Pbt 25 pirkti naudotą (44 279)

Sąlyga: naudotas, Gamybos metai: 1980, Pressure 200 t Bending length 3000 mm Frame gap 2560 mm Installation height 450 mm Throat depth 450 mm Stroke adjustment 240 mm Horn length beyond outer frame each 175 mm Table length 3050 mm Table width 280 mm Table height above floor 820 mm Electrical configuration - Voltage/Frequency 220/50 V/Hz Njdjt Hllpspfx Abmodc Control system CYBELEC, DNC60 Stroke 250 mm Operating pressure 150 bar Machine weight approx. 15 t Space requirement approx. L: 4.0 x W: 3.2 x H: 3.44 m Hydraulic press brake, new control system in 2005 - CYBELEC DNC 60, lower beam extends 500 mm into the floor, machine constructed with I-beam frame, prism and upper beam with 3000 mm length,

Sąlyga: paruoštas naudoti (naudotas), Baldor BSM1R-0,2-40-B5 servo motor, 16724A, SN: BEDBDA2606 + Gysin GPL 52-2S / 25:1 planetary gearbox, used, normal signs of wear, 100% fully functional, scope of delivery as per photos. Nodpji D E Aqsfx Abmedc

Sąlyga: naudotas, rida: 26 000 km, galia: 206 kW (280,08 AG), pirmoji registracija: 09/2001, bendras svoris: 25 000 kg, kuro tipas: dyzelinas, spalva: oranžinė, ašių konfigūracija: 6x2, didžiausias leistinas svoris: 12 000 kg, tuščias svoris: 13 000 kg, padangos dydis: 315/60R22,5, ratų bazė: 4 200 mm, stabdžiai: retarderis, vairuotojo kabina: dieninė kabina, pavaros tipas: automatinis, emisijos klasė: euro2, pakaba: oras, sėdimų vietų skaičius: 2, Įranga: ABS, centrinis užraktas, diferencialo užraktas, kabina, kranas, papildomi žibintai, priešrūkiniai žibintai, sėdynės šildytuvas, vairo stiprintuvas, žemas triukšmo lygis,

Sąlyga: geras (naudotas), 2 lift systems, Megamat, heights 9.96 m and 8.96 m, 200 kg per tray, 61 or 69 trays – used –: Price per unit ex location: €17,950 (net), dismantled, packed and loaded, plus transport and reassembly! Price per unit when purchasing both units: €16,950 (net), dismantled, packed and loaded, plus transport and reassembly! Unit 1: Manufacturer: Megamat / Kardex Type: MEGALIFT-13236/25/9960 Year of manufacture: 2000 Unit height: 9.96 m The unit can be shortened in height! The base unit is approx. 6 m high and can be set up at this height without significant additional effort. Other heights possible! Unit width: to be advised Unit depth: to be advised Tray dimensions: External approx. 225 x 65 cm – Internal approx. 225 x 51.5 cm Number of trays: 69 pieces Max. load per tray: 205 kg Permissible total load: 18,000 kg The unit is equipped with the standard configuration of support angles – spacing approx. 250 mm. This means the minimum gap between trays is 250 mm, but it is possible to store taller products. Additional support angles can be purchased at extra cost to accommodate more trays (which would also need to be purchased). Unit number: 050772 Unit control / CPU (type): MM255 Keyboard / display (type): MM255 Control SW 25003_02_03D Total operating hours: approx. 2,058 (as of inspection 20.03.2024) Total retrieval cycles: 234,700 (as of inspection 20.03.2024) Date of last service and safety check: 06/03/2023 Date of last DGUV-V3 (protective conductor test / electrical inspection): 06/03/2023 Unit 2: Manufacturer: Megamat / Kardex Type: MEGALIFT-13236/25/8960 Year of manufacture: 2000 Unit height: 8.96 m The unit can be shortened in height! The base unit is approx. 6 m high and can be set up at this height without significant additional effort. Other heights possible! Unit width: to be advised Unit depth: to be advised Tray dimensions: external approx. 225 x 65 cm – internal approx. 225 x 51.5 cm Number of trays: 61 pieces Max. load per tray: 205 kg Permissible total load: 18,000 kg The unit is equipped with the standard configuration of support angles – spacing approx. 250 mm. This means the minimum gap between trays is 250 mm, but it is possible to store taller products. Additional support angles can be purchased at extra cost to accommodate more trays (which would also need to be purchased). Unit number: 050672 Unit control / CPU (type): MM255 Keyboard / display (type): MM255 Control SW 04003_02_03D Total operating hours: 1,354 (as of inspection March 2024) Total retrieval cycles: 170,500 (as of inspection March 2024) Date of last service and safety check: 06/03/2023 Date of last DGUV-V3 (protective conductor test / electrical inspection): 06/03/2023 Ndjdpfjvx Havex Abmjc Condition: good, dent in the panel of the control unit Availability: immediately Location: Landshut

