Pakelti Sunkvežimių 2500 Kg pirkti naudotą (85 077)

Sąlyga: naudotas, Gamybos metai: 2009, veikimo valandos: 20 536 h, spaudimo jėga: 80 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 400 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, tuščias svoris: 16 000 kg, Technical Data Press: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 20,536 hours (as of September 2024) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed opening dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput capacity at bulk density of: - 30 kg/m³: approx. 6.0 t/hour - 50 kg/m³: approx. 10.5 t/hour - 100 kg/m³: approx. 17.5 t/hour Bale weights at approx. 1.2 m bale length: up to 600 kg, depending on material PLC control: Siemens S7-300 Display panel: pulsotronic Press dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Press transport weight: 16 t Special equipment: - Wear-resistant floor made of HARDOX steel Fpedsu Thypspfx Acujn - Special press ram for compacting "difficult" materials and loose bulk goods of small particle size - Control cabinet air conditioning - Machine base height increase: 200 mm Note: The machine is currently located in our workshop and is being partially overhauled. We anticipate that the overhaul work will be completed by the end of October and the machine will then be tested and released for sale.

Sąlyga: naujas, Included in the scope of delivery: 01x Wire mesh shelf, new Material finish: Sendzimir galvanized Design: drop-on shelf gratings, both sides edged Total depth: 1,112 mm Clear support span: 1,000 mm Overall width: 890 mm Mesh size: 106 x 72.5 mm Wire thickness: 3.8 mm Number of support bars: 4 pcs. Unit weight: approx. 5.14 kg Technical data: Tested load capacity: 500 kg according to ANSI MH 26.2 For frame depth: 1,100 mm Assumed beam width: 50 mm For indoor use only Fodoilk Ngepfx Acuepn Possible applications: Compartment size / Modules required per compartment 1,100 x 1,800 mm / 2 pcs. 1,100 x 2,700 mm / 3 pcs. 1,100 x 3,600 mm / 4 pcs. Heat shield panels: Upon request, we can offer you heat shield panels (see photo material) for purchase; prices upon request. Fire protection requires special standards. Therefore, the wire mesh can be supplied with a welded-on heat shield panel. If you require a push-through guard for cardboard boxes, the heat shield panel can also be supplied with an edging. General information about the item: This item is available for collection only. If transport or shipping is required, this will incur additional costs which can be provided upon request depending on delivery location and scope.

Sąlyga: labai geros būklės (naudotas), Steady rest (28387) Fjdpfx Ajmkffdjcuspn SPH 360/250 mm Weight: 57 kg Dimensions: see drawing

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, spalva: sidabras, Gamybos metai: 2022, The autopsy table is mounted on a central support column and features height adjustment from 750 to 1000 mm. The entire table is made of stainless steel (material no. 1.4301 – ANSI 304). The worktop is fitted with a high, contoured edging and a seamlessly welded basin measuring 400 x 500 x 200 mm, with a pipe overflow and strainer insert installed at one end of the table. Additionally, the tabletop is equipped with a waterproof, sound-insulating membrane and has a negative tilt angle sloped towards the drain. All electrical connections are integrated into the base and are easily accessible via an inspection opening. The ST 10/150 autopsy table model includes the following features: • Knee-operated mixer tap for hot and cold water, mounted on the central column • 3-metre shower hose with manual spray nozzle • 2 waterproof electrical sockets • Electrical and water connections factory-installed • UP/DOWN button for height adjustment via integrated electromechanical drive Fedpfx Aew Rym Decuspn DIMENSIONS: 260x85cm Power supply: 230V Load capacity: 300kg. The table is brand new, factory-packed on a pallet (as shown in the photo), ready for installation, complete with all necessary accessories. The device is new and comes from a bailiff liquidation sale, which explains the attractive price. The official retail price of this model is about 20k EURO!!! Additional data available in the attached files below.

