Plūgas pirkti naudotą (858)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Reikšmė
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Įkėlimo data
- Seniausi skelbimai
- Įkėlimo data
- Trumpiausias atstumas
- atstumas
- Didžiausias atstumas
- atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Atnaujinimas
- Seniausias atnaujinimas
- Atnaujinimas
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- modelis
- Modelis nuo Z iki A
- modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- reikšmė
- reikšmė
Mažas skelbimas
Bremen
1 009 km
Padėklų stelažų sistema
unbekanntunbekannt
Skambinti
Būklė: naujas, Length 3000 mm
Width 1050 mm
Height 2500 mm
Load capacity per storage position: t
Number of storage positions: 9
Machine weight approx.: t
Required space approx.: 3.0 x 1.05 x 2.5 m
Gusdpfx Aet Eaaxjp Ijc
2x plug-in heavy-duty racks for Euro pallets
The price is per unit!
Also available individually.
Mažas skelbimas
Bienne
1 455 km
Precizinė tekinimo staklė
Schaublin180-CCN R-TM
Skambinti
Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 341883, TECHNICAL SPECIFICATIONS
Capabilities:
Maximum turning diameter: 270 mm
Maximum diameter over cross slide: 160 mm
Center height over cross slide: 83 mm
Maximum diameter over bed: 430 mm
Turning length (depending on equipment): 630 mm
Headstocks:
Standardized spindle nose, enabling use of various collets and chucks with appropriate adapters.
Collet accessories SCHAUBLIN: B45/F66
Maximum bar capacity, diameter: 36 mm/60 mm
Standard power chuck, diameter: 210 mm
Direct drive by AC motor, power at 100% / 50% duty cycle: 15 / 18.5 kW
Maximum torque at 100% / 50% duty cycle: 135 / 165 Nm
Maximum spindle speed: 4000 rpm
Spindle positioning increment: 0.1°
C Axis:
Programmable increment: 0.001°
Spindle locking torque: 80 Nm
Pneumatic clamping cylinder: 3400 daN
Cross Slide:
Transverse travel, X axis: 230 mm
Radial resolution: 0.0005 mm
Driven by AC motor, nominal torque: 3 Nm
Ball screw, dia. x pitch: 32 x 5 mm
Longitudinal travel, Z axis: 720 mm
Resolution: 0.001 mm
Driven by AC motor, nominal torque: 6 Nm
Ball screw, dia. x pitch: 32 x 10 mm
Feeds:
Working feed, X/Z axes stepless: 0–5000 mm/min
Rapid traverse, X/Z axes: 8/10 m/min
Feed force, X/Z axes: 420/670 daN
Turret Tool System:
Number of tool stations: 12
Number of driven tool stations: 6
Driven by AC motor, intermittent power: 3.7 kW
Max. intermittent torque: 36 Nm
Max. drive speed: 5000 rpm
Standardized toolholder mounting: VDI 30
Maximum turning tool section: 20 x 20 mm
Integrated coolant
Indexing in both directions
Coolant:
Tank capacity: 120 liters
Pump flow rate: 10 l/min
Pressure: 5 bar
Inventory 2230043 includes:
1 Fanuc 18i control
1 A2-6 spindle headstock
1 12-position VDI 30 turret for 6 driven tools
1 pneumatically-operated tailstock support 180-65.200
1 SCHUNK Rota-s 200-52 A2-6'' 3-jaw chuck
1 Brucker CM5 live revolving center
1 ESX-25 radial drilling-milling head, max speed 5000 rpm, without EX nut, ref 4100.00552
1 ESX-25 axial drilling-milling head, max speed 5000 rpm, without EX nut, ref 4100.00550
1 KENNAMETAL ESX-25, without EX nut
1 EWS ESX-25, without EX nut
4 short left radial toolholders, type B2, ref 4100.0100
1 ESX-25 collet holder, type E3, with EX25 nut and 5 mm collet
1 similar, without EX25 nut
3 tapping collets, Ø 4.5, 6, and 8 mm
1 toolholder for indexable insert drills, Ø 40 mm bore, type E1, ref 4100.00124
1 similar, Ø 32 mm bore, ref 4100.00107
1 similar, Ø 20 mm bore, ref 4100.00105
1 boring bar holder, Ø 8 mm, type E2, ref 4100.00108
1 similar, Ø 10, ref 4100.0109
1 similar, Ø 12, ref 4100.0110
2 similar, Ø 16, ref 4100.0111
1 similar, Ø 20, ref 4100.0112
1 similar, Ø 25, ref 4100.0113
1 similar, Ø 32, ref 4100.0115
1 similar, Ø 32 GARANT, long
5 steel protective plugs, type Z2, ref 4100.00130
Gsdpfxozb U Epj Ap Ijuc
1 axial left toolholder, C4 force, ref 4100.00103
1 pneumatically-operated support tailstock CM 5, ref 180-65.200
1 stand for microscope only, ref 180-60.005
1 coolant system
OPTION
1 hinged steady rest with 3 fingers for Ø 30 – 120 mm, ref 180-70.200, CHF 2,500.– + VAT
All technical information provided without liability for errors or omissions.
Mažas skelbimas
Moers
1 216 km
SALOTŲ PREKYSTALIS BUFETO PREKYSTALIS SALADETĖ
GKS
Skambinti
Gamybos metai: 2018, būklė: labai geros būklės (naudotas), A REAL EYE-CATCHER
Please note: Due to time constraints, we can only respond to inquiries that include a telephone number.
We are offering here a used salad bar / saladette / fresh food counter / self-service counter:
- Plug-and-play with built-in refrigeration unit
- Cover is easy to raise and lower via ropes
- With tray shelf on the customer side
Manufacturer: GSK
Year of manufacture: ca. 2018
Model designation: see photos
Weight: total approx. 358 kg
Dimensions:
Height: 155 cm
Width: 208 cm
Depth: 100 cm (incl. customer shelf)
* Plug-ready
* Separate refrigeration unit
* Generous storage space
* Fitting for cutlery holder
* Tray storage compartment
* With lighting
Temperature cools down to 0.6°C and, as set by us, switches back on at approx. 3.5°C.
Collection from warehouse 47441 Moers.
Inspection is expressly offered.
More equipment in stock.
If you wish to receive an offer, please note the following:
For offer preparation we require a complete billing and delivery address as well as a telephone number.
An email address is also essential, as we unfortunately cannot send offers via Machineseeker.
We will then prepare a quotation for you. Our bank details will be included with the offer.
If you would like to accept the offer, please make payment and we will dispatch the item immediately upon receipt of payment. An invoice will be sent to you automatically.
If you have any further questions, please contact us.
Best regards
JS Trading GmbH
General:
We offer items from various business closures described as accurately as possible, along with detailed photos. No further information on the item can be provided.
We offer inspections by appointment on Tuesdays and Thursdays from 9:00 am to 4:00 pm. Collection can be arranged immediately if required.
Unless explicitly stated otherwise, the item offered here is used (from business closure). Items have been visually inspected and are, as far as we can tell, in order. Please see the photos.
Functionality test conducted – result OK.