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, darbinio aukščio: 520 mm, įėjimo įtampa: 400 V, bendras svoris: 4 500 kg, keliamoji galia: 150 kg, įvesties srovės tipas: Oro kondicionierius, galia: 12 kW (16,32 AG), Lisec Sealing Robot VFL-1DS/25, year of manufacture 2001, working direction left/right, consisting of the following components: - RTVN-15/25VFE, sealing entry, with glass and frame measurement and barcode reader for sealing of special shapes, year of manufacture 2001 - VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), step elements (bottom 0-50 mm, front, rear and top 0-140 mm) as well as special shapes according to Lisec special shape catalogue, with Beckhoff PC and LENZE drives - DOS-1PUD + SID, material dosing for material 1 PU (base 2 x 200 litres, liquid hardener 200 litres) and material 2 SI (base 200 litres, hardener 20 litres), year of manufacture 2001, will be fully overhauled prior to delivery Nsdpfjwuri Tjx Abmodc The machine is still in operation and can be inspected in production by prior arrangement. It is sold as described above, EXW from our customer’s facility in Germany. No further guarantee or warranty is given. Availability: February 2026

Sąlyga: naudotas, Gamybos metai: 2023,

Sąlyga: labai geros būklės (naudotas), Hugo Beck SL 412/25 Shrink Tunnel Hugo Beck Shrink Tunnel SL 412/25 Ndjdpfx Asp H T Iuebmec 380 V 6/9 kW power Air recirculation blower Cooling blower 2 x adjustable heating elements 1 x base heater 1 x additional heater with chain conveyor Dimensions Tunnel length: 120 cm Machine: LxWxH = 166x64x26 cm Further items – new and used – can be found in our shop! International shipping costs on request!

Sąlyga: geras (naudotas), Independent machine - Universal machine (First & Second in a machine line) Ndedpfx Absdh Tfksmjc Control system Power Control 22, software WoodCommander (Windows) Safe and soundproof enclosure No. 2+2 vertical columns for supporting the working units Min. useful working width (mm): 155 Max. useful working width (mm): 2500 Min. useful working thickness (mm): 12 Max. useful working thickness (mm): 60 Max. workpiece length before cams (mm): 1200 Retractable positioning cams, spacing (mm): 500 Feed rate (min/max), infinitely variable (m/min): 10 - 30 No. 4 working units (for each side of the machine): 1 safety cutter (pre-milling) 1 x kW 4.5 2 hogging units (KD 11) 2 x kW 6.6 1 milling unit (0°-25°) 2 x kW 0.4

Sąlyga: naudotas, rida: 1 001 km, spalva: raudona, vairuotojo kabina: kitas, pavaros tipas: kitas, Gamybos metai: 2002, pirmoji registracija: 01/2002, Įranga: centrinis užraktas, kabelinė gervė, kranas,

