Mikasa Mtx 70 pirkti naudotą (37 541)

Sąlyga: labai geros būklės (naudotas), Type: VCS 7034-5 Climatic Test Chamber, Water-Cooled Test chamber volume: 335 litres Performance Data for Temperature Testing: Temperature range: -70 to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Rate of change: Cooling: 3.5 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Performance Data for Climatic Testing: Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm 1 port, Ø approx. 50 mm, left side 2 ports, Ø approx. 125 mm, left side 1 port, Ø approx. 125 mm, right side Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Nominal power: 10 kW Nominal current: 21 A Sound pressure level: 64 dB(A) Credpfx Aoxufypjdmjk Cooling water consumption: 1.4 m³/h Refrigerants: R404A / R-23 For your safety as a buyer, please note the following: The following steps are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) Please feel free to contact us by phone for further questions.

Sąlyga: naudotas, Gamybos metai: 1990, No. 04502 Veneer Press Ott JU 2511/70 Used, Year of manufacture: 1990 Electrohydraulic, approx. 15 kW Aluminum heating plates 2550 x 1100 mm (L x W) Electric heating 4 hydraulic cylinders, each with 80 mm diameter Total pressing force: 70 tons Specific pressing pressure: 2.5 - 3.5 kg/cm² Opening width: 400 mm Push-button control for open – close – stop Pressure monitoring with automatic readjustment Adjustable limit switch for specific opening width HAWE pump Emergency stop safety pull cord Includes electric cable and 32 A connector Includes electrical diagrams, operating manual as PDF file Transport dimensions approx. 2900 x 1400 x 2000 mm (L x W x H) Weight approx. 3000 kg To avoid possible misunderstandings, on-site inspection by appointment is possible and recommended. Crjdpfxexwp S Ij Admok Sale as-is Technical specifications, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, with no guarantee Subject to prior sale No warranty applies to used machines. Sale is 'as seen'. Payment terms: Prices plus statutory VAT, payment before collection or shipment Delivery terms: ex works

Sąlyga: naudotas, didžiausias leistinas svoris: 31 480 kg, bendras svoris: 39 000 kg, ašių konfigūracija: 3 ašys, pirmoji registracija: 07/2013, kita apžiūra (TÜV): 07/2026, krovimo vietos ilgis: 17 600 mm, krovinių skyriaus plotis: 2 550 mm, bendras plotis: 2 550 mm, Gamybos metai: 2013, Įranga: ABS,

Sąlyga: paruoštas naudoti (naudotas), Procesai: dujinis cementavimas / karbonitrinimas, grūdinimas apsauginių dujų aplinkoje, atkaitinimas, normalizavimas, perlito formavimas Įrenginį sudaro: Crjdpfx Adsug T Hgjmek - 2 naudotos daugiafunkcinės kamerinės krosnys, gamintojas: IVA, tipas: MKG 2s, 70/95/110, pagaminimo metai: 2007, dujinio šildymo - 1 naudota atleistinė krosnis, tipas: KEL 70/95/100-500°C, elektrinio šildymo - 1 naudota apsauginių dujų atleistinė krosnis, tipas: RH 70/95/110 gs, dujinio šildymo - 1 naudota drėkinimo purškimo sistema, tipas: DFS 1100 - 1 naudotas įkrovimo vežimėlis, varomas elektros varikliu - 1 naudotas kėlimo stalas - 1 naudota visiškai automatinė PROSYS/2 procesų valdymo sistema - 1 naudotas įkrovimo žurnalas - Į komplektą įeina turimos atsarginės dalys

Sąlyga: geras (naudotas), Kodas: 0028 Gamintojas: OMG Modelis: EPM/70 Automatinė žaliuzių laštakavimo (lizdų frezavimo) staklės Techniniai duomenys Veleno jungtis: 10 mm Grąžto greitis: 12 000 aps./min. Vienu metu apdirba 2 profilius 18 galimų žingsnių su viena dantyta juosta Laštakos (lizdo) gylis iki 25 mm Grąžto variklis: 1,5 AG Stumdomo stalo variklis: 1 AG Iki 20 laštakų per minutę Crjdpsxvxpgefx Admek Kampas nuo 90 laipsnių (vertikaliai) iki 0 laipsnių (horizontaliai) Maksimalūs profilio matmenys: 100 x 120 mm Automatinis sustabdymas Bendri matmenys: staklės – 1500 x 1000 x 1200 mm (h) – 490 kg; Lentyna – 3200 x 100 x 200 mm (h) – 30 kg