All offers ex warehouse 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. For your information: Packaging and shipping costs amount to €490 net due to the elaborate packaging required. Collection is likely to be more cost-effective in any case.
Feel free to call if interested.
Gjdeh Uxd Iopfx Ap Ieuc
All measurements are approximate.
You can find more offers from gastronomy, warehouse technology, trolleys, etc. in our shop.
Photos similar.

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo
Mažas skelbimas
Kolkwitz
746 km
Standartinis vilkikas
FreightlinerCoronado WOHNMOBIL ZULASSUNG
Skambinti
Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, galia: 384 kW (522,09 AG), pirmoji registracija: 08/2007, kuro tipas: dyzelinas, tuščias svoris: 8 900 kg, padangos dydis: 275/80 22,5, ašių konfigūracija: 6x4, pavaros tipas: automatinis, emisijos klasė: Euro 4, pakaba: plienas-oras, lovų skaičius: 2, bendras ilgis: 8 950 mm, bendras aukštis: 4 000 mm, Gamybos metai: 2007, Įranga: ABS, Tachografas, antras kuro bakas, autonominis šildytuvas, diferencialo užraktas, kruizo kontrolė, oro kondicionavimas, papildomi žibintai, vairo stiprintuvas, šaldytuvas, WITH MOTORHOME REGISTRATION!!!
Freightliner Coronado
Detroit Diesel S60 Series
Automatic transmission with clutch for starting and maneuvering.
2 beds, the upper one foldable
Camping plug/adapter
Tires in excellent condition
Front camera
Guedpfxey S Sbks Ap Isc
Classic Coronado interior—everything you could wish for. This truck has too many extras to list. For further questions, please contact us by email or phone. Price includes German vehicle registration certificate. Errors and prior sale excepted. Financing and trade-in possible—feel free to make an offer. Tipping hydraulics available at extra cost! OUR motorhomes ARE CLEARED THROUGH CUSTOMS AND TAXED IN GERMANY AND INCLUDE AN EU REGISTRATION CERTIFICATE. WITH US, QUALITY IS NOT JUST A NAME—WE DELIVER!
Didn't find your dream vehicle among Europe's largest US truck selection? Not your corporate livery or favorite color? No problem... we have over 500 more trucks and motorhomes—both new and used—of all brands available in the USA and Canada. In addition, we work with one of the best body shops in Germany. Get professional advice and a free quote. We look forward to your call! Viewing appointments are possible only by prior arrangement.
Mažas skelbimas
Köln
1 222 km
Gyvenamasis konteineris
Bürocontainer / WohncontainerBaucontainer 20 Fuß Neu kaufen
Skambinti
Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, konteinerio ilgis: 20 pėda, spalva: balta, krovinių skyriaus plotis: 2 400 mm, krovimo vietos ilgis: 6 000 mm, krovos erdvės aukštis: 2 600 mm, mašinos/transporto priemonės numeris: Bürocontainer Module T, Įranga: autonominis šildytuvas, oro kondicionavimas, Module T Deutschland GmbH | Office Containers | Residential Containers | Construction Site Containers | High-Quality and Flexible Solutions
Buy 20-Foot Office Container 14.4 m² NEW | Insulated 6×2.4 m Office Container | Construction Site Container
Gusdpfxsy A Scij Ap Isc
Purchase office containers directly from the manufacturer – insulated 20 ft office container (14.4 m²), ready for immediate use. Ideal for construction sites, project offices, industrial sites and mobile office solutions.
Buy 20-Foot Office Container – Insulated 14.4 m² office container for flexible applications
“Manufacturer of modular containers – bespoke solutions tailored to your specifications, including custom dimensions and high-end interior fittings.”
The 20 ft (6×2.4 m) office container from MODULE-T Germany GmbH is the ideal solution when you want to buy a robust, ready-to-use office container. With a 14.4 m² surface, this office container is perfect as a site office, project container, sales office, or mobile office.
Thanks to its sturdy steel frame construction, high-quality PU insulation, and modular design, this insulated office container is suitable for year-round use and provides a durable, cost-effective space solution.
👉 Buy office containers now – brand new, flexible & direct from the manufacturer
🟩 Areas of Application
- Site office / Construction management container
- Mobile office container for industry & commerce
- Project office & administration container
- Sales office / Reception container
- Mobile office container solutions
- Staff accommodation container
🟩 Your Advantages
✔️ 20 ft office container – 14.4 m² usable space
✔️ Ready to use – plug & play system
✔️ Insulated office container – suitable for year-round use
✔️ 2,000 W electric heater included
✔️ Robust steel construction – durable & stable
✔️ Modularly expandable to container complexes
✔️ 100% new – no rental or used containers
✔️ Direct from the manufacturer – excellent value
🟩 Technical Specifications
- Model: OC-A6000.1
- Dimensions: 6,000 × 2,400 mm (20 ft)
- Area: 14.4 m²
- Interior height: 2,400 mm
- Exterior height: 2,600 mm
🟩 Construction & Materials
Frame:
- Welded, painted steel frame
Walls:
- 50 mm PU sandwich panels
- Optional: reinforced insulation / mineral wool
🟩 Doors & Windows
- Insulated steel door (880 × 1960 mm)
- 2 × PVC windows (double-glazed)
✔️ Bright and pleasant working environment
🟩 Flooring
- 16 mm cement fibre board
- 3 mm PVC covering
✔️ Easy to maintain
✔️ Durable
✔️ Fire protection class A1
🟩 Heating & Comfort
- 2,000 W electric heater (included)
✔️ Ideal for year-round use
🟩 Electrical Equipment
- LED interior lighting
- Exterior lighting
- Sockets & light switches
- Integrated fuse box
👉 Delivered ready for connection
🟩 Optional Equipment
- Air conditioning (heating & cooling)
- Roller shutters / security bars
- Reinforced insulation up to 100 mm
- Custom RAL color options
🟩 Delivery & Assembly
🚚 Delivery Germany & Europe: approx. 40 days
📦 Delivered pre-assembled or flat-packed
⚡ Ready for use shortly after connection
🟩 Why MODULE-T Germany?
