Perforatorius pirkti naudotą (181)

Sąlyga: naudotas, Pressure: 30.0 t Punching cross-section in sq mm: 30.0 at 9.0 mm Stroke rate: approx. 35 strokes/min Throat depth: 610 mm Stroke—infinitely adjustable: 0–28.0 mm Oil capacity: 35.0 l Working height: 1010 mm Total power requirement: 4.0 kW Machine weight: approx. 1,200 kg Dimensions (L x W x H): 1,400 x 700 x 1,600 mm Podpexaaipefx Af Njgg Good condition (!!) Includes numerous tooling (punches/dies) Equipment/features: - Electro-hydraulic punching machine with large throat depth - Material/sheet stripper incl. stripper plates - Large material support table with adjustable depth stops - Infinitely variable stroke adjustment - Freely movable footswitch incl. safety cover - Forklift pockets for easy transport - Side storage area - Extensive accessories and tooling, incl. tool cabinet - Die base (for special size dies) - Punch holders (for special size punches) - Original operating manual

Sąlyga: naudotas, Pressure: 100 t Punching cross-section in sq mm: Ø 31 in 25 mm Stroke: 10 - 50 mm Throat depth: 510 mm Working height: 1100 mm Strokes per minute: 14 - 45 spm Max. punching diameter: Ø 90.0 mm Oil capacity: 103 l Total power requirement: 7.5 kW Machine weight approx.: 2400 kg Dimensions (L x W x H): 1750 x 1020 x 2050 mm Well-maintained condition (!!) Original price without accessories approx.: 25,000 Euro Special price on request Equipment features: - Heavy-duty, robust electro-hydraulic punching machine with large throat depth - Punching station with material/sheet stripper - Infinitely adjustable stroke: 10-50 mm - Freely movable foot switch incl. protective cover Pgodpfx Afjxabrfe Njg - Hydraulic low-pressure finder for foot pedal operation - Crane lifting eye for easy transport - Side storage surface - Integrated hydraulic power unit - Three-phase motor, 400 Volt, 50 Hz - Original operating manual

Sąlyga: naudotas, Gamybos metai: 1991, Pressure 70.0 t Punching cross-section in sqmm: 27 in 20 mm Punching cross-section in sqmm: 32 in 14 mm Working height 1060 mm Throat depth 500 mm Machine weight approx. 1500 kg Total power requirement 7.0 kW Dimensions (LxWxH) 1550 x 1200 x 1950 mm Good / well-maintained condition (!!) Original price approx. 21,000 Euro Special price on request Psdpfjxabu Tox Af Nsgg Equipment: - Electro-hydraulic punch press with large throat depth - Large GEKA stop table with movable stop system - Sheet stripper with stripping plates - Infinitely variable stroke adjustment - Die base - 1x free-moving foot switch - Operating manual (PDF)

Sąlyga: geras (naudotas), Įskaitant apie 140 štampų Techniniai duomenys: Spaudimo jėga: 500 kN Eigos ilgis: 32 mm Eigos ilgis nuolat reguliuojamas: 10–32 mm Pedpfx Ajyapl Ijf Negg Eigos dažnis prie 10 mm eigos: 35 min⁻¹ Pakabos gylis: 510 mm Darbo aukštis iki matricos: 1070 mm Montavimo aukštis: 350 mm Štampavimo stalo plotis: 255 mm Skylių pramušimo galimybės su standartine štampavimo įranga ir štampavimo stalu: Ø 31 mm į 12 mm medžiagą Su universaliu štampavimo laikikliu: U-profilis, flange srityje: 100–300 mm, dvigubas T-profilis, flange srityje: 80–300 mm, U-profilis, sijos srityje: 100–300 mm, dvigubas T-profilis, sijos srityje: 80–300 mm Skylių pramušimo galimybės su specialia štampavimo įranga SV 58 / 65: Ø 58 mm į 7 mm medžiagą / Ø 65 mm į 6 mm SV 90: Ø 90 mm į 4 mm SV 130: Ø 130 mm į 3 mm Mašinos duomenys: Nominali galia: 4 kW Alyvos kiekis: 45 l Grynasis svoris (su alyva): apie 1 320 kg Mašinos matmenys (I × P × A): 108 × 65 × 168 cm