Gamybos metai: 2017, Sąlyga: beveik kaip naujas (naudotas), NESPRESSO kavos kapsulių gamybos linija Susideda iš šių komponentų: Poz. 01) Įpurškimo formos kapsulėms, gamintojas: FOSTAG AG Cedpfx Adew Nriuomerk 1,0 vnt. forma su 16 ertmių 1,0 vnt. forma su 32 ertmėmis Poz. 02) Dviejų komponentų liejimo mašina, Gamintojas: ARBURG, tipas: 720A3200-800, pagaminimo metai: 2017 Poz. 03) Kapsulių išėmimo įranga 16 ertmių, gamintojas: Beck, pagaminimo metai: 2019 Poz. 03) IML sistema kapsulių išėmimui 32 ertmių, gamintojas: Beck, pagaminimo metai: 2019

Sąlyga: labai geros būklės (naudotas), Weiss Temperature Chamber Here we offer a Weiss temperature chamber. Weiss temperature chamber, air-cooled, with Weiss condenser cooler Test chamber volume approx. 990 liters Data for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation at the center of the usable space: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5): Heating: 5 K/min Cooling: 5 K/min Heat compensation: max. 2750 W Standard equipment installed: R1: NW 125 mm L1: NW 50 mm Dimensions: Test chamber dimensions: Width 1100 mm × Depth 950 mm × Height 950 mm Unit dimensions: Width 1390 mm × Depth 1525 mm × Height 1995 mm Maximum load capacity (evenly distributed) of test chamber floor: 150 kg Per shelf grate: 50 kg Total load on shelf supports: 100 kg Operating data: Test chamber lighting: Halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ±10% 50 Hz Rated power: 27.0 kW Rated current: 42.02 A Heat emission (water-cooled cabinets): max. heat emission to ambient 1.3 kW Cedpfx Aep Dun Aodmork Noise measurement: Sound pressure level: approx. 64 dB(A) Refrigerant: (converted to R-452a) Weight: approx. 960 kg Model: WT11-1000/70/5 For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see image) (Specifications and technical data are subject to change and errors!) We are happy to answer further questions for you by phone.

Gamybos metai: 2017, Sąlyga: geras (naudotas), Extraction wall made of sheet steel Capacity: 3,000 m³/h Crjdjum R Hropfx Admek

Sąlyga: naudotas, didžiausias leistinas svoris: 31 480 kg, bendras svoris: 39 000 kg, ašių konfigūracija: 3 ašys, pirmoji registracija: 07/2013, kita apžiūra (TÜV): 07/2026, krovimo vietos ilgis: 17 600 mm, krovinių skyriaus plotis: 2 550 mm, bendras plotis: 2 550 mm, Gamybos metai: 2013, Įranga: ABS,

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2022, veikimo valandos: 676 h, mašinos/transporto priemonės numeris: 50803583844694, keliamoji galia: 272 kg, bendras svoris: 21 090 kg, gaminio plotis (maks.): 2 490 mm, darbinio aukščio: 43 150 mm, variklio tipas: dyzelinis, gamintojas: Genie Crjdow Snzfepfx Admek