- Over 15 years' experience in container construction
- Specialist for office containers & modular buildings
- Pan-European delivery & projects
- Direct from the manufacturer – no intermediaries
🟩 Call-to-Action
👉 Buy office container now or request a quote
👉 Secure individual consultation directly from the manufacturer
Atraskite daugiau naudotų mašinų
Mažas skelbimas
Hessisch Lichtenau
1 040 km
MIG/MAG impulsinė apsauginių dujų suvirinimo įranga, suvirinimo aparatas, impulsinis suvirinimo apar
REHMRMP 400 Hybrid (REHM-Mega-Puls)
Skambinti
Būklė: naudotas, REHM RMP 400 Hybrid Impulse Shielded Gas Welding Machine (REHM Mega-Pulse)
Pulse welding machine with inverter power source
Serial no.: Year of manufacture: 1998
Output: 400 A = 60% duty cycle
320 A = 100% duty cycle
Infinitely variable adjustment range
Mains connection: 400 Volt, 50 Hz, 32 A plug
- Separate 4-roll wire feeder with connection hose package, meter
Gsdpfxjwa Uwds Ap Ijuc
- Digital display for voltage and current
- Pulse welding unit with single and double pulse modes
- 2-stroke and 4-stroke welding modes
- 4 meter Binzel hose package with central connector
- Water-cooled
- Shielding gas pressure regulator
- MIG/MAG impulse arc welding
- MSG double pulse welding
- MIG/MAG welding
Space requirement (L x W x H): 1150 x 510 x 1350 mm
Weight: 200 kg
Good condition
Mažas skelbimas
Hessisch Lichtenau
1 040 km
Juostinė linija – išvyniojimo ritė ir tiesinimo mašina, ritė ritininėms medžiagoms, lakštų tiesinimo
HMS450 x 6
Skambinti
Būklė: naudotas, Strip Processing Line – Decoiler and Straightening Machine
Year of manufacture: 1991
Strip width: 50 to 450 mm
Sheet thickness with straightener inactive: 6 mm
Sheet thickness with straightener active: 2 mm
– Very well-equipped, with introduction aids
Space requirement for complete line (L x W): approx. 7000 x 3000 mm
Total weight of the line: approx. 11 tons
Good condition
Straightening Machine HMS Type RS 47-04/1, Machine No.
Strip width, nominal: 400 mm
Strip width, maximum pass: max. 455 mm
Strip thickness at 400 mm width (steel): max. 1.5 mm
Strip thickness at 400 mm width (copper): max. 2 mm
Speed: max. 40 m/min
Number of straightening rollers: 7 pcs
Straightening roller diameter: Ø 40 mm
Number of feed rollers: 2 pcs
Feed roller diameter: Ø 80 mm
Entry/throughput height: 1500 mm
– Straightening rollers hardened, ground, and hard-chromed, with central support
– Feed rollers hardened, ground, and hard-chromed, with hydraulic lift
– Manual straightening roller adjustment
– Introduction aid with hydraulically extendable tongue and hydraulically adjustable deflector roller
– Adjustable lateral strip guide
– All straightening rollers driven via distributor gearbox with cardan shafts
– Both feed rollers driven via gearbox with cardan shafts
– Frequency-controlled drive via geared motors
– Straightening machine opening stroke 250 mm for system cleaning or feeding thicker material, lifting movement via trapezoidal thread spindle
– Ultrasonic loop control
Gjdpfoif Sg Sex Ap Ijuc
Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm
Net weight: approx. 4 tons
Decoiler HMS Type BA 1.5-06/80, Machine No.
Coil weight: max. 8000 kg
Coil outside diameter: max. 1600 mm (with loading saddle)
Coil outside diameter: max. 2000 mm (without loading saddle)
Diameter of coil support disc: Ø 1700 mm
Coil inside diameter, expansion range: 460–520 mm
Coil width, nominal: max. 630 mm
Width of expansion jaws: 750 mm
Height of decoiler drum above base plate: 1500 mm
– Decoiler drum drive via hydraulic motor and gear
– Pneumatic overrun brake on decoiler drum (TWINFLEX)
– Hydraulic expansion of decoiler drum, centrally via wedge slide system
– Hydraulic pressure arm with hydraulically powered double pivoting roller
– Coil loading saddle with 12 t lifting capacity and 300 mm lift
– Decoiler in above-floor frame with motorized cross travel drive
Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm
Net weight: approx. 5 tons
Central Hydraulic Unit (separate)
Tank capacity: 350 liters
Drive power: 18.5 kW
– Drive motor with 2 REXROTH pumps (tandem pump)
– Oil cooler as air heat exchanger with fan motor
Transport dimensions (L x W x H): 1600 x 850 x 1450 mm
Net weight: approx. 800 kg
Control Cabinet (separate)
– All cable connections plug-in via Harting connectors
Transport dimensions (L x W x H): 2800 x 500 x 2250 mm
Net weight: approx. 800 kg
Mažas skelbimas
Memmingen
1 235 km
Pakavimo sistema
ITALDIBIPACKLEO
Skambinti
Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2020, Our mobile wrapping machine is a used unit with a white hood, in good condition, with scratches on the housing and chassis. Includes a 6-month warranty, fully tested and serviced. Optional accessories such as a wide sensor belt are available upon request.
INCLUDES U.V.V. inspection
Advantages at a glance:
- Working area of only 750 mm around the pallet
- Extremely compact design
- Patented steering system
- Up to 40% less space required compared to competitors
- Very easy operation
- German support
- Optional upgrades available even after purchase
The LEO requires only 75 cm (about shoulder width) around the pallet to be wrapped.
WORKING AREA
Pallet dimensions:
Height: min. 500 mm / max. 2,000 mm
Length: min. 600 mm / no limit
Width: min. 600 mm / no limit
Machine dimensions:
Height: 1,950 mm
Length: 980 mm
Width: 700 mm
Pallet weight: min. 50 kg (lower on request)
FILM DATA
Wrapping programs:
- Bottom and top wrap
- Cross and single-pass wrap
- With stop for top sheet placement
Max. film width: 500 mm
Max. core diameter: 76 mm
Max. outer diameter: 220 mm
MACHINE DATA
Voltage:
- Battery: 2 x 12 Volt
- Charger: 220 Volt integrated
- Drive: 2 x 24 Volt
- Film carriage: 1 x 24 Volt
Film carriage:
- Separate parameters for up and down movement
- Mechanical film brake
- Continuously adjustable
Control:
- Touch panel with digital display
- Quick-select buttons
- Drawbar with navigation keys
- Pallet detection via sensor belt
- Emergency stop button
- 6 programmable work modes
- Dual collision protection
Mast: Stationary design
Weight: 195 kg
ADDITIONAL DATA
- Height detection via photo sensor
Godpfswtt D Asx Ap Iouc
- All drives via chain
- Capable of wrapping black products or using black stretch film (optional)
- Acoustic and visual warning indicators
- Machine with CE marking
The machine can wrap black products or use black stretch film. It can be recharged with any standard cable with a Euro plug from a 230V household socket. Such a charging cable is, of course, included in the delivery.