Sąlyga: naujas, Gamybos metai: 2024, mašinos/transporto priemonės numeris: BN120XT-HA-X,

Gamybos metai: 2014, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Aprašymas: Parduodama profesionali Format 4 Shaper Machine Profil 45Z staklė, pagaminta FELDER KG (Austrija). Šis įrenginys idealiai tinka baldų gamybai ir medienos apdirbimui, kai reikalingas aukštas tikslumas ir kokybė. Techninė informacija: Gamintojas: FELDER KG Modelis: Format 4 Shaper Machine Profil 45Z Kilmės šalis: Austrija Tvirtas, itin tikslus įrenginys, skirtas intensyviai gamybai Fpjdpfxsxfawke Acuon Patikima ir stabili konstrukcija ilgalaikiam našumui Būklė: Labai gera, paruošta darbui. Vieta: Mintia, Hunedoara apskritis (Rumunija)

Sąlyga: geras (naudotas), Gamybos metai: 2012, veikimo valandos: 12 078 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 88 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 800 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 750 kg, bendras svoris: 30 000 kg, alyvos bako talpa: 2 000 l, galia: 98 kW (133,24 AG), tūrio srautas: 643 m³/val, Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 R-FU Year of Manufacture: 2012 Total Operating Hours: 12,078 hours (as of September 2025) Pump Operating Hours: 6,616 hours (effective pump runtime) Number of Bales Produced: 65,792 bales (as of September 2025) Main Pressing Force: 880 kN Specific Pressing Force: 120 N/cm² Shear Edge Press-Out Force: 120 kN Feed Opening Dimensions: 970 x 1,800 mm Theoretical Idle Cycle Time: 8.3 seconds Theoretical Throughput Capacity: 643 m³/hour Bale Dimensions: 1,100 x 750 mm, length variable from 600 up to 2000 mm Drive Power: 2 x 45 kW, frequency-controlled Connected Load: 98 kW Total Power Consumption: 192 A Fuse Protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput Rates at Bulk Density: - 20 kg/m³: 12.86 t/hour - 50 kg/m³: 32.15 t/hour Bale Weights at approx. 1.2 m Bale Length: 650 up to 750 kg/bale, depending on material Hydraulic Oil Tank Volume: 2,000 L HVI 46 PLC Control: Siemens S7-300 Operating Panel: Siemens TP 700 Press Dimensions (assembled): 18,000 x 4,300 x 3,270 mm (L x W x H) Installation Dimensions with Conveyor System: 18,000 x 22,000 x 5,765 mm (L x W x H) Weight (approx.): 30 t (main press approx. 20 t, press channel with bale clamp approx. 10 t) Special Machine Equipment: Fpsdpfxexcngne Acuen • Access lock by key transfer system • Electro-hydraulic locking of the press carriage during the tying process to prevent the press ram from moving position with highly expansive materials Additional Ordered Special Equipment: • Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW drive system at identical performance output • Manual switching on/off for number of wire ties to save tying wire for non-expansive materials • Shear edge press-out with 121 kN pressing force • Sensor-based wire monitoring; machine stops on wire break or end of wire • Bale chute • Optical warning signal, mounted on control cabinet Condition of the Baler: The entire press system (baler and conveyor technology) is in good, ready-to-operate condition. Technical Data – Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of Manufacture: 2012 Drive Power: 7.5 kW Belt Speed: 0.05 – 0.4 m/sec Feed Belt Length: 6,000 mm Feed Belt Sidewall Height: 400 mm Incline Belt Length: 9,000 mm Incline Belt Sidewall Height: 800 mm Gooseneck Length: 1,500 mm Incline: 30° Nominal Width: 1,800 mm Usable Width: 1,700 mm Belt Quality: EP-500/4 Steel Carriers on Rubber Belt: 50 x 50 mm Hollow Pin Chain, Pitch 125 mm, Rollers 36 mm Drive Shaft Height above Floor: 4,284 mm Overall Conveyor Height: 5,765 mm Transport Dimensions Feed Belt: approx. 7,000 x 2,200 x 1,250 mm (L x W x H) Transport Dimensions Incline Belt: 13,000 x 2,500 x 2,900 mm (L x W x H) Pit Dimensions for Conveyor: 14,765 x 3,260 x 1,250 mm (L x W x H) Scope of Delivery: For sale: the feed conveyor, the baler with bale chute, and the wire draw stations (wire not included). Remarks: All documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is complete. Inspection is possible by appointment. We accept no liability for the technical information provided or for possible errors.

