Naujas Diskinis Pjūklas Banga pirkti naudotą (10 060)

Būklė: naujas, Gamybos metai: 2026, Aluminum Circular Saw UK 600 HA 90°, Semi-Automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (also suitable for solid materials to a limited extent). The machine stands out due to its simple operation and quick, convenient material changeover. With this machine, only 90° cuts are possible! The saw feed is automatic via push-button, and material clamping is achieved with two pneumatically controlled vertical and two horizontal clamping cylinders. Standard equipment includes a minimum quantity lubrication system and an air blow gun for cleaning the machine! The saw is also equipped with connections for a chip extraction system. Optionally, the machine can be fitted with a digital mitre angle display, a scoring laser, and pneumatic lifting for the safety guard! Features • Large support table, powerful drive motor • Two-button control for triggering the cut (optionally available with one-button control) • User-friendly control panel • Two vertical and two horizontal pneumatic clamping cylinders • Hydropneumatic saw blade lift with oil level indicator • Fixed material fence can be repositioned to increase cutting capacity • Large safety guard covering the entire working area • Minimum quantity lubrication system with 2-liter reservoir • Adjustable blade and cutting feed rate • Air gun for cleaning the machine • Saw blade diameter: 600 mm Fsdpfspa Nxdox Ac Djga Operating Sequence 1. Set the cutting angle 2. Insert the material 3. Adjust the lifting speed 4. Bring clamping cylinders to within 20 mm of the material 5. Clamp the material 6. Press the Start button – the machine is now ready 7. Press and hold both SAW buttons to make the cut 8. After the cycle, release both SAW buttons and press the STOP button 9. Release the clamp and remove or reposition the material Technical data such as cutting range, power output, etc. can be found in the data sheet attached via email. We look forward to your inquiry! Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2026, Aluminum Circular Saw UK 650 HA, Semi-Automatic The semi-automatic circular saw UK 650 HA is an upcut machine primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid material to a limited extent). The machine is characterized by easy operation, quick and convenient material changes, and simple miter angle adjustment. The UK 650 HA features a steplessly adjustable miter range of up to 20° left and right (swivel range twice 70°). Saw feed is automatic at the push of a button, and material clamping is achieved via two pneumatically controlled vertical and horizontal clamping cylinders. Standard equipment includes a minimum quantity lubrication system and an air spray gun for cleaning the machine. Connections for a chip extraction system are available. Additionally, this machine can be optionally equipped with a digital miter angle display, a laser marking system, and pneumatic hood lifting. Features: - Double miter 20°–90°–20°, large support table - Powerful drive motor - Two-button control to initiate the cutting process (single-button control also available) - User-friendly control panel - Adjustable blade/feed rate - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic blade lifting with oil level indicator - Fixed material stop can be moved back to increase cutting capacity - Large safety guard covering the entire working area - Minimum quantity lubrication system with 2-liter reservoir - Air gun for cleaning the machine - Saw blade Ø 650 mm Working Process: 1. Set the cutting angle 2. Insert the material 3. Adjust the stroke speed 4. Bring the clamping cylinders within 20 mm of the material 5. Clamp material 6. Press the start button to ready the machine 7. Press and hold both SAW buttons to perform the cut 8. After cycle completion, release both SAW buttons and press the STOP button 9. Open the clamp and remove or advance material You are welcome to visit our production/showroom to inspect the desired system at any time. Feel free to contact us for an appointment. We look forward to your inquiry! Plantec Maschinen GmbH Fsdpeidun Djfx Ac Dega

