Mikron Wf 21 pirkti naudotą (187)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1995, Travel X/Y/Z: 710mm/630mm/500mm, Table dimensions X/Y: 1200mm/600mm, Max. table load: 500kg, Tool stations: 22, Tool holder: SK40, Spindle speed: 6,300rpm, Feed rate: 10m/min, Rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 2,400mm/3,400mm/2,300mm, Weight: approx. 4,600kg, Control: Heidenhain TNC 426. Includes through-spindle coolant (IKZ) and external cooling. Documentation available. On-site inspection possible. Kjdpfx Aow Exr Aecusnc

Sąlyga: naudotas, Gamybos metai: 1985, Wheel diameter – max. 80 mm Wheel width 150 mm Module – max. 2.5 Module – min. Total power requirement 10 kW Machine weight approx. 2,400 kg Fully automatic hobbing machines for worm gear cutting Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: Max. wheel diameter without parts magazine approx. 80 mm Max. wheel diameter with parts magazine approx. 50 mm Max. module 2 / 2.5 Axial cutting length approx. 150 mm Max. workpiece installation length approx. 200 mm Milling slide swivels up to 90 degrees Cutter – diameter 24 – 50/63 mm Max. radial travel of the milling slide 0–14/18 mm Max. milling cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Axial feed rate stepless 0.05 – 4.0 mm/rot. Radial feed rate stepless 0.2 – 200 mm/min. Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Accessories / Special equipment: Ksdpet Hw D Rofx Acujnc Fully automatic operating cycle and minimal auxiliary times enabled by freely programmable SIEMENS programmable controller S5 for all machining steps, e.g. rapid traverse, feed, cutter on/off, for loading device, tailstock, possible shifting, etc. With piece counter, program numbering, and 30-position digital error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm in length x 8 mm Ø, with pneumatic double gripper for loading and unloading workpieces; raw parts are placed in exchange cassettes outside and then inserted into the loading unit. The double gripper places the parts between the workpiece spindle and tailstock; the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and also returned to the (finished parts) cassette by the gripper. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration and under power. Machine is set up for cutting worm shafts/armature shafts used in variable transmissions for automotive seat adjusters, window regulators, etc.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1997, Steuerungseinheit Marke: HEIDENHAIN Modell: TNC 410/426 Werkzeuge Maximales Werkzeuggewicht: 12 kg Knodswqh Tmepfx Acusc Maximaler Werkzeugdurchmesser: 200 mm Werkzeugaufnahme: SK 40 / DIN 69871 Zusätzliche Ausstattung Geräuschemission: Schallleistungspegel 75 dB (A) Dieses 3-Achsen-Bearbeitungszentrum MIKRON UM 600 wurde 1997 gefertigt. Wenn Sie auf der Suche nach hochwertigen Fräskapazitäten sind, ist die MIKRON UM 600, die wir zum Verkauf anbieten, eine Überlegung wert. Kontaktieren Sie uns gerne für weitere Informationen. Einsatzbereiche Fräsen

Sąlyga: naudotas, ACCESSORIES - With Zellio SR3 automatic device Kodpsuhbqpofx Acuonc - Including No. 11 tilting loading magazine and vibrator - Piece diameter: 2.50 to 12.5 [mm] - Piece length: 0.30 to 30 [mm]

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, veikimo valandos: 105 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 107.32.99.023, X ašies eiga: 530 mm, Y ašies eiga: 450 mm, Z ašies eigos atstumas: 450 mm, X ašies padavimo greitis: 22 m/min, padavimo greitis Z ašis: 22 m/min, veleno greitis (min.): 22 000 aps./min, tvirtinimo skersmuo: 63 mm, Įranga: drožlių transporteris, sūkių greitis be galo kintamas, Please provide your offer price. Knjdpfxsw A Au No Acusc Sales only within Europe, including Turkey. Price excluding packaging; Delivery terms: FCA (machine location) ===== For technical specifications, please refer to the attached handout. All warranty and guarantee rights are excluded. We do not assume any responsibility for the accuracy of the technical data and year of manufacture, the completeness of accessories and tool equipment, or compliance with all safety and environmental protection requirements specified in accident prevention regulations. No sales to private individuals.

