Salės Statyba pirkti naudotą (30 026)

Gamybos metai: 2011, būklė: labai geros būklės (naudotas), This is a complete plant for house construction. Prices for each item are listed individually. Comprising the following elements (see attached document): Images will follow and are already included in the attached document. Table 1 (Positioning and clamping the stud frame) €34,500 • Adjustable longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity Table 2 (Placing and fastening the first sheathing layer) €25,300 • Longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity Intermediate conveyor, 3 m length (parking bay for multifunction bridge) €4,600 • Longitudinal conveyor with 3 hinged belt conveyors Table 3 (Placing the second sheathing layer, fastening, and flipping the element onto the next table) €35,650 • Longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity • Hydraulic turning device Table 4 (Installation of electrical systems and insulation) €34,500 • Cross transfer with rollers and sheathing • Table cross-travel function • Connections for compressed air and electricity • Hydraulic turning device Table 5 (Placing the first sheathing layer and fastening the second side) €32,775 • Longitudinal conveyor with 3 hinged belt conveyors • Cross transfer with rollers • Pneumatic cross-clamping • Connections for compressed air and electricity Intermediate conveyor, 3 m length (parking bay for multifunction bridge) €4,600 • Longitudinal conveyor with 3 hinged belt conveyors Table 6 (Placing and fastening the second sheathing layer) €28,750 • Longitudinal conveyor with 3 hinged belt conveyors • Pneumatic cross-clamping • Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 • Longitudinal conveyor with 3 hinged belt conveyors • Hydraulic tilting unit • Table cross-travel unit • Overhead guide for holding the walls vertically Manual surface gantry with vacuum lifter on Table 2 (placing the first sheathing layer) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 3 (placing the second sheathing layer) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 5 (placing the first sheathing layer on the second side) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 6 (placing the second sheathing layer on the second side) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Wall storage 1: 12 m long, 24 bays €11,500 Wall storage 2: 12 m long, 20 bays Itjdpfju D Amgjx Abveg Vacuum lifter with column-mounted slewing crane €9,200 1 traverse, 2 t Abus €20,125 1 traverse, 2 t

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Blast container for blasting with glass beads, ceramics, corundum, chilled iron grit, garnet sand, etc. Blast container equipped with a fully covered screw conveyor floor and genuine abrasive recycling system. No sweeping, vacuuming, or shoveling of abrasive in the blasting chamber during the blasting process due to our closed-loop system. Itjdpfouwlzyox Abveg Abrasive cleaner: air separator with 4-way adjustable settings for air volume, flow speed, extraction proximity to the abrasive, and abrasive bed thickness. Electric vibrating screen for continuous removal of coarse contaminants. Bucket elevator with trapezoidal-thread spindle for belt tensioning and speed monitoring. Container lining made from 70 Shore, 4mm fabric-reinforced rubber for a service life of up to 30 years with proper use. Container can be fully opened on the side for easy forklift loading. Container can be upgraded with a crane roof hatch, floor reinforcement, or lateral blasting chamber extension. For stainless steel blasting, the container can be upgraded with a genuine magnetic drawer or a drum-type magnetic separator as well as stainless steel grating. Filter unit with service doors for easy maintenance, big bag dust collection, secondary H13/14 filter, and silencer. Blast vessel with pressure regulator and water separator. The container stands out for its reliability and easy maintenance. All system components are easily accessible at the rear of the container. Only 4 ball bearings on the screw conveyor floor and 4 ball bearings on the bucket elevator. Special 5-year warranty included on all key components of the blasting system. Safety features: door/gate limit switches, dead-man control, emergency lighting, viewing window in the blasting chamber, emergency stop inside the blast chamber and externally on the control cabinet, quick pressure relief for the blast vessel.

Būklė: naujas, Gamybos metai: 2025, Extraction floor, waffle base for mineral blasting media approx. 7000x4200mm, without grating cover, with suction nozzle and collection boxes. For any questions regarding technical specifications, please contact us in writing or by phone. Ijdpfxsdz Ayvo Abvstg The machines are based on manufacturing at the Grossenlüder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with the long-standing, well-known contacts.