Būklė: naujas, Gamybos metai: 2026, Aluminum Circular Saw UK 352 P, manual The semi-automatic circular saw UK 352 P is an "upcut" machine predominantly used for cutting profile materials made from cast aluminum, copper, and hard plastics (solid material cutting is possible to a limited extent). This machine is characterized by its user-friendly operation, rapid and convenient material changeover, and easy adjustment of the mitre angle. The UK 352 P features a steplessly adjustable mitre range from 45° left to 0° right. The saw feed is initiated automatically at the press of a button, and material clamping is performed by two pneumatically controlled vertical clamping cylinders. As standard, this machine is equipped with a minimum-quantity lubrication system and an air blow gun for cleaning the machine. Connections for a chip extraction system are also present. Features - Manual guidance of the saw blade - Dual mitre setting 30° – 90° – 0°, large support plate - High-performance drive motor - Clearly arranged control panel - Two vertical pneumatic clamping cylinders - Fixed material stop, can be shifted rearwards to increase cutting capacity - Large safety cover, encloses the entire working area - Minimum-quantity lubrication system - Air gun for cleaning the machine - Saw blade ø 350 mm Operational Sequence 1) Set the cutting angle 2) Insert the material Fgodpfx Aoidunvoc Dsa 3) Move the clamping cylinder to within 20 mm of the material 4) Pneumatically clamp the material 5) Press the start button to rotate the saw blade 6) The cutting operation must be carried out manually via the hand lever 7) After the cut is complete, switch off the machine You are welcome to visit our production/showroom at any time to inspect the selected machine in operation. Please do not hesitate to contact us about this. We look forward to your inquiry! Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2026, The semi-automatic circular saw UK 352 HA is an "upcut" machine predominantly used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid material with certain limitations). The machine stands out due to its user-friendly operation, quick and effortless material changes, and simple mitre angle adjustment. The UK 352 HA offers a continuously adjustable mitre range of up to 45° to the left and 0° to the right. Saw feed is automatic at the push of a button, while material clamping is accomplished via two pneumatically controlled vertical clamping cylinders. The standard equipment for this machine includes a minimum-quantity lubrication system and an air blow gun for cleaning the machine! Connections for a chip extraction system are also provided. Features • Precision under-table circular saw Fgsdpfx Ajgwt Rroc Dsa • Mitre adjustment: left 45º / 90º / right 45º • Includes 2 pneumatic vertical clamps • Infinitely variable saw blade feed • Two-hand safety control system • Adjustable rear material stop • Extraction unit—chip extraction system • Spray mist device for air-oil cooling • Air gun with spiral hose • Includes maintenance unit with pressure reducer • Ergonomically arranged control panel • Maximum cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included in the delivery! You are welcome to inspect the desired machine at any time in our production/demo hall. Please do not hesitate to contact us. We look forward to hearing from you! Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2026, Aluminum Circular Saw UK 352 M, manual The manual circular saw UK 352 M is an upcut machine, primarily used for individual cuts in aluminum and copper profiles as well as hard plastics (limited to solid material). This machine is characterized by its user-friendly operation, quick and convenient material changes, and easy mitre angle adjustment. The UK 352 M offers a steplessly adjustable mitre range—left up to 45° and right up to 0°. Saw feed is performed manually via a hand lever, and the material is clamped manually. Equipment - Double mitre 45° – 90° – 0° - Large support table - Powerful drive motor - Clearly arranged control panel - One manual clamping cylinder - Fixed material stop can be moved towards the rear to increase cutting capacity - Large safety guard covering the entire working area - Saw blade ø 350 mm Operating Sequence 1) Adjust the cutting angle 2) Insert the material 3) Manually clamp the material 4) Press the start button to activate the saw blade 5) Perform the sawing cut manually using the hand lever Fedpjidunnefx Ac Dega 6) After the cut, switch off the machine! You are welcome to inspect the desired machine at any time in our manufacturing/demo hall. Please do not hesitate to contact us regarding this. We look forward to your inquiry! Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2026, The semi-automatic circular saw UK-400-A is an “upcut” machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid material only to a limited extent). The machine stands out for its easy operation, quick and convenient material changeover, and straightforward mitre angle adjustment. The UK-400 A offers a continuously adjustable mitre range to the left and right up to 20° (swiveling range of two times 70°). The saw feed operates automatically at the push of a button, and the material is clamped by two pneumatically controlled vertical and horizontal clamping cylinders each. Standard equipment for this machine includes a minimum quantity lubrication system and an air blow gun for cleaning the machine! The unit is equipped with connections for a chip extraction system. Optionally, this machine can be fitted with a digital mitre angle display, a marking laser, and a pneumatic device for lifting the safety guard. Features • Precision under-table circular saw • Continuously adjustable mitre setting 0º/ 45º/ 90º/ -45º / -60º • Includes 2 pneumatic clamps (vertical) Fgsdpfsgwt Rnjx Ac Dja • Infinitely variable saw blade feed • Two-hand safety control • Adjustable rear material stop • Chip extraction system • Spray mist device for air-oil cooling • Air gun with spiral hose • Maintenance unit with pressure regulator included • Ergonomically arranged control panel • Max. cutting height 130mm • Saw blade 400mm • Saw blade not included! You are welcome to arrange a viewing of the desired machine at our production/showroom facility at any time. Please feel free to contact us regarding this. We look forward to your inquiry! Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2026, The semi-automatic circular saw UK 352 HA is an upcut machine, primarily used for cutting profile materials made from aluminium castings, copper, and hard plastics (solid materials possible to a limited extent). The machine stands out for its user-friendly operation and quick, convenient material change as well as easy mitre angle adjustment. The UK 352 HA offers a steplessly adjustable mitre range from 45° to the left up to 0° to the right. Saw feed is automatic at the push of a button, and material clamping is performed via two pneumatically operated vertical clamping cylinders. A minimum quantity lubrication system and an air blow gun for machine cleaning are included as standard! The machine also features connections for a chip extraction unit. Equipment: Fgedpfx Acegwt Rye Dsa • Precision under-table circular saw • Mitre adjustment: left 45º / 90º / right -45º • Includes 2 pneumatic vertical clamps • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable rear material stop • Extraction device – for chip extraction unit • Mist lubrication system for air-oil cooling • Air pistol with spiral hose • Includes maintenance unit with pressure regulator • Ergonomically positioned control panel • Max. cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included in the scope of delivery! We look forward to hearing from you! Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2026, slėgis: 6 juosta, The semi-automatic circular saw UK-600-A is an upcut machine primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (solid materials only to a limited extent). The machine stands out due to its user-friendly operation, fast and convenient material changes, as well as easy mitre angle adjustment. The UK-600 A features an infinitely adjustable mitre range of up to 20° left and right (swivel range of two times 70°). Saw blade feed is automatic via push button, and the material is clamped using two pneumatically operated vertical and horizontal clamping cylinders each. As standard, this machine is equipped with a minimal quantity lubrication system and an air spray gun for cleaning the machine. Connections for a chip extraction system are provided. Additionally, this machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic system for lifting the safety guard. Equipment • Precision under-table circular saw • Mitre adjustment 0º/ 45º/ 90º/ -45º / -60º, stepless • Incl. 2 pneumatic clamps (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Extraction device—chip extraction system • Mist lubrication device for air-oil cooling • Air gun with spiral hose • Incl. maintenance unit with pressure regulator Fedpegcbwgefx Ac Dsga • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade 600 mm • Saw blade not included in delivery! You are welcome to inspect the desired system at any time in our production/demo hall. Please feel free to contact us. We look forward to hearing from you! Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2026, The semi-automatic circular saw UK 500 HA is an 'upcut' machine and is primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid material only to a limited extent). The machine is characterized by its user-friendly operation, quick and convenient material changeover, and easy miter angle adjustment. The UK 500 HA offers a continuously adjustable miter range from 30° left to 0° right. The saw feed is automated and activated by push button, while material clamping is handled by two pneumatically controlled vertical and horizontal clamping cylinders each. As standard, the machine is equipped with a minimum quantity lubrication system and an air blow gun for cleaning the machine. Connections for a chip extraction unit are also provided. Equipment • Precision under-table circular saw Fgsdpjgwt R Djfx Ac Dja • Continuously adjustable miter adjustment: 0º/ 45º/ 90º/ -45º / -60º • Incl. 2 pneumatic clamps (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Chip extraction device interface • Air-oil mist lubrication system • Air gun with spiral hose • Incl. maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height: 180 mm • Saw blade: 500 mm • Saw blade not included in scope of delivery! You are welcome to inspect the machine at any time in our production/demo hall. Please feel free to contact us. We look forward to hearing from you! Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2025, Condition: new Year of manufacture: 2025 Stock number: 060103 Delivery time: prompt, subject to prior sale Country of origin: Turkey Price: €7,500 Leasing rate: €121.59 Stock quantity: 1 Special price: €6,300 Saw blade diameter: 350 mm Saw blade dimensions: 350x32x63 mm Saw blade speed: 45 / 80 rpm Mitre angle left: 45° Mitre angle right: 45° Cutting capacity 0° round: 115 mm / square Cutting capacity 45° right round: 110 mm / square Cutting capacity 45° left round: 110 mm / square Motor: 1.8 / 2.2 kW Width: 1,100 mm Depth: 1,000 mm Height: 1,400 mm Weight: 300 kg Semi-automatic circular saw High production capacity, ideal for single pieces and small series Heavy-duty gearbox Cast iron housing Foot switch Hydropneumatic saw head feed for uniform lowering and optimum cutting performance Pneumatic vice 2 cutting speeds Adjustable saw head stroke according to the dimensions of the material to be cut Piece counter Mitre cutting 45° right to 45° left Saw blade not included OPTION: Saw blade Dm. 350 mm €180.00 Fgedewmf Uajpfx Ac Dja

Būklė: naudotas, Transportas 350 EUR Fsdewna Rxopfx Ac Dega

Būklė: naudotas, Gamybos metai: 2001, Pjūklo disko skersmuo: 350 mm Spaustuvo atidarymas: 190 mm Sukimosi greičiai: 15 / 30 / 45 / 90 aps./min. Fgodpfx Aeyvvpmjc Dsa Variklio galia: 1,8 / 2,6 kW

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2014, Saw blade diameter: 350 x Ø 32.0 mm Cutting range at degrees: flat 175 x 75 mm Cutting range at degrees: square 110 x 110 mm Cutting range at degrees: flat 100 x 80 mm Cutting range at degrees: square 85 x 85 mm Speed: 3,000 rpm Total power requirement: 1.5 kW Machine weight approx. 180 kg Required space approx. 870 x 710 x 1435 mm Equipment: - Semi-automatic circular saw for cutting PVC and aluminum profiles - Two-hand safety operation - Mitre adjustment: * Left * Right 0 / + / + - Large safety guard, covers the entire working area - Saw blade included - 2x vertical pneumatic clamping cylinders - Adjustable blade/cut feed - Air blow gun Work process: 1) Set the cutting angle 2) Insert the material 3) Adjust the feed speed 4) Move clamping cylinders up to 20 mm towards the material Fodpeyu U Dfefx Ac Djga 5) Clamp the material 6) By pressing the start button, the machine is ready for operation. 7) Press and hold both SAW buttons – the material will be cut. 8) After the cycle is finished, release both SAW buttons and press the STOP button. 9) Open the vice and remove or advance the material. * Special accessories included: - ALU chip extraction

Būklė: naujas, Gamybos metai: 2026, Aluminium Circular Saw BC 450 HA, Semi-Automatic (MG FRONT-450) The BC 450 HA is a double mitre saw with a swivel range of 45° to the left and 22.5° to the right, featuring automatic mitre adjustment via stop functions. The saw feed operates automatically and the material is clamped pneumatically. The saw blade (450 x 30 mm) runs horizontally. Additionally, this machine can optionally be equipped with a digital mitre angle display, a laser marking system, and pneumatic lifting for the safety guard! Equipment - Double mitre saw with high-performance drive motor - Two-button control for initiating the saw cut (optionally available with single-button control) - Large mitre range from -22.5° to +45°, Swivel range 67.5° – 0° – 45° - Automatic mitre adjustment, fixed stop