Sąlyga: naudotas, Gamybos metai: 1995, x-axis travel: 750 / 1000 mm y-axis travel: 600 mm z-axis travel: 600 mm Control: Heidenhain TNC 426 Machine weight: approx. 6,500 kg Space requirements: approx. 2500 x 3300 x 2500 mm MIKRON VC 750/1000 – CNC Vertical Machining Center Travel: X-axis: approx. 750 / 1000 mm Y-axis: approx. 600 mm Z-axis: approx. 600 mm Table: Table size: approx. 1080 x 580 mm Number of T-slots: 7 Knodpfx Acewm Rqyjuoc T-slot pitch: 90 mm T-slot width: 14 mm Max. table load: approx. 1,000 kg Spindle: Spindle speed: 50 – 5,000 rpm Spindle taper: ISO 40 Spindle power: approx. 11 kW Tool changer: Number of tool stations: 30 – 36 Tool holder: ISO 40 Feed and rapid traverse: Rapid traverse X/Y/Z: approx. 15 m/min Control: Heidenhain TNC 426 Machine dimensions and weight: Dimensions (L x W x H): approx. 2500 x 3300 x 2500 mm Weight: approx. 6,500 kg

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1994, Stations: 24, Substations: 20, Side stations: 20, Axes: 2 per station, Collets: 24, Production output single/double cycle: 120/240 pcs/min, Stroke: 35mm, Max. workpiece diameter: 25mm, Spindle speed: 20,000 rpm, Machine weight: approx. 2,650kg, Control system: Mikron MAC 50, Operating hours: approx. 17,335h. Documentation available. An on-site inspection is possible. Knodjw Emx Rjpfx Acusc

Sąlyga: naudotas, Gamybos metai: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. (not specified) Total power requirement 20 kW Machine weight approx. 6 t Space requirement approx. (not specified) CNC-controlled horizontal hobbing machine with workpiece portal loader, model A 35 / 36 CNC, year of manufacture 1992 Workpiece diameter / wheel diameter with automatic loading max. 150 mm Kodpfx Acst Hwxbeuonc Workpiece diameter with manual loading max. 200 mm Max. workpiece length approx. 400 mm Axial milling length (Z axis) 300 mm Module range for HSS/Carbide cutters 3 / 4.5 mm Number of teeth min./max. 2–999 Centre distance tool–workpiece min./max. 0–190 mm Workpiece rotation speed max. 0–350 rpm Milling slide swiveling left/right 50 / 60° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y axis) 100 mm Radial slide travel max. (X axis) 10–150 mm Tailstock travel max. (W axis) 420 mm Cutter speed stepless 0–1,500 rpm Feed range on all axes steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total power approx. 20 kW – 220 V/400 V / 50 Hz Weight approx. 6,000 kg Accessories / Special Equipment: MIKRON CNC control type 788 (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with conversational programming for creating various gearing cycles, such as helical gearing, worm and worm wheel gearing, crowned gears, with and without shifting, as well as further subprograms. Heavy duty shifting milling head with high cutter speeds and long shifting path, also for 2 cutters, with quick-change system and hydraulic counterbearing. Workpiece spindle head (C) with quick-change system (collet chuck) Heavy tailstock with 420 mm travel (W), in combination with an automatic workpiece loading device from GÜDEL Switzerland with a linear portal loader (approx. 1000 mm stroke (V)), swiveling double gripper with jaws for loading and unloading shaft-shaped workpieces (currently approx. 60 mm length x 25 mm Ø x module 1.5), however, without workpiece storage device. Separate coolant unit with magnetic chip conveyor Enclosed full machine guarding with sliding doors 2 machines with workpiece marking devices by BORRIES, unfortunately otherwise without accessories.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2004, X ašies eiga: 600 mm, Y ašies eiga: 450 mm, Z ašies eigos atstumas: 450 mm, nominali (akivaizdi) galia: 10 kVA, bendras svoris: 6 500 kg, veleno greitis (maks.): 20 000 aps./min, Heidenhain TNC530, 4-osis daliklis, velenas 12 200 aps./min. HSK 63, stalas 850x530 mm, eiga 600x450x450 mm, 30 įrankių keitiklis, svoris 6500 kg. Kjdpfx Acsw Dc Irsuonc

