Ozaki pirkti naudotą (210)

Sąlyga: labai geros būklės (naudotas), Epson G10-854SR Robot Assembly Station with Dispensing Unit The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area KK+SW, and 3.3 Front Assembly Area. (KK = heat sink, SW = firewall bracket) St.3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and circuit boards is transferred into the dispensing area via the conveyor belt. - The WT is stopped at the lift-and-position unit (HuPo), lifted off the belt, and fixed in place. - The x-y-z handling system positions the dispensing head at the designated spot and initiates the dispensing process. - After successful dispensing, the system moves to the park position and the WT is set back onto the belt. - The WT is then conveyed to the KK+SW assembly area (provided there is no WT in the placement position). St.3.2: Assembly Area KK+SW - A WT from the dispensing area enters the KK+SW assembly area via the conveyor belt. - It is stopped at the lift-and-position unit (HuPo), lifted and fixed from the belt, and the chassis side walls of the semi-assembled unit are aligned. - KK-tray and SW-tray positioning happens simultaneously. - A stack of KK trays (12) and a stack of SW trays (12) are manually placed on their respective feed conveyors outside the safety enclosure. - The safety shutters are opened and the loaded tray stacks move into the pick position of the respective tray handler. - The safety shutters are closed again. - The respective grippers pick up the appropriate tray. - Tray separation and upward transport is carried out via the Z-axis (above the actual removal height). - For centering and tray stabilization, a centering support is positioned under the tray by x-handling. - Using the stacker Z-axis, the tray is set onto the centering support. - The trays are now ready for component removal. - The multi-gripper on the SCARA robot picks up the KK from the tray and places it in an intermediate position for alignment (to compensate for inaccuracies during pickup, thus always providing the same gripping position for assembly). - The KK is scanned, picked up again, and if the scanner passes, installed on the WT. - If not okay (NOK), the KK is placed in a NOK box. - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position. - The SW is picked up again and installed on the WT. - The next step is the front assembly area. Technical Data Design: SCARA (4-axis robot) Payload: nominal 5 kg, max. 10 kg Horizontal Reach: 850 mm Vertical Reach: Axis 3: 420 mm Orientation Range: J4: +/- 360° Repeatability Horizontal: +/- 0.025 mm Repeatability Vertical: J3: +/- 0.01 mm Repeatability Orientation: J4: +/- 0.005° Max. Operating Range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Max. Operating Speed: J1,J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible Inertia: nominal 0.02 kg*m², max. 0.25 kg*m² User Cabling (Electrical): 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-Axis Outer Diameter: 25 mm Press-in Force: 250 N Weight: 48 kg Control: EPSON RC180 Mounting Type: Ceiling IP Protection Class: IP20 Power and Signal Cable: 3 m Bsdpfsibx S Nox Abfocu Additional assembly modules in various sizes – both new and used – are available in our shop! International shipping costs on request.

Sąlyga: paruoštas naudoti (naudotas), Dozavimo juostinis konvejeris Ammann Prekės ženklas: Ammann Bodpswkaw Refx Abfecu A-A ilgis = 1700 mm Juostos plotis: 650 mm Pavara: 1,5 kW reduktorius Sandėlyje: 6 vnt.

Sąlyga: naujas, Gamybos metai: 2023, mašinos/transporto priemonės numeris: U-231811/2, 1x VDL HT350 šliuzas be pavaros (su pavara už papildomą kainą). Bedpfxsvpg Axo Abfecu Yra nauji, niekada nenaudoti, dokumentacija ir flanšo tarpinė nauji. Šliuzai be pavaros. Dydis: DN350 Korpusas: Dažytas ketaus Rotorius: Nerūdijantis plienas su gumos mentėmis Guoliai: Išoriniai slydimo guoliai Esant 100% užpildymui – 10 litrų per apsisukimą.

