Automatinis diskinio pjūklo galąstuvas

WINTER sawmax 600

Būklė: naujas, Gamybos metai: 2025, Dimensions (Length/Width/Height): 1400 x 1300 x 1800 mm Weight: 0 kg Total power required: 2.2 kW Ijdpfsv A Hgkox Aausia Saw blade sharpening machine SAWMAX 600 ECO - Saw blade diameter min./max.: 80 – 800 mm - Saw blade bore: 10 – 200 mm - Maximum saw blade thickness: 1 – 7 mm - Tilting range: 7 – 100 mm - Grinding range for rake angle: -3° to +30° - Grinding range for clearance angle: 6° to 40° - Grinding range for re-sharpening angle (tooth tip/tooth face): 45 degrees - Grinding cycle adjustment range: 0 – 25 mm - Grinding speed: 0.5 – 6 mm/s - Maximum speed: 20 teeth/min - Negative bevel grinding: -27 degrees - Grinding head can be rotated at angles of 90° and 180° - Grinding wheel diameter: 125 – 32 mm - Peripheral speed: 26 m/s - Coolant pump capacity: 25 L/min - Hydraulic working pressure: 4.0 MPa - Oil tank capacity: 80 L - Total power: 1.85 kW / 2.2 kW - Dimensions: L = 1400 mm, W = 1300 mm, H = 1800 mm

Gamybos metai: 1991, būklė: paruoštas naudoti (naudotas), Axes: 5, max. grinding wheel diameter: 150 mm, spindle speed: 9,000 rpm, workpiece spindle speed: 1,500 rpm, clamping spindle speed: 13,000 rpm, travel X/Y/Z: 200 mm/190 mm/150 mm, tool holder: HSK-50. Machine dimensions X/Y/Z: approx. 1,700 mm/1,400 mm/1,800 mm, control: NumRoto 1060. Control unit defective. Includes coolant pump and coolant tank, grinding wheel set with 12x holders. Documentation available. On-site inspection possible. Iodpfx Asvu Dfboaujia

Būklė: naujas, Gamybos metai: 2025, Matmenys (ilgis/plotis/aukštis) 1800x930x1500 mm Svoris 700 kg Bendras galingumo poreikis 1,65 kW Diskinio pjūklo galąstuvas SAWMAX 600 PRO - Pjūklo disko minimalus/maksimalus skersmuo: 80-815 mm - Pjūklo disko skylė: 10-220 mm - Maks. pjūklo disko storis: 6 mm - Dantų žingsnis: 7-100 mm - Pjaunamojo kampas: nuo -10° iki +40° - Galandinimo galvutė gale: 6°–45° - Dantuko viršūnių kairės-dešinės padalijimas 45°, dantuko paviršius 45° - Galandimo ciklo reguliavimo diapazonas maks. 25 mm - Galandimo greitis: 0,5–6 mm/s - Pastūmos greitis maks. 24 dantys/min - Šlifavimo disko skersmuo: 125–32 mm - Apskritiminis greitis: 28 m/s - Aušinimo skysčio siurblio našumas: 25 l/min - Aušinimo sistemos talpa: 80 l Iijdpjv A Hgqsfx Aauea - Bendra galia: 0,75 kW*2+0,15=1,65 kW - Matmenys: Ilgis=1800, Plotis=930, Aukštis=1500 mm - Svoris: 700 kg

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus,

Būklė: naudotas, mašinos/transporto priemonės numeris: 007687, Type of attached edge: thin edge, thick edge, solid wood Iisdpfx Aaswuz Npeuoa Glue application system: EVA, hot air Jointing milling: yes Multi-functional unit: yes Maximum feed speed: 18 m/min Maximum panel thickness: 60 mm Working units: 7 pcs