Mažas skelbimas
Stawiec
595 km
Sraigtinis kompresorius
AIRPRESSAPS 5,5
Skambinti
Būklė: naujas, Oil-lubricated Compressor Airpress APS 5.5KW BRAND NEW COMPLETE
Screw Compressor APS 7.5 Combi Dry X 10 bar 7.5 HP/5.5 kW 690 l/min 200 l BRAND NEW unit
Weight (kg): 310.00
Dimensions L x W x H (cm): 140 x 60 x 143
Duty cycle per work hour (%): 100/0
Motor power (HP/kW): 7.5 HP / 5.5 kW
Motor efficiency class: IE2
Motor type: AC
Drive: Direct drive 1:1
Dryer: 230 V / 50 Hz / 1 Ph
Compressed air receiver: Yes
Air receiver capacity (l): 200
Output capacity (l/min): 690
Maximum pressure (bar): 10
Max. effective output (l/min): 690
Max. effective output (m³/h): 41.4
Output capacity (m³/h): 41.4
Sound level dB(A): 63
Sound level dB(A) (4 m): 43
Plug type: EU
Gjdpfx Apeq D Dcgj Ijuc
Refrigerant: Air
Main air connection (" thread): 3/4" Female
Direct air connection (" thread): -
Oil-free: No
Number of compression stages: 1
Start-up: Y-Δ (Star-Delta)
Power supply: 400 V / 50 Hz / 3 Ph
Aftercooler: No
Variable speed drive (IVR): No
Net price: 15,500 PLN
Gross price: 19,065 PLN
Mažas skelbimas
Lüdenscheid
1 163 km
Stulpinis gręžtuvas
FLOTTSB 30 MV Plus (NEU ab Werk)
Skambinti
Būklė: naujas, Gamybos metai: 2026, Standard Equipment
- Thread cutting device
- Control panel with OLED display
- Robust, high-quality drilling head cover
- LED lighting
- Rapidly adjustable and ergonomic drilling depth stop
- Stepless speed adjustment via rotary knob
Gsdpefmh Tlefx Ap Iouc
- Thermal overload protection
- Spindle stop
- Drill guard with electrical interlocking
- Connection cable with CEE plug
- Mechanical feed of the Z-axis
- Including electromagnetic clutch for 3 feed rates
- Drilling cross with push button
- In tapping mode: right-left rotation
TECHNICAL DATA
Continuous/Standard Drilling Capacity (mm)
R1 – 27/32 (in E335/ST60) (100)
R2 – 25/30 (in E335/ST60) (70)
R3 – 30/35 (in E335/ST60) (200)
Max. Thread Cutting Capacity:
R1 = M24x3, R2 = M20x2.5, R3 = M30x3.5
Spindle MK III
Drilling depth: 125 mm
Throat depth: 300 mm
Column diameter: 125 mm
Usable table area (W x D): 590 x 450 mm
Digital speed display
Digital drilling depth display
Depth stop with fine adjustment
Table height adjustment via rack and pinion
Spindle/Table: 150–700 mm
Spindle speed, stepless:
R1 (1-stage) 0–1,000 rpm
R2 (1-stage) 0–1,600 rpm
R3 (2-stage with intermediate gearbox) 0–4,000 rpm
Choice of R1 or R2 at no extra charge
Surcharge for R3: €1,700
Coolant Equipment Accessory (€620)
- Separate container
- Capacity: max. 15 l
- Max. delivery rate: 13.4 l/min
Drilling Package 5 Accessory (€875)
- Bench vise [felix] 2.0 150
- Taper shank MK III/B18
- Reducing sleeve MK III/MK I
- Reducing sleeve MK III/MK II
- Keyless drill chuck B18
3–16 mm (accuracy 0.17 mm)
WARRANTY: 3 years (single-shift operation)
DELIVERY: free domicile, including packaging
NOT THE RIGHT MACHINE?
WE ARE AN OFFICIAL FLOTT PARTNER AND CAN OFFER YOU THE FULL FLOTT PRODUCT RANGE!
REQUEST YOUR OFFER NOW!
Mažas skelbimas
Lüdenscheid
1 163 km
Stulpinis gręžtuvas
FLOTTSB 40 MV Plus (NEU ab Werk)
Skambinti
Būklė: naujas, Gamybos metai: 2026, Standard Equipment
- Thread cutting device
- Control panel with OLED display
- Robust, high-quality drill head cover
- LED lighting
- Rapidly adjustable and ergonomic drilling depth stop
- Infinitely variable speed control via rotary knob
- Thermal overload protection
- Spindle stop
- Drill guard with electrical interlock
- Power cable with CEE plug
- Mechanical Z-axis feed
- Includes electromagnetic clutch for 3 feed rates
- Drill cross with push button
- In thread cutting mode: forward/reverse operation
TECHNICAL DATA
Continuous/Normal drilling capacity (mm)
R1 - 30/35 (in E335/ST60)
R2 - 27/32 (in E335/ST60)
R3 - 35/40 (in E335/ST60)
Maximum thread cutting capacity:
R1= M30x3.5 / R2= M24x3 / R3= M36x4
Spindle taper: MK IV
Drilling depth: 160 mm
Throat depth: 300 mm
Column diameter: 140 mm
Usable table area (W x D): 590 x 450 mm
Digital speed display
Digital drilling depth display
Drilling depth stop with fine adjustment
Rack and pinion table height adjustment
Spindle/table distance: 150-700 mm
Infinitely variable spindle speeds:
R1 (single-speed) 0-1,000 rpm
R2 (single-speed) 0-1,600 rpm
R3 (two-speed with intermediate gear) 0-4,000 rpm
Gujdpfxjlfdufj Ap Ijc
Choice of R1 or R2 without extra charge
Surcharge for R3: €2,250
Drilling package 6 accessories (€910.00)
- [felix] 2.0 150 vice
- Taper arbor MK IV/B18
- Reducing sleeve MK IV/MK II
- Reducing sleeve MK IV/MK III
- Keyless drill chuck B18, 3-16 mm (accuracy 0.17 mm)
WARRANTY: 3 years (single-shift operation)
DELIVERY: free delivery including packaging
NOT THE RIGHT MACHINE?
WE ARE AN OFFICIAL FLOTT SERVICE PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE!
ASK US FOR AN OFFER!
Mažas skelbimas
Lüdenscheid
1 163 km
Stulpinis gręžtuvas
FLOTTSB 20 Plus
Skambinti
Būklė: naujas, Gamybos metai: 2026, Continuous / Standard drilling capacity (mm): 20/23 (in E335/ST60)
Thread cutting capacity (depending on pitch): M12
Spindle: MK II
Spindle speed (stepless): 40–4,000 rpm
Drilling depth (mm): 100
Throat depth (mm): 240
Column diameter (mm): 82
Usable work surface (W x L) (mm): 340 x 280
T-slot size (arm), distance (mm), width dimension (mm):
Number: 2, 125, 13/26
Speed display: Digital
Drilling depth display: Digital
Drilling depth stop: Quick-adjust stop ring
Feed (mm/rev): Manual
Table height adjustment: Rack-and-pinion
Motor: Three-phase 400V with frequency inverter (kW): 1.5
Distance spindle/work surface (mm): 160–880
Machine dimensions without packaging (mm): 355 x 705 x 1825
Machine dimensions with packaging (mm): 572 x 936 x 2142
Weight (kg): 195
Standard accessories:
Thread-cutting device
Control panel with OLED display
Robust, high-quality drill head guard with ergonomically angled front
LED lighting
Quick-adjustable and ergonomic drilling depth stop
Infinitely variable speed control via central rotary knob
EMERGENCY STOP mushroom button
Thermal overload protection
Spindle stop
Gedpfxjir Ir Te Ap Ieuc
Drill guard with electrical interlock
Connection cable with CEE plug
Optional accessories:
Drilling package 3 consisting of:
- Machine vice [felix] 2.0 100 mm
- Quick-action drill chuck 3–16 mm (accuracy 0.17 mm)
- Taper shank MK 2 B18 and reducing sleeve MK 2 to MK 1
€485.00
3-year warranty for single-shift operation
Free delivery within Germany only
NOT THE RIGHT MACHINE?
