Ng 200 pirkti naudotą (146 006)

Sąlyga: naudotas, Gamybos metai: 1980, Pressure 200 t Bending length 3000 mm Frame gap 2560 mm Installation height 450 mm Throat depth 450 mm Stroke adjustment 240 mm Horn length beyond outer frame each 175 mm Table length 3050 mm Table width 280 mm Table height above floor 820 mm Electrical configuration - Voltage/Frequency 220/50 V/Hz Control system CYBELEC, DNC60 Tjdpfx Ajt Hllpsbled Stroke 250 mm Operating pressure 150 bar Machine weight approx. 15 t Space requirement approx. L: 4.0 x W: 3.2 x H: 3.44 m Hydraulic press brake, new control system in 2005 - CYBELEC DNC 60, lower beam extends 500 mm into the floor, machine constructed with I-beam frame, prism and upper beam with 3000 mm length,

Sąlyga: geras (naudotas), Gamybos metai: 1977, Funkcionalumas: visiškai funkcionalus, gerklės gylis: 440 mm, hidraulinio cilindro reguliavimas: 110 mm, bendras aukštis: 18 200 mm, stalo plotis: 800 mm, stalo ilgis: 1 100 mm, bendras plotis: 24 000 mm, bendras ilgis: 37 200 mm, bendras svoris: 12 600 kg, spaudimo jėga: 200 t, atstumo lentelė iki stūmoklio: 400 mm, galia: 15 kW (20,39 AG), Plunger stroke: 40-180 mm Todpfstu Hvwjx Ablod incl. Helmerding feeder, 400 mm x 4 mm Strokes: 40 + 60 strokes/min Distance table/ram – adjustment top/stroke bottom: 400 mm Table opening: 450 mm diameter

Gamybos metai: 2024, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Technical Description: The system is designed for weighing standard trolleys. The standard trolley is pushed into the system. Lifting and weighing are initiated via a push button. Lifting is performed by a motor drive. In combination with the bending beam load cell and the weighing terminal, the weight can be read on the display and transmitted to the existing DMS or ERP system. If required, the recipe scale can be equipped with castors for mobile use. The system can be fitted with all common weighing terminals. • Stainless steel frame in hygienic design • 1 drive unit • Push button • Shafts, bearings • Height-adjustable feet (optionally mobile version) Todpjttv Dfefx Abled • CEE plug

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 350 mm, Y ašies eiga: 250 mm, Z ašies eigos atstumas: 300 mm, ruošinio svoris (maks.): 500 kg, bendras aukštis: 2 398 mm, bendras plotis: 1 690 mm, bendras ilgis: 1 900 mm, plunksnos brūkšnys: 300 mm, ruošinio ilgis (maks.): 790 mm, ruošinio plotis (maks.): 530 mm, ruošinio aukštis (maks.): 275 mm, bendras svoris: 2 800 kg, bakelio talpa: 410 l, GF Machining Solutions FORM 200 Year of manufacture: 2015 – Only 7,200 eroding hours! Sinker EDM machine in C-frame design Fixed table with lowering tank Tjdpfxewi Iuus Ablod Travel ranges (X/Y/Z): 350 x 250 x 300 mm Max. workpiece dimensions: 790 x 530 x 275 mm Max. workpiece weight: 500 kg Programmable bath height: 100–325 mm Including pneumatic chuck Erowa ITS 50 / 3R Systems / Hirschmann (choice of system) Max. electrode weight: 50 kg Max. inertia: 2000 kgcm² 4-position electrode changer AC FORM HMI operating interface Operation via 15" LCD color touchscreen Keyboard and handheld control unit also available Machine dimensions: 1900 x 1690 x 2398 mm Total weight: 2800 kg After receipt of order, the machine will be cleaned and serviced by us. An erosion test will then be carried out. We are happy to commission the machine at your site and offer operator training. Optional: - Transport - Chiller unit - Dielectric fluid - Clamping devices