Būklė: naudotas, Number of sanding units: 4 pcs. Sanding width: 190 mm Max. sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2x180, 2x120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from top/bottom Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. High-stability premium version with innovative features. Designed for high continuous load even with greater material removal. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, each from top and bottom 1st sanding unit: heavy steel roller 2nd sanding unit: rubber-coated roller and shoe 3rd finishing unit: fiber brush (see optional equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional stability - External cooling of sanding zones for cooler sanding and longer belt life - Forced pneumatic belt oscillation - Effective dust extraction directly at the sanding rollers - Airborne dust extraction at tension rollers - Integrated brushing and finishing unit with large dust extraction - Motorized sanding thickness adjustment via precision lead screws and large linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Removal adjustment below via precision lead screw with scale ring (resolution 0.1mm) - Pneumatic belt tensioning with constant tension pressure - Quick belt change with pneumatic belt release in seconds - Adjustable sanding belt tracking during belt changes - Electropneumatic compressed air monitoring - Infeed protection via contact roller for oversized workpieces - Workpiece transport via calibrated, slip and adhesive-resistant conveyor belts over heavy cast iron tables with finely planed surfaces and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece transport - Feed gear motor with stepless speed control 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical Data: - Belt speed: 22 m/s - Belt length: 1,800mm - Belt width: 200mm - Working width: 190mm - Sanding thickness: 2–180mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200mm at 0.37 kW each - Extraction ports: 2 x 180mm, 2 x 120mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870mm - Length (with Softdisc 2,740mm): 2,600mm - Length with control panel (with Softdisc 3,035mm): 2,985mm - Width: 880mm - Height: 1,910mm - Approx. weight: 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant Iisdovu Hgbopfx Aauja Equipped with the following options: - Sanding belt air blow-off 4-belt via nozzles directly at the radii ...

Būklė: labai geros būklės (naudotas), Four-Side Planer Weinig Unimat 23 EL Working width: 230 mm Working height: 160 mm Spindle arrangement: Bottom – 5.5 kW Right – 4 kW Left – 5.5 kW Right – 4 kW Iijdpferb An Uex Aauea Top – 11 kW Bottom – 5.5 kW Top – 7.5 kW Bottom – 7.5 kW Feed speed adjustable via variator: 6–36 m/min Feed driven by cardan shaft Table with powered rollers Pneumatic pressure units CE certificate Year of manufacture: 2003

Būklė: labai geros būklės (naudotas), HM piła ostrzarka VOLLMER model Akemat B4 rok prod. 2001 Iisdpjui S Euofx Aauoa

Būklė: naujas, Gamybos metai: 2026, No matter what job you need to cut, the A700 is the only saw you'll ever need. With the largest cutting capacity in its class and an extensive ±75º mitre angle range, the A700 is engineered for high-precision, high-angle mitre cuts—without limiting the profile sizes you need to process. This saw is ideal for bundle-cutting multiple aluminium profiles simultaneously, delivering exceptional accuracy. Enjoy high-speed aluminium processing with precise PLC-controlled movements. The pneumatically actuated safety guard opens and closes at the press of a button, granting full, unobstructed access to the saw table. An integrated safety switch disables operation whenever the guard is lifted, ensuring maximum workplace safety. Iedpfx Aajmb U Tususia Optional CNC-controlled saw mitre angle positioning is available, complete with intuitive touch-screen controls. • Ø700 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety compliance, two-hand operation for cutting • Overhead safety guard with 900 mm safety tunnels on each side • Guard lifts pneumatically at the push of a button • Safety switch disables saw operation if guard is raised • 2× vertical clamps and optional 2× horizontal clamps with adjustable pressure settings • Mitre angle adjustment ±75°, positive stops at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior workspace lighting • 2 × Ø100 mm chip extraction outlets • Optional 2.2 kW dust extraction unit • Optional automated mitre control system Ideal for: • Mass aluminium fabrication • Mitered aluminium structure production • Window and door manufacturing • Blinds, shades and furniture production • Engineered aluminium assemblies • Aluminium façade construction

Būklė: visiškai atnaujintas (naudotas), REKORD 400 MODIFIED WITH TRAY AND COOLING SYSTEM SHARPENING MACHINE FOR CIRCULAR SAWS MADE OF CARBIDE AND HSS (FULL OIL PROCESSING) FEATURES Ijdpfx Aaoh A N R Seueia Grinding wheel diameter: 150 mm Grinding wheel motor: 1 HP 0.25 HP movement motor for grinding carriage Cooling system indicator (fully oil-bath) Electronic cam reading system (SLOW CONTROLLED BACK FINISHING) Magnifying lamp (FOR SMALL TEETH) Sharpening speed electronically adjustable via potentiometer Manual cutting angle adjustment using scale rod No. 1 Copying wheel No. 1 Diamond wheel, diameter 150 x 4 - 60° angle No. 1 Bakelite wheel for HSS Minimum blade diameter: 30 mm (with small blade holder on request) Maximum blade diameter: 400 mm