Pramonės Įmonės pirkti naudotą (4 004)

Būklė: naudotas, Vacuum Lifting Device for Paper Rolls NAGRON AEROLIFT Vacuum lifter for the paper industry Woudenberg, Holland Model R96-20 Serial No. 9745 Year of manufacture: 1999 Load capacity: 2,000 kg Centering mandrel diameter: 90 mm Suction surface outer diameter: 850 mm (plus seal) Suction surface inner diameter: 250 mm (minus seal) Seal width: 50 mm Suction surface area: 0.5 m² Vacuum: min. -800 mbar Suction capacity: approx. 100 m³/h per vacuum pump Motor power: 2 x 2.2 kW Connection: 400 Volt, 50 Hz Kodjdzqc Iepfx Aldsdn - 2 units Rietschle vacuum compressors, model VCE 100 Dimensions Ø x H: 1600 x 2250 mm Height with centering mandrel: 2500 mm Total height in transport frame: 2950 mm Net weight: 2.5 t.

Būklė: paruoštas naudoti (naudotas), The system includes a feed tank with agitator, extractor, centrifugal pump, seal water tank, wedge wire screen eluate line, wedge wire screen condenser, vacuum unit, condenser, plate heat exchanger, conveyor units V 3825 and V 3821, sight glasses and fittings, with documentation. Kdedpfx Aloiquuvsdjn

Būklė: paruoštas naudoti (naudotas), The system includes a feed tank with agitator, extractor, centrifugal pump, seal water tank, side channel pump, corner pipe screen eluent line, corner pipe screen condenser, vacuum unit, heat exchanger, condenser, feed unit V 3811 and 3811, sight glasses and fittings, with documentation. Kdsdpfx Ajiquurelden

Būklė: dilaminuotas dirbtuvėje (naudotas), B., VK26M (model series 1974) with powered outfeed table: - Main machine - Infeed table (powered) - Outfeed table - Control cabinet Including infeed and outfeed table, workshop inspected* - Debarking capacity: 10 cm - 61 cm diameter - 4 main separators - 4 cutting knives - Rotor speed: 235 rpm - Rotor opening: 65 cm - 30 kW motor, speed 1500 rpm - Feed speed: 17-42 m/min - Wood length: 3 m or longer Dimensions (without infeed and outfeed table) L = 9840 mm Kdjdpfx Aefn Iu Isldsn Infeed table: 3540 mm x 1000 mm x 1900 mm Main machine VK26M: 2530 mm x 2200 mm x 2350 mm Outfeed table (motorised): 3170 mm x 1000 mm x 1300 mm REFURBISHMENT: Pos 1: Dismantling, washing, sandblasting, priming and painting, repair, assembly Pos 2: Material for knife shafts on rotor, new bearings and seals (if required) Pos 3: 5 pcs. v-belts for rotor drive Pos 4: Gear oil Pos 5: Material: abrasives + paint Pos 6: 4 pcs. Valonkone peeling knives Pos 7: 4 pcs. Valonkone pre-separators Pos 8: Control cabinet - with 3-phase delta start for 30 kW main motor - with 3-phase delta start for 11 kW gear motor - with start for 4 kW gear motor (infeed) - with start for 4 kW gear motor (outfeed) - main starter - emergency stop

