Pjovimo Gija pirkti naudotą (9 410)

Būklė: naudotas, Naudota mašina Pagaminimo metai: 1991 Pilnai automatinė, stovima, Pjovimo diapazonas: 5.300 x 2.200 mm (pjovimo plotis x pjovimo aukštis), Pjūklo disko skersmuo: 300 mm, Valdymas vertikaliems ir horizontaliems pjūviams, su ALU atlenkiamais ribotuvais ir ALU vidurine atrama, su SUPER-CUT priešpjovimo įrenginiu Dedpfjx Rr D Ajx Ac Dour Variklis: 3 kW - 400 V Prieinamumas: iš karto Vieta: Röllbach

Būklė: naudotas, Gamybos metai: 2005, Apdirbimo matmenys: 3000 x 1600 x 180 mm Aukšto slėgio siurblys 60 AG / 45 kW Modelis E-60 Darbinis slėgis 4 130 BAR Vandens suvartojimas 4,69 litro/min. Programinė įranga: Watercad-CAM Automatinis pjovimo optimizavimas Sandėliavimo vieta: klientas Dsdpfx Acexgfbqj Dour

Būklė: labai geros būklės (naudotas), Ilgis apie 3 200 mm Plotis apie 1 400 mm Aukštis apie 1 600 mm Varikliai: 2 Pakreipiamas stalas: Taip Djdpfx Acoxwbpfj Dour Tvirta, kombinuota Bäuerle KFL tipo medžio apdirbimo staklės sujungia formatinį pjūklą, ilgos skylės gręžimo stakles ir staklinę frezą su padavimo mechanizmu viename įrenginyje, tiekiama su gausia priedų komplektacija. Riedantis stalas: taip

Būklė: naudotas, Gamybos metai: 1997, Wheel diameter – max. 275 mm Wheel width 150 mm Module – max. 6 Module – min. 1.5 Total connected load 62 kW Machine weight approx. 12 t Required space approx. 4.7 x 4.4 x 2.45 m DESCRIPTION Wheel diameter – max. 275 mm Wheel width 150 mm Module – max. 6 Module – min. 1.5 Workpiece diameter – max. 275 mm Gear width max. 5.5 mm Helix angle 0–60° Number of teeth 5–120 Transmission ratio min. 1:1 Transmission ratio max. 1:10 Cutter drive motor 20 kW Workpiece drive 14.5 kW Dusdoul Etdepfx Ac Der Total connected load 62 kVA Machine weight approx. 12 t Required space approx. 4.7 x 4.387 x 2.45 m Tool Spindle (D-axis) - Workpiece spindle speed (infinitely variable) 60 to 350 rpm Tool Positioning Axis (E-axis) - Swivel range 0 to 360° - Max. swivel speed 19.5°/s Workpiece Spindle (B-axis) - External taper acceptance diameter (1:4) 140 mm - Standard internal taper (1:20) 99.218 mm - Max. workpiece spindle speed 300 rpm - Workpiece spindle bore 90 mm Workpiece Positioning Axis (Y-axis) - Travel 870 mm - Max. travel speed 4.5 m/min Indexing Rotary Axis (A-axis) - Swivel range 315° - Max. swivel speed 40°/s Axis Offset (Z-axis) - Travel range max. +/- 50 mm - Max. travel speed 0.657 m/min Workpiece Swivel Axis (C-axis) - Swivel range -8.5 to 98° - Max. swivel speed 21.5°/s Milling Depth Axis (X-axis) - Travel -25 to 640 mm - Max. travel speed 6 m/min Machine Distance (V-axis) - Travel 150 mm - Max. travel speed 1.6 m/min

Būklė: labai geros būklės (naudotas), Labai geros būklės. Dsdpfoxcll Uex Ac Dour

Būklė: labai geros būklės (naudotas), Modelis: Altendorf F45 Duedpsygw Nnefx Ac Dsr paruoštas darbui.

