Prispaudimo Veleno Ekrano pirkti naudotą (7 458)

Sąlyga: naudotas, Technical details: Table length: 1100 mm Table width: 800 mm Table height: 100 mm Number of T-slots: 3 T-slot spacing: 300 mm Machine weight approx.: 650 kg T-slots according to DIN 650 and 508 - Width a: 30 mm - Width b: 50 mm - Height c: 30 mm - Height h: 50 mm Kdedpsu Nkluefx Af Iog

Sąlyga: naudotas, Technical Details: Kdedpfx Asu Sq Ubef Isg Width: 1300 mm Depth: 1000 mm Height: 1600 mm Machine weight approx.: 1950 / 1860 kg per piece 3 pieces available (price per piece) According to DIN 650: T-slot width a = 27.5 mm; h = 55 mm; b = 49 mm; c = 21 mm; distance between T-slots 200 mm Clamping surface: W: 1300 x H: 1600 x Thickness: 63 mm When making your inquiry, please specify the number of clamping angles required.

Sąlyga: naudotas, Technical details: Plate length: 2600 mm Plate width: 380 mm Plate height: 115 mm Plate thickness: 115 mm Machine weight approx.: approx. 0.4 t / per plate Transport dimensions LxWxH: approx. 2.6 x 0.38 x 0.2 m / per plate A total of 3 plates are available for sale (price per plate). These plates can be assembled into a single plate table. Material: Steel, milled surface Longitudinal slot quantity: 2 (a=36 mm, h=48 mm, b=60 mm, c=24 mm) Center distance: 160 mm Base fastening, quantity: 4, size D=32 mm x 45 mm, countersunk D70x65 mm Drilling on front face, quantity: 1/front, M20, centrally located Kdodpfx Aoval Emsf Ijg

Sąlyga: naudotas, Technical details: Plate length: 4900 mm Plate width: 1460 mm Plate height: 300 mm Plate thickness: 300 mm Machine weight approx.: 5.3 t / per plate Transport dimensions LxWxH: approx. 4.9 x 1.5 x 0.3 m / per plate Two plate units are available for sale. Material: cast steel T-slots according to DIN 650: a=58; h=108; b=110; c=50 mm Center distance: 295 mm Kdsdpfsval Hqsx Af Ieg 6 through-holes Ø 40 mm On one plate, 2 slot areas are broken out at the front end.

Sąlyga: naudotas, Technical details: Length: 1020 mm Width: 810 mm Height: 625 mm Approx. machine weight: 1070 kg Boring cube made of cast steel. Surface with significant drilling inclusions. T-slots according to DIN 650 - Clamping surface, vertical: L x D: 1020 x 625 mm - Clamping surface, horizontal: L x W: 1020 x 810 mm Kdjdpfxev Ddune Af Isg

Sąlyga: naudotas, Technical details: Plate length: 3000 mm Plate width: 1775 mm Plate height: 350 mm Material of the plate: Cast steel. 7 T-slots according to DIN 650 a=35 mm; h=60 mm; b=62 mm; c=26 mm; Center distance: 250 mm Kedsu N Dglepfx Af Ijdg The clamping plate is equipped with side mountings on the longitudinal side and front side.

Sąlyga: naudotas, Gamybos metai: 1999, Technical details: Plate length: 5,500 mm Plate width: 1,500 mm Plate height: 250 mm Machine weight approx.: 6.5 t Space requirement approx.: 5.5 x 1.5 m - Slot distance (T-slots) = 542 / 500 mm with parallel offset arrangement - T-slot according to DIN 650 - a = 28.0 mm; h = 48.0 mm; b = 48.0 mm; c = 22.0 mm - Including adjustment screws and cover caps Kedpfx Aju N Dnvof Iedg In stock.

Sąlyga: naudotas, Gamybos metai: 1979, Technical details: Plate length: 6,400 mm Plate width: 1,870 mm Plate height: 415 mm Machine weight approx.: 8,600 kg Transport dimensions (LxWxH): 6.4 x 1.9 x 0.42 m Kedpfxsu N Dqds Af Isdg Cast steel plate - T-slot according to DIN 650 - a = 36 mm; h = 69 mm; b = 59 mm; c = 25 mm; slot spacing 315 mm - Incl. cover plates Ø 147 x 3 mm

Sąlyga: naudotas, Technical details: Length: 640 mm Width: 800 mm Kodpfx Aeu N Dwdof Ijdg Height: 1000 mm Depth: Depth/Length: 640 mm Machine weight approx.: 570 kg Clamping surface is roughly machined Good used condition, minor signs of use (without clamping elements) T-slots according to DIN 650: a = 28 mm; b = 49 mm; c = 21 mm; h = 50 mm Distance between T-slots: T-slot to T-slot = 160 mm

