Prispaudimo kampas

Guss 1155/200/H160 mm

Būklė: labai geros būklės (naudotas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Working head safety cabin. Complete machine safety enclosure Infeed support table (workpiece support). Outfeed table (with conveyor belts) Workpiece feed with no. 3 conveyor belts (feed speed (m/min) max approx. 130) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Total installed power (kW) 99 Lhjdpjgwbbqjfx Agfod No. 2 WORKING UNITS (TOP): (SERVO-MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles 40) No. 3 WORKING UNITS (BOTTOM): (SERVO-MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + no. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue application and dowel insertion (right side) No. 8 injection nozzles for glue application and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Būklė: labai geros būklės (naudotas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness with veneer strips (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control/Software: ICOS Open Feed speed (m/min): 10 - 50, without transmission bar (Master & Slave systems) Stop cams retractable, distance (mm): 1080 FORMAT PROCESSING (per side): Protective cutter (pre-milling) 75.186 (1 x kW 4.4) Chipping unit (2 x kW 8) Lhedod Nt Rqspfx Agfjd Jointing milling unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): Gluing unit (hot melt adhesive) 283.1513 04.1570 + 283.205 Edge pressure zone – edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) Milling unit 08.055 (2 x kW 1) 0° - 30° Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servomotors Profile scraper unit 08.519 Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.617-4 (4 x kW 0.18) Universal milling unit for grooving/rebating and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Būklė: naujas, Gamybos metai: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Sound level: 70 dB Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Lsdpfxei Hplke Agfjhd Machine width: 1650 mm Machine height: 1100 mm Weight: 850 kg

Būklė: naujas, Tipas: 400C Obliavimo staklės: Stalo matmenys: 400 x 1800 mm Peilių veleno skersmuo: 70 mm Peilių veleno apsisukimų dažnis: 5700 aps./min. 3 peiliai: 400 x 20 x 3 mm Maks. stalo reguliavimo aukštis: 4 mm Storis: Stalo matmenys: 400 x 760 mm Maks. pjovimo gylis: 4 mm Padavimo greitis: 7 m/min Peilių veleno apsisukimų dažnis: 5700 aps./min. Maksimalus darbinis aukštis: 220 mm Minimalus darbinis aukštis: 4 mm Gręžimo ir kaltavimo funkcija: Stalo matmenys: 250 x 500 mm Lsdpfjd Nl Sfjx Agfehd Išilginis eiga: 205 mm Skersinis eiga: 95 mm Griebtuvas (SX): 16 mm Griebtuvo apsisukimų dažnis: 5700 aps./min. Variklis: 3 kW Priedai: serviso raktai, apsaugos ant kaltavimo griebtuvo, obliavimo liniuotė. Svoris: 390 kg

Būklė: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 - in solid strip mm max 1 Panel thickness (min/max) mm 14 / 60 (LASER - Max 50) Lhjdei Hn Srepfx Agfsd Control ICOS Open Feed speed m/min (adjustable) 6 - 30 Top pressure driven by V-belt Spray unit (for liquid release agent) Adjustable stop ruler CNC controlled Panel infeed system Jointing milling unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR glue + pre-melter) 283.201 + 283.203 Gluing unit (pre-melter with laser) Laser System LASERLINE Spray unit (for separating agent) Pressure zone + edge magazine for rolls (compartments no.) 36 + 12 End trimming unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0° - 25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Contour milling unit (for fine milling) CNC controlled KFA 30 (0.5 kW x 1) max 30 m/min Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Spray unit (for polishing liquid) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)

Gamybos metai: 1990, būklė: labai geros būklės (naudotas), used T-slot clamping angle plate Technical data: Dimensions Height: 1120 mm Lsdpfogwxmxsx Agfshd Width: 320 mm Slot width: 20 mm with - 7 horizontal T-slots used, in good condition