Sąlyga: naujas, Included in the scope of delivery: 01x Wire mesh shelf, new Material finish: Sendzimir galvanized Fpedoilk Nrspfx Acuon Design: drop-in shelf panels, edged on both sides Total depth: 1,112 mm Clear support width: 1,000 mm Total width: 890 mm Mesh size: 106 x 53 mm Wire thickness: 3.8 mm Number of bearer bars: 7 pcs. Unit weight: approx. 7.53 kg Technical data: Tested load capacity: 1,000 kg according to ANSI MH 26.2 For frame depth: 1,100 mm Assumed beam width: 50 mm Intended for indoor use only Possible applications: Compartment size / Modules required per compartment 1,100 x 1,800 mm / 2 pcs. 1,100 x 2,700 mm / 3 pcs. 1,100 x 3,600 mm / 4 pcs. Heat Shield Plates: Upon request, we can offer you heat shield plates (see images) for purchase; prices available on request. Fire protection places special requirements. Therefore, the wire mesh shelves can be equipped with a welded-on heat shield plate. If you require an anti-push-through guard for cartons, the heat shield plate can also be supplied with a bent edge. General information about the item: This item is only offered for collection. If transportation or shipping is additionally required, this will incur extra costs, which can be requested from us individually depending on the delivery location and scope.

Sąlyga: labai geros būklės (naudotas), Steady rest (28388) SPH 360 mm Weight 37 kg Dimensions: see drawing Fsdjmkfd Sopfx Acuspn

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Temperature block calibrator with accessories Fedowc T Uaepfx Acuspn Temperature sensors are subject to mechanical, thermal, and chemical stresses. Over time, this leads to drift. Only regular calibration of the sensors provides information about the difference between actual and measured temperature and makes the specific drift behavior visible. Dry block calibrators and micro calibration baths are used for checking and calibrating a wide variety of temperature measuring devices and temperature sensors. Checking mechanical, electro-mechanical, or electronic measuring devices can be done effortlessly. The compact and robust instruments from SIKA are easy to transport, simple to operate, and feature all the performance characteristics required for each testing application. The frequent change of deployment locations in the field or in production, as well as stationary use in measurement workshops or test and inspection laboratories, results in different requirements for a temperature calibrator. Therefore, the instruments must be lightweight and handy for easy and quick on-site use. SIKA offers various temperature calibrators covering a range from -55 °C to 1300 °C.

Gamybos metai: 2015, Sąlyga: naudotas, Nuotekų neutralizacija Talpa: 8 m3/h Valdymas / Kontrolė: Valdymo skydas su jutikliniu ekranu / WAGO Įranga: Neutralizacijos bakas (37 hl); Galutinis kontrolės bakas (4,5 hl); Šarminių medžiagų bakas; Rūgšties bakas; Siurbliai; Matavimo, jutiklių ir reguliavimo technologijos; Valdymo skydas Fedpfx Aoxbqr Djcuepn