Sąlyga: geras (naudotas), Gamybos metai: 1995, Maszyna jest w dobrym stanie technicznym. Jednostka sterująca: TNC 426 Ksdpfouzimnex Acusnc

Sąlyga: naudotas, Safety switch, safety interlock switch, guard door switch, limit switch, push button, fuse switch, position switch, magnetic interlock switch, safety locking device -Manufacturer: Schmersal, safety locking device from CNC milling machine Mikron UME 600 -Type: AZM 161SK-33rka-024 IEC 60947-5-1 Kedpfxjrcnm Ns Acuenc en: see photo of nameplate -Transport dimensions: 270/260/H60 mm -Weight: 1.5 kg

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2001, x-travel 600 mm Kedpfx Ajwmzgfjcuonc y-travel 450 mm z-travel 450 mm Machine weight approx. 6,500 kg Space requirement approx. 3,900 x 3,500 x 2,700 mm MIKRON VCP 600 – CNC Vertical Machining Centre (Year of manufacture: 2001) The MIKRON VCP 600 is a precise 3-axis CNC vertical machining centre, ideally suited for high-precision machining of complex workpieces. With its robust construction, powerful spindle, and reliable Heidenhain control, it meets the highest demands in both single-part and series production. All information is provided without guarantee. Exact technical data available upon purchase. Control: TNC 426/430 Travels X-axis: 600 mm Y-axis: 450 mm Z-axis: 450 mm Table Table size: 850 x 530 mm Max. table load: 400 kg Number of T-slots: 6 T-slot pitch: 63 mm T-slot width: 14H12 mm Spindle Spindle speed: 100 – 20,000 rpm Spindle power: 12 / 16 kW Tool interface: HSK-A63 Tool Changer Number of tool positions: 30 Max. tool diameter: 90 mm Max. tool diameter with adjacent slots empty: 110 mm Max. tool length: 250 mm Max. tool weight: 6 kg Chip-to-chip time: approx. 7 seconds Feed and Rapid Traverse Feed rate: 0 – 22,000 mm/min Rapid traverse: 22 m/min Feed force (X/Y/Z): 5,000 N Dimensions and Weight Machine weight: approx. 6,500 kg Installation dimensions (L x W x H): approx. 3,900 x 3,500 x 2,700 mm

Sąlyga: naudotas, PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, PCB -Manufacturer: Mikron, electronic module circuit board from CNC milling machine Mikron UME 600 -Type: 958 78 11 200 -Dimensions: 145/110/H55 mm Knodpferc Ilgsx Acujc -Weight: 0.4 kg

Sąlyga: naudotas, PLC control, electronic modules, PLC module, plug-in board, PCB - Manufacturer: Mikron, electronic module circuit board for h. TCD22 Ovp Knodsk Aua Nepfx Acuec - Type: WW TCD 22 . 104.73.20.041 - Carton dimensions: 410/310/H65 mm - Weight: 0.6 kg

Sąlyga: naudotas, CNC control, operator console, machining center operator panel, control unit, operator panel, operating unit -Manufacturer: Mikron, control unit from CNC milling machine Mikron UME 600 -Type: TCD 22 - DIN 8659 Kedpforcnmwsx Acusnc -PCB: WW TCD 22 Operating Unit 104.73.20.042 -Individual components: see photos -Dimensions: 480/240/H160 mm -Weight: 5.3 kg