Būklė: naudotas, Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, ZINSER Oxy-Fuel Cutting System – CNC 500 – Table 3,000 × 8,000 mm Industrial Design | CNC Controlled | Immediately Available Short Description: For sale is a robust Zinser oxy-fuel cutting system with Zinser CNC 500 controller and large cutting table (3 × 8 m). The system dates from the 1980s and was fully functional until it was professionally disassembled. The machine is currently disassembled; therefore, a test run is not possible. Inspection of the system and all components is of course possible. Technical Data: - Manufacturer: Zinser - Machine type: unknown - Year of manufacture: 1980s - Control: Zinser CNC 500 - Cutting process: Oxy-fuel / Flame cutting - Cutting table: approx. 3,000 × 8,000 mm - Condition: used, disassembled Condition & Classification: - System in operation and fully functional until disassembly - Disassembly was orderly and professional - Heavy-duty industrial design - Mechanics, table and gantry in solid condition - Not a modern high-speed CNC due to age, but: x very robust x straightforward technology x ideal for reactivation, upgrading, or continued service Scope of Delivery: - Cutting table 3 × 8 m - Gantry / traversing carriage - CNC control unit Zinser CNC 500 - Existing flame cutting components - Sale as inspected Inspection & Collection: - Inspection possible by appointment Dsdpfxoyanbbe Ac Deur - No test run as system is disassembled - Loading and transport to be arranged by the buyer - Location: Germany

Būklė: naudotas, Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, KALTENBACH Saw and Drilling Line – KBS 851 DGNC + APS 1003 – up to 1,000 mm – Year of Manufacture 1999 General Information: Manufacturer: Kaltenbach Machine Type: Automatic sawing and drilling line for steel profiles Bandsaw: KALTENBACH KBS 851 DGNC Drilling Unit: KALTENBACH APS 1003 Year of Manufacture: 1999 Condition: used, fully functional Location: Germany Availability: Dismantling from mid / end of March 2026 Inspection: The line is operational and can be viewed under power Sale: without warranty or guarantee Machine Description: For sale is a complete Kaltenbach saw and drilling line for processing heavy steel profiles. The line consists of a CNC-controlled bandsaw KBS 851 DGNC and a drilling unit APS 1003, including comprehensive infeed and outfeed roller conveyors and cross conveyors. Duodpfxsyak Ane Ac Djr The system is currently in operation and has been reliably used in steel construction up to now. It is ideal for efficient processing of beams and profiles in both series and project-based production. Typical Fields of Application: - Steel construction / hall construction - Metal fabrication - Beam processing (IPE, HEA, HEB, UPN, etc.) - Series and single-part production Technical Data: Bandsaw KBS 851 DGNC: - Maximum beam height: up to 800 mm - Mitre cutting: swivel range +45° / –45° both sides - CNC-controlled length positioning - Automatic sawing operation Drilling Unit APS 1003: - Maximum beam height: up to 1,000 mm - CNC-controlled profile processing via drilling portal - Suitable for web and flange processing Roller and Transport Conveyors: - Roller conveyor width: 1,000 mm - Infeed roller conveyor: approx. 15,000 mm - Outfeed roller conveyor: approx. 15,000 mm - Infeed cross conveyor: approx. 4,000 mm - Outfeed cross conveyor: approx. 4,000 mm Condition: - The system is complete and fully operational - Currently in use - Age- and usage-related signs of wear - Sold as is - No warranty or guarantee Scope of Delivery: - Bandsaw KBS 851 DGNC - Drilling unit APS 1003 - Infeed and outfeed roller conveyors - Cross conveyors in infeed and outfeed - Control cabinet / operator panel - Existing safety and protective equipment - Documentation as available Dismantling & Loading: - Dismantling by the buyer - Dismantling possible from the end of March 2026 - On-site available: * Forklift * 2 overhead cranes each with 5 t lifting capacity - Good access and loading conditions

Būklė: geras (naudotas), Trumpf Trumatic WS 2500 buvo naudojama vandens pjovimui. Atnaujinome naują CNC stalo ir HD siurblio valdymo bloką. Valdymo blokas visiškai veikiantis (anksčiau naudotas mūsų kliento). Nuotraukose matote visus komponentus: valdymo spintą, AC servomotorus ir ekrano laikiklį. Jei turite senesnį CNC stalo modelį (pvz., kompiuterį su DOS operacine sistema) ir vandens pjovimo HD siurblį (su lietimui jautriu monitoriumi – mūsų gaminys), galime įdiegti naują valdymo bloką pagal jūsų poreikį. Dedjtghf Uepfx Ac Dsur