Sąlyga: naujas, didžiausias leistinas svoris: 2 700 kg, Gamybos metai: 2025, Vlemmix mašinų transportavimo priekaba 2700 kg, 300x150x34 Nauja Leistinas bendras svoris 2700 kg Vidinis krovimo plotas: 300/150/34 cm Išoriniai matmenys: 482/210/167 cm Galimas leistinas bendras svoris: 2700 kg Naudingoji apkrova: 2090 kg Savaeigė masė: 610 kg Ašys: 2 x 1350 kg Fpjdpfx Acsw Aiwqjuen Padangos: 195/50R13C Žema pakrovimo platforma Ašys su Knott stabdžiais Rampos su dujų spyruokle, rampos aukštis 130 cm Rampos su perforuota grotelėmis Kaina 3 350,00 € be PVM Kitos priekabos su 3,5 t svoriu pagal užklausą Apžiūra galima bet kada, susitarus telefonu. Visa informacija pateikta be garantijos.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2014, veikimo valandos: 5 612 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 48 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 1 250 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 550 kg, bendras aukštis: 2 800 mm, bendras svoris: 12 000 kg, transporto aukštis: 2 800 mm, alyvos bako talpa: 300 l, galia: 30 kW (40,79 AG), tuščias svoris: 12 000 kg, tūrio srautas: 332 m³/val, Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG Model: VK 4812 Year of construction: 2014 Operating hours: 5,612 hours (as of August 2025) Main press force: 48 t Specific press force: 58.2 N/cm² Feed opening dimensions: 1,250 x 1,020 mm Theoretical cycle time: 11.2 s Theoretical throughput: 332 m³/h Bale dimensions: 1,100 x 750 x 600 to 1,200 mm Drive power: 30 kW Total connected load: 32 kW Rated current: 59 A Binding: 4-fold horizontal, fully automatic Throughput rates, depending on material: Bulk density 20 kg/m³: up to 6 t/h Bulk density 50 kg/m³: up to 13 t/h Bale weights: up to 550 kg, depending on material PLC control: Siemens SIMATIC S7-200 Operator panel: Siemens HMI touch panel Hydraulic tank capacity: 300 L Oil type: HVI 46 Machine installation dimensions with bale chute: 10,046 x 4,387 x 2,705 mm (L x W x H) Transport dimensions (baler only): 8,500 x 2,500 x 2,750 mm (L x W x H) Fedpevtpq Hofx Acuspn Machine weight (baler): approx. 12 t Scope of delivery: – HSM VK 4812 baler, without hydraulic oil, without conveyor technology – Two wire spool boxes for 8 x 40 kg wire spools, without wire – Bale chute – Machine documentation in German Remarks: The baler is equipped with an oil cooler and volt-free contacts for external control. Operation at the control cabinet is on the left in pressing direction, the needle unit is on the right side and can be folded backwards for transport. The baler has been partially overhauled and tested in our workshop, see photos. Documentation (operating instructions, CE declaration, electrical/hydraulic schematics) is available in German. Viewing is possible by appointment. We do not assume liability for the technical information or for any possible errors.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2020, mašinos/transporto priemonės numeris: 97-006000S, Parduodamas rašalinis spausdintuvas Jet3 serijos, gamintojas Paul Leibinger GmbH & Co. KG, pagamintas 2020 metais. Įrenginys yra naudotas ir šiuo metu nenaudojamas. Mašina atitinka naujausius saugos standartus. Įrenginys yra paruoštas darbui. KORPUSAS - pagamintas iš nerūdijančio plieno - Plotis: 486 mm, Gylis: 286 mm, Aukštis: 446 mm - Svoris: 20,5 kg SPAUZDINTUVO GALVUTĖ - Nerūdijančio plieno korpusas - Pilnas ilgis: 265 mm, Skersmuo: 43 mm - Svoris: 1,5 kg Fpsdpfoxb Uqdox Acuon Įrenginio apžiūra galima pagal susitarimą ir pageidavimą. Dėl išsamesnės informacijos prašome susisiekti. (Nuotraukos dar bus pridėtos)