Būklė: beveik kaip naujas (naudotas), rida: 80 km, galia: 109 kW (148,20 AG), pirmoji registracija: 11/2025, kuro tipas: dyzelinas, bendras svoris: 3 500 kg, krovimo vietos ilgis: 3 500 mm, krovinių skyriaus plotis: 2 200 mm, krovos erdvės aukštis: 2 300 mm, Įranga: ABS, oro kondicionavimas, oro pagalvė,

Gamybos metai: 2002, būklė: geras (naudotas), mašinos/transporto priemonės numeris: HHNRW, Demag / CTI Monorail System with 7 Demag DH Hoists (Pan Transport System of an Aluminum Foundry) Payload / Lifting Capacity: 6,300 - 7,000 kg / 6.3 + 7 t Approx. 100m running rail (CTI profile - modular system) without supporting hall structures, etc. 9 pneumatic switches, curved sections, various distributors, control cabinets, and pneumatic controls included Documentation including wiring diagrams and inspection books available The hoists can be moved individually along the rail system; each hoist has its own control unit, including conductor rail system for power supply to the hoists Complete two-stage travel – precision lift! Used condition – system was serviced/overhauled in 2018 for €155,000 (running rails / hoists) Iedpfx Aoh Ad Saobvotg System is dismantled and available immediately (scope of delivery approx. 20-25 tons, about 2 truckloads) Additional photos available upon request – please inquire Shipping by freight carrier possible, collection preferred Freight costs within a 500 km radius €1,400. Please request exact costs by postal code!

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2014, New and unused Adjustable hydraulic pump Ijdpfow H Ad Esx Abvetg Manufacturer: Herrenknecht Type: AL A4VS0 250 LR2DY / 30R-V2B250U34 Pressure: 270 bar Power: 132 kW

Gamybos metai: 2019, būklė: naujas, CANUSA CPS MIS-65 / MIS 100 Isdpfxjih R Ics Abvotg Schwarzrohrgröße: 1220 mm - 48 Zoll Manschettenbreite: 650 mm - 26 Zoll MIS - 65 1120 - 650 CW BK/T SP 127030 - 12200650026-040 Baujahr: 2019, NEU Preis pro Karton! Ca. 200 Verpackungseinheiten (Karton) verfügbar.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Įranga: galinis keltuvas,

Būklė: naudotas, Gamybos metai: 1979, mašinos/transporto priemonės numeris: Res BS, Demag PK2 chain hoist crane lifting unit 250kg / 500kg Approx. 40 units available!!! 250kg / 0.25t load capacity / lifting capacity – single-fall – €500 500kg / 0.5t load capacity / lifting capacity – double-fall – €600 With 2 lifting speeds, lifting height approx. 3–4m Complete with control pendant and load hook Ijdevzkylspfx Abvstg Total weight approx. 40kg, connection to 380V 50Hz Top condition, fully functional. Not a worn-out or used-up device! Just connect and start using. Taken from ongoing operation. Item location: 75053 Gondelsheim See pictures

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, tuščias svoris: 8 400 kg, didžiausias leistinas svoris: 30 600 kg, bendras svoris: 39 000 kg, ašių konfigūracija: 3 ašys, pirmoji registracija: 06/2007, krovimo vietos ilgis: 13 500 mm, krovinių skyriaus plotis: 2 550 mm, krovos erdvės aukštis: 850 mm, bendras ilgis: 13 500 mm, bendras plotis: 2 550 mm, pakaba: oras, padangos dydis: 245.70 R 17.5, klirensas: 850 mm, spalva: šviesiai mėlyna, priekabos stabdys: priekaba su stabdžiais, Gamybos metai: 2007, Įranga: ABS,