Gamybos metai: 2025, Sąlyga: naujas, Dimensions (LxWxH): 0x0x0 mm Weight: 100 kg Total power requirement: 0 kW Sprossen Punch NSF-6-20 Manual Foot-Operated Sprossen Punch Morsø NF is a foot-operated sprossen punch designed for cutting muntin bars for window frames, cabinet doors, kitchen cabinets, etc. The Morsø NF guarantees a mirror-smooth and precise cut, allowing the workpieces to be assembled without further finishing. The horizontal movement of the knife head is incrementally adjustable. Stops on the left and right with adjustable end stops ensure precise work. The optimized lever ratio of the foot pedal allows for very easy operation. Double springs return the knives to the starting position. When comparing the Morsø NF with a milling machine, the following points should be considered: - No dust - No noise - No compressor required - The Morsø NF guarantees a smoother and consistently more precise cut - The Morsø NF produces no dust, so no extraction system is required - The Morsø NF requires less than 15 minutes to change knives - Setup and adjustment of stops Pgodpfx Asvz Hynsf Neg - As the knives wear, the 45° angle remains unchanged, ensuring consistently accurate joints - The Morsø NF cuts plastic, all types of wood, and MDF - Neck widths (Morsø NSF): 6–20 mm - Neck widths (Morsø NLF): 12–26 mm - Maximum working width: 70 mm - Maximum working height: 160 mm - Stops on left and right: 1,500 mm - Extension tables left and right: 1,000 mm - Net weight: 100 kg Scope of delivery: - Safety shield - Waste chute - 6 end stops - Stops on the left and right sides of the machine - 1 neck knife (size of your choice) - 1 pair of side knives

Gamybos metai: 2025, Sąlyga: naujas, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 100 kg Total power requirement: 0 kW Sprossen Punch NLF-12-26 The manually foot-operated Morsö NF Sprossen Punch is designed for cutting window mullions, cabinet doors, kitchen cabinets, etc. The Morsö NF guarantees a perfectly smooth and precise cut, allowing workpieces to be assembled without further finishing. The horizontal movement of the cutter head is adjustable in increments. Stops on the left and right, equipped with adjustable end stops, ensure exact operation. The favorable leverage of the foot pedal allows for very easy operation. Double springs return the blades to their initial position. When comparing the Morsö NF to a milling machine, consider the following points: – dust-free – noiseless – no need for a compressor - the Morsö NF ensures a smoother and more consistently precise cut - the Morsö NF produces no dust and therefore requires no extraction system - the Morsö NF requires less than 15 minutes for blade changes - setup and adjustment of stops - even as the blades wear, the 45° angle remains unchanged, ensuring consistently accurate joints - the Morsö NF cuts plastic, all types of wood, and MDF - Neck widths (Morsö NSF): 6 - 20 mm - Neck widths (Morsö NLF): 12 - 26 mm - Working width, max.: 70 mm - Working height, max.: 160 mm - Stops left and right: 1,500 mm - Extension tables left and right: 1,000 mm - Net weight: 100 kg Scope of delivery: - Safety guard - Waste chute - 6 end stops - Stops on the left and right of the machine - 1 neck blade (size of your choice) Psdpfxevz Hyho Af Negg - 1 pair of side blades