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, bendras svoris: 2 500 kg, vėsinimo galia: 50 kW (67,98 AG), tūrio srautas: 10 m³/val, Das Air Liquide Kühl- und Heizsystem ist ein Prozessthermostat, das für eine optimale und präzise Temperaturregelung bei jeglichen Anwendungen entwickelt wurde, die schnelle, exakte und leistungsstarke Thermoregulierung zwischen -80°C und +70°C erfordern. Das Temperiergerät konditioniert das Wärmeträgermedium Syltherm XLT im geschlossenen Kreislauf. Für den Kühlprozess wird flüssiger Stickstoff (LIN) als kryogenes Medium eingesetzt, um das Wärmeträgermedium schnell abzukühlen. Die Erwärmung erfolgt über einen integrierten elektrischen Widerstandsheizer bis zu einer maximalen Betriebstemperatur von +70°C. Das konditionierte Medium wird aus dem Gerät zur externen Anwendung geführt und ermöglicht so eine präzise Prozess-Temperaturführung. Die Anlage ist vollständig automatisiert und gewährleistet eine präzise sowie zuverlässige Prozessregelung bei minimalem manuellem Aufwand. Originale Papierdokumentation liegt bei. Csdpfx Adowt A Eijmork • Baujahr: 2016 • Hersteller: ALTEC GmbH • Zustand: Voll funktionsfähig • Kälteleistung: 50 kW • Betriebstemperatur: -80°C bis +70°C • Automatisierung: Vollautomatischer Betrieb • Dokumentation: Originale Papierdokumente enthalten • Wärmeträger: Syltherm XLT • Volumenstrom Wärmeträger: 10 m³/h • Material: Edelstahl 304L (1.4541) Abmessungen: • Breite: 1.800 mm • Höhe: 2.000 mm • Länge: 3.500 mm • Gewicht (leer): 2.500 kg • Isolierung: PUR-Isolierschaum und Aluminium-Blechverkleidung Mögliche Anwendungen: • Pharmazeutische Industrie: API-Synthese, Reaktorkühlung, Impfstofflagerung, Biotechnologie. • Lebensmittelverarbeitung: Schockfrosten, Qualitätserhaltung. • Luft- und Raumfahrt / Automobil: Komponententests, Materialbehandlung. • Elektronik: Fertigung und Test. • Materialwissenschaften: Kryogenes Mahlen und Verarbeitung. • Forschung & Entwicklung: Jegliche Anwendung mit präzisen thermischen Zyklen. Weltweiter Versand möglich. Bei Interesse oder Fragen kontaktieren Sie uns gerne! Besichtigung in Liestal, Schweiz möglich.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 8 000 h, Funkcionalumas: visiškai funkcionalus, 1 used two-component injection moulding machine Manufacturer: ARBURG Model: 570A2000-400/70 Year of manufacture: 2022 Clamping force: 200 tons Tie bar spacing: 570 x 570 mm Crodpfx Asvftnajdmsk Min./Max. installation height: 350 mm Opening stroke: 1,000 mm Screw DN 1: 35 mm Max. shot volume: 154 cm³ Shot weight in PS: 141 g Screw DN 2: 25 mm Max. shot volume: 44 cm³ Shot weight in PS: 40 g Control: Selogica Technical specifications available on request.

Gamybos metai: 2022, Sąlyga: labai geros būklės (naudotas), Weiss Model: T/800/70/10 Water-cooled Crsdpfx Adjvxrwgjmek External dimensions (H x W x D): 2085 x 1415 x 2810 mm Test chamber dimensions (H x W x D): 950 x 1100 x 800 mm Volume: 800 liters Minimum temperature: –72 °C Maximum temperature: +180 °C Temperature change rate, cooling: 12.0 K/min Temperature change rate, heating: 12.0 K/min Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature uniformity: ±0.5 to ±2.0 K Temperature gradient: ≤2.0 K Heat compensation at +20 °C: 8000 W Power connection: 3/N/PE AC 400 V ±10% 50 Hz or 3/N/PE AC 440 V ±10% 60 Hz Rated power: 30 KW Rated current: 57 A Operating hours: approx. 10 (Never used) Condition: pre-owned / used Weight: 1600 kg Scope of delivery: (See picture) Sale ex location! (Specifications and technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Sąlyga: naudotas, Gamybos metai: 1970, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: D32L/7745, Pasiūlymo numeris: D32L/7745 Mašinos tipas: Spyruoklių vijimo staklės Gamintojas: WAFIOS Modelis: SFM25/70 Cjdpfswi S Ifox Admerk Gamybos metai: 1970 Vielos skersmuo: 0,5-2,5 mm Kojelės ilgis: maks. 80 x 120 Našumas - vnt./min: 80 Vieta: Mūsų sandėlyje

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 12579, Rotor diameter: 450 mm Rotor width: 650 mm 3-knife rotor Codpfx Adokyzavomsrk 2 rows of stator knives Infeed opening approx. 450 x 650 mm Drive motor: 37 kW

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, veikimo valandos: 3 174 h, mašinos/transporto priemonės numeris: 49076683571542, keliamoji galia: 272 kg, bendras svoris: 21 090 kg, gaminio plotis (maks.): 2 490 mm, darbinio aukščio: 43 150 mm, variklio tipas: dyzelinis, gamintojas: Genie Crjdow Rzyfspfx Admsk

Sąlyga: geras (naudotas), Clamping cube: with T-slot, solid design Slot width: 14 mm Dimensions: see photos / technical drawing Measurements: 215/70/H105 mm Crodowuz Raopfx Admjk Weight: 5.1 kg