Būklė: geras (naudotas), Reznor UDSA Gas Warm Air Heater UDSA Gas Warm Air Heater – efficient to the highest level The most renowned unit from REZNOR is the UDSA gas warm air heater, which ensures uniform air distribution in industrial halls. This easy-to-install recirculation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and an exhaust fan. The combustion air can be supplied either as standard from outside or from within the installation room. The UDSA warm air heater from REZNOR guarantees uniform air distribution in the heated hall. Its patented heat exchanger sets new standards for airflow and heat transfer, achieving an efficiency of over 92%. UDSA: compact, revolutionary, and trendsetting. This new generation of units allows halls to be heated in a particularly economical way—directly, that is, without a central heating system—using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas Warm Air Heater. The advantages: - Efficiency of more than 92% - Also suitable for vertical installation - Low NOx emissions - Innovative combustion concept - Quiet operation - CE system certification, type B or C - Compact design for easy installation - Uniform heat distribution - Standard fitted vertical and horizontal air distribution fins - Modulation of heating output down to 50% - EC technology - ErP Ready Itjdpjx Ihg Iofx Abveg These units are direct-fired gas warm air heaters (WLE) with fan-assisted atmospheric multi-gas burners. Installation and gas/flue connection must only be carried out by an authorized installation company. These gas warm air heaters are suitable for: - Operation with natural gas or LPG - Recirculating air operation - Inlet air temperature below 5°C with stainless steel heat exchanger* - One-stage or two-stage* heat operation via room thermostat and control switch Heating - Ventilation° control via ECOtronic TN-L° with day/night/week program - Flue gas discharge via roof, type B or C° - Flue gas discharge through external wall, type C° Gas WLE type: UDSA025-3 Gas device type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max rated heat input (Hs) QN: 30.08 kW Max rated heat input (Hi) QN: 27.75 kW Max rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m³/h Protection class: IP20 Find more items—new and used—in our shop! International shipping costs on request!

Būklė: geras (naudotas), Reznor UDSA Gas Warm Air Heater UDSA Gas Warm Air Heater – Efficient Performance to the Highest Standard The most well-known unit from REZNOR is the UDSA gas warm air heater, which ensures even air distribution in industrial halls. The easy-to-install recirculation unit is available in 14 output sizes ranging from 7 to 97 kW and consists of a heat exchanger, gas burner, and an exhaust fan. The combustion air can be supplied either from outside (as standard) or from the installation room. The REZNOR UDSA warm air heater guarantees uniform air distribution throughout the heated hall. Its patented heat exchanger sets new benchmarks regarding airflow and heat transfer, achieving an efficiency of over 92%. UDSA: compact, revolutionary, and trend-setting. This generation of equipment enables particularly economical hall heating directly (i.e., without central heating) using decentralized, modulating gas warm air heaters. REZNOR UDSA Gas Warm Air Heater – Key Benefits: - Efficiency level of more than 92% - Suitable for vertical mounting - Low NOx emissions - Innovative combustion concept - Quiet operation - CE system certification, B and C versions - Compact design for simple installation - Even heat distribution - Supplied with vertical and horizontal air deflection louvres as standard - Heating output modulation up to 50% - EC technology - ErP Ready These units are direct-fired gas warm air heaters (WLE) equipped with fan-assisted atmospheric multi-gas burners. Installation and gas/flue connection must only be performed by an authorised installation company. The gas warm air heaters are suitable for: Iodpfxex Ihiis Abvetg - Operation with natural gas or LPG - Recirculating air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Single-stage or two-stage* heating operation via room thermostat and heating control switch - Ventilation° regulated via ECOtronic TN - L° with day/night/week program - Flue gas discharge via roof, type B or C° - Flue gas discharge through the exterior wall, type C° Gas Warm Air Heater Type: UDSA015-4 Appliance Category: B22P-C12-C32-C52-C62-C82 Designation: DE Gas Category: I2ELL Gas Type: G20 natural gas Inlet pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. rated heat input (Gross) QN: 17.60 kW Max. rated heat input (Net) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air flow rate: 1360 m3/h Protection class: IP20 More new and used items in our shop! International shipping costs on request!