Sąlyga: geras (naudotas), TC 25 Baujahr: 2018 _____ Produktbeschreibung: Die Parkland TC25 Series R ist eine halbautomatische Maschine, die sich ideal für Anwender eignet, die höchste Qualität und präzise Ergebnisse mit minimalem Bedienaufwand wünschen. Diese Einsteigermaschine bietet schnelle und einfache Einstellungen für unterschiedliche Kerndurchmesser und Wandstärken und ist somit optimal für mittlere Produktionsmengen geeignet. Maschinenspezifikationen und Ausstattung: – Hülsenlängen von 200 mm (8″) bis 2.000 mm (80″) – Kerninnendurchmesser von 25,4 mm (1″) bis 152,4 mm (6″) – Wandstärke bis zu 20 mm (3/4″) bei Kartonhülsen – Schneller und unkomplizierter Kerndurchmesserwechsel – Exakte Schnittlängen mit einer Indexiergenauigkeit von ± 0,2 mm – CE-Kennzeichnung gemäß aktueller Gesundheits- und Sicherheitsvorschriften – Farbiger HMI-Touchscreen – Rockwell Automation: Weltweites Support-Netzwerk – Automatische Mutterkernvermessung – Mechanisches Drehmoment-Spannfutter zur Kernaufnahme – Fernzugriff über Ethernet-Anschluss – Optional: Mehrfachschnittlängen aus demselben Mutterkern – Stromversorgung: 380/440 V, 50/60 Hz, 3-phasig, mit Neutralleiter und Schutzleiter – Anschlussleistung: 16 A / Phase Nedpfov Iqhpjx Abmedc – Druckluft: 5,5 bar (80 psi) – Luftverbrauch: 1 cfm (1,7 m³/h) _____ Im Lieferumfang enthaltenes Zubehör:  Bedienungsanleitungen  Schlüssel  usw. _____ Technischer und optischer Zustand: • Technisch: 9/10 (geprüft und in einwandfreiem Betriebszustand) • Optisch: 9/10 (gereinigt und sofort einsatzbereit für den Endanwender) _____

Sąlyga: naudotas, Gamybos metai: 2007, veikimo valandos: 3 800 h, kuro tipas: dyzelinas, spalva: kitas,

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, Double-end tenoner Homag 4+4 motors Max opening 2500 mm Long infeed fence Ndedpfx Aercbccsbmjc

Sąlyga: geras (naudotas), Gamybos metai: 1990, Starrbettfräsmaschine CORREA A25/25 Verfahrweg X: 2.500 mm Verfahrweg Y: 1.200 mm Verfahrweg Z: 1.000 mm CNC-Steuerung: HEIDENHAIN TNC 355 Spindelaufnahme: SA 50 Spindelmotor: 30 PS Spindeldrehzahl: 2 bis 3.000 U/min Tischgröße: 3.000 x 1.000 mm Baujahr: 1990 Maximale Tischbelastung: 7 t Manueller Schwenkkopf Spannung: 380 V Abmessungen (L x B x H): 5.000 x 3.000 x 3.000 mm Gewicht: 16,5 t Nedpfxjvy T Euj Abmodc

Sąlyga: labai geros būklės (naudotas), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 240 / 2500 Control: PC 22 Feed speed (adjustable) m/min: 10 - 40 Cam spacing (mm): 500 EDGE PROCESSING (per side): Ndjdpfx Aolikydsbmsc Pre-milling cutter 1 x 4.5 kW (hydraulic) Milling unit KD 11 (2 x 8.1 kW) hydraulic EDGE BANDING SECTION (per side): Gluing section (hot melt + premelter) A3 + A34 Edge magazine for rolls (slot no. 6) Edge pressure zone "C" Pre-milling unit 2 x 0.55 kW Milling unit MF 20 (2 x 0.55 kW) 20° Profile scraping unit PN 20 Finishing unit (flat scraper + buffing unit) FA 11 Free space