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Chip processing plant for the deoiling of all types of chips (we can adapt the system to your specific needs). With this system, coarse and disruptive parts are not a problem! The machines are patented and specially designed so that disruptive parts in the chips are automatically ejected. Included in the scope of supply: - SPYRA Chip Crusher ZE 2000 - AME hinged belt conveyor (between crusher and centrifuge) - SPYRA Chip Centrifuge 500H (can be replaced by the larger 600H centrifuge on request) - Additional discharge conveyor (available if required) Not included in this offer, but available as optional extras: - Lifting and tipping device (for fully automatic loading of the chip crusher) - Filtration unit (for filtering and reusing the oil from the chips) - Control cabinet Technical data for the SPYRA ZE 2000 chip crusher: Ksdeyzhdyopfx Aldjdn Total height with hopper approx. 2,318 mm Dimensions L x W approx. 1,500 x 800 mm Weight 2,000 kg Motor power 22 kW Voltage 400 V / 50 Hz Shredder arm speed 40 rpm Shredder arm torque 3,500 Nm Shredder hopper inner diameter (bottom) 315 mm Shredder hopper inner diameter (top) 782 mm Shredder hopper height 412 mm Hopper volume (shredder hopper) 85 liters Hydraulic unit Motor power 0.75 kW Pump flow rate 2.4 l/min Hydraulic tank capacity 5 liters Operating pressure 10–80 bar Max. pressure 160 bar Technical data for the SPYRA Chip Centrifuge PSZ 500 H: Outer diameter ø 1,160 mm Drum diameter ø 500 mm Input hopper ø 700 mm Output hopper ø 800 mm Total height at frame height 1,160 mm Motor power 4 kW Connection 400 Volt / 50 Hz Drum speed 1,200 rpm Hydraulic unit, Spyra standard Power 4 kW Voltage 400 Volt Tank volume 100 l Operating pressure 100 bar (without oil filling) Inspection lid bolted. No electrical monitoring. Alternative larger Centrifuge PSZ 600 H: Outer diameter ø 1,260 mm Drum diameter ø 600 mm Input hopper ø 700 mm Output hopper ø 900 mm Machine height without subframe 1,900 mm Discharge height 835 mm Total height at frame height 1,160 mm 2,735 mm (total height variable by adjusting the frame height and hopper) Motor power 5.5 kW Connection 400 Volt / 50 Hz Drum speed 1,000 rpm Hydraulic unit, Spyra standard Power 4 kW Voltage 400 Volt Tank volume 100 l Operating pressure 100 bar (without oil filling) If required, feel free to ask us about a lifting and tipping device, pivotable discharge conveyor, filtration unit, or control cabinet.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2003, X ašies eiga: 600 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 400 mm, stalo apkrova: 350 kg, veleno greitis (maks.): 12 000 aps./min, ašių skaičius: 3, Šis 3 ašių MORI SEIKI NV4000 buvo pagamintas 2003 m. Jame įdiegta CNC valdymo sistema, paprastai FANUC/MAPPS, ir vertikalaus apdirbimo centro konstrukcija. Pagrindinės specifikacijos: 600 mm x 400 mm x 400 mm ašių eiga, 700 mm x 450 mm dydžio stalas ir didžiausias 12 000 apsisukimų per minutę suklio greitis. Įrankių dėtuvėje telpa iki 40 įrankių. Apsvarstykite galimybę įsigyti šį vertikalųjį apdirbimo centrą MORI SEIKI NV4000. Susisiekite su mumis dėl išsamesnės informacijos. • Stalo dydis: 700 × 450 mm • Maksimalus ruošinio dydis (D × Š × V): maždaug 750 × 450 × 400 mm • Įrankių laikiklio tipas: BT40 ("Big Plus" parinktis įprasta) • Įrankių dėklo talpa: paprastai 40 įrankių • Greita eiga (X/Y/Z): 42 m/min. • Staklių technologija: DCG - varomosios jėgos centro konstrukcija, sumažinanti vibraciją ir padidinanti tikslumą bei paviršiaus kokybę Kodpfxox Imude Aldjdn Technical Specification Taper Size BT 40

Būklė: naudotas, Surveillance camera, video monitoring Kdjdpfx Asb N E Hdjldjn - Line camera lens, Optical Industry 3 550 450 - Origin: from warehouse clearance - Sold as is, untested, without warranty - Box dimensions: 80 x 185 x H120 mm - Weight: 1.2 kg

Būklė: geras (naudotas), Pozicinis kompiuteris, kompiuteris, valdymo blokas, roboto valdiklis, valdiklis, CNC valdiklis, valdymo pultas, kompiuterio monitorius, ekranas, TFT pramoninis monitorius, priekinis skydelis - Gamintojas: Nucleus, monitorius (ECO) .: FR366104 Kdjdpfx Alexudwysdjn - Kiekis: 7 monitoriai - Kaina: už vienetą - Matmenys: 245/110/H25 mm - Svoris: 0,3 kg/vnt.