Sąlyga: labai geros būklės (naudotas), Weiss Model: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss Climate Chamber, Water-Cooled (Test Chamber Explosion-Proof) INERTING WITH NITROGEN / EXPLOSION-PROOF TEST CHAMBER Technical Data: Test Chamber Designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 1660 mm Test chamber volume: approx. 600 liters Cooling / Heating Operation: -70 to +180°C Climate Operation: 10 – 95°C Humidity: 10...98 % rH Temperature Change Rate: Cooling approx. 2.5 K/min Heating approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A Required fuse (on site): 32 A slow-blow Permissible test specimen weight: Total load of grates: 80 kg Test chamber floor: 80 kg, insert grate: 40 kg Weight: 800 kg Refrigerant: R 404A/R 23 (The evaporator of the air conditioning unit was replaced) Important safety information for you as buyer: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant Credpfx Asv Ewy Hedmsk 3. Leak test with certificate 4. Upon successful inspection, chambers are subjected to documented test runs. Condition: used / gebraucht Scope of delivery: (see picture) (Specifications and technical details subject to change and errors!) For further questions, please feel free to contact us by phone.

Sąlyga: geras (naudotas), Clamping cube: with T-slot, solid design T-slot width: 14 mm Credpfxswuz Ils Admsk Dimensions: see photos / technical drawing Measurements: 210/70/H80 mm Weight: 5.2 kg

Sąlyga: labai geros būklės (naudotas), Weiss Temperature Test Chamber We are offering you a Weiss temperature test chamber. Weiss Temperature Test Chamber, water-cooled Technical specifications: Model: WT1-600/70 External dimensions (excluding hinges and door lock): Height: 1980 mm, Width: 1085 mm, Depth: 1655 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Test chamber volume: approx. 600 liters Cold / heat operation: -70 to +180°C Temperature change rate: Cooling approx. 2.5 K/min Heating approx. 4 K/min Power supply: 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Maximum permissible test load: Total rack load: 80 kg Refrigerants: R404A + R23 Weight: 600 kg Type: WT1-600/70 Important information for your safety as the buyer: The following steps are carried out on our test chambers before delivery: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerants 3. After successful inspection, the chambers undergo a test run, monitored with calibrated equipment. Condition: used Scope of delivery: (see image) (Specifications subject to change and errors excepted!) If you have any further questions, we are happy to assist you by phone. Credpfx Adeirmg Asmjk