functions at -45° / 90° / +45° and two adjustable stop functions for custom angles - Two horizontal pneumatic clamping cylinders - User-friendly control panel - Large safety guard covering the entire working area, Fedpfxjpa Nxae Ac Djga pneumatically lifted - Adjustable blade/feed rate - Connections for extraction system - Minimal quantity lubrication system - Air gun for cleaning the machine - Saw blade ø 450 mm Working Process 1. Set the cutting angle 2. Insert the material 3. Adjust the feed speed 4. Bring the clamping cylinders up to 20 mm from the material 5. Clamp the material 6. Press the start button to ready the machine 7. Press and hold both SAW buttons to begin cutting 8. Once the cycle is complete, release both SAW buttons and press the STOP button 9. Open the clamp and remove or advance the material Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2026, Aluminum Circular Saw UK 800 HA, Semi-Automatic The semi-automatic circular saw UK 800 HA is an upcut machine, primarily used for cutting profile materials made of cast aluminum, copper, and rigid plastics (to a certain extent, also solid materials). The machine stands out due to its user-friendly operation, quick and convenient material changes, and easy adjustment of mitre angles. The UK 800 HA features a steplessly adjustable mitre range to the left and right up to 20° (swivel range 2 × 70°). Saw feed is automatic at the push of a button, and material clamping is achieved by two pneumatically operated vertical and two horizontal clamping cylinders. Standard equipment includes a minimum quantity lubrication system and an air blow gun for cleaning the machine! Connections for a chip extraction system are provided. Additionally, this machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic system for lifting the safety guard. Equipment - Double mitre 20° – 90° – 20°, large support table - Powerful drive motor - Two-button control to trigger the sawing operation (optionally also available with single-button control) - Clearly arranged control panel - Adjustable blade and cutting feed - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lifting with oil level indicator - Fixed material stop jaw can be shifted rearwards to increase cutting capacity - Large safety guard covering the entire working area - Minimum quantity lubrication system with 2-liter reservoir - Air gun for cleaning the machine - Saw blade diameter 800 mm Fsdpsidun Iefx Ac Dega Operating Procedure 1. Set the cutting angle 2. Insert the material 3. Adjust lifting speed 4. Bring the clamping cylinders up to 20 mm from the material 5. Clamp the material 6. The machine is ready for operation by pressing the start button. 7. Press and hold both SAW buttons; the material is cut. 8. After the cycle is complete, release both SAW buttons and press the STOP button 9. Open the clamping jaws and remove or reposition the material. You are welcome to view the desired system at our manufacturing/demonstration hall at any time. Please feel free to contact us. Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2026, The semi-automatic circular saw UK 352 HA is an "upcut" machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (also suitable for solid material to a limited extent). The machine stands out for its ease of use and quick, convenient material changeover as well as simple miter angle adjustment. The UK 352 HA features a continuously adjustable miter range from 45° left to 0° right. Saw feed is automatic via push-button, with material clamping provided by two pneumatically operated vertical clamping cylinders. As standard, this machine is equipped with a minimum quantity lubrication system and an air blow gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Features • Precision under-table circular saw • Miter adjustment: 45º left / 90º / 45º right • Includes 2 pneumatic vertical clamps • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable rear material stop • Extraction device – chip extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • Includes maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height: 125 mm • Saw blade size: 350 mm • Saw blade not included in delivery! Fsdpfx Acegwt Rve Doga You are welcome to inspect the desired machine at any time in our production/demonstration hall. Please feel free to contact us for an appointment. Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2026, Aluminum Circular Saw UK 350 M, manual The UK 350 M is a manual table circular saw designed for simple and safe operation. This machine enables double miter cuts to the right and left up to 45°. Miter angle adjustment is made by rotating the stop jaw. The UK 350 M features a compact design with an intuitive control layout. The saw cut is performed manually, cutting from below into the workpiece. Clamping of the material is also carried out manually. The cutting area is equipped with a fixed safety guard. Equipment - Compact, fully enclosed design with intuitive controls - Manual clamping device - Fixed safety guard over the cutting area - Saw blade diameter: 350 mm Operating Procedure 1) Set the cutting angle 2) Insert the material 3) Clamp the material manually 4) Press the start button to engage the saw blade 5) Perform the saw cut manually using the hand lever 6) Switch the machine off after the cut Without base frame (optionally available) You are welcome to inspect the desired machine at any time in our production/demo hall. Please feel free to contact us to arrange a visit. Fgsdpfx Acsidqk So Dsa Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2026, Aluminum Circular Saw UK 300 M, manual The UK 300 M is a manual table circular saw designed for simple and safe operation. This machine enables double mitre cuts to the left and right up to 45°. The mitre adjustment is carried out by rotating the fence jaw. The UK 300 M features a compact design with an intuitive control layout. Cutting is performed manually, with the saw blade moving upwards through the workpiece. Material clamping is also done manually. A fixed guard reliably covers the cutting area. Equipment features: - Compact, fully enclosed design with user-friendly controls - Manual clamping device - Fixed guard in the cutting area - Saw blade diameter: 300 mm - Manual feed of the saw blade - Mitre adjustment: left 45º / 90º / right 45º - Integrated manual length stop - Ideally suited for mobile use - Optimal for profile and section cuts Work process: 1) Set the desired cutting angle 2) Place the material 3) Manually clamp the material 4) Start the saw blade by pressing the start button 5) Perform the cutting operation manually using the hand lever 6) Switch off the machine after completing the cut Supplied without base frame (available optionally)! Fodpeidqahofx Ac Djga You are welcome to inspect the desired machine at any time in our production/demo hall. Please feel free to contact us to arrange an appointment. Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2026, The UK-350-P is a manual table circular saw with simple and safe operation! With this machine, double mitre cuts to the right and left are possible up to 45°. The mitre adjustment is performed by rotating the fence jaw. The UK-350-P features a compact design with a user-friendly control layout. The sawing cut is performed manually from beneath into the material to be processed. The material is pneumatically clamped. A fixed guard protects the cutting area. Equipment • Precision aluminum circular saw • Two-hand safety control • Mitre adjustment left 45°, 90°, right 45° • Max. cutting height of 125 mm • Manual saw blade feed • Includes 2 pneumatic vertical clamps • Ideal for profile cutting • Includes maintenance unit with pressure regulator • Ergonomically positioned control panel • Adjustable stop rail for slitting material Without base frame (available optionally)! You are welcome to inspect the desired unit at any time at our production/demo facility. Please feel free to contact us for a viewing appointment. Fgjdpfx Aegcbuwec Doa Plantec Maschinen GmbH

Būklė: naujas, Gamybos metai: 2026, UK 300 P – Manual Table Circular Saw with Pneumatic Clamping The UK 300 P is a compact, manual table circular saw equipped with a pneumatic clamping device for easy and safe operation. Thanks to its double mitre cut capability, cuts to the right and left up to 45° are possible. The mitre angle is conveniently adjusted by rotating the stop tray. Features: ✔ Enclosed, compact design with intuitive operation ✔ Two pneumatic clamping cylinders for secure material fixation ✔ Fixed guard for the cutting area ✔ Saw blade Ø 300 mm for precise cuts ✔ Manual feed for maximum control ✔ Minimum quantity lubrication for clean cuts ✔ Mist spray unit for air-oil cooling Work Sequence: Setting the cutting angle Placing and pneumatically clamping the material Activating the saw via start button Manually making the saw cut using hand lever Switching off the machine after cutting Technical Data: ✔ Drive power: 1.4 kW / 400 V / 50 Hz ✔ Cycle control: manual (pneumatic clamping) ✔ Rated speed: 3,000 rpm ✔ Saw blade dimensions: 300 x 32 mm Fsdjidqbbopfx Ac Dega ✔ Machine dimensions: 700 x 500 x 900 mm ✔ Weight: 80 kg Cutting Capacity: 90° cut: max. 100 mm / 85 x 85 mm / 120 x 50 mm / 75 mm 45° R/L cut: max. 80 mm / 60 x 60 mm / 75 x 45 mm / 65 mm Optional Accessories: 🔹 Machine base frame (Art. No. 30002) 🔹 Material roller conveyor 🔹 Length stop of the MD 50 series 🔹 Material roller stand (Art. No. 10002) 🔹 High-performance lubricant for aluminium (Art. No. 80004) The UK 300 P offers a simple, safe and flexible solution for precise cuts in various materials. Plantec Maschinen GmbH