Būklė: geras (naudotas), DIGI SM-5500B System Scale The SM-5500B is the advanced PC-based system scale printer that provides you with multiple retail solutions. It increases operational turnover and optimizes workflow with integrated queue and combined systems, thanks to various innovative features of the SM-5500B. Experience real retail solutions delivered by DIGI’s PC scales. • Linerless printing with integrated automatic cutter • Watermark printing • Speed ID • InfoTag and electronic shelf labeling (e.Label) • Integrated queue and combined system • Waste management • Interactive screen display Itsdok Shm Topfx Abvsg Power supply: 230 V (50/60 Hz) Operating humidity: 15% – 85% RH non-condensing Operating temperature: -10°C to +40°C Operator display: 12.1" Customer display: 7" WVGA (800x480) Interface: RS232C, Ethernet (standard) Maximum: 15/30 kg, minimum: 100 g, e = 5/10 g Dimensions (mm): 385 (W) x 507 (D) x 148 (H) Item condition: used Photo is for illustration purposes only More items – new and used – can be found in our shop! International shipping costs on request!

Būklė: geras (naudotas), ApenGroup LRP28DE dujų šiltas oro generatorius Itsdpex Ihlkofx Abvog Dujų rūšis: G20 gamtinės dujos Prisijungimo slėgis: 20 mbar Nominali šiluminė apkrova QN: 27 kW Nominali šiluminė galia: 24,63 kW Maitinimo įtampa: 230V 1N, 50Hz Oro srautas: 2700 m3/h Apsaugos klasė: IP20 Daugiau naujų ir naudotų prekių rasite mūsų parduotuvėje! Tarptautinio pristatymo kaina pagal užklausą!

Gamybos metai: 2016, būklė: beveik kaip naujas (parodų įrenginys), mašinos/transporto priemonės numeris: KBK FFM, DEMAG KBK 2 - Crane Ceiling Crane Runway Indoor Crane The images show an example crane runway with the components listed below. These components are also available individually! Please inquire about your crane runway according to your specific dimensions. Working/load capacities from 80, 125, 250, 500 up to 1000 kg. KBK 2-R switches left and right (with conductor line) KBK 2-R slewing discs 890mm (with conductor line) KBK 2-R curved rails 15, 30, 45, 60, 90 degrees (with conductor line) KBK 2-R rails (with conductor line) The system can be supplied complete according to your requirements. Rails, rail connectors, trolleys, end plates, cable trolleys, brackets/hangers, accessories are in stock. Ijdpemmbn Tjfx Abvotg Chain hoists available on request. Very good, almost as-new condition. Shipping by freight forwarder possible. Demag KBK1, KBK2, and KBK3 rails available from stock!

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, bendras svoris: 95 kg, Įranga: Tipinė plokštelė prieinama, dokumentacija / vadovas, Suction capacity of filter unit at connection*: 2200 m³/h (free-blowing) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Noise level*: 65 dB(A) Dimensions (L/W/H) in mm: L 1623 / W 508 / H 545 Colour: RAL 7035 Weight: 91 kg Manufacturer: ISI Industrieprodukte GmbH *Dependent on filter configuration Special voltages and colours available on request Filter configuration*: - 40 mm aluminium mesh pre-filter (optional/retrofit: PrePac pre-filter package) - 1 piece electrostatic filter cell - 20 mm aluminium mesh after-filter (optional: 40 mm after-filter range) OPTIONAL: Multiple pre-filter packages possible Application: Horizontal electrostatic air cleaner with EC radial fan for the removal of oil mist, emulsion mist and smoke from hall air in recirculation mode. Vertical raw air intake via suction manifold with suction nozzle. Clean air recirculation via adjustable diffusion grille. Your benefits with the ELBARON series: - 6 device variants available - Direct from manufacturer - Electronically controlled EC fan as standard - Adjustable speed and air flow capacity Itodpfx Aoum Uzajbvjg - Available as simplex (single-stage) or duplex (two-stage) - Wide range of air capacities available - Can be adapted to pollutant load and required air output - Large range of installation and connection accessories available - Quality Made in Germany We developed the hall extraction system as an economical alternative to costly central extraction systems or elaborate single-machine extraction units. This allows you to protect your employees’ health and maintain your facility without large investments. We designed the ELBARON® filter series for use in machining operations with pure oil and for the separation of oil mist and smoke (oil mist separators). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most powerful filter units on the market and are in use worldwide.