Būklė: labai geros būklės (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, - Su formatinio pjūklo vežimėliu Duedpeym Dzqofx Ac Dsr Pagaminimo metai: 1994

Būklė: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 154.1004.094, Professionelle Neolt Electro Foam Trim Plus 310 Horizontalschneidemaschine für Schaumstoffplatten, PVC, Karton und ähnliche Materialien. Dies ist ein hochwertiger italienischer Industrieschneider mit einer maximalen Arbeitsbreite von 310 cm – ideal für Werbetechnik, Druckindustrie und industrielle Fertigungsumgebungen. Hauptmerkmale: • Hersteller: Neolt (Italien) • Modell: Electro Foam Trim Plus 310 • Arbeitsbreite: 310 cm • Elektrisches Schneidsystem • Hochpräzise Schnitte • Geeignet für Schaumstoffplatten, PVC, Karton und ähnliche Materialien • Inklusive Zubehör: - Mehrere Messerhalter: 5 mm, 10 mm, 20 mm und 30 mm - Ersatzklingen enthalten - Original-Bedienungsanleitung - Elektrische Ersatzteile (Leiterplatten etc.) - Zusätzliches Zubehör und Komponenten Zustand: Die Maschine befindet sich in gutem, voll funktionsfähigem Zustand. Die Schneidegenauigkeit ist sehr hoch. Der Grundkörper ist sauber und gepflegt, die Auflagetische weisen normale Gebrauchsspuren auf. Weitere Informationen: • Maximale Schnitthöhe bis zu 30 mm (abhängig vom Messerhalter) • Derzeit mit 10 mm Messerhalter ausgestattet Dsdpfx Aceywpcpe Djur • Auf Rollen montiert für einfachen Transport • Inklusive Auflagetischen Logistik: Das Gerät ist sofort abholbereit und befindet sich in Finnland. Unterstützung beim Verladen möglich. Zusätzliches Video der Schneidefunktion auf Anfrage erhältlich! Komplettes Set mit Zubehör und Ersatzteilen – sofort einsatzbereit für den professionellen Einsatz! Schlagwörter: Schaumstoffplatten-Schneider Neolt Schneidemaschine elektrischer Schneider Horizontalschneider Foam Trim Werbetechnik-Ausrüstung Großformatschnittgerät

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, mašinos/transporto priemonės numeris: 10081495, The ATOM FlashCut 3010 plotter is an advanced digital knife cutting machine, engineered for precise and rapid cutting of a wide range of materials such as leather, textiles, foam, and plastics. It is particularly valued in the footwear, leather goods, and in the production of gaskets and technical components. ⸻ 📐 Technical specifications • Working area: 3000 × 1000 mm • Power consumption: 13.5 kW • External dimensions: 3765 × 1955 × 2805 mm (height) Dedjykzvmjpfx Ac Deur • Weight: 1320 kg ⸻ ⚙️ Key features • Versatility: The plotter enables cutting of a variety of materials, from soft leathers to hard plastics. • Ergonomics: The compact and ergonomic design provides ease of use and space saving in the production facility. • Vacuum system: Dual-zone vacuum system ensures stable material hold-down during cutting operations. • Cutting head: Supports various tools, including oscillating knives and creasing tools, increasing production flexibility. ⸻ 🏭 Industrial applications The ATOM FlashCut EASY 3010 plotter is used in: • Footwear and leather goods manufacturing • Gasket and technical component production • Textile and furniture industries • Packaging and advertising material production ⸻ 🛠️ Additional information The 3010 model is highly recommended for companies seeking a solution that combines high cutting precision with production efficiency. Thanks to the capability to process large-format materials and support for various cutting tools, this plotter is suitable for both mass production and bespoke project execution.