Gamybos metai: 2004, Sąlyga: naudotas, z-axis travel 200 mm Maximum clamping diameter of cutter heads: 550 mm Max. permissible cutter head weight: 150 kg Mounting plate diameter for cutter heads: 360 mm Mounting taper nominal diameter for cutter heads: 500 mm Machine weight approx. 2.3 t Space requirement approx. 2 x 1.5 x 2.03 m Cutter Head Setting and Measuring Machine In the manufacturing process for spiral bevel gears, the quality of the gear cutting tools used plays a decisive role. Especially in dry milling, high gearing quality and long tool life can only be achieved with precisely adjusted cutter heads. Tedpovq Sd Rofx Ablsd The CS 200 cutter head setting and measuring device enables fast and simple adjustment of individual cutters, checks their position, and documents the measurement results. The measuring sequence on the CNC-controlled inspection device is semi-automated: the individual actions required for each step are shown on the display and guided by operator prompts. Positioning of the individual cutters in the cutter head, including the height of the cutter tips, is carried out largely automatically via a special procedure and simultaneously recorded via a run-out diagram. A follow-up measuring process checks the radial position of all internal and external cutting edges in the cutter head. If certain parameters do not meet the specified tolerances, they can be individually readjusted. Thanks to the combination of semi-automated adjustment sequence, operator-guided setup actions, and automated measuring process, cutter heads can be set conveniently, quickly, and with high precision. Operator-guided setting and inspection sequence: - Graphical representation of the cutter head design as well as measurement results with tolerance check - Operator instructions given in plain text (no coded references) - Easy allocation of measurement results to individual cutters - Documentation of setting and measurement results via printer - Setting and inspection sequence suitable for stick blade heads of types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Sąlyga: labai geros būklės (naudotas), Laminating line also for panels with 'J', 'U', 'L' profile and 45° angle. Min/max panel dimensions: 260–1300 mm (width) x 1850–4250 mm (length) Coating: Decorative paper > 40 g/m² – 120 g/m² or PP, PET, PVC PUR adhesive (with NORDSON pre-melter) Tsdpjwd Tcajfx Abled Comprising: 01) Feeder with double station 'ESSEDUE' (bridge loader) 02) Wide belt sander 'BUFTERING' Model SWT 955 03) Motorized roller transfer 'HOMAG' Model TVL 100 04) Brushing and cleaning machine 'WANDRES'. 05) Gluing section with 2 'NORDSON' pre-melters for PUR glue 06) 'HOMAG' Model KFK 200 machine featuring: - Double glue application unit - Coil unwinder - Calender (roller press) - Edge folding and pressing section for excess material - Panel edge area processing 07) 'HOMAG' Cross-cut saw 08) Stacking system with double station 'ESSEDUE' (bridge unloader)

Gamybos metai: 2012, Sąlyga: geras (naudotas), Robot Engel Viper 20 RC 200 X= 700mm Y= tandem 1500mm Z= 2840mm B + C servo axes Tedpfx Asgpwgasblsd Year of manufacture: 2012 Price: €9,400 Contact person: Mr. Rainer Eckerle