Sąlyga: naudotas, Technical details: Machine weight approx.: on request kg These clamping devices are sold at a price per kg when purchased as a complete lot. Please refer to the identification on the photos! Kdsdpfxsu N D N He Af Isg *

Sąlyga: naudotas, Technical details: Width: 1005 mm Depth: 506 mm Height: 1150 mm Approx. machine weight: 911 kg Kdodpfxou N D U Ns Af Ieg Design of vertical clamping surface: H: 1150 mm; W: 1005 mm; Surface finish: fine-machined, 49 threaded holes M24; 7 semicircular recesses Ø 100 x 82 mm on each side Design of clamping surface (base): L: 506 mm; W: 1005 mm; 4 clamping slots Ø 30 x 100 mm

Sąlyga: naudotas, Technical details: Width: 250 mm Depth: 180 mm Height: 250 mm Kedpfx Afju N Eb De Ijdg Approx. machine weight: 30.0 kg 2 units available (price per unit) (No. 1104021 A is slightly narrower)

Sąlyga: naudotas, Technical details: Width: 300 mm Depth: 150 mm Kedpfou N Ecnsx Af Iedg Height: 340 mm Approx. machine weight: 31 kg T-slots according to DIN 650: a = 14 mm

Sąlyga: naudotas, Technical Details: Weight: 150 kg Dimensions: L:280 x W:240 x H:180 mm / per clamp jaw For sale are these 4x clamping jaws. Application: Workpiece clamping device for turning and drilling operations Kdodju N E Azjpfx Af Ieg Steel cast construction Workpiece reception: Clamping surface WxH: 70 x 65 mm, internal and external clamping, clamping range 250 mm Base mounting: Surface L x W: 280 x 240 mm, 4x clamping bolts M24 Equipment: 4x T-slot bolts per clamping jaw and socket wrench for 24 mm square drive

Sąlyga: naudotas, Techniniai duomenys: Stalo ilgis: 500 mm Stalo plotis: 300 mm Plotis: 500 mm Gylis: 300 mm Aukštis: 400 mm Matmenys I-P-A: 500 x 300 x 400 mm Svoris: apie 55 kg su išilginėmis angomis Pagaminta iš plieno liejinio Paviršius apdirbtas (semi-finished) Kdjdpfx Ajwbhdmsf Ijg

Sąlyga: naudotas, Technical details: Swing diameter over bed: 350 mm Swing diameter over cross slide: 200 mm Turning length: 560 mm Kdedpfxovadd Ie Af Isg Centre height: 170 mm Spindle bore: Ø 32 mm Speed range: 36...1,800 / 8 steps rpm Feed range x-axis (longitudinal): 0.02–0.8 m/min Feed range y-axis (cross): 0.01–0.4 m/min Tailstock quill taper: MT 4 Tailstock quill stroke: 140 mm Total connected load: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions approx. LxWxH: 2.1 x 1.1 x 1.4 m Mikromat precision lathe - Longitudinal slide travel = 580 mm; Cross slide travel = 170 mm; Top slide travel = 130 mm - Workpiece clamping via 3-jaw chuck Niles Ø 160 mm, speed 2,800 rpm - Tool holder: Multifix quick-change toolpost Equipment: Coolant pump 4 machine levelling feet Copying device

Sąlyga: naudotas, Technical Details: Plate length: 2990 mm Plate width: 1990 mm Plate height: 190 mm Plate thickness: 190 mm Machine weight approx.: approx. 7.0 t per plate Kdsdpfxoval H Re Af Ieg Transport dimensions (LxWxH): approx. 3.0 x 2.0 x 0.2 m per plate 2 plates available for sale. Material: Cast steel Surface: machined/finish milled T-slots according to DIN 650: 8 x large T-slots: a = 36 mm; h = 70 mm; b = 55 mm; c = 25.5 mm 7 x small T-slots: a = 28 mm; h = 38 mm; b = 47 mm; c = 21 mm Center distance: 123 mm 9 x through holes Ø 80 mm 6 x through holes Ø 33 mm

Sąlyga: naudotas, Gamybos metai: 1963, Technical details: Swing diameter over bed: 1000 mm Swing diameter over cross slide: 620 mm Turning length: 3150 mm Centre distance: 3150 mm Swing diameter in gap: 1200 mm Gap length: 800 mm Approx. machine weight: 11.5 t Approx. machine dimensions (LxWxH): 7.5 x 1.5 x 1.7 m Including 2 steady rests and various centres Kdsdpfx Afju Ix Ars Iog