Sąlyga: labai geros būklės (naudotas), Heavy-duty wooden pallets with 3 runners, accessible from all four sides Length: 1680 mm Width: 1250 mm Board thickness: 45 mm Fsdpjl Uvv Tsfx Acuopn Weight: 82.5 kg Multiple units available

Sąlyga: naudotas, Funkcionalumas: nepatikrintas, High-pressure water pump, e.g., for Fpedpfx Aswc Ubnocusn - laboratory applications or - air humidification (cooling of outdoor areas / terraces) Pressure: 100 bar Voltage: 230 V Speed: 1,400 rpm

Sąlyga: naudotas, Gamybos metai: 1979, Mašina (papildomai): Likutinės šarmos bakas Talpa: 400 hl Temperatūra: 20 °C Ilgis: 5,8 m Plotis: 3,5 m Aukštis: 3,85 m Padėtis: gulima Fpodoxbpr Nspfx Acuon Įranga: izoliuotas; perpumpavimo įrenginys

Sąlyga: naujas, TECHNICAL DATA: - Base area: 5,000 x 5,000 mm [other configurations available] - Grid: 5,000 x 5,000 mm - Finished floor level: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm chipboard, P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new The platforms are modularly extendable in the specified grid as standard. Other sizes and heights available upon request. Our team will be happy to advise you! Scope of delivery: - Columns - Primary and secondary beams - Bracing (cross ties) - Floor covering - Fastening hardware Fpsdpjxdvhpjfx Acujn PRICES: Variant I: Base area: 25 m² | Size: 5,000 x 5,000 mm | €2,711.50 net, plus transport costs and VAT Variant II: Base area: 50 m² | Size: 5,000 x 10,000 mm | €4,756.00 net, plus transport costs and VAT Variant III: Base area: 75 m² | Size: 5,000 x 15,000 mm | €6,659.80 net, plus transport costs and VAT Variant IV: Base area: 100 m² | Size: 5,000 x 20,000 mm | €8,662.00 net, plus transport costs and VAT Variant V: Base area: 100 m² | Size: 10,000 x 10,000 mm | €8,381.70 net, plus transport costs and VAT Variant VI: Base area: 150 m² | Size: 10,000 x 15,000 mm | €12,162.50 net, plus transport costs and VAT Variant VII: Base area: 200 m² | Size: 10,000 x 20,000 mm | €15,136.80 net, plus transport costs and VAT Variant VIII: Base area: 300 m² | Size: 20,000 x 15,000 mm | €22,782.72 net, plus transport costs and VAT Further variants available Optional accessories: - Handrail - Flush wall connection - Stairway - Transfer station - Collision guard YOUR CONTACT PERSONS WITH US: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & FABRICATION This platform system represents an example from our standard range. Naturally, we design and manufacture your storage mezzanine exactly to your operational requirements – tailored to area, load capacity, installation height and intended application. Our design department will issue you an individual, non-binding quotation based on your requirements. Whether new installations, expansion, or modernization of existing systems – we support you with sound technical expertise and practical solutions. TRANSPORT & ASSEMBLY We are happy to assist with transport and assembly. This item is available for collection. Delivery or shipping is possible for an additional charge. The exact costs depend on the delivery location and volume of the shipment, and can be requested individually from us. PAYMENT TERMS Payment terms are to be agreed in the event of an order. Prices are quoted per unit/net or as specified in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, deals in new and used products from the fields of warehouse logistics, materials handling technology, storage platforms, textile storage, as well as machinery for trade, industry, and crafts. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. Please contact us if you have any questions. ✅ Four Factors for Success – The Key Components of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 19 750 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 970 mm, pildymo angos ilgis: 1 800 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 750 kg, alyvos bako talpa: 2 000 l, tuščias svoris: 33 000 kg, tūrio srautas: 643 m³/val, Technical Data Press: Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 R-FU Year of Manufacture: 2015 Operating Hours: 19,750 hours (as of July 2025) Number of Bales Pressed: 24,760 bales (as of July 2025) Fodpfxsxb Dvvj Acuspn Main Ram Pressing Force: 1000 kN Specific Pressing Force: 120 N/cm² Pressing Force of Cutting Edge Ejector: 121 kN Feed Hopper Dimensions: 970 x 1,800 mm Theoretical Cycle Time (Idle Run): 8.3 seconds Theoretical Throughput: 643 m³/hour Bale Dimensions: 1,100 x 750 mm (Length variable from 600 up to 2000 mm) Drive Power: 2 x 45 kW, frequency controlled Connected Load: 110 kW Total Current Draw: 213 A Fuse Protection: 250 A slow blow Tying System: 5-fold horizontal, fully automatic Throughput at Bulk Density of 20 kg/m³: 12.86 t/hour Throughput at Bulk Density of 50 kg/m³: 32.15 t/hour Bale Weights at Length approx. 1.2 m: 650 up to 750 kg/bale, depending on material Hydraulic Oil Tank Capacity: 2,000 L HVI 46 PLC Control: Siemens S7-300 Operator Panel: Siemens TP 700 Press Dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation Dimensions with Conveyor System: 35,000 x 8,480 x 7,745 mm (L x W x H) Approx. Weight of Press: 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Special Machine Equipment: Access locking via key transfer system Electro-hydraulic locking of the press carriage during the tying process to prevent the ram from moving position when processing highly expansive materials Additionally Ordered Special Equipment: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard drive 2 x 45 kW, with the same performance output Manual enabling/disabling of the number of wire ties to save tying wire on non-expansive material Cutting edge ejector with 121 kN pressing force Sensor-based wire monitoring, with press shutdown in case of wire break or end Bale slide Visual warning signal mounted on the control cabinet Press Condition: The complete baling system (press and conveyor system) is in good, ready-to-use condition. The equipment is cleaned weekly by the operator, lubricated, and serviced according to manufacturer specifications. Technical Data of Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Model: Chain Belt Conveyor KF 1800 Year of Manufacture: 2015 Belt Speed: 0.36 m/second Feed Belt Length: 7,000 mm Incline Belt Length: 14,500 mm Swan Neck Length: 1,550 mm Incline: 30° Nominal Width: 1,800 mm Usable Width: 1,638 mm Overall Conveyor Height: 7,745 mm Pit Dimensions for Conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of Delivery: The sale includes the feed conveyor, the cross-distributor conveyor, and the baler with bale slide, but without wire feed stations and without wire. Remarks: Complete documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is available. Inspection by arrangement is possible. We accept no liability for the technical data or any potential errors.