Sąlyga: naudotas, Angle measuring device, encoder, rotary encoder, absolute rotary encoder Knsdpfeqrwxajx Acusc -Manufacturer: Heidenhain, angle measuring device with integrated bearing, original packaging -Type: RCN 619.5GS5-19B00 No.: 249 003-19 -Quantity: 2 measuring devices available -Price: per unit -Dimensions (box): 180/140/H90 mm -Weight: 1.0 kg

Sąlyga: naudotas, CNC control system, operator panel, logic unit, path control Ksdpfx Acjpz Sf Ejujnc - Manufacturer: Heidenhain, path control logic unit - Type: LE 407 A 236 484 10 - Individual components: see photos - Dimensions: 480/330/H140 mm - Weight: 9.5 kg

Sąlyga: naudotas, Safety switch, protective fence switch - Manufacturer: Euchner, safety switch removed from Mikron UME 600 CNC milling machine - Model: TZ2LEO24M - Serial no.: 090559 - For details, see type plate photo - Dimensions: 170/110/40 mm - Weight: 1.1 kg Ksdpforb E E Ejx Acujnc

Sąlyga: geras (naudotas), Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: Mikron, tool changer from CNC machining center Mikron UME 600 -For: max. 22 tool holders -Taper: SK40 Kjdpfxjrb E E Ns Acuonc -Dimensions: 1200/1150/H860 mm -Transport weight: 294 kg

Sąlyga: naudotas, Auxiliary current switch, circuit breaker, miniature circuit breaker, load disconnect switch, load isolator, power circuit breaker, power isolator, auxiliary switch, main switch - Manufacturer: Mikron, main load disconnect switch from CNC milling machine Mikron UME 600 - Adapter: Heidenhain Type: 239 758 01 - Dimensions: 430/150/115 mm Knjdpferc Ilnex Acujc - Weight: 1.1 kg

Sąlyga: naudotas, Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, compound slide, dovetail guide, tool slide, cross table Ksdpfx Aerc Ik Hocujnc -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron UME 600 -Motor: Siemens 380V 3.7/5.25 kW, see photo of nameplate -Speed: 1500/9000 rpm -Spindle head: SK40 mounting -Dimensions: 1550/560/H735 mm -Weight: 555 kg

Sąlyga: naudotas, SPS controller, power module, LT module, I/O module, regenerative feedback module, CNC controller, safety plug-in universal module, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: Mattle Mikron, safety plug-in universal module circuit board from Mikron UME 600 CNC milling machine -Safety plug-in: Type SEMU TN 24VDC Knjdorb E Ewspfx Acuoc -Circuit board: Mikron 958 74 10 275 S300 -Dimensions: 300/170/H200 mm -Weight: 1.4 kg

Gamybos metai: 2018, Sąlyga: naudotas, Computer Monitor, Screen, TFT Industrial Monitor -Monitor: TFT industrial monitor removed from Mikron UME 600 CNC milling machine -Type: 12.1" TFT industrial monitor 2363130 -Dimensions: 400/320/100 mm Knsdpfercnmzsx Acujc -Weight: 3.1 kg

Sąlyga: naudotas, CNC control, operator panel, machining center operator panel, operating unit, operator panel, control unit Ksdpsprb Dvefx Acuenc -Manufacturer: Mikron, control unit -Type: TCD 22 - DIN 8659 -Circuit board: WW TCD 22 control unit 104.73.20.042 -Individual components: see photos -Dimensions: 480/130/H240 mm -Weight: 5 kg

Sąlyga: geras (naudotas), Clamping table, angle plate, T-slot table, rotary table, milling machine table Kodpfx Acerbm Udjusnc - Manufacturer: Mikron, milling machine table (T-slot table) from CNC machining center UME 600 - Table surface: 530 x 900 mm - T-slots: slot width 14 mm, slot spacing 63 mm - Transport dimensions: 900/530/H390 mm - Weight: 248 kg