Gamybos metai: 2019, būklė: paruoštas naudoti (naudotas), Papildoma įranga Starterio rinkinys 1, sudarytas iš 2 apskritųjų pjūklo diskų ir 10 litrų aušinimo skysčio koncentrato. Fgedpfxox Nr Sqe Ac Dsa Lygiavimo elementas (1 komplektas = 4 vnt.) su varžtu M 12x100. Padavimo pusė – kairė. Padavimo ritininis transporteris URB 290, ilgis 3000 mm. Padavimo adapteris URB 290/400. Išvedimo ritininis transporteris URB 290, ilgis 2000 mm. Pašalinimo adapteris URB 290/400. Jungiamasis elementas prie įrenginio, tvirtinamas dešinėje pusėje. LM 55 M/man. ilgio ribotuvas, matavimo ilgis 2000 mm. Ši BERG & SCHMID VKS 370 VA pagaminta 2019 m. Tai visiškai automatinė hidropneumatinė vertikali apskrito pjūklo staklės su CNC dažnio keitikliu. Įranga turi ritininį transporterį padavimo pusėje (3 m) ir išvedimo pusėje (2 m), pagerinantį medžiagų tiekimą ir išvedimą. Pridedamas Starterio rinkinys 1 su apskritais pjūklo diskais ir aušinimo skysčio koncentratu. Pasinaudokite proga įsigyti šias BERG & SCHMID VKS 370 VA apskrito metalo pjūklo stakles. Susisiekite dėl papildomos informacijos. Panaudojimo sritys Pjovimas

Būklė: paruoštas naudoti (naudotas), Maszyna jest odłączona od zasilania. Fgedpfjhva I Ijx Ac Doa

Būklė: labai geros būklės (naudotas), Offered here is a heavy-duty, well-maintained cold circular saw from Trennjäger. Specifications: Saw blade: 275 x 2.5 x 40 T8 = Z110 Two speeds Mitre adjustment: from 90° to 0° Equipment: Hydraulic vice Hydraulic feed (infinitely adjustable) Integrated coolant system Fodpfx Acog Rxh Dj Dsga

Būklė: naujas, Gamybos metai: 2025, Cutting range round: 20 - 100 mm Cutting range square (W x H): 20 x 70 mm Shortest length of cut piece: 5 mm Shortest remnant length in automatic mode*: 65 mm Shortest remnant length in single cut: 30 mm Length: 2300 mm Width incl. swarf conveyor: 2260 mm Height: 2210 mm Material support height: 925 mm Machine weight approx.: 3950 kg Total connected load: 26 kW Saw motor power: 18.5 kW Hydraulic motor power: 2.2 kW Infinitely variable cutting speed: 30-160 rpm Saw feed speed: 0.3-30 mm/s Automatic material feed length, single stroke: 800 mm Automatic material feed length, multiple stroke: 9999 mm Saw blade diameter: 360 mm Saw blade bore: 40 mm Saw blade thickness: 2.25 mm Standard equipment Fully enclosed safety guard as per CE standard 45° servo feed CE-compliant electrical safety Main drive permanent magnet motor HMI + pushbuttons Frequency inverter Mist spray system (2L) Chip extraction system Cutting tube jetting device Cabin air conditioner LED work light Automatic swarf conveyor (spiral) Vise pressure regulator Motorized chip brush Upper clamp Hydraulic cooling fan Automatic lubrication system Basic roller table Saw chip collection trolley 70 (L) Toolbox (wire brush, leveling pads, touch-up paint) Circular saw blade Optional equipment optional: JLH-EHA Saw Master UL electrical safety Third vise Automation options 1.5 m powered outfeed roller table 2 m servo powered outfeed roller table Fgedpfx Ajwaa Dvec Dsa 5.5 m inclined powered magazine (rectangular material) 5.5 m sloped powered magazine (round material) 5.5 m magazine with belt feeder (round material)

Būklė: naudotas, Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, galia: 5,5 kW (7,48 AG), įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, pjovimo aukštis (maks.): 128 mm, pjūklo disko skersmuo: 400 mm, pjūklų disko skylė: 30 mm, sukimosi greitis (maks.): 5 000 aps./min, sukimosi greitis (min.): 3 000 aps./min, bendras svoris: 1 050 kg, stalo ilgis: 3 200 mm, Naudota Socomec formatinė diskinė pjovimo staklė Galax 320EL yra galinga formatinė diskinė pjovimo staklė. Staklės išsiskiria stabiliu korpusu ir universaliu pritaikymu masyvios medienos ir plokščių medžiagų pjovimui. Fgsdpsyyl Akjfx Ac Dja Staklių komplektacija Formatinė diskinė pjovimo staklė su slankiuoju vežimėliu Lygiagretus liniuotės ribotuvas Skersinis ribotuvas su kampo reguliavimu Išankstinio pjovimo įrenginys Stabili ketaus stalo konstrukcija Ištraukimo jungtis Kiti techniniai duomenys Sūkių dažnis: 3000/4000/5000 aps./min.