Sąlyga: naudotas, Machine designation: Dosing System for Polymers Manufacturer: Alltech Model: Polymat 1000 V7 KD S Bcodpfxovt Sdpj Abfou Year of manufacture: 2003 Capacity: 1000 liters Conveying/Dosing of: Powdered materials Number of chambers: 2 Control system: Yes Drive motor: 1 x 0.55 kW, 12 x 0.55 kW Design: Horizontal Dimensions (L x W x H): 2000 x 900 x 1900 mm Unladen weight: 1000 kg Technical documentation: Yes Accessories: Dry material feeder type T09K0007 Condition: Used Price: On request

Gamybos metai: 1998, Sąlyga: naudotas, Mašinos pavadinimas: Polimerų dozavimo sistema Gamintojas: PRO-ENTEC Tipas: RM2 Gamybos metai: 1998 Tiekimas / dozavimas: Skystas polimeras Našumas: 2 - 30 l/val Valdymas: Taip Bcodpfx Aexa Atqobfju Matmenys: I 1.150 x P 600 x A 1.600 mm Svoris tuščias: 100 kg Techninė dokumentacija: Ne Būklė: Naudotas Kaina: Pagal užklausimą

Sąlyga: naudotas, Gamybos metai: 2017, MHS ICC 28S mit Kamerasystem für präzises Portionieren Die ICC 28 ist die Hochleistungs-Schneidemaschine von MHS. Der Hauptvorteil liegt im kontinuierlichen Produktionsfluss, der zusätzlich durch einen Greifer unterstützt wird. Dadurch ist eine exakte Portionierung der Produkte möglich. Durch kontinuierliche Beschickung ist eine Stundenleistung von bis zu 4 Tonnen erreichbar. Unter den Standardprodukten setzen die innovativen Durchlaufschneider von MHS neue Maßstäbe in Sachen Wirtschaftlichkeit und Produktivität. Bodpfx Abevtgmfofscu Die ICC 28 schneidet: Fleisch, Koteletts, Nacken, Schweinebauch, Rouladen, Braten, Wurstwaren, Aufschnitt, Käse. Weitere Informationen, Fotos und ein Video folgen in Kürze.

Sąlyga: naudotas, Leonhardt Dosiermaschine Bcsdpev Dbgbefx Abfsu Sehen Sie sich das Video für einen Gesamteindruck an.

Sąlyga: geras (naudotas), Stainless steel screw conveyor, dosing screw, distribution screw, filling screw for big bags Screw trough diameter: 170 mm Screw trough length: 1,900 mm Discharge opening: 170 mm See our other listings VMA Wekerom Bjdpfx Aowyf Efjbfjcu

Sąlyga: naudotas, Dosing screw conveyor / feed auger Material: Stainless steel Motor power: 1.5 kW, 85 rpm Inlet dimensions: 770x410 mm Bodpfxewyf Imo Abfscu Screw flight diameter: 220 mm VMA Wekerom See our other listings

Sąlyga: labai geros būklės (naudotas), Stainless steel feed device, dosing device, rotary feeder Feed device for hammer mill Completely stainless steel Bcedpfxswygbns Abfou Input dimensions: 615mm x 240mm x 430mm VMA Wekerom See our other listings

Gamybos metai: 2020, Sąlyga: geras (naudotas), Comav rotary valve, dosing valve, rotary feeder, drop-through valve Rotor diameter: 400 mm Dimensions: see photos Manufacturer: Comav Type: VSD 400 Year of manufacture: 2020 Completely stainless steel Venturi diameter: 100 mm Motor power: 0.75 kW Bodpfx Abjwyf Nwofocu See our other listings

Sąlyga: geras (naudotas), Stainless Steel Vibrating Conveyor Dosing Unit Equipped with feed hopper Entirely stainless steel construction Bedswyf Rnepfx Abfocu Comes with a step for refilling the hopper See our other listings

Sąlyga: naudotas, Stainless steel dosing screw / feeder screw Fully stainless steel Screw ribbon diameter: 150 mm Bedpfx Aow Abtdsbfjcu Hopper dimensions: 800 mm x 700 mm x 1100 mm See our other listings VMA Wekerom

Sąlyga: beveik kaip naujas (naudotas), Refurbished Stainless Steel Dosing Screw, Auger, Filling Machine, Screw Dosing System Coarse and fine dosing Screw ribbons quickly detachable for cleaning purposes Motor power 1.1kW and 0.75kW See our other listings VMA Bcedpfx Abswygbbsfeu

Sąlyga: geras (naudotas), Dosing installation for bag emptying machine with dosing screw Stainless steel discharge cabinet Stainless steel dosing screw with movable bottom and pneumatic end valve Filter unit for dust extraction during refilling VMA Wekerom Bcjdpfx Abswyf U Tsfeu See our other listings

Sąlyga: geras (naudotas), Stainless steel belt conveyor, checkweigher, weighing machine, filling machine, scale Full stainless steel construction Spare conveyor belt included Equipped with Siemens PLC control for weighing Weighing up to approximately 10 kg Bjdpfx Abowyga Refjcu See our other listings VMA