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, keliamoji galia: 1 000 kg, stalo apkrova: 1 000 kg, 3 ašių sukimo ir apvertimo pozicionierius, 1000 kg keliamoji galia, tvirtinimo diskas 0,65 m skersmens. Aukščio reguliavimas: 1000–1500 mm. Skirtas suvirinimui, montavimui, apdirbimui ir kt. Dėl tvirtos ir stabilios konstrukcijos, lankstaus trijų ašių pozicionavimo (taip pat ir virš galvos) bei paprasto valdymo, įrenginys palengvina didelių ruošinių suvirinimą, montavimą ir valdymą. Optimali ruošinio padėtis pagerina suvirinimo kokybę ir leidžia pasiekti nurodytas apkrovas bet kurioje padėtyje. Dėl begalinio dviejų sukimosi ašių pasukamumo ir papildomo aukščio reguliavimo galimos visos ruošinio pozicijos (taip pat ir virš galvos). Sukimo stalo greitis reguliuojamas tolygiai nuo 0,1 iki 1,0 aps./min. Komplektuojama su belaide rankine nuotolinio valdymo pultu. Sukimo kampas: 360° be sustojimo. Pasukimo kampas: 360° be sustojimo. Kėlimo eiga: 1000–1500 mm. Svirties išleidimo spindulys: 1 metras. Fsdpfx Acsxbh Dqjujpn

Sąlyga: reikia remonto (naudotas), Table size: 2900 x 1200 mm Folded size (without legs): 420 mm Opened size (without legs): 1700 mm Fpedpfx Acjik Hbzousn without hydraulic power unit! Quantity: 1 pc Price per unit

Sąlyga: naudotas, Gamybos metai: 2015, Perdirbimo sistema, skirta plastiko ir gumos gaminių atskyrimui nuo tekstilinio armavimo, pvz., įvairių tipų guminių žarnų, PVC žarnų, tentų, banerių bei kitų plastiko medžiagų su tekstiline armuote. Sistema dirba kartu su granuliavimo grupe ir atskyrimo sistema. Valandinis našumas: 50 - 80 kg/h Įmetimo angos matmenys: 270 x 120 mm + fi 80 mm Peilių ilgis: 3x2 + 2x2 Rotoriaus skersmuo: 250 mm Fpsdpfxswpkw Ej Acusn Pjovimo ilgis: 600 mm Variklio galia: 22 kW Matmenys: 3200 x 3000 mm Aukštis: 2500 mm Svoris: 1000 kg Pagaminimo metai: 2015 Techninė būklė: naudota mašina, visi varikliai veikiantys. Nėra viršutinio dangčio, kurio matmenys: 400x300 mm, skirto produkto įkrovimui. Yra pilna ir originali techninė dokumentacija.

Sąlyga: naudotas, TECHNICAL DATA: - Load capacity: 500 kg/m² - Grid size: approx. 4,200 x 5,000 mm - Top edge of flooring: approx. 4,030 mm - Clear height: approx. 3,700 mm - Colour: blue - Condition: used Scope of delivery: - Columns - Main and secondary beams - Cross bracing - Floor decking PRICING: Price: from €45.00 net per m², ex stock Nordhorn. OPTIONAL ACCESSORIES: Fjdpfoumbp Rox Acuspn - Guardrail - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PARTNERS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. This item is available for collection. Delivery or shipping is possible at an additional charge. The extra costs depend on the delivery location and scope of shipment and can be requested from us individually. TERMS OF PAYMENT Payment terms are to be agreed upon in the event of an order. The price is quoted as a unit price/net price, or as otherwise specified in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, is a trading company for new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for commerce, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us. Connect Four – The four success modules from DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, keliamoji galia: 6 500 kg, Lifting capacity 6,500 kg Note: Arm diameter adjustable from 1,880 mm to 4,550 mm (extendable) Space-saving and continuously adjustable; the outriggers can be locked in place Fedpfswd Twqjx Acuepn Speed continuously variable from 0.001 to 5 rpm Motor power 3 kW Torque 15,000 Nm Height 800 mm Maximum current transmission 2,000 A Weight 4,700 kg Includes hand and dual foot remote control CE certificate of conformity, documentation, wiring diagram With original sales invoice from 2016 Current new price approx. €28,000

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, keliamoji galia: 3 000 kg, Įranga: kojinis nuotolinio valdymo pultas, Heinrichsglück suvirinimo sukamasis stalas, keliamoji galia 3000 kg. Greitis ir nuolydis reguliuojami be pakopų. Komplektuojamas su keliomis nuotolinio valdymo pulteliais. Sena technologija, bet patikima. Tvirtinimo disko skersmuo: 1,35 m. Aukštis horizontaliai: 1,4 m. Aukštis per vidurį: 1,15 m. Ilgis: 2,2 m. Plotis: 1,3 m. Fjdpfxew Ivh So Acuepn