Gamybos metai: 2025, Sąlyga: naujas, Dimensions (LxWxH): 0 x 0 x 0 mm Weight: 90 kg Total power requirement: 0 kW Mitre Notching Machine MODEL H (pneumatic) Morsö H Semi-automatic Pneumatic Mitre Notching Machine – Dust-free – Noise-free Designed for picture frame and furniture mouldings with rebate, the Morsö H cuts double mitres at 45° and single mitres up to 90°. Ideal for workshop use, the machine is also suitable for cutting tenons, notches, lap joints, and similar joinery. The Morsö H utilizes knives in a draw-cut motion (not rotary), ensuring precision without creating dust. Offcuts are discharged away from the machine via a chute. Operation is via foot pedal and only requires a compressor. Morsö H guarantees a perfectly smooth and precise cut, allowing moulding sections to be joined directly without further finishing. Horizontal movement of the knife head is adjustable in increments. Vertical movement is infinitely adjustable with a clamping mechanism. Pgsdpfxjvz Hvvo Af Nsg The Morsö H works on the same simple principle as the manual MORSØ-F, but is pneumatically powered. Supplied with two-hand operation for safety. The pneumatic cylinder replaces the foot pedal and draws the knives smoothly through the moulding in one step. Morsö H standard version includes: safety shield, two-hand operation, waste chute, adjustable longitudinal stop, measuring scale up to 1500 mm, adjustable stops (45°-90°), and adjustable rebate supports. - Double mitres at 45° - Single mitres up to 90° - Maximum working width: 100 mm - Maximum working height: 165 mm - Cross section: 65 x 65 mm - Measuring scale up to 1,500 mm - Air pressure: 6 – 8 bar - Air consumption per stroke: 9 liters - Minimum air hose diameter: 10 mm - Net weight: 90 kg

Gamybos metai: 2025, Sąlyga: naujas, Dimensions (L/W/H): 0 x 0 x 0 mm Weight: 90 kg Total power requirement: 0 kW Mitre and Mullion Punch MODEL FC For picture frame mouldings and furniture mouldings with rebate. Morsø FC cuts double mitres at 45° and single mitres up to 90°. In artisan use, the machine is also ideal for cutting tenons, notches, covered mitres, etc. The Morsø FC operates with knives in a drawing cut (not rotary). It works without producing dust. Offcuts are discharged away from the machine via a chute. Morsø FC is operated by a foot pedal and does not require a compressor or electricity, meaning it can be used virtually anywhere. Morsø FC guarantees a mirror-smooth and precise cut, so the mouldings can be assembled without further processing. The horizontal movement of the knife head can be set incrementally. Pgsdpfx Aovz Hvpof Nsg The vertical movement can be infinitely clamped. The favourable lever transmission of the foot pedal allows for very easy operation. Double springs return the knives to their starting position. The movable longitudinal stop with measuring scale ensures precise adjustment for inside, outside, and rebate sizes. Morsø F Standard, equipped with: safety shield, waste chute, moveable longitudinal stop, 1500 mm measuring scale, adjustable stops (45°-90°), and adjustable rebate supports. Thanks to a special lever mechanism, only minimal pressure is required. The knives are manufactured from the finest, hardened steel of the highest quality. Option: Automatic rebate support. - With foot operation - Moveable longitudinal stop - Measuring scale - Stops left and right of the knife head, adjustable 45°-90° - Adjustable supports for rebate profiles - With combination knife head (mitre and mullion) - 1 set of mullion knives (10–18 mm neck width) - Locking screw with clamping lever and stop ruler - Double mitre at 45° - Single mitres up to 90° - Max. working width: 100 mm - Max. working height: 160 mm - Max. cross section: 65/65 mm - Measuring scale up to 1,500 mm - Net weight: 90 kg

Gamybos metai: 2025, Sąlyga: naujas, Matmenys (ilgis/plotis/aukštis): 0x0x0 mm Svoris: 35 kg Bendras galios poreikis: 0 kW Kampų štampavimo staklės, MODELIS BA (su matavimo skalėle) Rankinė kampų štampavimo staklė Morsø BA yra kompaktiškas, ant stalo statomas modelis, puikiai tinkantis siaurų su laiptais profilių apdirbimui. Peilių galvutė gali būti nustatyta į dvi pozicijas, kad būtų pasiektas lygus ir švarus pjūvis. Matavimo skalė užtikrina tikslų ilgį. - be dulkių - be triukšmo - nereikia kompresoriaus - švarus pjūvis - Dvigubas kampinis pjūvis 45° - Viengubas kampinis pjūvis iki 90° - Maks. darbinis plotis: 70 mm - Maks. darbinis aukštis: 115 mm Pjdpjvz Hvcofx Af Njgg - Matavimo skalė iki 650 mm - Grynoji masė: 35 kg