Sąlyga: naudotas, Gamybos metai: 1974, Technical details: Swing diameter over bed: 500 mm Swing diameter over support: 300 mm Turning length: 2100 mm Centre distance: 2000 mm Spindle bore: approx. Ø 60 mm Speed range: 35.5 - 1800 / 18 steps rpm Rapid traverse x-axis (cross slide): 4.2 m/min Tailstock quill taper: MT 5 Tailstock quill stroke: 180 mm Control voltage: 220 V Machine weight approx.: 3.25 t Machine dimensions approx. LxWxH: 3.5 x 1.2 x 1.6 m Thread cutting possible, e.g. metric thread, module thread and imperial thread Rapid traverse cross slide Kdjdpfou Ix Dcox Af Ieg Chuck guard 2x chip trays Accessories: (see similar in photo) 2x steady rests (1x closed, 1x open) Faceplate 3-jaw chuck Jaw sets Flange Centres Various gears

Sąlyga: naudotas, Gamybos metai: 1975, Technical details: Kdodpeu Ix E Hefx Af Ieg Swing diameter over bed: 400 mm Swing diameter over support: 220 mm Turning length: 1,100 mm Centre height: 180 mm Spindle bore: Ø 45 mm Speed range: 31.5 - 1,400 rpm / 12 steps Feed range x-axis (longitudinal): 0.08 - 1.10 m/min Feed range y-axis (cross): 0.028 - 0.40 m/min Tailstock quill taper: MK4 Tailstock quill travel: 200 mm Total power requirement: 4.0 kW Machine weight approx.: 1.7 t Machine dimensions approx. LxWxH: 2.5 x 1.1 x 1.4 m Equipment: - Three-jaw chuck Ø 250 mm by Forkardt with reversible jaws - Multifix tool holder - Coolant system with pump - Chuck guard - Chip tray - Chip guard Accessories: - Chuck key - Tool holder - 2 gears

Sąlyga: naudotas, Technical Details: Plate length: 3,880 mm Plate width: 1,390 mm Plate height: 300 mm Kdodsu Nkl Iopfx Af Ijg Number of T-slots: 4 units Machine weight approx.: 3.2 t Space requirements approx.: L: 3.7 x W: 1.4 x H: 0.3 m Dimensions (L x W x H): 3.7 x 1.4 x 0.3 m Base plate from a former radial drilling machine T-slot size according to DIN 650 a = 28 mm b = 50 mm c = 24 mm h = 52 mm T-slot spacing = 250 mm

Sąlyga: naudotas, Technical details: Kdjdpju Nva Defx Af Isg Length: 1000 mm Width: 1100 mm Height: 610 mm Approximate machine weight: 1139 kg Drilling cube made of cast steel. T-slots according to DIN 650 - Clamping surface vertical: LxW: 1000 x 610 mm - Clamping surface horizontal: LxW: 1000 x 1100 mm

Sąlyga: naudotas, Gamybos metai: 1970, Technical details: Swing diameter over bed: 500 mm Swing diameter over support: 300 mm Turning length: 1000 mm Centre height measured on bed: 250 mm Centre distance: 1000 mm Speeds: 18...1800 / 21-step rpm Spindle bore: 56 mm Tailstock quill travel: 180 mm Kdsdpfsvvrpkex Af Iog Longitudinal feeds: 0.08 - 3.26 mm/rev Cross feeds: 0.04 - 1.63 mm/rev Rapid traverse X-axis: 4.2 m/min Total power requirement: 7.5 kW Machine weight approx.: 2.9 t Machine dimensions approx. LxWxH: 2.6 x 1.1 x 1.3 m 4-jaw chuck Ø 250 mm with internal jaws Live centre in tailstock 4-way quick-change toolholder Coolant system Accessories: Various reduction sleeves MK3-MK5-MK4 Live centre Drive dog 3-jaw chuck Ø 250 mm with internal jaws The machine does not comply with UVV (accident prevention regulations)!

Sąlyga: naudotas, Techninės detalės: Kdodpfx Aewtctgef Ieg Plokštės ilgis: 4600 mm Plokštės plotis: 1450 mm Plokštės aukštis: 300 mm Plokštės storis: 300 mm Apytikslis mašinos svoris: 7,2 t/plokštė 2 tvirtinimo plokštės (kaina už plokštę) Medžiaga: plieninis lietinys Paviršius: apdirbtas T-grioveliai pagal DIN 650: a=40; h=66; b=71; c=29 mm Ašių atstumas 300 mm 6 pragręžtos skylės Ø 41,0 mm

Sąlyga: naudotas, Technical details: Table length: 870 mm Table height: 420 mm Table width: 680 mm Machine weight approx.: on request t Dimensions (L x W x H): 0.91 x 0.71 x 0.42 m with base frame Kodeu N Dgxepfx Af Isdg -Center bore Ø 180 mm T-slots according to DIN 650: a=22 mm; h=38 mm; b=40 mm; c=16 mm with base frame, but also available without base frame on request