Sąlyga: naujas, *TECHNICAL SPECIFICATIONS: Heating capacity (hot circuit): 48 kW Heating capacity (cold circuit): 12 kW Cooling capacity (hot circuit): 42 kW Cooling capacity (cold circuit): 270 kW Medium: Water up to 200°C Maximum external volume: 10 l at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions (LxWxH): 1,395 x 753 x 1,180 mm Weight: approx. 580 kg *FEATURE HIGHLIGHTS: - PLC control system with touch screen - Heating via Incolloy stainless steel tubular heaters Todsg Ey Ufopfx Ablsd - Heating control via solid-state relays - IP54 switch cabinet with forced ventilation - Electrical wiring with terminal blocks - Volt-free input for cold/warm switching signal (front door) - Volt-free contact for collective alarm via 3-pole connector (front door) - Temperature control unit with heating and cooling circuits for connection to a valve station, enabling rapid switching between hot and cold circuits - Temperature-controlled supply of return water - Level monitoring with automatic level compensation - Dirt filters in cooling water inlet and circulation system return - Separate automatic filling with dirt strainer - Flow measurement via differential pressure principle in both circuits - Monitoring of heater surface temperature via temperature sensors - System pressure regulation, required compressed air supply: 6 to 8 bar - Pressure booster pump type DS 360 for make-up water supply - Corrosion-resistant components (stainless steel, brass) - Unit mounted on castors and ready for connection *OPTIONS: - EcoTemp system for intermittent operation - Connection for external temperature probe PT100 or type J/K - Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This unit complies with European Directives. Other directives and standards are only met if specified in the order confirmation. This technical specification describes the standard equipment; customer requests deviating from the standard are specified in offers or order confirmations.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2015,

Sąlyga: naujas, Gamybos metai: 2025, The unit can be loaded onto a truck with a forklift and is operational with just a few simple steps. A 16A power socket connection is required. Overall dimensions of the unit (LxWxH): 3.5 x 1.06 x 2.98 m (operational mode) The precondition for separation is differences in the material, such as: Tsdpofrugksfx Ablod - Different particle sizes - Differences in density - Differences in the surface characteristics of the particles - Differences in particle shape - Grain size: 0.1 mm – 30 mm (larger grain sizes possible with special design)

Sąlyga: naujas, Gamybos metai: 2025, *Visi mūsų gaminiai pagaminti kruopščiai ir yra padengti 1 metų garantija! *Montavimas ir operatoriaus apmokymai NEMOKAMAI FABO gamina ir montuoja stacionarias akmens rūšiavimo ir plovimo linijas pagal kliento poreikius. Mūsų stacionarių įrenginių našumas svyruoja nuo 100 iki 1000 tonų per valandą. Todsuhpk Rspfx Ablsd Plovimo ir rūšiavimo įrenginio našumas – 200–350 t/h: - Upės akmens padavimo bunkeris - 1300x4000 mm, 2 denių vibracinis sietas - 2000x6000 mm, 4 denių vibracinis sietas su plovimo sistema - 1500x4000 mm nusausinimo sietas su hidrociklonu - Konvejerių juostų sistema - Valdymo pultas ir automatikos sistema DĖL PAPILDOMOS INFORMACIJOS MALONIAI PRAŠOME SKAMBINTI!!!

Sąlyga: naujas, Gamybos metai: 2025, Various models available! 1. Briquette diameter: Ø 200 mm 2. Capacity: 12,000 kg/hour (steel) 3. Preliminary compression force: 50 tons 4. Main compression cylinder pressure: 800 tons 5. Maximum operating pressure: 300 bar 6. Cycle time: 10 - 12 seconds 7. Electric motor power: 6x37=222 kW (main motors) 8. Machine dimensions: 11,000 mm x 10,000 mm 9. Machine weight: 60,000 kg 10. Screw feeders automatically fill the compression chamber, and the integrated vibration hopper ensures chamber protection by preventing oversized material from entering. 11. Cylinder rods are induction-hardened and chrome-plated. 12. Hydraulic oil cooling system is implemented. 13. All hydraulic system pumps and valves are by PARKER or BOSCH-REXROTH. 14. The machine is fully automated with PLC control. 15. All electrical and electronic components are by SCHNEIDER or SIEMENS. 16. The machine is CE-certified. This marking certifies that a product complies with European directives concerning consumer safety, health, or environmental protection. Todogv I N Uopfx Ablod 17. The machine is covered under AYMAS Makina San. Ve Tic. Ltd. Şti. warranty against manufacturing defects for one (1) year or three thousand (3000) operating hours.