Būklė: naudotas, Gamybos metai: 2001, Wood dimensions to be processed: Incoming lengths min/max: 500 – 6500 mm; Full optimization up to max. 1500 mm. Incoming widths min/max: 40 – 300 mm. Incoming thicknesses min/max: 15 – 120 mm. Maximum wood cross-sections: 300 x 40 mm, max. 200 x 120 mm. Fixed lengths after saw: min. 510 – 2800 mm. Special application: Cutting of blocks, length min/max: 100 – 200 mm (Note: multiple block length during sorting, blocks are transported to the end of the sorting line and drop into customer-side mesh boxes). Cut/trimming tolerance: +/- 0.8 – 1.5 mm (for wood with minimum resin content and even surface. Tolerance up to 1 m fixed length, max. tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm. Curvature of wood in all directions: max. 10 mm per meter length. Types of wood: Softwood or hardwood. Machine performance: Feed speed continuously adjustable up to max. 230 m/min; cutting cycle 0.6 – 1 s. To determine the practical daily output, an effectiveness factor dependent on the customer’s production conditions must be considered. Infeed and saw working height: 900 mm (install required on customer-side platform, saw requires concrete base). Sorting working height: 2000 mm. Connection values: Total electrical connection load approx. 18 kW. Operating voltage: 380 Volt / 50 Hz. Voltage fluctuations max. 5 %. Air consumption approx. 1200 NL/min. Operating pressure approx. 8 bar. Extraction velocity approx. 30 m/s. Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B. Duodpfxjw Sy T Hj Ac Dsr POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge. Pos. 2: Support roller without drive, at the end before steel table for easier feeding. Pos. 3: Length measuring station with built-in fluorescence camera for detecting defect markings. Pos. 4: Automatic non-contact width measurement. Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with built-in waste chute incl. equipment package for large wood cross-sections. Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control. The following are available for processing: - max. 16 product groups - max. 8 qualities per product group - max. 200 fixed lengths per product group. Pos. 6: Discharge conveyor belt as sorting station with drive unit, length 7500 mm. Pos. 7: 2 ejectors mounted on discharge conveyor belt. Location: Nattheim

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2014, valdymo tipas: CNC valdymas, automatizacijos lygis: automatinis, pavaros tipas: elektrinis, lazeri tipas: šviesolaidinis lazeris, lazerio galia: 2 000 W, maks. lakšto storis: 12 mm, nerūdijančio plieno lakšto storis (maks.): 6 mm, aliuminio lakšto storis (maks.): 6 mm, vario lakšto storis (maks.): 6 mm, stalo ilgis: 3 000 mm, stalo plotis: 1 500 mm, aušinimo tipas: vanduo, bendras ilgis: 9 000 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, aušinimo blokas, avarinis stabdymas, centralizuota tepimo sistema, dokumentacija / vadovas, dulkių šalinimas, dūmų ištraukimas, Ermaksan Fibermak Momentum Gen-2 Fiber Laser Cutting Machine General Information • Manufacturer: Ermaksan (Turkey) • Model: Fibermak Momentum Gen-2 (3015) • Year of production: 2014 • Condition: Used – very good technical condition • Location: Spytkówki 64-000 • Sale price: 110,000 PLN + 23% VAT _____ Technical Specifications Parameter Value Laser power 2,000 W (IPG / IPS Fiber Laser) Duedpfxsyuypto Ac Djr Working area 3000 × 1500 mm Laser type Fiber Control system CNC Beckhoff CP6242 Max. cutting speed 100 m/min (X/Y axes) Max. cutting thickness: steel up to 12 mm Max. cutting thickness: stainless steel up to 6 mm Max. cutting thickness: aluminium up to 6 mm Positioning accuracy ±0.05 mm Worktable Automatic exchange table (dual shuttle) Cooling unit Chiller included Cutting head Precitec HPSSL Plus Auto Focus Axis drives Magnetic linear drives (Linear Drive) Software Lantek Expert Cut CAD/CAM Machine weight approx. 11–12 tons _____ Additional Equipment • Automatic nozzle calibration and cleaning • Ermaksan Dust Collector • Waste removal conveyor system • Complete IPG Chiller cooling package • Touchscreen control, Beckhoff operator panel • Technical documentation and user manuals _____ Description The Ermaksan Fibermak Momentum Gen-2 is a proven design for precision cutting of steel, stainless steel, and aluminium sheets while maintaining low operating costs and high cut edge quality. This model ensures stable operation thanks to an efficient fiber laser source and dynamic linear drives. An excellent solution for manufacturing companies requiring a fast, accurate, and energy-efficient sheet metal cutting machine. The machine is in continuous operation, regularly serviced, and fully functional. _____ Purchase Benefits • Directly from the user – possibility to demonstrate the machine in operation • Ready for on-site power-up and testing • Option to arrange transportation and installation • Assistance with commissioning and operator training