Gamybos metai: 2025, Sąlyga: naujas, Dimensions (LxWxH): 0x0x0 mm Weight: 90 kg Total power requirement: 0 kW Mitre Guillotine Saw, Model F Pgedpfxovz Hvij Af Nog For picture frame mouldings and furniture mouldings with rebate. The Morsø F cuts double mitres at 45° and single mitres up to 90°. In craftsmanship, the machine is also highly suitable for cutting tenons, notches, overlapping mitres, etc. The Morsø F operates with draw-cut knives (not rotating blades). It works without producing dust. Offcuts are directed away from the machine via a chute. The Morsø F is operated by a foot pedal and requires neither a compressor nor electricity, meaning you can use the Morsø F virtually anywhere. The Morsø F guarantees a perfectly smooth and precise cut, allowing the moulding elements to be joined without any further processing. The horizontal movement of the knife head is adjustable in steps. The vertical movement can be adjusted steplessly via a clamp. The favorable lever ratio of the foot pedal allows for very easy operation. Twin return springs bring the knives back to their starting position. The adjustable longitudinal stop with measuring scale ensures precise settings for inner, outer, and rebate dimensions. Morsø F Standard version supplied with: safety guard, offcut chute, adjustable longitudinal stop, 1500 mm measuring scale, adjustable stops (45°–90°), and adjustable rebate supports. Option: Automatic rebate supports. - Double mitre cuts at 45° - Single mitre cuts up to 90° - Maximum working width: 100 mm - Maximum working height: 160 mm - Maximum cross section: 65 x 65 mm - Measuring scale up to 1,500 mm - Net weight: 90 kg

Gamybos metai: 2025, Sąlyga: naujas, Matmenys (ilgis/plotis/aukštis) 0x0x0 mm Svoris 35 kg Bendras galios poreikis 0 kW Kampų kirpimo presas MODELIS B (be matavimo skalės) Rankiniu būdu valdoma Morsø B kampų kirpimo presas yra mažas, patogus stalo modelis, kuris puikiai tinka stiklo juostelėms ir pan. Juostelės iki tinkamo pločio gali būti nukerpamos vienu pjūviu. – be dulkių – be triukšmo – nereikia kompresoriaus – švarus pjūvis Pgedpfxjvz Hu Se Af Neg - Dvigubas 45° kampo pjūvis - Viengubas pjūvis iki 90° - Maksimalus darbinis plotis: 70 mm - Maksimalus darbinis aukštis: 115 mm - Grynasis svoris: 35 kg

Sąlyga: naudotas, Gamybos metai: 2001, Condition: used Year of manufacture: 2001 Stock number: 9647 Delivery time: prompt, subject to prior sale Country of origin: Italy Price: €24,400 In stock: 1 unit Punching force: 30 tons Working area: 1250+N x 1000 mm X-axis travel (+repositioning): 1250 mm Y-axis travel: 1000 mm X-axis speed: 40 m/min Y-axis speed: 30 m/min Combined X+Y speed: 50 m/min Stroke: 30 mm Max. strokes (1 mm step, 1 mm sheet thickness): 730 cycles/min Max. strokes (25 mm step, 1 mm sheet thickness): 300 cycles/min Table height: 980 mm Motor power: 4 kW Oil tank: 115 l Length: 4000 mm Width: 2780 mm Height: 1900 mm Transport dimensions: 4000 x 2300 x 1900 mm + Z mm Weight: 4800 kg With 6-station Multitool holder MTE6 (max. dia. 24 mm) 2 clamping claws Brush table, table size 1970 x 2260 mm Foot pedal 2 pcs additional single die holders PC with Euromac software Eurowin 8.36 Max. punching force: 300 kN Automatic repositioning up to 10,000 mm Pgsdpfewirkgsx Af Nsg Max. punching diameter with single tool: 88.9 mm Max. punching diameter with MTE6 Multitool holder: dia. 24 mm Max. opening of clamping claws: 7 mm Transport width: 2350 mm Operating manual in English and Italian CE Declaration available WITH LARGE TOOL PACKAGE Several pieces each of the following dimensions: Round: dia. 2.5/2.8/3/3.12/3.2/3.5/3.9/4.1/4/4.5/5/5.2/5.5/6/7/7.5/8/8.5/9/9 .5/10/10.5/11/11.5/12/12.5/13/13.5/14/15/16/18/19/20/21/23 mm Square: 10/12/13/15 mm Rectangular: 5x2/20x2/22x4 mm Oblong: 10x6.5/12x8.5/12.2x10.7/18x5 mm