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, FRUIT SHELF VEGETABLE SHELF SALES DISPLAY IN TOP CONDITION used & good Our offer is aimed at dealers, commercial businesses, and public institutions. Item no.: VKRegal Manufacturer: unknown Item used and in good condition Dimensions: 245 x 100 x 150 cm (W x D x H) Price quoted is per fruit shelf double module, 2.45 m in length, for collection from warehouse 47441 Moers. Price refers to one double shelving unit with neutral advertising panel – as shown in the original photo. Inspection is expressly offered. Further equipment in stock see photos or enquire by phone. General Information: We offer items here from various liquidations, which we describe as accurately as possible and provide with informative photos. Further details about the item cannot be provided. Viewing is possible by appointment on Tuesdays and Thursdays between 9 am and 4 pm by prior telephone arrangement. The item can be taken away immediately if required. We can only respond to enquiries about this item if you provide a telephone number due to time constraints. Unless explicitly stated otherwise, this is a USED ITEM. Items have been visually inspected and are in technically good order as far as possible. Isdpfer Dtg Tex Abvjtg All prices stated are net prices. All offers ex warehouse 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. all dimensions are approximate

Gamybos metai: 2018, būklė: labai geros būklės (naudotas), A REAL EYE-CATCHER Please note: Due to time constraints, we can only respond to inquiries that include a telephone number. We are offering here a used salad bar / saladette / fresh food counter / self-service counter: - Plug-and-play with built-in refrigeration unit - Cover is easy to raise and lower via ropes - With tray shelf on the customer side Manufacturer: GSK Year of manufacture: ca. 2018 Model designation: see photos Weight: total approx. 358 kg Dimensions: Height: 155 cm Width: 208 cm Depth: 100 cm (incl. customer shelf) * Plug-ready * Separate refrigeration unit * Generous storage space * Fitting for cutlery holder * Tray storage compartment * With lighting Temperature cools down to 0.6°C and, as set by us, switches back on at approx. 3.5°C. Collection from warehouse 47441 Moers. Inspection is expressly offered. More equipment in stock. If you wish to receive an offer, please note the following: For offer preparation we require a complete billing and delivery address as well as a telephone number. An email address is also essential, as we unfortunately cannot send offers via Machineseeker. We will then prepare a quotation for you. Our bank details will be included with the offer. If you would like to accept the offer, please make payment and we will dispatch the item immediately upon receipt of payment. An invoice will be sent to you automatically. If you have any further questions, please contact us. Best regards JS Trading GmbH Iodpfx Abjh Uxd Iovjtg General: We offer items from various business closures described as accurately as possible, along with detailed photos. No further information on the item can be provided. We offer inspections by appointment on Tuesdays and Thursdays from 9:00 am to 4:00 pm. Collection can be arranged immediately if required. Unless explicitly stated otherwise, the item offered here is used (from business closure). Items have been visually inspected and are, as far as we can tell, in order. Please see the photos. Functionality test conducted – result OK. All offers ex warehouse 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. For your information: Packaging and shipping costs amount to €490 net due to the elaborate packaging required. Collection is likely to be more cost-effective in any case. Feel free to call if interested. All measurements are approximate. You can find more offers from gastronomy, warehouse technology, trolleys, etc. in our shop. Photos similar.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2016, For sale: 10 high-quality aluminium tent halls from 2016, model LX1200.320.T.100.001_E, renowned for their exceptional stability, durability, and versatility. These modern tent halls are the perfect solution for a wide range of applications, including warehousing, workshops, exhibition spaces, event tents, and more. PRODUCT FEATURES: Model: LX.1500.520E.S100.P252 Itodpsv N Txgjfx Abveg - Double-skin PVC thermal membrane - Frame material: Robust aluminium – corrosion-resistant and lightweight, ideal for permanent or temporary installation Dimensions: - Length: 50 m - Width: 12 m - Ridge height: 5.20 m - Internal clear height from base plate: 3.25 m - Truss spacing: 5 m - Roof panel thickness: 10 cm / wall panels: 6.5 cm - Structural calculations available - Tent inspection can be renewed if desired - Roof tarpaulins have been cleaned once - Halls have been dismantled and are commission-packed - Roof material: High-quality double thermal membrane, UV-resistant PVC tarpaulin, water-repellent, weatherproof, and highly durable - Flooring: Optional floor structure or anchoring available as required - Colour: Standard in white - Weather resistance: High wind and snow load tolerance – ideal for year-round use - Certifications: Complies with all relevant wind and snow load standards, certified according to European standards - Snow load zones 1–3 SPECIAL ADVANTAGES: - Lightweight: Thanks to the aluminium frame, the tent hall is especially light and easy to transport and assemble, without compromising stability. - Flexibility: Quick and easy assembly – ideal for both temporary and permanent use. - Versatility: Suitable for a wide range of applications such as event tents, warehouses, workshops, exhibitions, sales areas, or as emergency accommodation. Price on request – We will prepare a customised quotation for you. Conclusion: The LX1200.320.T.100.001_E aluminium tent hall is the ideal solution for anyone seeking stable, cost-effective, and long-lasting shelter. Its versatile application possibilities and user-friendly handling make it an excellent choice for companies looking for fast and flexible solutions. Viewing and further information: You are welcome to view the tent halls or request more technical details.