Gamybos metai: 2022, būklė: naujas, Funkcionalumas: visiškai funkcionalus, Visiškai naujas įrenginys, supakuotas. Netiko mūsų patalpai, nes negalima sumontuoti dviem būdais. Įsigyta iš KATOMSK AS. Duodpfx Aceyrb Swj Djr

Gamybos metai: 2019, būklė: naujas, Cutting discs TYROLIT 800mm x 9mm x 100mm STEEL Max: RPM - 1900, 80m/s Price per piece Duedpfohga Hqox Ac Der Packed 30 pieces per box

Gamybos metai: 2020, būklė: naujas, Cutting discs PFERD 800mm x 9.8mm x 100mm 100 PT 800 R HD STEEL Price per piece Dujdpfxshf T Tcs Ac Dsr 30 pieces packed in one box Available quantity: 150 pieces

Būklė: naudotas, Gamybos metai: 2005, galia: 7,5 kW (10,20 AG), pjovimo aukštis (maks.): 170 mm, pjovimo plotis (maks.): 1 100 mm, pjūklo disko skersmuo: 500 mm, pjūklo disko nuolydžio reguliavimas: 46 °, aukščio reguliavimo tipas: hidraulinis, pjūklų disko skylė: 30 mm, sukimosi greitis (maks.): 5 500 aps./min, sukimosi greitis (min.): 2 800 aps./min, bendras ilgis: 3 300 mm, bendras plotis: 2 000 mm, bendras aukštis: 1 800 mm, bendras svoris: 1 500 kg, Įranga: CE žymėjimas, No. 04528 Martin T 73 BASIC Panel Saw Used, year of manufacture 2005 Sliding table: 3000 mm Max. cutting height: 170 mm Max. saw blade diameter: 500 mm Saw blade bore: 30 mm Rip capacity: 1100 mm Motor: 7.5 kW Speeds: 2800 / 4000 / 5500 rpm Djdpfx Acoyymtdo Dour Hydraulic blade tilting: 0° - 46° Hydraulic cutting height adjustment Lowerable rip fence Pneumatic saw shaft lock Crosscut table with fixed angle setting Telescopic cutting length stop up to 3300 mm Sliding table with stepless locking Integrated contact for dust extraction activation Central lubrication point Transport dimensions: approx. 3300 x 2000 x 1800 mm (L x W x H) Weight: approx. 1500 kg To avoid misunderstandings, inspection on site by appointment is possible and recommended. Sale as is Technical data, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, no guarantee. Subject to prior sale. No warranty is given on used machines; sale as inspected applies. Payment terms: Prices plus statutory VAT. Payment prior to collection or dispatch. Delivery terms: ex stock.

Būklė: naudotas, Gamybos metai: 2003, Naudota mašina Pagaminimo metai 2003 Įranga ir techniniai duomenys: Pjovimo sritis: Pjovimo ilgis: 4300 mm Pjovimo aukštis: 2100 mm Pjovimo gylis: maks. 60 mm Nusiurbimas: Pjūklo agregatas: 120 mm Rėmo galas: 100 mm Darbinio ruošinio atrama: Stabili plastikinė atrama optimaliam stabilumui, taip pat siauriems ruošiniams Drožlės pašalinamos per įžambiai einančias angas Ritinėlinė transportavimo sistema: Rankinė, lengvam ir medžiagą tausojančiam transportavimui Fiksavimas: Duedpfoyxx U Djx Ac Dsr Rankinis, vertikalus ir horizontalus Padavimas: Rankinis, vertikalus ir horizontalus Diskinis pjūklas: HM, 250 mm, karpytas-stogelinis dantis, Z48 Pjūklo variklis: 4 kW prie 5450 aps./min., 400 V, 50 Hz Trumpinimo liniuotė: su ruošinio atrama siauriems ruošiniams (4 laukai) Nusiurbimo įrenginys pagal BG TRK nurodymus (žemiau 2 mg smulkių dulkių / m³ oro) Matmenys: apie 5.100 x 1.100 x 2.600 mm Svoris: apie 1100 kg Prieinamumas: greitas Vieta: 63934 Röllbach