Sąlyga: geras (naudotas), Weiss Type: WK1-1000/70 Weiss Climate Test Chamber, Water-Cooled (Refrigerant converted to R-452A) Control Unit: “Touchpanel” All control and operation commands can be executed simply by touching the function icons on the touch panel. Feedthroughs The test chamber is equipped with feedthroughs on both the right and left sides. These feedthroughs allow measurement lines and test devices to be routed into the test chamber space. Feedthroughs: 1 feedthrough ∅ 125 mm installed on the right 1 feedthrough ∅ 50 mm installed on the left Volume: 990 liters Test Chamber Interior Dimensions: Test chamber: Width 1100 mm, Depth 950 mm, Height 950 mm Housing: Width 1385 mm, Depth 1850 mm, Height 1980 mm Data for temperature testing: Minimum temperature: –70 °C Maximum temperature: +180 °C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature homogeneity: ± 0.5 to ± 2 K Temperature change rate (heating): 4 K/min Temperature change rate (cooling): 2.5 K/min Max. heat compensation: 2750 W Data for climate testing: Temperature range: +10°C to +95°C Humidity range: 10 to 98% r.h. Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature homogeneity: ± 0.5 to ± 1 K Temporal humidity deviation: ± 1 to ± 3% r.h. Operation data: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 29A Rated power: 19.8 kW Refrigerants: R-452A / R23 Weight: approx. 910 kg Important information for your safety as a buyer! The following checks and preparations are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, replenishment with legally compliant refrigerants 3. Leak test with certificate 4. After a successful inspection, the chambers undergo a documented test run. Codpjrvx Ezefx Admjrk Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors in the listed data!) If you have any further questions, we will be happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), Weiss Temperature Test Chamber We are offering a temperature test chamber for sale. Weiss Temperature Test Chamber, Water-Cooled Technical data: Model designation: WT-600/70 External dimensions (with hinges and door lock): Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions (without hinges and door lock): Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Test chamber capacity: approx. 600 liters Cooling / Heating operation: -70°C to +180°C Temperature change rate: Cooling: approx. 2.5 K/min Heating: approx. 4 K/min Cjdpfxoiqk Abs Admsrk 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Site circuit protection: 32 A slow-blow Permitted test specimen weight: Total load on shelf supports: 80 kg Test chamber floor: 80 kg, Shelf rack: 40 kg Refrigerant: R 404A / R23 Weight: 675 kg Type: WT-600/70 Important safety information for you as a buyer: The following procedures are carried out in advance on our advertised chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After a successful check, the chambers are subjected to a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see image) (We reserve the right to make changes and correct errors in the technical data and information provided!) If you have any further questions, we will be happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Type: VT 7060 Vötsch VT 7060 Temperature Chamber 600 Litres with Simcon 32-net Controller Cabinet is air-cooled Reliable climate chamber for demanding environmental simulations Ideal for laboratory, development & quality assurance. Device Description: For sale is a professional temperature chamber from the manufacturer Vötsch Industrietechnik, model VT 7060 with SIMcon 32-net controller. This high-performance unit is suitable for a wide range of demanding environmental simulations, from material testing and electronics testing to long-term climate exposure. Technical Data (excerpt): Model: Vötsch VT 7060 Internal volume: approx. 600 litres Temperature range: –70 °C to +180 °C Temperature deviation at steady state: Over time: ±0.1 K to ±0.5 K Spatially: ±0.5 K to ±2.0 K Temperature change rate (without test specimen): Heating: 4 K/min Cooling: 3 K/min Controller: SIMcon 32-net with touch panel Interfaces: RS232, optionally RS485/422 1 × port NW 50 mm left side 1 × port NW 125 mm left side 2× port NW 125 mm right side External dimensions (approx.): Width 1090 × Height 1960 × Depth 1995 mm Internal dimensions (approx.): Width 800 × Height 800 × Depth 950 mm Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 9.1 kW Rated current: 19.0 A Refrigerant: R 404A and R 23 Weight approx. 675 kg For your security as a buyer, please note the following information! The following steps are conducted in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Shipping / Collection: Collection preferred Shipping via freight forwarder on pallet throughout Europe possible. (Shipping costs according to effort) Condition: used Cjdpswybb Nofx Admsrk Scope of delivery: (see image) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Sąlyga: labai geros būklės (naudotas), Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch temperature test chamber, water-cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Rate of temperature change (cooling): 7.5 K/min Rate of temperature change (heating): 7.5 K/min Thermal compensation at +20°C: 3000 W Thermal compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 450 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1280 mm, Height 1575 mm Observation window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Crsdpfxjhh H Hio Admjk Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10.5 kW Rated current: 22 A Fusing, to be provided on-site: 32 A slow-blow Sound level at 1 m distance (free-field measurement): < 69 dB(A) Side port: 50 cm / 125 cm The chamber is water-cooled Refrigerants: R 404A and R 23 Weight: approx. 460 kg Type: VTS 7018-5 For your security as a buyer, please note the following information! The following procedures are performed on all chambers we offer prior to sale: 1. Functional test and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, monitored with calibrated instruments. Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and specifications excepted!) We will be happy to answer further questions by phone.

Sąlyga: labai geros būklės (naudotas), Weiss Model: WK3-340/70 Weiss Climate Test Chamber, Air-Cooled Control Unit: "Touch Panel" All control and operating commands can be executed by simply touching the functional icons on the "Touch Panel" control unit. Adjustable Feet To compensate for uneven floors and to ensure adequate ventilation of the machine compartment, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on both the right and left sides. These allow measuring cables and test devices to be routed into the test chamber. Standard feedthroughs installed: Right (R1): nominal width 125 mm Left (L1): nominal width 85 mm Volume: 335 liters Test Chamber Internal Dimensions: Height: 750 mm, Width: 580 mm, Depth: 765 mm External Dimensions: Height: 1775 mm, Width: 870 mm, Depth: 1600 mm Specifications for Temperature Tests: Minimum temperature: –72°C Maximum temperature: +180°C Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature uniformity (spatial): ± 0.5 to ± 1.5 K Temperature change rate, cooling: 3 K/min Temperature change rate, heating: 3 K/min Specifications for Climate Tests: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% r.H. Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature uniformity (spatial): ± 0.5 to ± 1 K Humidity deviation over time: ± 1 to ± 3% r.H. Operating Data: Test chamber lighting: Halogen bulbs 2 x 24V, 50W Crjdpfx Aov Sr Hzjdmok Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 16 A Rated power: 4.9 kW Fuse (on-site): 16 A slow-blow Refrigerants: R-452A/R23 Weight: approx. 585 kg For your security as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functional verification and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Modifications and errors in technical data are subject to change!) We will be happy to answer further questions by phone.