Gamybos metai: 2022, būklė: beveik kaip naujas (parodų įrenginys), Oro apdorojimo įrenginys su EC technologija salės klimato reguliavimui ar šildymui, vėsinimo galia kartu su šaldytuvu 150 kW prie 7/12°C, šilumos galia 300 kW, oro kiekis 20 000 m³/h, 4x500 mm oro išleidimo angos, kompaktiška konstrukcija. Itodpfx Abefzrgyoveg

Gamybos metai: 2003, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: MBUT136, ! Bargain Price ! Price from €1,150 R.Stahl Single-Girder Suspended Crane | Bridge Crane | Crane Runway | Indoor Crane | Gantry Crane Load Capacity: 250 kg 7 cranes available: 4: Steel Suspension Crane, 250 kg capacity, width 6.35 m, gauge 5.6 m 5: Steel Suspension Crane, 250 kg capacity, width 2.65 m, gauge 1.9 m 6: Steel Suspension Crane, 250 kg capacity, width 4.85 m, gauge 4.35 m 7: Steel Suspension Crane, 250 kg capacity, width 2.90 m, gauge 2.35 m 9: Steel Suspension Crane, 250 kg capacity, width 6.0 m, gauge 5.5 m Itsdpfxeigl R Rs Abvsg 10: Steel Suspension Crane, 250 kg capacity, width 1.03 m, gauge 0.74 m (1,150 Euro) 11: Steel Suspension Crane, 250 kg capacity, width 1.65 m, gauge 1.25 m Gauge can be adjusted, end carriages are bolted with 8 bolts. Runway rails (IPE 200 – not available) Trolleys are adjustable to fit the girder dimensions. Including complete control system, pendant control via pushbutton station. All cranes are fully electrically traversable in all 3 axes Lifting height/hook travel approx. 4 m Connection: 400V 16A, Year of manufacture: 2003 Very good condition, systems were only used for maintenance – hardly used Shipping by freight forwarding, collection preferred Location: 75053 Gondelsheim Please inquire for shipping costs by postcode – we will provide you with a prompt, non-binding offer!

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1989, mašinos/transporto priemonės numeris: ROD431+432, ABUS Kranų pakaba, kranų bėgis, tiltinis kranas, salės kranas, kranas Kranas yra 2x identiškas !! Naudingoji apkrova / kėlimo galia 1 t – 1000 kg Vėžė 11250 mm, išorinis matmuo apie 11500 mm Pagamintas 1989 m. su grindiniu valdymu Kėlimo aukštis 6 m Kėlimo mechanizmas GM1010 F6 Statybos aukštis nuo krano viršaus iki kablio apie 610 mm (320 mm sija + 290 mm kėlimo mechanizmas) Galvutės ilgis su bamperiu apie 228 cm Kranas išmontuotas ir iš karto prieinamas Iodpfxexdvncs Abvotg Labai gera būklė, yra patikrinimo knyga Taip pat yra stulpų sukamieji kranai ir sieniniai sukamieji kranai Demag KBK ir Abus HB sistemos, taip pat Errikla, Hadef, Stahl KT 2000 ir kt. Siuntimas per ekspediciją galimas, prašome teirautis pagal pašto kodą Pageidautinas atsiėmimas