AS AN OFFICIAL FLOTT SERVICE PARTNER, WE CAN OFFER YOU THE FULL RANGE OF FLOTT PRODUCTS!
REQUEST A QUOTATION!
Mažas skelbimas
Żychlin
430 km
Binder MKF 720 klimatinė kamera
BinderMKF 720
Skambinti
Būklė: labai geros būklės (naudotas), veikimo valandos: 100 h, PERFECT CONDITION, purchased in December 2016
Used for approximately 100 hours
Price new: 46,808 EUR
The BINDER MKF series environmental simulation chamber is perfectly suited for all cold and heat testing based on recognized temperature and climate test standards in accordance with DIN and IEC norms. High operating comfort and comprehensive standard equipment offer clear advantages for everyday use.
Guodpevldnqsfx Ap Ijc
Key features
Temperature range:
-40 °C to 180 °C
Humidity range:
from 10 to 98% RH
Built-in 20 L water reservoir
4 potential-free relay contacts
Preheating chamber technology e™
Programmable anti-condensation protection for samples
Heated observation window with internal LED lighting
Humidity control with capacitive humidity sensor and steam humidification
BINDER Multi Management Software APT-COM™ 4 Basic Edition
Diagnostic system with optical and acoustic alarm
Intuitive controller with touch screen, featuring segment and real-time programming
Internal data logger; measurement values in open format, readable via USB
2 access ports with 80 mm silicone plugs, left and right side
Independent, adjustable class 2 (DIN 12880) temperature safety device with optical alarm
4 castors, two with brakes
230 V socket on the right side panel
Ramp function can be set
Built-in line recorder
Real-time clock
Door heating
Alarm notification in case of lack of water in the fresh water tank
1 stainless steel wire shelf
Leak protection for inlet and outlet hoses up to 1 m height
Stainless steel interior
Halogen-free refrigerant R-404A
Cooling provided by compressor condenser unit
Mažas skelbimas
Hessisch Lichtenau
1 040 km
Trijų fazių galios matuoklis, srovės, įtampos ir galios matavimas, ilgalaikis matavimas, energijos m
BEHAUNITEST Power Analyzer 93555
Skambinti
Būklė: naudotas, Three-phase power meter, current, voltage and power measurement, long-term measurement, energy measurement
3-phase power analyzer, ammeter, voltmeter, digital measuring device, active power, apparent power, reactive power
BEHA type UNITEST Power Analyzer 93555
For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, rotation field detection, energy measurement, harmonic analysis.
Display: LC multifunction display with backlight
Refresh rate: approx. 2 sec.
Data logger: 512 kb non-volatile memory (max. 21,000 measured values, max. 10 measurement series)
Sampling rate: 5s, 30s, 1 min, 2 min (adjustable)
Data transmission: via optically isolated RS232 interface
Manual data storage: max. 99 measurements
Overvoltage category: CAT III 600 V
Power supply: 8 x 1.5V batteries (AA) or plug-in power supply 230VAC / 12VDC (batteries not included)
Voltage measurement:
- 3 input channels with common reference point "N"
- Measuring range: 0 - 600 V AC (RMS)
- Display range: 0 - 999.9 V AC (RMS)
- Resolution: 0.1 V
- Mains frequency: 50 Hz
Current measurement:
- Measuring range inputs I1, I2, I3: 3 - 999.9 A
- Input I4: 3 - 250 A
- Display range: 0 - 999.9 A
- Resolution: 0.1 A
- Jaw opening: 40 mm
Active power:
- Selectable display of active power per individual channel or total value
- Display range: 0 - 999.9 kW
- Resolution: 0.1 kW
Apparent power:
- Calculated from the effective values of voltage and current
- Display range: 0 - 999.9 kVA
- Resolution: 0.1 kVA
Frequency measurement:
Gusdpfx Aex A Imzop Iec
- Measuring range: 45...80 Hz
- Resolution: 0.1 Hz
Accessories:
- Carrying case
- Operating manual
- 4 clamp meters
- 4 test leads with crocodile clips
- RS232 adapter cable
- Plug-in power supply 230VAC / 12VDC
Overall dimensions (W x H x D): 370 x 270 x 170 mm
Total weight: 3 kg
Unit tested, fully functional.
The housing of 2 clamp meters is damaged and the battery compartment is somewhat oxidized, see photos.
Mažas skelbimas
Aalen
1 170 km
Keturių velenų smulkintuvas / smulkintuvas
WEIMAZM 30
Skambinti
Būklė: naudotas, Gamybos metai: 1999, veikimo valandos: 1 200 h, pildymo angos plotis: 1 000 mm, pildymo angos ilgis: 1 250 mm, No. 04531
Four-Shaft Shredder / WEIMA ZM 30
Used, year of manufacture 1999, approx. 1,200 operating hours, machine in very good condition
The four-shaft shredder is designed for bulky and very long wood waste, such as boards, pallets, packaging, and all types of cardboard. It can also shred various plastics. The resulting wood chips are immediately suitable for heating purposes. Special secondary crushers prevent oversized chips.
Hopper opening: 1,250 x 1,000 mm (L x W)
Cutting unit width: 462 mm
Cutting unit length: 562 mm
Cutter disc diameter: 235 mm
Gusdoy Tpg Topfx Ap Ioc
Rotation speed: approx. 25 rpm
2 motors, each 7.5 kW
Throughput capacity: between 350 – 1,250 kg per hour (depending on material and screen hole diameter)
Screen hole diameter: 20 mm
Fuse protection: 50 / 63 A
Suction nozzle diameter: 200 mm
GS-tested, CE compliant
Cutting tools can be sharpened using an angle grinder or bench grinder (see operating manual). The entire cutting unit can be replaced.
Incl. technical documentation
Incl. power connection cable with plug
Transport dimensions approx. 1,450 x 1,250 x 2,150 mm (L x W x H)
Weight approx. 1,300 kg
To avoid possible misunderstandings, on-site inspection by appointment is possible and recommended.
The sale is carried out in as-is condition.
Technical specifications, condition description, year of manufacture, and scope of delivery as per manufacturer’s brochure and/or previous owner, without guarantee.
Subject to prior sale.
No warranty is provided for used machines; the following applies: “sold as seen.”
Payment terms: Prices plus statutory VAT, payment prior to collection or dispatch.
Delivery terms: ex stock
Mažas skelbimas
Calw
1 260 km
Stacionarioji betono maišyklė
LiebherrBetonmix 1,0S
Būklė: labai geros būklės (naudotas), Funkcionalumas: ribota funkcionalumas, Gamybos metai: 2000, For sale: High-quality Liebherr concrete batching plant in excellent condition – includes BIBKO wastewater treatment system
We are offering a used, exceptionally well-maintained concrete batching plant from the renowned manufacturer Liebherr. The plant stands out due to its low operating hours, comprehensive technical documentation, and original delivery condition – all assemblies are from the manufacturer.