Gamybos metai: 2012, Sąlyga: geras (naudotas), Robot 40 RC 200 X = 700 mm Y = tandem 1600 mm Z = 3320 mm B + C Servo Year of manufacture: 2012 Price: €8,900 Tjdpfogkvtxsx Abljd Contact person: Mr. Rainer Eckerle

Sąlyga: geras (naudotas), Gamybos metai: 2002, Clamping knife head type (max.): 460 mm Todpfx Aow N S E Aeblod Knife head weight (max.): 150 kg Mounting plate diameter for knife heads (Ø): 360 mm Mounting taper for knife heads, nominal diameter Ø: 58.227 mm Travel distance - Z axis: 200 mm Chart recording magnification: ±10 - ±500 µm Machine weight approx.: 2.3 t Space requirement approx.: 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear cutting tools used is critical. Especially in dry cutting, achieving high gear quality and long tool life is only possible with precisely adjusted cutter heads. The Oerlikon Cutter Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual cutters, checks their position, and documents the measurement results. The measuring process on the CNC-controlled testing device is semi-automated: Each step in the procedure is displayed on the screen via operator guidance. The positioning of individual cutters in the cutter head and the height of the cutter tips are managed by a special process that is largely automatic and simultaneously documented in a runout diagram. A subsequent measuring run checks the radial position of the inner and outer cutting edges of all the knives in the cutter head. If individual test parameters on the knives do not meet the specified tolerances, they can be individually readjusted. Combining a semi-automated setting sequence, operator-guided setup actions, and automated measurement procedures, cutter heads can be adjusted conveniently, quickly, and with high precision. Operator-guided setting and testing sequence: - Graphical display of the cutter head configuration and measurement results with tolerance monitoring - Step-by-step operator instructions in plain text (without coded information) - Simple assignment of measurement results to individual cutters - Documentation of adjustment and measurement results via printer - Setting and testing sequence suitable for stick blade cutter heads of the types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Gamybos metai: 2013, Sąlyga: geras (naudotas), Robot Engel Viper 20 RC 200 X= 700mm Y= tandem 1500mm Z= 2840mm B + C servo axes Year of manufacture: 2013 Price: €7,500 Tsdpfx Abehqmpxelsd Contact person: Mr. Rainer Eckerle

Sąlyga: geras (naudotas), Gamybos metai: 2004, Clamping knife head type (max.): 460 mm Knife head weight (max.): 150 kg Mounting plate diameter for knife heads (Ø): 360 mm Mounting taper for knife heads, nominal diameter Ø: 58.227 mm Travel distance - Z axis: 200 mm Chart recording magnification: ±10 - ±500 µm Machine weight approx.: 2.3 t Space requirement approx.: 2 x 1.5 x 2.03 m Tjdpfxoul Efmo Ablsd In the manufacturing process for spiral bevel gears, the quality of the gear cutting tools used is critical. Especially in dry cutting, achieving high gear quality and long tool life is only possible with precisely adjusted cutter heads. The Oerlikon Cutter Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual cutters, checks their position, and documents the measurement results. The measuring process on the CNC-controlled testing device is semi-automated: Each step in the procedure is displayed on the screen via operator guidance. The positioning of individual cutters in the cutter head and the height of the cutter tips are managed by a special process that is largely automatic and simultaneously documented in a runout diagram. A subsequent measuring run checks the radial position of the inner and outer cutting edges of all the knives in the cutter head. If individual test parameters on the knives do not meet the specified tolerances, they can be individually readjusted. Combining a semi-automated setting sequence, operator-guided setup actions, and automated measurement procedures, cutter heads can be adjusted conveniently, quickly, and with high precision. Operator-guided setting and testing sequence: - Graphical display of the cutter head configuration and measurement results with tolerance monitoring - Step-by-step operator instructions in plain text (without coded information) - Simple assignment of measurement results to individual cutters - Documentation of adjustment and measurement results via printer - Setting and testing sequence suitable for stick blade cutter heads of the types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Sąlyga: naudotas, Gamybos metai: 2013, Contact ATS Norway for further information. Please quote the reference number upon inquiry: 19095 Specifications: - Model year: 2013 - Mileage: 6,192 km - Operating hours: 1,644 - 2m² sweeper-suction machine - 4-wheel steering - 2-brush system - High-pressure cleaner - 40 km/h max. speed - Ready for delivery Description: Single owner, solely operated on their own property/parking facility. Tedpfx Ajv U Sg Heblod When the vacuum container is not pressurized, some water leaks out. The protective skirting around the machine is rusted and needs replacing; rust water has also stained the plastic. The return lines for the emptying lever are stuck and need to be repaired or replaced. Some scratches/damage visible around the machine. Overall, the machine is in good condition. It was in regular use until June 2024. Maintenance performed in November 2023.