Gamybos metai: 2000, būklė: naudotas, Industrial computer SIEMENS with touchscreen monitor. 3 units available in stock Price is per unit Kdodpohcirbofx Aldon

Gamybos metai: 2021, būklė: naujas, Julabo Model: FLW20006 Julabo FLW20006 Recirculating Chiller / Cooling Unit 400 V Year of manufacture: 2021 – As new condition For sale is a Julabo FLW20006 recirculating chiller suitable for laboratory and industrial applications. The unit was manufactured in 2021 and has never been operated, thus it is in as new condition. The recirculating chiller is water-cooled and ideally suited for demanding process and machine cooling requirements. High-quality Julabo industrial standard, robust construction, mobile on casters. Key features: - As new condition / unused - Water-cooled - Digital temperature control - RS232 interface - Alarm contact - Heavy-duty industrial construction - Mobile on casters Technical data (according to nameplate / manufacturer): Manufacturer: Julabo GmbH Model: FLW20006 Kjdpfxeyfnybs Aldsdn Year of manufacture: 2021 Protection class: IP21 Electrical data: Power supply: 400 V AC Frequency: 50 Hz Connection: 3P + N + PE Rated current: 18 A Refrigeration technology: Refrigerant: R452A Charge: 2750 g Operating pressure HP / LP: 26 bar each CO₂ equivalent: 5.88 t GWP: 2140 Temperature data (FLW series): Temperature range: –20 °C to +40 °C Temperature stability: ± 0.5 °C Dimensions & weight (approximate): Dimensions (H × W × D): approx. 1200 × 600 × 800 mm Weight: approx. 220–240 kg Shipping & delivery: Condition: As new Scope of delivery: - Julabo FLW20006 Recirculating Chiller - Connection cable Shipping method: Freight shipping on pallet (by arrangement, shipping costs depend on destination) Collection: Available by appointment. (Subject to change and errors in the technical data, all information is provided as is!) If you have further questions, we are happy to assist you by phone.

Gamybos metai: 2018, būklė: labai geros būklės (naudotas), Julabo Type: FLW7006 Julabo FLW7006 Recirculating Chiller / Cooling Unit 400V Excellent condition / Year of manufacture: 2018 For sale is a Julabo FLW7006 recirculating chiller, a powerful industrial cooling unit suitable for laboratory, test, and production applications. The Julabo FLW7006 is a water-cooled recirculating chiller. The unit comes from professional use, has been properly serviced and tested, and is in very good, clean condition. All functions are fully operational, the display and controls work flawlessly. Typical applications: - Machine and process cooling - Laboratory and testing technology - Plastic, laser, or equipment cooling Highlights: - Robust industrial design - Digital temperature display - External control (RS232) - Alarm connection - Castors for easy transport Technical data: Manufacturer: Julabo GmbH Model: FLW7006 Serial number: SN 10339349 Ksdpfx Aljyfndgododn Year of manufacture: 2018 (according to name plate) Refrigeration technology: Refrigerant: R452A Filling quantity: 1,625 g Operating pressure: max. 24 bar CO₂ equivalent: 3.48 t GWP: 2140 Temperature & performance data (manufacturer specifications): Temperature range: –20 °C to +40 °C Temperature stability: ± 0.5 °C Cooling capacity (typical, depending on application conditions): - approx. 1.3 kW at –20 °C - approx. 5.5 kW at 0 °C - approx. 7.4 kW at +20 °C Connections & Equipment: - Supply and return (industrial fittings) - Pressure gauge - Shut-off valve - RS232 interface - Alarm contact (max. 30 V / 1 A) - Castor chassis Electrical Data: Power supply: 400 V AC Frequency: 50 Hz Connection: 3P + N + PE Rated current: 14 A Protection class: IP21 Dimensions & weight (approx.): Dimensions (H × W × D): approx. 1050 × 550 × 750 mm Weight: approx. 150–170 kg Shipping & Delivery: Condition: used Scope of delivery: - Julabo FLW7006 recirculating chiller - Power cable Shipping method: Freight shipment on pallet (by arrangement, shipping costs depending on destination) Collection: possible by appointment. (Subject to technical changes and errors in the specifications!) If you have further questions, we would be happy to answer them for you by phone.