Additional benefit:
Included in the offer is a wastewater treatment system from BIBKO Umwelttechnik & Beratung GmbH. This allows for environmentally friendly and economical reuse of residual and wash water, which not only reduces operating costs but also meets the ecological requirements of modern production processes.
Key technical data:
Type: Ringtellermischer R 1.0
Effective mixing capacity: 1.0 m³ compacted concrete per batch
Efficient filling: A 6 m³ truck mixer can be filled in just 6 batches
Theoretical mixing output: 50 m³/h
Practical mixing output: 40 m³/h
Gujdpowlwruefx Ap Isc
Aggregate storage:
Star-shaped storage: 1,200 m³ total capacity
Active storage: 65 m³
Number of aggregate components: 5
Cement silos:
2× cement silos at 40 t each, with overfill protection
1× two-part cement silo at 80 t, with overfill protection
Condition of the plant:
Commissioned: 2000
Out of operation since: 2006
Operating hours: approx. 3,500 (estimated)
Condition: Very good – minimal use, excellently maintained
Previous owner: Original owner
Originality: All assemblies originally from Liebherr
Documentation: Fully available (electrical circuit diagrams, foundation plans, static calculations, etc.)
Thanks to its robust and well-designed construction, the plant can be easily dismantled and reassembled due to the predominantly bolted design. The control cabinets are connected via plug-in connectors – please refer to the attached PDF documents for details.
Additional services on request:
We are happy to support your project with experienced partner companies for:
Dismantling and reassembly
Electrical commissioning (industrial electronics technicians)
Organization of transport by reliable freight forwarders
This ensures your new plant can be quickly and professionally commissioned at a new site.
Interested?
We look forward to your inquiry and will be happy to assist you with any questions you may have!
Mažas skelbimas
Bielefeld
1 063 km
Pjovimo stalas / Pjovimo įrenginys / Ploteris
expert international gmbhcut expert ecocam 2
Skambinti
Būklė: naudotas, Gamybos metai: 2026, veikimo valandos: 10 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2026-078, darbinis plotis: 1 600 mm, darbinio aukščio: 100 mm, pjovimo plotis (maks.): 1 600 mm, įrankių magazino lizdų skaičius: 2, Used Machine CNC Cutter/Plotter Cutting Area in X and Y: 1,500 x 1,600 mm (demonstration model)
Multifunctional CAM cutting system utilizing CNC knife technology for 2D cutting of paper, cardboard, fabric, industrial textiles, foam, and other flat, semi-flexible, or rigid non-metallic materials.
Equipment of the used machine:
• 1 cutting bridge and 1 multifunctional tool head
• Multifunctional tool head for holding 2 interchangeable tools
• Powerful vacuum blower for material fixation
• Standard grey conveyor belt table (conveyor)
• Maximum material height 100mm
Additional tools available (on request):
• EOT electric oscillating knife
• POT pneumatic oscillating knife
• PRT powered rotary knife
• UCT universal cutting knife (drag knife)
• KCT kiss-cut tool
• CTT creasing tool
• V-Cut angle cutting knife
• Print mark detection
• Camera registration
• Punching tool for notches or holes
• Milling unit with extraction system
User-friendly
• Easily replaceable cutting tools, "PLUG & CUT"
• Intuitive user interface
• Quick blade changes
• Vacuum zones activated at the push of a button
Rapid ROI
• Low costs with high added value
Guodpfswgc I Rex Ap Ijc
• Optimal material utilization through nest expert software modules (not included)
• High speed
• Consistent precision
Technical Data:
• Short cutting times thanks to high positioning speed up to 90 m/min
• Repeat accuracy +/- 0.25 mm
• Cuts single or multiple layers
• Suitable for both sheet and roll material (optionally extendable with suitable unwinder)
• Quick ROI
(Product image for illustration only)
The machine is CE-certified.
Mažas skelbimas
Bielefeld
1 063 km
Cutter cut expert ecocam 2 / Ploteris
expert international gmbhcut expert ecocam 2
Skambinti
Būklė: naudotas, Gamybos metai: 2026, veikimo valandos: 15 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 204065, Used Machine CNC Cutter/Plotter Cutting Area X and Y: 2,500 x 2,100 mm
Multifunctional CAM cutting system utilizing CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other sheet-type, semi-flexible or rigid non-metallic materials.
Equipment of the used machine:
• 1 cutting bridge and 1 multifunctional tool head
The machine is sold with a powered circular knife, electrically oscillating knife, and a routing spindle (including extraction device)
• Multifunctional tool head for holding up to 2 interchangeable tools
• High-performance vacuum blower for material fixing
• Standard equipped with a grey conveyor belt table (conveyor).
Green-blue exchange conveyor available (offers high contrast for dark materials)
Further tools can be added (on request):
• EOT electric oscillating knife
• POT pneumatic oscillating knife
• PRT driven circular knife
• UCT universal knife (drag knife)
• KCT kiss-cut tool
• CTT creasing tool
• V-Cut angle cutting knife
• Printer mark detection
• Camera registration
• Punch tool for notches or holes
• Routing spindle with extraction device
User-friendly
• Easy tool changes, "PLUG & CUT"
• Intuitive user interface
• Quick blade replacement
• Vacuum zones activated at the click of a button
Gjdpfx Aeif Ek Rjp Iouc
Rapid payback
• Low cost with high added value
• Optimal material utilization via nest expert software modules (not included)
• High speed
• Consistent precision
Data:
• Short cutting times thanks to high positioning speed up to 90 m/min
• Repeat accuracy +/- 0.25 mm
• Cuts single or multiple layers
• Suitable for both sheet and roll materials (expandable with matching unwinder)
• Rapid payback
(Product photo as example)
The machine is CE certified.
Mažas skelbimas
Bielefeld
1 063 km
Tekstilės pjovimo staklės / pjaustyklė
expert international gmbhcut expert ecocam 2
Skambinti
Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, veikimo valandos: 15 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2002-045, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm
Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid non-metallic materials.
