directional indexing: Yes COOLANT Tank capacity: 55 L Pump capacity: 10 L/min Pump pressure: 1.7 bar PNEUMATIC TAILSTOCK Quill taper: MT3 Quill outer diameter: 45 mm Quill stroke: 70 mm Adjustable thrust force: 25 – 260 daN All technical data is provided without obligation and subject to errors or omissions. Fully overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Headstock: Disassembled, cleaned, worn and defective parts replaced, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced and adjusted. New paint. Turret: Disassembled, cleaned, worn and defective parts replaced, newly painted, and mating surfaces skimmed. Tailstock: Lodpfx Afsx Upugs Ishb Disassembled, inspected, and overhauled. Newly painted. Hydraulics and pneumatics: Disassembled, motor checked, hoses and worn/defective parts replaced. X-axis: Disassembled, worn parts such as O-rings, seals, gaskets replaced. New ball screw and carriage installed. Z-axis: Disassembled, worn parts such as O-rings, seals, gaskets replaced. New ball screw and carriage installed. Electrical cabinet: Completely checked, various relays replaced. Paint: Colors: White RAL 9003 and Grey RAL 7011 Geometry in accordance with manufacturer's protocol. Various accessories checked and cleaned. Year: 2002