Sąlyga: naudotas, rida: 26 000 km, galia: 206 kW (280,08 AG), pirmoji registracija: 09/2001, bendras svoris: 18 000 kg, kuro tipas: dyzelinas, spalva: oranžinė, ašių konfigūracija: 6x2, didžiausias leistinas svoris: 9 000 kg, tuščias svoris: 9 000 kg, padangos dydis: 315/60R22,5, kita apžiūra (TÜV): 03/2023, ratų bazė: 4 200 mm, stabdžiai: retarderis, vairuotojo kabina: dieninė kabina, pavaros tipas: automatinis, emisijos klasė: euro2, pakaba: oras, sėdimų vietų skaičius: 2, Įranga: ABS, diferencialo užraktas, kabina, papildomi žibintai, priešrūkiniai žibintai, sėdynės šildytuvas, vairo stiprintuvas, žemas triukšmo lygis,

Sąlyga: geras (naudotas), Press Brake Brand AMADA Model HFT 80/25 Capacity 2500 x 80T Ndjdpfxswivddj Abmoc Distance between uprights 1800 mm Dimensions 3500 x 1500 x 2100 mm Weight 6,500 kg Equipped with new and used tooling

Sąlyga: labai geros būklės (naudotas), ROTARY TRANSFER UNIT LONGITUDINAL - CROSS Equipment designed to be positioned between two double-end tenoners (or two double-sided formatting and edge banding machines) in an in-line (straight) configuration or in front of an independent double-end tenoner (or formatting and edge banding machine). Used for rotating workpieces by 90°, applicable for transfer from longitudinal to transversal processing. Features integrated control cabinet and operator panel. Overall length: 6200 mm 1st Roller Conveyor Table (longitudinal) with motorized rollers: approx. 1300 x 3200 mm Motorized rotary transfer unit with double cone (1 top + 1 bottom) 2nd Roller Conveyor Table (cross) with motorized rollers: approx. 2500 x 3000 mm Maximum panel dimensions: min. 195 x 250 mm / max. 1200 x 2500 mm Panel thickness range: 12 - 40 mm Total connected load: 3 kW Nsdpfx Absd Siydsmodc

Sąlyga: naudotas, rida: 17 500 km, galia: 159 kW (216,18 AG), pirmoji registracija: 12/1987, bendras svoris: 12 000 kg, kuro tipas: dyzelinas, spalva: raudona, ašių konfigūracija: 4x2, didžiausias leistinas svoris: 4 400 kg, tuščias svoris: 7 600 kg, padangos dydis: 10R22.5, ratų bazė: 3 600 mm, vairuotojo kabina: kitas, pavaros tipas: mechaninis, emisijos klasė: nėra, pakaba: plienas, sėdimų vietų skaičius: 9, Įranga: ABS, diferencialo užraktas, kabina, priekabos jungtis, priešrūkiniai žibintai,

Sąlyga: labai geros būklės (naudotas), Double-sided single machine (or 1st and/or 2nd machine in a machining line) Edge thickness in coils (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control system: POWERCONTROL PC23 Power Touch / Software: WoodCommander Feed speed (adjustable) m/min: 15 – 40 Safety and noise protection cabin. Retractable reference pins, spacing (mm): 1000 Side adjustment of aggregate carriage manual mm 30 – 80: for manual adjustment of the workpiece overhang for gluing and post-processing area FORMAT PROCESSING (per side): Pre-milling cutter (1 x kW 4.5) Chipping unit KD 11 (2 x kW 6.6) + free slot EDGE BANDING SECTION (per side): Gluing unit (hot melt glue + premelter) A3 + QA65 Edge magazine for coils (slot No. 2). Edge pressure zone (CNC controlled) – type A End trimming unit PK30 (2 x kW 0.8) feed speed 30 m/min Pre-milling unit BF20 (2 x kW 0.55) Multi-function unit (radius milling and contour milling unit) FF30 + FF32 (4 x kW 0.4) FlexTrim Free slot Scraper unit PN20 Finishing unit (flat scraper + smoothing unit) FA21. Spraying unit (for polishing fluid) No. 3 universal milling units for grooving/rabbetting and profiling SF20 (3 x kW 6.6) (CNC controlled) Nsdpsv Rpdnofx Abmodc