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1991, mašinos/transporto priemonės numeris: KA20+23, ABUS kranų danga, kranų bėgiai, tiltiniai kranai, salės kranas, kranas Yra 2 vienodi kranai!! Papildomai galimos 2x 20 m ilgio bėgių HEA220, 4 atramos (lango pusė) bei 20 m Vahle srovės bėgių Naudingoji apkrova / kėlimo galia 1 t - 1000 kg Vėžės plotis 9500 mm, išorinis matmuo apie 9750 mm Pagaminimo metai 1990 su grindų valdymu Kėlimo aukštis 6 m Kėlimo mechanizmas GM grandininis keltuvas, pakėlimo aukštis 4 m Konstrukcijos aukštis nuo krano viršaus iki kablio ~600 mm Galvutės nešiklio ilgis su buferiu apie 220 cm Kranas išardytas ir iškart prieinamas Labai gera būklė, yra patikros knyga Taip pat yra koloninių sukamųjų kranų ir sieninių sukamųjų kranų Demag KBK ir Abus HB sistemos, taip pat Errikla, Hadef, Stahl KT 2000 ir pan. Ijdpfxoxdv Nme Abvotg Pristatymas per transporto įmonę galimas, teiraukitės pagal pašto kodą Pageidautina atsiimti vietoje

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1999, mašinos/transporto priemonės numeris: TH241-14/433886, veikimo valandos: 131 h, ABUS ELV krano traversa, kraninis kelias, tiltinio tipo kranas, gamybinės patalpos kranas Naudingoji apkrova / kėlimo galia: 5 t – 5000 kg Kelio plotis: 13500 mm, išorinis matmuo apie 13700 mm Pagaminimo metai: 1999, su grindiniu valdymu Kėlimo aukštis: 6 m Konstrukcinis aukštis nuo krano viršaus iki kablio apie 1020 mm (sija 540 mm + kėlimo mechanizmas 480 mm) Galinės sijos ilgis su buferiu apie 270 cm SWP: išnaudotos pilnos apkrovos valandos – 131, teorinis likusios eksploatacijos laikas – 1469 val. Kranas išardytas ir iš karto prieinamas Labai gera būklė, yra techninės priežiūros žurnalas Taip pat yra koloninių ir sieninių sukamųjų kranų Demag KBK ir Abus HB sistemos, taip pat Errikla, Hadef, Stahl KT 2000 ir kt. Itjdpfx Ajx Ev Tkjbveg Siuntimas per ekspeditorių įmanomas, prašome teirautis pagal pašto kodą Pageidautina atsiimti vietoje

Būklė: naudotas, Gamybos metai: 1985, mašinos/transporto priemonės numeris: KA, Demag Overhead Crane, Gantry Crane, Bridge Crane incl. Steel Structure + Floor Control Steel structure approx. 10x3.5 m with Demag KBK I crane runway with one bridge Iedpfsw Hniyjx Abvjtg Load capacity/lifting capacity: 1x 125 kg, incl. 1x 80 kg Demag PK Manulift chain hoist Technical data of the system: Crane runway/steel construction consisting of HEB100 beams Length outer edge of steel structure: approx. 9.5 m Total width outer edge (steel structure): 3.45 m Inner edge of steel structure: 3.3 m Total height steel structure/crane: 3 m Column height approx. 3 m with base plate Bottom edge of running rails: 2.7 m Top edge of bridge: 3.95 m Bottom edge of bridge: 2.45 m Hook height: 1.75 m (Manulift) Track gauge: approx. 3 m Rail length: approx. 10 m Column spacing: see drawing (4.75 m + 4.75 m) System will be delivered complete: - Complete steel structure with columns - Demag KBK 1 system incl. chain hoist Crane is dismantled and immediately available Location is 75053 Gondelsheim Very good condition, see pictures Shipping by freight forwarder or collection by appointment only