Gamybos metai: 2000, būklė: visiškai atnaujintas (naudotas), System for filling, cooling and sealing plastic suppository moulds. The line was completely overhauled both mechanically and electronically in 2019 and is in like-new condition. Ksdpefc I Haefx Aldedn Before delivery, the system is tested with suppositories supplied by CP-Citopac GmbH. For further technical details, please refer to the data sheet.

Būklė: naujas, Gamybos metai: 2025, Our SAPI pressure blasting unit, type "Mammut" with a 200-liter vessel capacity, is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. A water separator is also permanently fitted to the blasting unit, which removes moisture from the compressed air and prevents the blasting media from clumping due to excessive humidity. For safe operation of the sandblasting unit, our safety shut-off system is included. This starts and stops the blasting process via the hand lever mounted on the blasting hose. Scope of delivery includes: - SAPI pressure blasting unit "Mammut 200 L" - Pressure regulator 1 1/4", permanently fitted - Water separator 1 1/4", permanently fitted - SAPI safety shut-off system Technical data – pressure blasting unit: - Precisely adjustable from 0.1 – 12 bar - TÜV-tested with certificate - Fixed piping 1 1/4" internal and external - Rubber-coated metal cone with rubber seal - Large handhole opening - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 200 l Kdodowc Rk Eopfx Aldon - Overall height: 1,420 mm - Vessel diameter: 600 mm - Overall diameter: 1,000 mm - Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with Safety Shut-Off - Fastest on/off switching times in compliance with trade association regulations (VBG 48) - The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar - Reduced consumption of blasting media, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on - Upon restarting, full blasting pressure is immediately available at the nozzle – no pressure build-up required → lower consumption & reduced hose wear - No condensate formation in the vessel, as it remains permanently pressurized → no venting required for each start/stop - Optimum media dosing with hardened fine dosing valve - Less compressed air requirement → noticeably lower diesel consumption - One-person operation, as the pressure is shown and can be adjusted directly at the manometer – even without starting - No components susceptible to failure such as control valves, membranes, or seals → easy maintenance and high operational safety - Only the blasting hose in the safety shut-off needs to be checked and, if necessary, replaced

Būklė: naujas, Gamybos metai: 2025, Our SAPI pressure blasting unit type "Mammut" with a 100-liter vessel capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the integrated pressure regulator. The unit is also equipped with a permanently installed water separator that removes moisture from the compressed air and prevents the blasting media from clumping due to excessive humidity. For safe operation of the sandblasting unit, our safety shut-off system is included. It starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blasting unit is delivered fully operational and space-saving, pre-mounted in a mesh box. All that is required is to connect the compressed air supply and fill with blasting media. Transport can be easily handled using a forklift or pallet truck. For protective clothing, spare parts, etc., a lockable aluminium storage box is mounted on the unit. Kdsdpfx Aowc Ri Ielden Scope of delivery includes: - SAPI pressure blasting unit "Mammut 100 L" - 1" pressure regulator, permanently installed - 1" water separator, permanently installed - SAPI safety shut-off system - Blasting media sieve - Lid - 10 m blasting hose ø 25x7 mm, fully assembled - Silicon carbide venturi long nozzle, selectable diameter: 6 mm, 8 mm or 10 mm - Sandblasting helmet RED 2 - Sandblasting overall, nylon/cotton - 1 pair of leather blasting gloves - 10 m breathing air hose, fully assembled - Breathing air filter/activated carbon filter SAF - Wear parts kit consisting of: - 100 tear-off visors for RED 2 - 10 inner lenses for RED 2 - 1 blasting hose coupling 25x7 mm nylon - 2 rubber seals for the hose coupling - 1 nozzle holder 25x7 mm - Mesh box with blasting hose holder - Lockable aluminium box Technical data for the pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV tested with certificate - Fixed 1" piping inside and outside - Rubber-coated metal cone with rubber gasket - Large hand hole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 100 l - Overall height: 1,130 mm - Vessel diameter: 490 mm - Overall diameter: 900 mm - Weight approx. 75 kg Dimensions mesh box: - Length: 1,460 mm - Width: 840 mm - Height: 1,400 mm - Total weight incl. all accessories: 260 kg