Būklė: labai geros būklės (naudotas), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control: NC 21 / HOMATIC Feed speed (variable) m/min: 15 - 50 Lhsdpshvi E Iefx Agfsd Safety and noise protection cabin Cam pitch (mm): 500 FORMATTING UNIT (for each side): Spray unit (for liquid anti-adhesive) Protection milling cutter (pre-milling) 1 x kW 4.5 Chipper KD 11 (2 x kW 6.6) LEFT SIDE: Universal milling unit (electropneumatically controlled) SF 20 (kW 6.6 x 1) 0°-90° RIGHT SIDE: Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + premelter) A3 + A34 Edge magazine for rolls (compartment No. 6). Edge pressure zone "A" (1 + 4 rollers) End trimming unit HL 04 (2 x kW 0.18) Pre-milling unit OPTIMAT (2 x kW 0.55) Multifunctional unit (radius and contour milling unit) FK 11 - 2 x kW 0.4 Multi-profile scraper unit PN 20 Flat scraper unit (pneumatic) Buffing unit (2 x kW 0.25)

Būklė: labai geros būklės (naudotas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 - 3 Edge thickness in strips (min/max) option: mm 20 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 250 / 3000 (approx.) Feed speed (adjustable) m/min: 12 - 40 (approx.) Safety and noise-protection cabin Cam spacing (mm): 500 FORMAT PROCESSING (per side): Spraying unit (for liquid anti-adhesive) Ledpfxek Nk R Do Agfshd Protective cutter (pre-milling) (1 x approx. 4 kW) Rough trimming unit (2 x approx. 5.8 kW) Universal milling unit 1 x approx. 4 kW EDGING UNIT (per side): Edging unit (hot-melt glue + premelter) Edge magazine for rolls (No. 2-fold) + edge pressure zone End trimming unit (2 x approx. 0.35 kW) Pre-milling unit (2 x approx. 1 kW) Milling unit (2 x approx. 0.5 kW) 0°-30° Multi-function unit (radius and contour milling) with 2 revolvers (8+8 positions) – max 27 m/min Universal milling unit for grooving/rebating and profiling 1 x approx. 4 kW (0° - 90°) Profile scraper unit + flat scraper unit + buffing unit

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINES – First (1st) machine in a line Edgebanding material (edges) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 230 / 1600 (approx.) Control/Software: WinEdge Feed speed (adjustable) m/min: 10 - 30 (approx.) Lhsdjl Hydmopfx Agfod Protective and soundproof enclosures FORMATTING UNIT (per side): No. 2 pre-milling units (2 x 5.8 kW approx.) No. 2 joint milling units, aft (2 x 4 kW approx.) EDGEBANDING SECTION (per side): Gluing unit (hot-melt glue + pre-melter) Pressure zone (CNC-controlled) Edge magazine for rolls (number of positions): 6 Pre-milling unit 08.055 (2 x 1 kW approx.) Milling unit (2 x 0.5 kW approx., 0°–30°) No. 5 universal milling units for grooving, rebating, and profiling (5 x 4 kW approx.) Profile scraper unit Flat scraper unit Spraying unit (for polishing fluid) Buffing unit + hot air unit – edge finishing

Būklė: naudotas, Gamybos metai: 2013, Numerical control PC Office with Widge Plus software Machine suitable for 1st and 2nd panel pass Motorized mobile support arm opening via N.C., 3200 mm Panel width min - max: 215 - 3200 mm Panel height min - max: 10 - 60 mm Edge thickness in roll, min - max (PVC-ABS): 0.3 - 3 mm Continuously adjustable feed speed: 10 - 40 m/min Motorized pressure belt Support conveyor with retractable pin Pin heights: 12 - 18 - 25 mm Distance between retractable pins: 500 / 400 mm Working units mounted on NC-motorized upper tables Squaring unit consisting of (each side): - Anti-adhesive group - Time-controlled splinter protection system Lhedpfx Aek Egvdegfod - Double pre-milling unit Edging unit consisting of (each side): - Gluing unit with premelter for PUR adhesive and premelter for EVA adhesive - Edge pressure rollers electronically controlled by N.C. - Edge tape magazine with 6 stations - Trimming unit with two motors - Overlapping end cutting unit - Staggered finishing group with two electronically NC-controlled motors - Corner rounding unit with 4 motors - 0-90° tiltable planing unit, electronically controlled by CN (mobile support arm) - 0-90° tiltable milling unit + double stacked milling spindle (fixed support arm) - Anti-adhesive groups - Edge scraper unit - Glue scraper group - Brushing group - Phon group