Sąlyga: naudotas, rida: 24 833 km, galia: 124 kW (168,59 AG), pirmoji registracija: 12/1972, bendras svoris: 11 000 kg, kuro tipas: dyzelinas, spalva: raudona, ašių konfigūracija: 4x2, didžiausias leistinas svoris: 5 215 kg, tuščias svoris: 5 785 kg, padangos dydis: 8.25-20, ratų bazė: 3 600 mm, vairuotojo kabina: kitas, pavaros tipas: mechaninis, emisijos klasė: nėra, pakaba: plienas, sėdimų vietų skaičius: 9, Įranga: kabina, papildomi žibintai,

Sąlyga: labai geros būklės (naudotas), DOUBLE-SIDED EDGE BANDING MACHINE - Edge thickness (coil) min/max: 0.3 - 3 mm Ndjdewk Hp Tepfx Abmoc - Workpiece thickness (panel) min/max: 12 - 40 mm - Working width (min/max): 250 - 2500 mm - PC control system: PC22 - Top pressure system with driven rubber belts - Adjustable linear stop; feed speed: 10–32 m/min - Liquid glue unit - Jointing milling unit (vertical spindle moulder): 2 x 4 kW at 9,000 rpm - Quickmelt hot-melt adhesive unit A3 - Pressure zone C (manual adjustment) "A" - Roll holder for 2 rolls - End trimming unit: HL 84 (2 x 0.22 kW at 12,000 rpm) - Pre-milling unit (2 x 0.4 kW at 12,000 rpm) - Finishing unit (scraper + buffing unit): FA11 - Polishing unit

Sąlyga: labai geros būklės (naudotas), FORMAT and EDGE BANDING LINE for ONE-SIDED POSTFORMING PROCESSING (FOR DIRECT PROCEDURE) Consisting of the following machines: A) Double-sided portal loading unit “TREVISAN” with motorized roller conveyor B) HOMAG one-sided POSTFORMING MACHINE FOR DIRECT PROCESS Model Profi VFL79/3/P/A - Maximum laminate thickness: 0.35 mm (for L and U profiles) - Workpiece thickness (min/max): 16 / 30 mm (optionally 50 mm) - Minimum workpiece width: 150 mm - Feed speed: 10 – 32 m/min - Control system: PC 22 / software package woodCommander - 01° Standard milling unit 2.2 kW (for scribing from above) - 02° Hogging unit 15 kW (for pre-hogging from above) 0° - 15° - 03° Standard milling unit 6.6 kW (for rebate milling above), motor shaft for hydro-locking tool holder - 04° Standard milling unit 6.6 kW (for rebate milling below) 0° - 120° (with hydro-locking) - 05° Radius milling unit 0.7 kW (for profiling the edges) - 06° Milling unit for top layer on U-profiles, HSK25 1.85 kW - 07° Universal milling unit UF 11 4 kW (for grooving or rebating) - 08° Milling unit 2.2 kW (for chamfer and laminate strip milling above) - 09° Milling unit 2.2 kW (for underside groove milling) - 10° RIGHT: Standard milling unit 6.6 kW (for grooving or rebating), working width 160 - 1050 mm - 11° RIGHT: Milling unit above and below 2 x 1 kW, 0° - 25° - 12° Workpiece cleaning postforming, blower 0.55 kW - 13° Laminate overhang monitoring (for detecting laminate breakout) Nsdpfx Aonzhxqsbmjdc - 14° Compact gluing unit PU34 + QA34, slot nozzle glue application - 15° Base unit pressure zone L-profile VF Direct for workpiece thickness max. 50 mm - 16° Base unit pressure zone for U-profile VF Direct for special profile R = 2.5 mm - 17° Top rotary knife - 18° Top milling unit 1 x 0.55 kW, 0° - 30° - 19° Top buffing unit with oscillation 1 x 0.25 kW C) Double-sided portal stacking unit “TREVISAN” with motorized roller conveyor