Sąlyga: geras (naudotas), Derichs stainless steel dosing machine, dosing unit, powder dosing machine, dosing machine Completely made of stainless steel, including weighing computer Bsdpfswygbhjx Abfscu Equipped with dosing belt and mixing belt See our other advertisements

Sąlyga: naudotas, Vibratory dosing screw / dosing machine Completely stainless steel Motor power 1.1 kW, 9.7 rpm Screw diameter 150 mm Bjdpfxjwyfxrj Abfscu Mobile/executable on wheels Connection DN100 See our other listings VMA Wekerom

Sąlyga: geras (naudotas), K-Tron dosing machine, dosing screw, weigh feeder, filling machine, dosing unit Type: T-35 Equipped with scale with control system and display (operational condition unknown) See our other listings Bsdpfx Aswyf Iajbfecu VMA Wekerom

Gamybos metai: 2020, Sąlyga: labai geros būklės (naudotas), buffer hopper with conveyor belt inside, equipped with a dosing auger at the front, length 9 meters, width 2 meters Bsdpfx Absilqfqofscu

Sąlyga: paruoštas naudoti (naudotas), Dozavimo juosta su pavaros varikliu Bcsdpfxjxcg R Eo Abfsu

Sąlyga: naujas, Gamybos metai: 2025, Bag in Box Dosing Machine EF 600-NG – suitable for filling fruit juices, wine, vinegar, oil, etc. * High-quality stainless steel housing * User-friendly display showing key information (current flow rate, remaining volume, etc.) * Preset quantities: 1.5, 3, 5, 10, 20 liters * Freely adjustable fill volumes * Integrated cleaning program * Extensive statistics * Minimal downtime thanks to dual holding mechanism Bcedjt U Iiyspfx Abfou * Compact design

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: e.a.100, Vienkartinių paketėlių pildymo ir sandarinimo mašina su patentuotu atidarymo mechanizmu. Svoris – 2874 kg. Įtampa – 380 V. Slėgis – 7 barai. Mašiną atjungė ir saugiai paruošė V-shapes specializuoti technikai. Bjdpfx Aexr Ai Aebfecu

Gamybos metai: 2018, Sąlyga: labai geros būklės (naudotas), Sanco Dosieranlage, Baujahr: 2018 Bestehend aus: - 2x isolierte 1200-Liter-Tanks mit Mannloch und Rührwerk - Zugehörige Arbeitsbühne - 2x PROMASS A Durchflussmesser mit Schaltschrank - LKH-5 Kreiselpumpe - Grundfos-Pumpe - Plattenwärmetauscher - Zugehörige Verrohrung Bcsdpfxewf Izaj Abfeu Die Anlage wurde zuvor für das Dosieren von Lecithin eingesetzt, ist jedoch auch für andere Produkte geeignet. Die Anlage wurde funktionsfähig demontiert und befindet sich derzeit in unserem Lager. Bei ernsthaftem Interesse an dieser Anlage unterstützen wir Sie gerne weiter.

Gamybos metai: 1991, veikimo valandos: 13 h, Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Corazza/IMA MD120 Portionenpacker. Maschine zum Dosieren und Verpacken von Mini-Portionen Butter und Bouillonwürfeln in rechteckigen Packungen. - Leistung: 5.400 St./h bis 7.200 St./h - Aktuelles Packmaß: 31x23x11 mm → Umrüstung auf andere Packungsgrößen möglich - Baujahr: 1991 - Werksüberholung durch IMA 2016, seither nur 13 Betriebsstunden gelaufen - Papierzufuhr und -positionierung über Lichtschranke gesteuert - Butterzufuhr mittels Edelstahltrichter mit korrosionsbeständiger Förderschnecke - Komplett eingehaust mit Lexan-Türen und -Fenstern (gemäß EG-Richtlinien) - Inklusive Dokumentation und EG-Konformitätserklärung - Eine vollautomatische Sammel- und Stapelvorrichtung für mehrlagige Konfiguration kann ergänzt werden - Diese Maschine entspricht im Wesentlichen der Benhil 8304 Bcedpjwfn Adefx Abfeu Zustand: wie neu Bitte kontaktieren Sie uns für weitere Informationen. Die Maschine kann nach Terminvereinbarung besichtigt werden.