Būklė: naudotas, Gamybos metai: 2006, Naudota mašina Pagaminimo metai: 2006 Įranga ir techniniai duomenys: Pjovimo ilgis: 3600 mm Pjovimo aukštis: 1644 mm Pjovimo gylis: 60 mm Pjūklo disko skersmuo: 250 mm Variklis: 3 kW Su viduriniu ruošinio laikikliu visuose laukuose Su siaurų detalių įtaisu Dujdoyxyabepfx Ac Dsr Su rankiniu ilgio ribotuvu Matmenys apie: 4620 x 1500 x 2460 mm Vieta: Röllbach Prieinamumas: trumpu laikotarpiu

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2000, PERTICI ML 139 drenažo frezavimo staklės, naudota, veikianti. Dedjynwavopfx Ac Dour

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1992, ROTOX 336 drenažo frezavimo staklės, naudota, veikianti mašina. Duodjynwacopfx Ac Dsr

Būklė: labai geros būklės (naudotas), Good day! I would like to offer you the following machine: 1 used Altendorf F 45 panel saw - Hydraulic height and tilt adjustment - Digital display (speed and tilt) - 4.5 m cutting length - Automatic star-delta start - 105 mm cutting height with 350 mm saw blade and scoring unit - 155 mm cutting height with 450 mm saw blade without scoring unit - 3000/4000/5000/6000 rpm - Automatic motor brake - Rip fence with fine adjustment - Parallelogram safety guard - Table extension and table width extension - Undercarriage - Extraction ports top and bottom - End trim shoe - Adjustable handle on sliding table - Operating tools - Operating manual/spare parts list New components: - Narrow extraction hood 90° (181.00 + 19 % VAT) - Wide extraction hood 45° (268.80 + 19 % VAT) - Poly Flex V-belt 11W875 (35.50 + 19 % VAT) - Flat belt for scorer (32.50 + 19 % VAT) - Gas spring 50N for scorer (45.30 + 19 % VAT) - GUHDO saw blade 350 mm (78.50 + 19 % VAT) - New bearings installed in saw shaft (250.00 + 19 % VAT) - New bearings installed in scorer (150.00 + 19 % VAT) Djdpoyy S Uyofx Ac Deur Special equipment: - 7.5 kW 380 Volt motor Original price: €1,350 + 19% VAT - Scoring unit Original price: €3,150 + 19% VAT - 4.3 m sliding table Original price: €4,250 + 19% VAT - Pneumatic pressure bar 3.2 m Original price: €3,800 + 19% VAT - Rip fence with fine adjustment 1.3 m Original price: €580 + 19% VAT - Duplex double-sided mitre fence Original price: €1,350 + 19% VAT - LASER cutting line indicator Original price: €2,300 + 19% VAT - Circular saw feed Panhans type 76 Original price: €4,665 + 19% VAT Price: €13,800 + 19% VAT The machine has been technically inspected, cleaned, adjusted and freshly painted. Cables and plugs are included, ready for immediate use. Only cash payment or bank transfer prior to collection/shipping. The machine is sold without any warranty or guarantee. Please send me a short message. Thank you!

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2009, Spindulio veikimo laikas: 17 540 val. Djdpeyyyiljfx Ac Djur Lazerių veikimo laikas: 45 508 val.

Būklė: naudotas, Gamybos metai: 2009, Techninė informacija: Spindulio veikimo valandos: nežinomos Lazerio galia: 4000 W Dusdpfx Asyuvcisc Dsr Resonatorius TLF4000 buvo sumontuotas Trumpf True Laser 2525 aparate: Lazerio galia: 4 000 W (4 kW) Bangos ilgis: 10,6 µm Spindulio režimas: TEM01* Dažnio diapazonas (gating): 100 Hz – 10 kHz Dujų sunaudojimas (lazeriui): CO2: apie 1 l/h N2: apie 6 l/h He: apie 13 l/h Pjovimo dujos O2: apie 500 – 2000 l/h Elektros suvartojimas: apie 33 – 67 kW Lazerio galia reguliuojama: programuojama 1% žingsniais Lazerių tipas: CO2 lazeris su uždara dujų cirkuliacija