Equipment of the used machine:
• 1 cutting bridge and 1 multifunctional tool head
The machine is sold with a CCD camera for detecting print marks
• Multifunctional tool head for holding 2 interchangeable tools
• High-performance vacuum blower for material fixation
• Standard grey conveyor belt table (conveyor) included
Blue-green exchange conveyor available (offers high contrast for dark materials)
Further tools can be added (on request):
• EOT electric oscillating knife
• POT pneumatic oscillating knife
• PRT driven rotary knife
• UCT universal cutter (drag knife)
• KCT kiss-cut tool
• CTT creasing tool
• V-Cut angle cutting knife
• Print mark detection
• Camera registration
Gujdpjfnlkwofx Ap Ijc
• Punch tool for notches or holes
• Milling unit with extraction system
User friendly
• Easy-to-change cutting tools, “PLUG & CUT”
• Intuitive user interface
• Quick blade change
• Vacuum zones can be activated at the touch of a button
Rapid amortization
• Low cost with high added value
• Optimal material utilization thanks to nest expert software modules (not included)
• High speed
• Consistent precision
Data:
• Short cutting times thanks to high positioning speed up to 90 m/min
• Repeat accuracy +/- 0.25 mm
• Cuts single or multiple layers
• Suitable for both sheet materials and roll materials (can be expanded with suitable unwinder)
• Rapid amortization
(Product photo shown as example)
The machine is CE-certified
Mažas skelbimas
Aumühle
1 026 km
PRIOLION ličio jonų saugos spinta
PriolionLI92.195.120.07.4
Skambinti
Būklė: beveik kaip naujas (naudotas), Li-ion Safety Cabinet – Fire Protection Cabinet PRIOLION Type LI92.195.120.07.4, as new condition
🧰 Product Features
• Manufacturer: Priolion
• Type: LI92.195.120.07.4
• Condition: as new, see photos
• Colour: Light grey - RAL 7035
• Dimensions: 232 x 66 x 225 cm
• Own weight: approx. 706 kg
• Fire resistance: up to 90 min
• Year of manufacture: 2024
• Permanently self-closing doors with oil-damped door closers
• Double-leaf design, both doors usable, with center post
• Doors operable with one hand and lockable with profile cylinder
• Cabinet colour: light grey RAL 7035
Gjdpfx Apow Hw S Ro Ijuc
• GS and CE certified
• Test requirements & standards:
o DIN EN 1363-1 & DIN EN 1363-2: Fire resistance tests
o DIN EN 14470-1 & DIN EN 14470-2: Fire-resistant storage cabinets
o DIN EN 16121: Non-domestic storage furniture
o DIN EN 16122: Storage furniture for domestic and non-domestic use
o DIN EN ISO 13854
• Included: 4 grid shelves, spill containment trays and socket strips, high-quality CPL surface inside and outside, made of non-combustible building material class A2 - s1, with control unit (optical and acoustic status indicators), integrated smoke detector inside the cabinet (automatically triggered in the event of fire), ready to plug in for direct connection to mains power, with surge protection, automatic closure of supply and exhaust air ducts in the event of fire
💰 Price €7,900 net excl. VAT / New price over €12,000
• Volume discounts: on request
• Shipping costs: Europe-wide upon request
• Delivery: Immediately available
• Viewing and collection: possible at any time by appointment
Constantly over 5,000 linear meters of pallet racking of various manufacturers in stock
(Subject to alterations and errors in technical data, information and prices as well as prior sale! See our Terms and Conditions, all prices excl. VAT ex works.)
Mažas skelbimas
Hofheim am Taunus
1 184 km
Konsolinis stelažas, 2,60 m H, 80 cm rankenos, 750 kg/
BruckkampKragarmregal
Skambinti
Būklė: naujas, Cantilever rack, single-sided, frame height 2.60 m, 80 cm deep arms, 750 kg per arm, hot-dip galvanized – New equipment:
Price ex location incl. loading!
Price: €1,480 (net)
Transport/packaging costs within Germany (excluding islands): €400 (net)!
You can, of course, build longer or shorter rack units by omitting or purchasing additional frames (or by varying the bay spacing); the example with 4 frames is simply the most common racking solution!
A hot-dip galvanized cantilever racking system, consisting of:
German premium manufacturer, new equipment
Description:
- Upright, single-sided, 2,600 mm high, hot-dip galvanized
- Foot and arm depth 800 mm
- Each with 3 height-adjustable cantilever arms
- Load capacity with load center at 400 mm
- 750 kg per arm / 2,250 kg per upright
With 4 uprights per arm level: 4 x 750 kg = 3,000 kg
Profiles: Uprights (frames) IPE 140, arms IPE 80
including longitudinal and diagonal bracing
Standard bay spacing between uprights is 1.30 m.
Other available bay spacings from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m!
For bay spacings from 1.50 m, a small surcharge applies to the given price!
Special dimensions (other bay spacings) also available on request, but incur additional charges and longer delivery times, as they are custom fabricated!
Unless you specify otherwise for bay spacing, we deliver the rack with a bay spacing of 1.30 m.
In this case, the length for one rack row with 4 uprights (3 bays) is approx. 4 m.
Delivered with all bolts and nuts (shipping within Germany via parcel service directly from Würth), without floor anchors.
If additional arms per upright are used, please ensure that the maximum specified load capacity of the upright is not exceeded; otherwise, the maximum usable load per arm decreases!
Other configurations (upright height, arm lengths, arm types, etc.) are available – please contact us!
Available special equipment (at extra cost), see photos attached:
- Foot section with impact protection
- Foot section with large impact protection
- Foot section with tyre guard
- Cantilever arm with impact protection
- Cantilever arm with plug-in roll-off protection
- Clamp-on roll-off protection
- Grating decks
- Conversion kit for storing pallets
Gujdpfsnwmwvsx Ap Ijc
Photos are examples of single-sided racks and/or the materials used!
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Topole
444 km
Juostų rišimo mašina TV02
Schneider&OzgaTV02
Skambinti
Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2015, For sale, we offer a strapping machine Model TV02 from the manufacturer Schneider & Ozga.
Condition: Excellent, like new, never used.
The fully automatic strapping machine TV 02 impresses with its maintenance-free direct drives and extremely simple operation.
- Strapping capacity: 30 single strappings or 15 parallel strappings per minute
- Strap width: 5 to 12 mm
- Various frame sizes available
- Conveyor belts with four straps
- Off-center strap closure
TECHNICAL SPECIFICATIONS
- Performance: Up to 30 single strappings/minute, up to 15 parallel strappings/minute
- Package size: Width: max. 600 mm, min. 160 mm; Height: max. (without press) 650 mm, max. (with press) 550 mm, min. 10 mm
- Package weight: max. 25 kg
- Strapping material: Polypropylene tape (PP tape)
Width: 5 - 12 mm; Thickness: min. 0.35 - 0.70 mm
- Seal type: Thermo-welded seal
- Strap coil: Core diameter: 200/228 mm, Outside diameter: approx. 450 mm, Width: 165-210 mm
- Electrical: 230 V, 1 phase, 50 Hz
- Power consumption: 1.1 kW at 230 V
- Pneumatics: Operating pressure: 4 bar; Consumption for single machine: 90 l/min (3 l/strapping) free air
- Pressing force: 200 N (cylinder diameter 25 mm)
- Strap tension: max. 200 N
- Conveyor speed: approx. 26 - 59 m/min
STANDARD EQUIPMENT
· Extraction unit
· Automatic strap feed
· Strap sensing
· Infeed and outfeed control with plug connector
· Color: RAL 5007 (brilliant blue)
· Infinitely adjustable table conveyor speed
· Short heating-up time
· Motors without mechanical brake
· PLC control with four adjustable programs for different products
· Infinitely adjustable strap retraction
· Touchscreen, lockable with a user-defined code
· Strapping counter
· Maintenance-free direct drives
Price: €12,000 net. Machine in stock, immediately available.
Gjdpfx Aeixz Tcsp Ieuc
Machine location: 89-600 Chojnice, Poland
If interested, please contact us.