Sąlyga: naudotas, rida: 1 550 km, galia: 90 kW (122,37 AG), kuro tipas: elektrinis, pavaros tipas: automatinis, bendras svoris: 2 390 kg, pirmoji registracija: 10/2023, spalva: sidabras, pakaba: plienas, sėdimų vietų skaičius: 5, kuras: elektra, Įranga: ABS, borto kompiuteris, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, oro pagalvė, statymo jutikliai, stumdomos durys, sėdynės šildytuvas, trauki kontrolė, vairo stiprintuvas,

Sąlyga: naudotas, tuščias svoris: 9 430 kg, didžiausias leistinas svoris: 28 570 kg, bendras svoris: 38 000 kg, pirmoji registracija: 07/2016, krovimo vietos ilgis: 13 400 mm, krovinių skyriaus plotis: 2 470 mm, krovos erdvės aukštis: 2 700 mm, krovinio erdvės tūris: 89 m³, pakaba: oras, padangos dydis: 385/65R22,5, spalva: balta, pavaros tipas: kitas, priekinės padangos dydis: 385/65R22,5, galinės padangos dydis: 385/65R22,5, vairuotojo kabina: kitas, emisijos klasė: nėra, Įranga: ABS, aušinimo blokas,

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1993, CNG Trailer Gas Methane-Natural Gas 200 bar Manufacturer: SAMRO Year: 1993 Tare weight: 6,900 kg Tsdpfx Ast D Aptsblsd We also offer other tanks for LIN, LOX, LAR, LNG, and CO2, as well as for argon, oxygen, nitrogen, carbon dioxide, hydrogen, and methane. We will be happy to provide you with a quotation or further information about other pressure vessels. Please contact us by phone or email.

Sąlyga: geras (naudotas), Gamybos metai: 2016, veikimo valandos: 6 580 h, rida: 61 850 km, Įranga: oro kondicionavimas, Very well-maintained "Schmidt" Swingo 200+ sweeper from 1st owner! (V223) We are pleased to offer you this excellently equipped sweeper from the world-renowned brand "Schmidt", model Swingo 200+, previously owned by the City of Kropp. The sweeper was purchased in 08/2016 and is in consistently well-kept condition – it is almost free from rust and both visually and technically in good shape. The machine features a three-brush system, all-wheel steering, air conditioning, cameras for reverse driving and suction nozzle, and a nozzle watering system. Tyres have been renewed, and a service including oil change and new air conditioning coolant was carried out in 09/2024. The entire system is in both visual and technical good condition, with no significant damages, and every function works as intended. Normal signs of use such as scratches, paint chips, and abrasions are, of course, present but do not affect operability whatsoever – see pictures. The vehicle has a total mileage of only approx. 35,250 km and 4,630 operating hours. The sweeping distance is at 6,100 km or 3,780 sweeping hours. The engine has accumulated approx. 6,580 engine hours in total. Shipping will be arranged by insured forwarding agency within three working days after receipt of payment. Of course, you also have the option of collecting the device from us during regular business hours. The total system weight including accessories is 3,500 kg. Todpfx Aetz Dhxobled Sale is exclusively to business customers; you will naturally receive an invoice, but VAT cannot be shown separately as it is a public sector asset. Private buyers can purchase the device on a “customer’s order” basis; direct commercial sale to private individuals is expressly excluded! The item is sold under exclusion of any warranty or liability for material defects. This exclusion does not apply to claims for damages due to grossly negligent or intentional breaches of obligations by the seller, nor for any injury to life, body, or health. For questions regarding pricing or technical details, please contact us at the address provided.