Sąlyga: labai geros būklės (naudotas), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control: NC 21 / HOMATIC Feed speed (variable) m/min: 15 - 50 Safety and noise protection cabin Cam pitch (mm): 500 FORMATTING UNIT (for each side): Spray unit (for liquid anti-adhesive) Protection milling cutter (pre-milling) 1 x kW 4.5 Chipper KD 11 (2 x kW 6.6) LEFT SIDE: Universal milling unit (electropneumatically controlled) SF 20 (kW 6.6 x 1) 0°-90° RIGHT SIDE: Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + premelter) A3 + A34 Edge magazine for rolls (compartment No. 6). Edge pressure zone "A" (1 + 4 rollers) Nsdpfx Aehvi E Ijbmjdc End trimming unit HL 04 (2 x kW 0.18) Pre-milling unit OPTIMAT (2 x kW 0.55) Multifunctional unit (radius and contour milling unit) FK 11 - 2 x kW 0.4 Multi-profile scraper unit PN 20 Flat scraper unit (pneumatic) Buffing unit (2 x kW 0.25)

Sąlyga: labai geros būklės (naudotas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 225 / 2500 Control: PC 22 / Software WoodCommander Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin Retractable positioning stops, spacing (mm): 1000 FORMATTING UNIT (per side): Protection cutter (pre-milling) (1 x kW 4.5) Chip removal unit KD 11 (2 x kW 6.6) Jointing and trimming unit UF 20/S2 (2 x kW 4) EDGE BANDING SECTION (per side): Bonding unit "ZERO JOINT" SCHUGOMA Kantenking (Option: EVA/PU glue) Edge magazine for rolls (compartment no. 2) Edge pressure zone (CNC-controlled) Type A End trimming unit HL 84 CHAMFER/STRAIGHT (2 x kW 0.22) Feed speed 25 m/min Pre-milling unit BF10 (2 x kW 0.55) Multifunction unit (radius milling and contour milling unit) FK11 (2 x kW 0.4) Multi-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scraper + polishing unit) FA 11. Spray unit (for polishing liquid) Ndedpfx Aouhv R Djbmjc No. 2 universal milling units for grooving/rebating and profiling SF20 (2 x kW 6.6) Powered panel infeed roller conveyor with singling system "HOMAG" Model POWER TBL 100/20/25.

Sąlyga: labai geros būklės (naudotas), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 60 Working width (min/max) mm: 225 / 2500 Control system: PC 22 / Software WoodCommander Feed speed (adjustable) m/min: 15 - 40 Ndedpfxjwxwyfj Abmec Safety and noise protection cabin Cam pitch (mm): FORMAT PROCESSING (for each side): Sprayer unit (for liquid anti-adhesive) Pre-milling cutter (trimming) 1 x kW 4.5 Zerspanner KD 11 (2 x kW 6.6) – free space EDGE BANDING SECTION (for each side): Gluing unit (PUR glue + premelter) QA 34 (FeMa-Tech) Pressure zone (CNC-controlled) "A" Edge magazine for rolls (compartment No. 6) End trimming unit HL84 (2 x kW 0.22) 0°-30° Pre-milling unit (2 x kW 0.55) Contour trimming unit (for fine trimming) CNC-controlled FK 13 (2 x kW 0.4), revolver 8+8 Free space Multi-profile scraping unit (CNC-controlled) MN 21 Finishing unit (flat scraper + smoothing unit) FA 11 OPTION: Universal milling unit for grooving/rabbetting and profiling UF11 (1 x kW 4)