Būklė: naujas, The SAPI Mammut sandblasting units with QUICK STOP™ system are powerful industrial sandblasting machines used in various sectors such as automotive, construction, and manufacturing. These systems are engineered for fast and efficient surface preparation, cleaning, and treatment of metal, concrete, and other substrates. The SAPI QUICK STOP™ device is a safety feature designed to prevent accidents and damage to the unit. It operates by immediately stopping the blasting process as soon as the operator releases the control handle, instantly cutting off the abrasive flow. This safety system helps prevent workplace accidents and protects the machine from damage caused by overuse. Kdjdsupyw Ejpfx Aldon Efficiency and Durability The QUICK STOP™ system reduces air and fuel consumption, resulting in a more efficient and cost-effective sandblasting process. The Mammut sandblasting machine is robustly constructed from high-quality components, ensuring reliable operation even in the harshest environments. All of our machines are fully CE- and TÜV-compliant. Flexibility and Versatility The machine is available in various tank sizes to accommodate different blasting requirements. A wide range of abrasive materials can be used, from regular sand to special plastic or metallic media. Our Mammut with QUICK STOP™ is suitable for numerous applications including surface preparation, cleaning, and the removal of rust, paint, and coatings. Precision and User-Friendliness Our Mammut with QUICK STOP™ offers precise control and adjustment of the blasting pressure even during operation, delivering consistent results and high accuracy. Additionally, all of our units feature easily accessible inspection and maintenance openings. Safety The QUICK STOP™ system with a deadman control handle ensures maximum safety during blasting operations. QUICK STOP™ also prevents moisture buildup inside the machine by maintaining constant pressure, even when blasting is stopped – a clear advantage over standard on/off systems. All Mammut sandblasting units with QUICK STOP™ come fully equipped as standard. Our packages typically include a blasting hose, nozzle, pressure regulator, moisture separator, abrasive metering valve, and basic personal protective equipment.

Būklė: naudotas, Tool turret TER Type: 0.5.480.525 The item is used, originating from the dismantling of industrial machinery, and was operational up until removal. Please note that the image shown is for reference only; while the units are identical in construction, actual items may show varying signs of use and/or software versions. Brand names, trademarks, and registered trademarks are the property of their respective owners and are used here for descriptive purposes only. Kdodpfx Alevi Hvlodon Further information is available on our website.

Būklė: naudotas, WEISS MAIN SPINDLE 1P JBD:168347 This item is used, was dismantled from industrial machinery, and was operational until its removal. Please note that the image shown is for reference only; the actual item is of the same type but may have varying signs of use and/or software versions. Brand names, trademarks, and registered trademarks are the property of their respective owners and are used here for descriptive purposes only. Ksdpsvr E Dgsfx Aldjdn Further information can be found on our website.