Sąlyga: geras (naudotas), Punch, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, multi-hole punch, punching machine, punching press - Box section punch: 50 x 30 mm - 2x quick-change tool holders (for round and rectangular tubes) - with tools for round tube punch and rectangular tube punch - coordinate stop - throat depth: 155 mm - quick-change punching system Pedpfxob A I Hde Af Nogg - side and depth stops - max. punching force: 36 t - weight: approx. 2000 kg

Gamybos metai: 1995, Sąlyga: geras (naudotas), multifunctional punch press, punch press, hole-punch, pneumatic hole punch Pgjdpfx Asb A Nc Hef Neg - Operation: pneumatic - Year of manufacture: 1995

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 10 h, mašinos/transporto priemonės numeris: 103414, Didelio našumo automatinė žiedinių segtuvų gamybos linija. Lakštų padavėjas (Saug-Anleger), lankstymo stotis, išpjovos skylės štampavimo įrenginys (Griffloch-Ösmaschine), dvigubo kniedijimo stotis, operatoriaus valdymo skydelis (Fanuc QuickPanel View), mechaninis padavimo įrenginys, viengubo kniedijimo stotis, lankstymo stotis. Viršelio aukštis: 120 – 400 mm. Viršelio plotis: 300 – 820 mm. Medžiagos storis: min. 1 mm – maks. 3,5 mm. Kniedžių atstumas: 90 – 300 mm. Pgjdpox Apb Hsfx Af Njg

Sąlyga: geras (naudotas), Gamybos metai: 1992, mašinos/transporto priemonės numeris: 576892, Pasiūlymas 25455 Hidraulinės plokščio profilio ir strypinės plieninės žirklės su išpjovimo įtaisu ir skylamuše Pgodpfx Afex S Ib Ho Nsg Techniniai duomenys: - Plokščiaprofilių žirklės pjauna iki 300 x 15 mm - Profilinio plieno žirklės - pjauna kampuočius 90° iki 120 x 12 mm - Strypinių žirklių funkcija - pjauna apvalų plieną iki 40 mm - kvadratinį plieną iki 35 mm - Išpjovimo įtaisas – su kvadratiniu išpjovimo įrenginiu 100 x 42 x 10 mm - Skylamušė – spaudimo jėga 600 KN - su atraminiu stalu - išėma atstumą 220 mm - išmuša skylę pliene iki 28 mm Ø storio 15 mm - arba 38 mm Ø storio 11 mm - įvairūs skylamušiai ir matricos, - Variklis 400 V / 4 kW - Užimama vieta apie P 600 x A 1550 x G 1500 mm - Svoris apie 1300 kg

Sąlyga: geras (naudotas), Gamybos metai: 2005, mašinos/transporto priemonės numeris: 4222559205002, Pasiūlymas 25437 Techniniai duomenys: Pgjdpfx Asx S Ehwjf Nog - Presavimo jėga: 500 KN - Eigos ilgis, reguliuojamas be pakopų: 10 - 32 mm - Eigos dažnis: 22 - 27 1/min - Išsikišimas: 510 mm - Montavimo aukštis: 350 mm - Pavara: 400 V / 4 kW - Skylių išmušimas, pvz. iki 27 mm Ø plienei: 14 mm - Su specialiu štampavimo laikikliu, pvz. iki 39 mm Ø plienei: 9,5 mm - Pvz. iki 90 mm Ø plienei: 4 mm - Reikalinga vieta apytiksliai: P 700 x A 1700 x G 1200 mm - Svoris apytiksliai: 1150 kg - Komplekte: - Hidraulinė žemo slėgio taškavimo nustatymo įranga - Ilgas štampo laikiklis perkirtimui profiliuotame pliene - Ritininių takų sistema su PEHU 101 spaustuvo padavimo valdymu - Ritininių takų ilgis: apie 6000 mm - Kojinis jungiklis - Avarinio stabdymo mygtukas