Sąlyga: naudotas, Gamybos metai: 2003, - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-position tool turret VDI40 - Year of manufacture: 2003 Technical Data Capacity: - Centre height: 200 mm - Distance between centres: 1000 mm - Permissible Ø over bed: 400 mm - Permissible Ø over cross slide: 370 mm - Permissible Ø over compound rest: 210 mm - Bed width: 300 mm Headstock: - Main spindle bore: 65 mm - Main spindle nose: Camlock No. 6 / DIN 55027 No. 6 - Main spindle Morse taper: 5 - Spindle speed ranges: 2 - Constant cutting speed: 0–700 / 700–3000 rpm Feeds: - Working feed Z/X: 0–7000 mm/min - Rapid traverse Z/X: 10 m/min Tailstock: Tedpjuwrz Hofx Ablod - Tailstock quill diameter: 58 mm - Tailstock quill travel: 155 mm - Tailstock Morse taper: 4 Motors: - Main motor power: 7.5 kW - DC motor power Z-axis: 12 Nm - DC motor power X-axis: 4 Nm - Pump motor power: 0.57 kW Dimensions: - Machine weight: approx. 2200 kg - Dimensions (W x H x D): 2980 x 1730 x 1610 mm

Sąlyga: naudotas, tuščias svoris: 9 430 kg, didžiausias leistinas svoris: 28 570 kg, bendras svoris: 38 000 kg, pirmoji registracija: 07/2016, krovimo vietos ilgis: 13 400 mm, krovinių skyriaus plotis: 2 470 mm, krovos erdvės aukštis: 2 700 mm, krovinio erdvės tūris: 89 m³, pakaba: oras, padangos dydis: 385/65R22,5, spalva: balta, pavaros tipas: kitas, priekinės padangos dydis: 385/65R22,5, galinės padangos dydis: 385/65R22,5, vairuotojo kabina: kitas, emisijos klasė: nėra, Įranga: ABS, aušinimo blokas,

Sąlyga: naudotas, tuščias svoris: 9 210 kg, didžiausias leistinas svoris: 28 790 kg, bendras svoris: 38 000 kg, pirmoji registracija: 06/2016, krovimo vietos ilgis: 13 400 mm, krovinių skyriaus plotis: 2 470 mm, krovos erdvės aukštis: 2 600 mm, krovinio erdvės tūris: 86 m³, pakaba: oras, padangos dydis: 385/65R22,5, spalva: balta, pavaros tipas: kitas, priekinės padangos dydis: 385/65R22,5, galinės padangos dydis: 385/65R22,5, vairuotojo kabina: kitas, emisijos klasė: nėra, Įranga: ABS, aušinimo blokas,

Sąlyga: naudotas, tuščias svoris: 9 210 kg, didžiausias leistinas svoris: 28 790 kg, bendras svoris: 38 000 kg, pirmoji registracija: 06/2016, krovimo vietos ilgis: 13 400 mm, krovinių skyriaus plotis: 2 470 mm, krovos erdvės aukštis: 2 600 mm, krovinio erdvės tūris: 86 m³, pakaba: oras, padangos dydis: 385/65R22,5, spalva: balta, pavaros tipas: kitas, priekinės padangos dydis: 385/65R22,5, galinės padangos dydis: 385/65R22,5, vairuotojo kabina: kitas, emisijos klasė: nėra, Įranga: ABS, aušinimo blokas,