Mažas skelbimas
Sittard
1 285 km
Stiklo keltuvas / Vakuuminis keltuvas
SmartGroupSG350 | 2025 (Demo)
Skambinti
Gamybos metai: 2025, būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 675 kg, kėlimo aukštis: 3 800 mm, kėlimo galia: 350 kg/m, Įranga: CE žymėjimas, === KEY SPECIFICATIONS ===
Model: Smartgroup SG350
Year: 2025 (Demo Unit)
Condition: Demo / Like New
Lifting Capacity: 350 kg
Max. Lifting Height: 3,800 mm
Godpfxsxwm Ruo Ap Ieuc
Own Weight: 675 kg
Drive: 1WD Rear-Wheel Drive
Speed: 5 km/h
Dimensions (L × W × H): 1.80 × 0.75 × 1.85 m
Batteries: 4 × 105 Ah AGM
Charger: Integrated Onboard Charger
Overload Warning System: Yes
Proportional Controls: Yes
Pick & Carry Capacity: 350 kg
Turning Radius (sideways): 2.1 m
CE Certification: Yes
=== HIGHLIGHTS ===
• 2025 demo unit – excellent condition
• Compact, lightweight, and highly maneuverable (only 675 kg)
• Strong pick & carry performance with 350 kg load capacity
• AGM battery pack with integrated charger – plug & play
• Proportional control for precise movements
• Overload warning system for enhanced safety
• Ideal for glazing, construction, assembly, warehousing, and industrial applications
• CE-certified and immediately ready for use
=== CONDITION ===
Demo condition – used for demonstrations only.
Fully inspected and tested by certified technicians.
No damage, no defects, 100% operational.
=== LOCATION & DELIVERY ===
Location: Sittard, Netherlands.
Worldwide shipping available.
Price: €22,250 plus VAT (EXW Sittard).
=== DELIVERY ===
• Crane loading available upon request
• Worldwide transport organized by Collé Rental & Sales
• Professional handling with complete CE documentation
Mažas skelbimas
Nieuwkuijk
1 295 km
Generatorius
RTE Ricardo50kVA
Skambinti
Būklė: naujas, Gamybos metai: 2025, veikimo valandos: 1 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: RTE 50kVA, bendras svoris: 900 kg, kuro tipas: dyzelinas, bakelio talpa: 100 l, spalva: geltonas, galia: 39,72 kW (54,00 AG), išėjimo srovė: 76 A, išėjimo įtampa: 400 V, išėjimo dažnis: 50 Hz, išėjimo srovės tipas: trifazis, nominali galia: 42 kW (57,10 AG), nominali (akivaizdi) galia: 50 kVA, nuolatinė galia: 42 kW (57,10 AG), nepertraukiama (akivaizdi) galia: 50 kVA, bendras ilgis: 2 150 mm, bendras plotis: 920 mm, bendras aukštis: 1 200 mm, sukimosi greitis (maks.): 1 500 aps./min, variklių gamintojas: Ricardo, aušinimo tipas: vanduo, kuras: dyzelinas, kuro bako talpa: 100 l, įėjimo dažnis: 50 Hz, triukšmo lygis: 75 dB, įvesties srovės tipas: trifazis, The RTE 50 is a diesel generator with a capacity of 50 kVA, suitable for industrial and commercial applications where a reliable power supply is required. The generator features an automatic start system, making the unit suitable for emergency power applications. The noise level is 65 dB(A), ensuring relatively quiet operation during use. Fuel consumption is approximately 6 liters per hour, contributing to efficient operation even during prolonged use. This generator is designed for situations where a constant and stable power supply is essential, such as construction sites, production environments, or as backup during power outages. The robust design enables long-term use under various conditions.
Technical specifications:
- Type 6739 Ricardo Diesel Engine
- Power: 50 kVA
- Fuel: Diesel
- Fuel consumption: approx. 6 liters per hour
- Start type: Automatic
- Noise level: 65 dB(A)
- Frequency: 50 Hz
- Output current: 76 A
- Weight: 900 kg
- Tank capacity: 99 liters
- ATS
- AVR
- Engine: Ricardo Diesel type ZH4100ZD
Sockets: 3x 220V 16A and 1x 400V 32A, with residual-current circuit breakers on each socket. NOTE! We are the only supplier on the market offering this option! Conversion to a 63A/400V plug is possible at an additional cost of €295 (ex VAT).
Our items are, if in stock, available for immediate pickup from our location in Nieuwkuijk. Prefer delivery? No problem! We deliver throughout the Netherlands.
As a family business, we value personal contact—short lines, thinking along with the customer, and providing tailored advice. Since our founding in 1975, we have been expanding our company, characterized by:
- Over 50 years of experience
- Personal advice for your projects
- Large stock and rapid delivery times
Gedpfozb D Nqox Ap Ieuc
We prepare all generators to be ready for start-up and operation.
Service and repairs available as well.
In stock at Aggregaat.store / Van Delft Staal.
Mažas skelbimas
Borken
1 181 km
Temperatūrinio šoko bandymo kamera
WEISSTS 130
Skambinti
Būklė: labai geros būklės (naudotas), Weiss Temperature Shock Test Chamber
We are offering you a temperature shock test chamber.
Weiss Temperature Shock Test Chamber, air-cooled
(The compressor has been replaced!)
Specification:
Temperature range, hot chamber: +60°C to +220°C
Temperature range, cold chamber: -10°C to -80°C
Transition hot/cold chamber: 10 s
Temperature constancy: ±1 K
Dimensions and further data:
External dimensions: Height 1990 mm
Width (without/with swing arm): without approx. 1820 mm / with approx. 1915 mm
Depth (without/with test chamber door): without approx. 900 mm / with approx. 1155 mm
Test basket (test chamber) dimensions: Height 450 mm, Width 500 mm, Depth 600 mm
Volume: 130 liters
Max. chamber load: 20 kg
Gjdpsk E Htysfx Ap Ieuc
Max. floor load in test chamber: 20 kg
Cooling water pressure: min. 2 to max. 6 bar
Max. pre-fuse: 35 A (plug 32 A CEE)
Sound pressure level, 1 m in front of the unit: approx. 65 dB(A)
Connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW
Rated current: 26.0 A
Refrigerant: R 404A / R23
Weight: approx. 950 kg
Type: TS 130
Condition: used
Scope of delivery: (See image)
(Subject to technical modifications and errors!)
For further questions, we are happy to assist you by phone.
Palengviname jums paiešką: "plūgas"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
Naudota Plūgas (858)
Dabar ieškokite visame Machineseeker su daugiau nei 200 000 naudotų mašinų.Naršykite populiariausius mašinų pavadinimus:

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo




































































































































































































