Būklė: naujas, Our SAPI pressure blasting unit type "Mammut" with a 60-litre tank capacity is suitable for all common blasting media. The blasting pressure can be infinitely adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The unit also features a permanently mounted water separator, which extracts moisture from the compressed air and thus prevents the blasting media from clumping due to excessive humidity. For safe operation, our safety shut-off system is included. This allows starting and stopping of the blasting process via an operating lever mounted on the blasting hose. Delivery includes: - SAPI pressure blasting unit "Mammut 60 L" - Pressure regulator 1", permanently installed - Water separator 1", permanently installed - SAPI safety shut-off system Technical specifications pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV certified with certificate - Fixed 1" piping, internal and external - Rubber-coated metal cone with rubber seal - Generously sized hand hole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 60 l - Overall height: 1,130 mm - Vessel diameter: 360 mm - Total diameter: 700 mm - Weight: approx. 60 kg Kjdpfx Ajwc Afhsldodn ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT WITH SAFETY SHUT-OFF: - Extremely fast switching on and off times, complying with industrial safety regulations (VBG 48) - Pressure setting can be fine-tuned accurately prior to blasting, infinitely adjustable from 0.1 – 12.0 bar - Lower blasting media consumption, as the pressure vessel remains constantly pressurized and thus no unnecessary media run-on occurs - Upon restarting, full blasting pressure is immediately available at the nozzle, eliminating delay; this results in significantly lower media consumption and reduced wear on the blasting hose - No moisture formation (condensate) in the vessel, as it remains continuously pressurized, avoiding ventilation during each start and stop; this procedure offers additional benefits: - Optimal blasting media dosing with hardened fine adjustment valve - Reduced compressed air demand, significantly lowering fuel (diesel) consumption - Single-person operation, as the vessel pressure is continuously displayed and can be conveniently adjusted via the pressure gauge without prior startup - No failure-prone components such as control valves, membranes, or seals, resulting in high operational reliability and low maintenance. Only the hose in the safety shut-off needs to be inspected and replaced if necessary.

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, bakelio talpa: 10 000 l, Diesel Fuel Station – On-site Fuel Station – Industrial Fuel Station – Consisting of: 1 x Storage Tank, 10,000 liters capacity, used 1 x Fuel Dispenser, Type Eco 75, brand new Description of the Tank: According to DIN 6616-D, above-ground, double-walled, including test certificate. The tank has two saddle supports, a manhole with dome cover, is used, internally emptied and professionally cleaned, and is equipped with the following fittings: - 1 fill pipe with TW cap (filling cap) and dip tube - 1 dip stick pipe with dip stick and closure - 1 vent pipe with vent hood - 1 brand-new overfill prevention sensor with type approval (AIII) - 1 ladder and 1 spare socket for extraction purposes - 1 optical leak detection device with type approval and leak detecting fluid. The tank is newly primed and painted on the outside (RAL color). Length = approx. 5.30 m – Diameter = 1.60 m – Weight approx. 2.4 t – Ex works, loaded free of charge Description of the Fuel Dispenser: Type Eco 75 – not suitable for calibration (not legal for trade), Delivery rate up to approx. 75 l/min, suitable for diesel fuel, incl.: - Fuel management terminal with connection to myTecalemit Cloud - incl. web-based tank data management software – Basic module – - 2 identification systems drivers/vehicles for max. 4,000 users - Identification via transponder technology - USB interface for data retrieval - Vane cell pump with single-phase asynchronous motor – 230 Volts - Oval gear meter with pulse output, accuracy approx. +/- 0.5% - Angle-seat filter / dirt filter with fine mesh - 4 m delivery hose DN 25 with type-approved automatic nozzle, incl. swivel joint and hose holder - Nominal suction height approx. 3.5 m / max. suction line length = 6.0 m - Robust, powder-coated steel cabinet – Dimensions: approx. 1,410 x 520 x 275 mm – Two-line, backlit monochrome display, character height 8 or 19 mm – Tank data storage for up to 10,000 dispensing records – Menu navigation in German, English, and French Additional magnetic keys / transponders required. General Information: Ksdpfei An Ufox Aldedn You will receive an invoice with VAT shown separately. Purchase is made according to our general terms and conditions. Further fuel systems (new and used) and rental units are also available! In addition, we purchase existing fuel systems and, with certified specialist qualifications under the German Water Resources Act (§ 62 WHG), can professionally drain, clean, dismantle and remove them.