Sąlyga: geras (naudotas), Gamybos metai: 2009, veikimo valandos: 44 287 h, Funkcionalumas: visiškai funkcionalus, X working area max.: 2500 mm Y working area max.: 1250 mm Operating hours: 44,287 h Control system: Bosch PNC-P Standard equipment: Machine - Robust, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear magazine with 18 tool stations incl. 2 clamping claws - Drives with maintenance-free three-phase motors - Repositioning device with programmable holddown - Ball tables - Parts chute 180 x 150 mm - Automatic shutdown Punching Head - Hydraulic punching head - Rotatable mono-tool holder - Programmable holddown - Tool length compensation - Spray lubrication for punches - Slug extraction - Forming Control - Open control system based on Bosch PNC-P - Operator panel with 15" TFT color display - Program management - Integrated technology data - Teleservice Data Transfer - USB interface and network connection Safety - CE marking - Multi-beam light barriers - Rapid hydraulic shutdown + Multitool function Pgjdpfxowlifme Af Nsg + MultiShear function + MultiBend function + Thread forming function + Marking/High-speed beading function + Deburring and rolling technology function + Softpunch function + Moveable support table + Sensor for parts chute + Vibration-damped installation + 2nd locating pin + Bulging detection

Gamybos metai: 1998, Sąlyga: geras (naudotas), Multi-function punch, punch press, hole punch, pneumatic hole punch - pneumatically operated - Year of manufacture: 1998 Pedjb A Hwajpfx Af Nogg

Sąlyga: geras (naudotas), Multifunction punch, punch press, hole punch, pneumatic punch -pneumatically operated Podpfxjn Sru Hs Af Nsgg

Sąlyga: geras (naudotas), Punching machine, hydraulic punch, hydraulic press, hydraulic press -Insert tool -Width: 290 -Length: 550 -Height: 260 Pgsdpfob A H Tasx Af Njg -with hydraulic power unit -control system -foot switch -Dimensions: 800/700/H1300 mm -Weight: 400 kg

Sąlyga: geras (naudotas), Die set holder, notching tool, punching tool, punch, punching die, punch stamp, -Manufacturer: Mubea, punching tool Ø 75 mm Pgsdpfx Afsiqhgqo Nsg -Type: Mubea 75 5-9, shank Ø 50 mm -Die: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm -Weight: 6.6 kg

Sąlyga: geras (naudotas), Matrix holder, notching tool, punching tool, punch press, punching die, punch stamp, Psdjiqhguepfx Af Njgg -Manufacturer: Mubea, punching tool Ø 60 mm -Type: Mubea 60 5-12, shank Ø 50 mm -Die: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm -Weight: 6.7 kg

Sąlyga: geras (naudotas), Punching units, punching unit, punching frame, punching tool, non-driven notching and shearing units, forming frame, for notching machine, sheet metal notcher, notching shear, corner notching machine, corner shears, corner notcher -Manufacturer: Raskin, punching unit type 125 NIA 111.163.0 -Punching capacity: 3 mm -Dimensions: see photos -Measurements: 270/200/H150 mm -Weight: 30.5 kg Psderw Dadopfx Af Njgg

Sąlyga: geras (naudotas), Sprossen and Mitre Punch, Sprossen Punch -Manufacturer: Rammefabriken, mechanical corner notcher -Spacing: 100 mm -Adjustment depth: 65 mm -Dimensions: 1700/600/H1080 mm -Weight: 118 kg Psdpfx Aoif Huref Nogg