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, rida: 29 870 km, pirmoji registracija: 04/2016, bendras svoris: 2 000 kg, kuro tipas: elektrinis, spalva: smėlio spalvos, ašių konfigūracija: 4x2, darbinė masė: 1 247 kg, tuščias svoris: 1 247 kg, kuras: elektra, vairuotojo kabina: dieninė kabina, pavaros tipas: automatinis, pakaba: parabolinė lingė (spyruoklė), Gamybos metai: 2016, veikimo valandos: 1 378 h,

Gamybos metai: 2020, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Maisto pramonės transporteris, juostos greitis reguliuojamas (Ponti) Kdodpfx Aox Tg Sasldon

Būklė: naujas, Gamybos metai: 2025, Stationary Concrete Batching Plant PROMAX S130-TWN (130 m³/h) "Type: Stationary concrete batching plant with twin-shaft mixer Capacity: 130 m³/hour freshly batched concrete Mixer capacity: 4500/3000 l (3 m³ compressed concrete) Central lubrication system brand: ILC (Made in Italy) Control system: Fully automatic PC - PLC - printer Kdedpfxjflz Ido Alden Electrical equipment: Siemens Other equipment and accessories: Italian Unlimited users and remote access Installation and commissioning of the plant are our responsibility 24/7 SERVICES Export of more than 1,000 concrete batching plants to over 90 countries * HIGH EFFICIENCY AND DUPLICATE PRODUCTION * EASY MAINTENANCE * SUITABLE FOR OPERATION UNDER HARSH CONDITIONS * SUITABLE FOR RCC CONCRETE PRODUCTION"

Gamybos metai: 2016, būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, We offer these ready-to-use AUMA actuators and JC Spain gate valves, sizes 10" to 42", with actuators, type: Valves for Oil Industry, year of manufacture 2016. High-performance gate valves Size: 10" to 42" Pressure class: 600 lbs, stellite 6 hard-facing and 13% Cr trim (internal parts) Kdodpfxjy D Ilij Aldjn BWE (butt-weld ends), wedge type gate valve, bolted bonnet, OS&Y Material: ASTM A-216 WCB (cast carbon steel) Most units are equipped with explosion-proof, intelligent AUMA AUMATIC ExC actuators. Optionally, we can overhaul actuators and gate valves and provide a Factory Acceptance Test (FAT). Actuator manufacturer: AUMA Riester GmbH & Co. KG Model: 10" to 42" gate valves with actuators ● 42" gate valves (2 units): Equipped with AUMA SAEX 30.1 actuators. ● 32" gate valve (1 unit): Equipped with AUMA SAEX 16.2 / ACEXC 01.2 / GK40.2. ● 30" gate valves (4 units): Equipped with AUMA SAEX 16.2 / ACEXC 01.2 / GK40.2. ● 30" gate valves (2 units): Handwheel (can be fitted with actuators). ● 16" gate valves (9 units): Equipped with AUMA SAEX 14.6/GK30.2 Germany actuators (Ex-proof). ● 10" gate valve (1 unit): Handwheel. Location: Ras al Khaimah, UAE If you have any questions or require further information, please feel free to contact us by message or phone.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0000121172, bendras svoris: 665 kg, keliamoji galia: 30 kg, rankos pasiekiamumas: 2 033 mm, valdiklio modelis: KRC2, ašių skaičius: 6, Nėra minimalaus kainos – garantuotas pardavimas už didžiausią pasiūlymą! TECHNINIAI DUOMENYS Keliamoji galia: 30 kg Darbo diapazonas: 2 033 mm Ašių skaičius: 6 ĮRANGOS DUOMENYS Kdjdpozcnv Djfx Alden Valdymo modelis: KRC2 Įrenginio svoris: 665 kg KOMPLEKTACIJA Roboto ranka KRC2 valdymo spinta Valdymo pultas (KCP2) Instaliacija (išskyrus vieną valdymo laidą) Dvigubas griebtuvas Profibus komunikacija Pastaba EXW: Išardymą ir pakrovimą turi organizuoti pirkėjas.

Būklė: naudotas, Gamybos metai: 2007, veikimo valandos: 40 650 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: E-28210, bendras svoris: 120 kg, valdiklių gamintojas: Fanuc, Pilnai veikiantis robotas. Griebtuvas neįtrauktas ir nebus parduodamas. Vaizdo įrašas prieinamas pagal užklausą. Profibus protokolai. Kdodszd Dinspfx Aldon